How to set six WRT300N wireless router use the same SSID

I have six WRT300N wireless router and cannot setting shared the same SSID....
Somebody can help me?

please explain like how are you trying to set up these routers..... even if you set up these routers using the same ssid , they won't communicate with each other wirelessly....

Similar Messages

How to sync 2 different Mac users using the same Apple ID and with out mixing each other info?

How to sync 2 different Mac users using the same Apple ID and with out mixing each other info?
We are two people using three difrent Macs, 1 Iphone and 1 Ipad with separate USERS on each Mac but sharing the same Apple ID: xxxxxx
I set up the first user to iCloud and it was OK but when I set up the second user to use iCoud the first users's info gets mixed with the second user's info?
Do we have to set up a diffrent Apple ID for each other?
Sometime ago I added my friends E mail (yyyyy) to the main Apple ID (xxxx) as for using his E mail account (to separate our e mail accounts, and it's working ok) but now when I try to create a new apple ID whith the same friend's e mail (yyyyyy) it says that his mail (yyyyy) is already an apple ID when the Apple ID is really my E mail (xxxxx)... any clue?
Thanks

I believe because you migrated from a Nokia to an iPhone you need to register the Bn phone number with your Apple ID so it can be used for iMessage. The Pn number seems to be the only one registered
Go here > https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
Manage your Apple ID and see if that does the trick
Hope that helps

How can i create multiple accounts but use the same itunes?

how can i create multiple accounts but use the same itunes?

Hi iCloud is Making Me Go Crazy,
You will need to create a new Apple ID for your GameCenter and iCloud services. You can continue to use the current Apple ID you share with your Mom for access to iTunes Store purchases if you wish.
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622
Cheers,
- Judy

HT5538 How do you separate multiple iOS devices using the same apple id account for Face Time calls and iMessaging?

How do you separate multiiple ios devices using the same apple id account for Face Time calls and iMessaging?

The only way I have seen is to have each device use a if fervent email account, if they all are on the same email the FaceTime connection is either to a phone number or to an email address. If they ar all on the same email, it is up to the user to decide which to use.

How to Set Up 2 Skype Accounts on the Same MacBook Pro Computer

How to Set Up 2 Skype Accounts on the Same MacBook Pro Computer

http://community.skype.com/t5/Mac/How-can-I-run-two-Skype-accounts-on-a-Mac/td-p /169126
http://everydaylife.globalpost.com/run-two-skype-accounts-same-mac-computer-3524 6.html
http://www.profesional.co.cr/technology/multiple-skype-accounts-mac-os-or-window s-same-time/
Note that you posted in the Mac Pro desktop forum

How to Set JFilechooser to show file with the same extension in the filetyp

How to Set JFilechooser to show file with the same extension in the filetypes??
help

I also don't understand, but if you mean how to display only files with a certain extension in your JFileChooser then you should have a look at the JFileChooser API:
http://java.sun.com/j2se/1.5.0/docs/api/javax/swing/JFileChooser.html
The introduction shows an example of how to do that.

I want to use the same SSID in two sites (central y remote)

I have several AP in H-REAP mode, one of them is in a remote location anthe other are in the central location. I want to use the same SSID in both locations with differents VLANS.
In the central site, i have 3 WLANS (SSID) whit 3 different VLAN eachother. I put the local swicthing in one SSID that I want to use in the remote site. In the remote location the users can authenticate and everything works fine but in the central location that SSID doesnt work, the user in the central location can not authenticate.
It seems that i can not use the same WLAN (SSID) and use it en both locations checking the local switching.
What can i do?
Many thanks for your help

Look I have 2 two VLANs Interfaces (vlan 252 & Vlan253) created on WLC, beside the management VLAN (ID 254), and there are 8 AP´s installed at the central location, each AP has been connected to my CORE Switch through switch ports mode Access vlan 254.
th aeuthentitcation i have been used is "LOCAL: WPA-WPA2-PSK" in both locations (Central and remote). In the remote sites, tha AP is connected to a cisco switch through switch port mode trunk, and I use VLAN 251. When the local switching feature is activeted on WLC, I can map the VLAN 251 (in te remote site) to the SSID I am using inthe central site and everything works fine but in the central locations the user can associste to he AP but they can not receive IP from the appropiate VLAN.
I don t know what parameter have to change....
Can you helpme?

How to set up AirPort + Time Capsule On the Same Network but make it so only i use it?

Ok so i am planning on getting the AirPort + Time Capsule in a few weeks, and i have seen many peole talk about how there is a right way and wrong way to set it up because apperently the bad way makes it run slow? Well i have two questions, one is how do i set it up the right way to use it to the full potential to use the new beamforming feature? And my second question which is kind of a problem is that I have internet already but my other brothers use it and i told them about pitching in buy it and they dont want to because they think its pointlesss, so what i want to know is if I can connect it to my existing wi-fi but at the same time like create a diffrent network so that only i can use it? (ex. have my wifi, 2WIRE123 for example, and then some how connect the ethernet cable to the airport + time caplsule and create a new network like 2WIRE124 so they would both basiaclly be using the same internet connection but separated to 2 diffrent networks?) Thank You.

so what i want to know is if I can connect it to my existing wi-fi but at the same time like create a diffrent network so that only i can use it?
Sorry, but no.
If you can connect the AirPort to the 2Wire router using a permanent wired Ethernet connection, then you can configure the AirPort to create a new wireless network with its own wireless network name and password.

How to set up different virtual LANs (using the E3200)?

Hi.
I would like to set up different virtual LANs (using the E3200) so that I can have two different networks that can't access each other.
The E3200 is connected to a modem for internet access.
I would like both networks to have access to the internet.
Does the E3200 alone support creating virtual LANs?
If not, is there another way I can meet the requirement using the E3200 alone (using something other than virtual LANs)?
I'm ultimately thinking that I would need at least one other router.
So for example,
Router A (E3200) is connected to the modem and setup for DHCP using a LAN IP range 192.168.1.1/24.
Router B is connected to Router A and setup for DHCP using a LAN IP range 192.168.2.1/24.
In this way devices connected to Router A should not have access to devices connected to Router B and visa-versa, correct? For example, Device X connected to Router A cannot ping or browse files on Device Y connected to Router B and visa-versa, correct?
Would I need to setup anything else on Router B? For example, do I need to setup DNS settings so that devices connected to Router B can connect to the internet without issue? Would I need to specify that these virtual LANs are not bridged, and on which router, or both?
I already know how to set up a static IP, DHCP, LAN IP ranges, and static DNS settings on a router, etc.
In regards to wireless devices, I am thinking they would follow the same pattern; so wireless devices connected to Router A (E3200) have access to other wired and wireless devices connected to Router A but not to wired or wireless devices connected to Router B and visa-versa. However, if wireless devices currently don't have access to wired devices also connected to Router A, then that is fine for now.
Thank you very much!
-Rami
Solved!
Go to Solution.

The E3200 has no VLAN support according to the manual. There's no way to configure two separate networks with this router alone.
You will need to add network electronics.
Ex:
Managed Switch with VLAN
Another wireless router with VLAN
If your modem supplies multiple public or private IP addresses then you could put a switch after the modem and two wireless routers attached to the switch.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

How do I set up a second iphone using the same iTunes account?

How do I set up a second iphone on the same iTunes account but give my wife ability to have her own calendar and contacts?

Create a separate iTunes library for each device. Note: It is important that you make a new iTunes Library file. Do not just make a copy of your existing iTunes Library file. it will work. I am using it through this

My daughter has a ipodtouch that we have set up now i need to set up a ipod shuffle how do i do this can i use the same account or start another one

my daughter has a ipod touch now i need to add a ipod shuffle i have no idea how to get started can i use the same account i can't even figure out how to sync it HELP

yes you can have multiple devices on one account just not in the same library before you sync it create a new library by:
If you are using Windows, hold down the Shift key and from the Start menu and choose All Programs > iTunes > iTunes.
Then add the songs you want
THen yuo can sync sync it by plugging in the usb cord the computer then plug in the ipod to the cord that it came with

Can you save your own theme and button set up so I can use the same format

Can you save your own theme and button set up, so I can use this same format for similar content. I want to keep the button content and the theme the same without having to create it everytime? I am trying to streamline the process for multiple dvd's with the same menu and buttons but different content. Does that make sense?

I am only new to this caper too, but I am pretty sure you can save a theme as a favourite by pressing the "save theme as favourite" button under file. If you have edited an existing theme but don't want to lose it, make sure you untick the replace existing button.

How do i manage multiple ios devices using the same apple id

how do i keep my iphone and ipad private while using other devices with the same apple id?

if you want to share app don't use the same appleID use family sharing
if you do use the same appleID turn off imessage and be prepared that you will never be able
to message between the devices or use facetime between them in the world of apple the appleID is 1! indentity

How to run 2 different Firefox versions using the same profile

Is it possible to run 2 different Firefox versions using the same profile and still have browsing history saved? I used to be able to do that up until a week ago. What happened was I was using Firefox version 3.6.28(a very old version of Firefox) which I need to use sometimes and then the current version, 36.01. Earlier I would use both my versions of Firefox and the history would be saved if I used both versions but now when version 36.01 came out, its not saving for some reason. Is this a bug? The history is saving during the current session, but say I close out of Firefox and then go back to Firefox, it will still be saved but when I go to my old version of Firefox, the history is saved but then after I close out of that the history on my new current version is all gone and it starts me all fresh, is there a way to get rid of this so that the history will always be saved even if i switch between versions? I could do that before up until Firefox 35.01 but Firefox 36 isnt saving the history from the old version, is this a bug or not? Now I have to create a separate profile for each Firefox so the history I use on the old version is only saved on that version and the history I have on the new Firefox is another profile so that history from the 2nd profile remains but I dont want that. I want to be able to use the same profile so that the same browsing history can be saved using both versions like it was before, I hope people can understand my problem. If not I can further explain, thanks.

@ the-edmeister, I understand that the 2 versions are completely different, however how come the history was saving fine when I switched between firefox 3.6.28 to the current one which was Firefox 32, 33, 34, 35 etc? Like I'm surprised how come now at Firefox 36 this problem started, Firefox 36 isnt that much different from Firefox 35 but yet Firefox 35 was still saving my browser history from the old 3.6.28 version, my 3.6.28 version never upgrades but the new Firefox keeps upgrading whenever there is a new release out automatically and then all of a sudden when the new version of 36.01 came out all my history was gone, so isnt Firefox 35.01 also very much different from 3.6.28 as much as 36.01 is? I hope you got what I meant, thank you for helping.

How to create more than one VIP use the same IP address and different port(e.g. 80 and 443)

Hi,
I use SCVMM LB Provider deploy network. I want to create 2 VIP use the same virtual IP but use the different port.
for example:   VIP address 1.1.1.123   use port 80 for HTTP   and port 443 for HTTPS
However,
the following problems encountered, when I create the second VIP.
PS C:\Windows\system32> New-SCLoadBalancerVIP -Name "vip11" -LoadBalancer $LB -IPAddress "1.1.1.123" -LoadBalancerVIPTemplate $VIPTemplate1 -LoadBalancerProtocol $Protocol1 -LoadBalancerHealthMonitor $HM1
New-SCLoadBalancerVIP : A virtual IP (VIP) address with the specified name (vip11) or
address (1.1.1.123) already exists on the load balancer (xxx). (Error ID: 13691)
Specify a different name or IP address and try again.
To restart the job, run the following command:
PS> Restart-Job -Job (Get-VMMServer localhost | Get-Job | where { $_.ID -eq
"{b41a77eb-ae0b-490a-8948-662a529b1d8c}"})
At line:1 char:1
+ New-SCLoadBalancerVIP -Name "vip11" -LoadBalancer $LB -IPAddress "1.1.1.123" -Lo ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : ReadError: (:) [New-SCLoadBalancerVIP], CarmineException
    + FullyQualifiedErrorId : 13691,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.Ne
   wSCLoadBalancerVIPCmdlet
PS C:\Windows\system32>
any suggestions ?
Thank you in advance !

I really don't know DDE very well. It is usually recommended that you switch to using ActiveX. You may not be correctly configuring the netDDE server. There is an example in the reource library that shows how to do this. You may also want to look at the DDE advise examples that came with LabVIEW 5.1 and earlier.

How to set six WRT300N wireless router use the same SSID

Similar Messages

Maybe you are looking for