How to set speaker and headphone volume together T540p

My new Thinkpoad sets the headphone and speaker volume separately. I am always adjusting as I use headphones and speakers at different times frequently.
I would lke the volumes to be synchronized and change both together using the volume key.
Can this be set?
thanks all

Only if you?switch to?Audio Creation, open the mode console, set the speakers as 4.0 and in the 'Multi-Channel Wave' tab enable the bus routing for Fronts and Rears in the 'Wave' column. The downside is that this will disable EAX 4/5. BTW it's better to plug the headphones in the line-out (especially if the hp are low-impedance), the opamp driving the line-out has more output current headroom.

Similar Messages

I just update my iphone 4s to ios 7.0.4 and update my macbook pro to ios maveric. Now, my iphone 4s does not sound form the speaker and the volume button up and down also does not work.I could hear the sound through the earphone. Also the airplay disapear

i just update my iphone 4s to ios 7.0.4 and update my macbook pro to ios maveric. Now, my iphone 4s does not sound form the speaker and the volume button up and down also does not work.I could hear the sound through the earphone. Also the airplay disapear. Please advice how to downgrade to the previous OS

Please try going to your settings area of your display. Click on General and go to 'reset all settings'
Good luck!

Both Portege R700 speaker and Headphone makes sound

Hi,
My name is Anbu, I am using Portege R700 Series. I am facing a strange problem
When i am using head phone for listening (I am plugging only speaker pin - Green colour), it works properly i.e i am hearing sound from head phone only.
If I *plug both Mic & speaker pin* of the headphone (Both Red & green colour pin) into the respective slots, both *laptop speaker and headphone speaker makes sound.* Ideally only +head phone should work, not laptop speaker+
Help me in finding the what is the problem behind this & how to resolve
Regards
ANBU

Hi mate
Please check the settings in the +control panel -> sound -> recording tab+
Click right and mark the options: enable hidden devices and enable disabled devices
Then you should be able to get the properties of mic and stereo mix
Play around with all the available options.
<img src='http://img97.imageshack.us/img97/9074/captureyeb.png' width='550px'>

Sound is playing both on speaker and headphone

I have HP ENVY 15-j048tx Notebook PC. when attach heaphone to my laptop the sound is playing both on speaker and headphone. How to solve this please help.
Thank you.

Hello Dev2810,
Welcome to the HP Forums!
I understand the notebook produces sound from both headphones and speakers. I will do my best to assist you! The only troubleshooting I could suggest in this thread: Headphones plugged in, but speakers are still playing sound
I provided these steps a while ago I noticed it resolved all instances of this issue, when done properly. Please try the steps and let me know what happens. Thanks!
Mario
I worked on behalf of HP.

How to set-up and use FAMILY Sharing

Can someone please explain to me in detail how to set-up and use FAMILY Sharing, none of the information I have so far found in the documentation helps at all, in fact it puts you in a constant loop giving the same information over and over again
We have quite a few devices from ipads, iphones and ipods and I need to set-up Family Sharing.
We have our main Apple ID which is linked to our Payment method, I have now got my son a new iPad, I have created his Apple ID and set-up a link via FAMILY Sharing to our main Apple ID.
From what I read we should be able to share our purchased Apps between family members.
So I figured I would be able to get the Apps now via iTunes that are part of the FAMILY Sharing, however when I go into ITunes (latest version downloaded yesterday) I can only see the Home sharing menu item not FAMILY Sharing, so I cannot work out in Itunes how to get Apps that are FAMILY shared. So ok I will try and get Apps directly via the Ipad using the App Store. To test it is working I look for a known paid for App, I then go to download it and it is now asking me to pay for it again.
Can someone please explain to me in detail how FAMILY Sharing is supposed to work and how I get it to work please.
Thanks for your help
Greg

Hey GregWr,
Thanks for the question. The following resources provides some of the best information regarding Family Sharing. Included, you’ll find information on making sure the accounts are set to "Share my purchases”, as well as information on downloading Family Member purchases from the iTunes Purchased section. Please note that some applications are not shareable.
Sharing purchased content with Family Sharing - Apple Support
http://support.apple.com/en-us/HT201085
Which purchased content can I share using Family Sharing - Apple Support
http://support.apple.com/en-us/HT203046
If you don't see your family's shared content - Apple Support
http://support.apple.com/en-us/HT201454
Thanks,
Matt M.

My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?

My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?

There is probably a red light on inside your headphone port, indicating that the analog/digital switch in there is stuck in the digital position. Insert a headphone plug and wigle it around, especially in the horizontal plane, as you insert and remove it several times. This will usually unstick the switch and restore normal operation. If it doesn't, the machine will need to be repaired.
This has been a fairly common problem, but in most cases it is easily cured as described above.

How to set up and configure AirPort Express for AirPlay and iTunes

Saw somewhere that supposedly there were some apple written guidlines on the above topic. I have searched all over for them. Anyone know where I can get a copy to read through. Just trying to educate myself a bit and sety up another room with access to itunes, radio, etc with high quality speakers and amp off my express.

Here you go ...
How to set up and configure AirPort Express for AirPlay and iTunes

How to set up and use AirPlay

How to set up and use AirPlay

Welcome to the Apple Community.
AirPlay; When watching suitable content on the iPad, tap the screen to bring up the controls, tap the AirPlay icon and select the Apple TV. The content will then stream to the Apple TV.
Mirroring; Double tap the home screen button, swipe the application panel to the right, tap the AirPlay icon and choose the Apple TV. The iPad screen will then be streamed to the Apple TV.

How many sets of wireless headphones can I connect to my iPad at one time?

How many sets of wireless headphones can I connect to my iPad at one time?

Did you mean Bluetooth? One. Did you mean FM or infrared, driven from the 3.5mm output jack? Any number of them, assuming you use the same frequency to receive the stream.

HOW TO USE LOGICAL AND OR CONDITION TOGETHER

Please do not post subject in ALL CAPITALS
Hi All there,
How to use logical and or condition together
I wanted to use logical AND OR condition together in where clause of Select Query.
eg where xyz and or abc
Regards
Sagar
Edited by: Matt on Mar 17, 2009 1:05 PM
Edited by: Matt on Mar 17, 2009 1:05 PM

hi,
You cannot use the logical and or condition together at the same time in SQL statement. Sachin is correct while using the and and or in the same condition. You can get the data using or condition in SQL statement, and then use the delete statement of internal table using the end condition. please find the following code for the same.
select *
from dtab
where cond1 eq 'A1'
or cond2 eq 'A2'.
if sy-subrc eq 0.
delete itab where cond1 eq 'A1' and 'A2'.
endif.
regards,
Veeresh

How to set upper and lower limit for service notification in SPRO

Hello everyone,
Good morning....!!
I am new to SAP PM and to SCN as well.
I have a question on Service notification user status.
I have notification profile configured in SAP as below:
Status no      Status          Short text              Lower limit          Upper limit
5                  REGD          Registered                1                          70
10                PCKS            Pack sent                  1                          70
20                APRC            Application received 1                        70
etc..
I want the statusesto be set as navigation should only allow to go back one by one...like from APRC -->PCKS not to REGD.From PCKS -->REGD etc..not vice versa.
Can enayone explain me to how to set lower and upper limits for these according ot the above requirement.
for more details please check my attachment.
Thanks in advance..!!
Regards,
Sudha.

Once you change the status to previous status, just save the order. Then again open the order & try to change the user status.
Just I made replica of your profile. I could able to change (even without saving the order).

How to set date and time on apple tv

how to set date and time on apple tv

Assuming this is not the first time you have used your Apple TV
    1.    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    2.    Also try restarting the router.
    3.    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If this is a new Apple TV, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

How to set datapackage and Idoc

Hi
could any body tell me , How to set datapackage and Idoc in sap bw

Hi Hari,
There are 2 additional places to make these settings global:
1) Transaction SBIW on BW for SAP Source systems:
Data Transfer to the SAP Business Information Warehouse ->
General Settings -->
Maintain Control Parameters for Data Transfer
2) Transaction SPRO on BW for non-SAP Source Systems:
SAP Customizing Implementation Guide -->
SAP NetWeaver -->
SAP Business Information Warehouse -->
Links to other systems -->
Maintain Control Parameters for the data transfer
Please note the paths are from a BW 3.5 system.
Kind regards,
Dorothy

Speaker and headphones stop working on mac book pro?

Why does my speaker and headphones randomly stop working on my mac book pro? It wont work again until I restart my computer.

What model identifier is your MacBook Pro? To see this, hold the Option key and choose "System Information" from the Apple menu, and then click "Hardware" (this should be selected by defualt) followed by noting the Model Identifier which should be something like "MacBookPro6,2."
Does the system properly wake from sleep if you boot it to Safe Mode (hold the Shift key at startup to do this)?

I've updated my ipad to iso7 now the sound is distorted through the speaker and headphones, it is unusable! Is anyone else having this problem?

I've updated my ipad to iso7 now the sound is distorted through the speaker and headphones, it is unusable! I wouldn't dare to update my iphone. Is anyone else having this problem? Can't seem to find any fixes online?

A reset should fix it:
Double click the Home button. Slide up with one finger on ALL your apps to close them.
Then, Press the Sleep/Wake button + Home button and hold 15 seconds or until you see the Apple logo.
This will reset your device without erasing data, apps or settings.

How to set speaker and headphone volume together T540p

Similar Messages

Maybe you are looking for