How to set storage location in iMovie 10?

iMovie refuses to import my video files and instead gives the following error message: "No storage location set: Cannot start ingest because there is not storage location set. Please set one under Storage in Preferences and try again." However, when I select iMovie Preferences, there are only two possible commands (Clip: Apply slow-motion automatically) and (Theater: Automatically upload content to iCloud [grayed out]) neither of which appear particularly helpful in this context. In any case, when I import single clips these are "automatically" stored in updated projects, so why will this not work more generally? Many thanks

I've been able to store the contents of my camcorder on the Mac's HD. I've tried importing the clips from there and get the same result, whether I try to import one or several clips at once, it replies with the same error message as to the missing storage location/instructions. Interestingly, it will nonetheless import the first (or only) one of the clips that I highlight on the import screen.
When you suggest dragging the files, from where do you mean? The clips per se don't appear in the finder, but only on the import page. The finder show only various fragmented files that aren't complete clips (eg. separate video and index, even sound files), which is too much of a pain to deal with...
It's true that my original iMovie library was created from an upgrade, but I have since deleted the contents and attempted to reload the clips. Are you suggesting deleting the library completely and starting again, or should I just try creating another event and using that? Don't see why that shoudl work better than "updated projects", but perhaps it's worth a try...
Thanks again

Similar Messages

How to set storage location in Nokia lumia 820 for...

Hi,
I would like to know if and how to define the storage location in my Nokia lumia 820.
I have recently purchased a micro SD card by Kingston and would like to download and install apps, like games who require more storage then my Nokia 820 supports(8GB).
I saw that the only available option set is to choose the the storage for music + videos and pictures from settings/phone storage but no option set could be found for the apps or others.
Please help me with some guidelines or with a proper workaround as I tried unsuccessfully to find the understanding for this in various resources.
Thank you for considering my request.
Vlad Zaicescu
Solved!
Go to Solution.

You can't install applications, Games on the SD Card. Only other thing that you may save on the SD Card is the Maps ..but you need THIS application. Need to log-in using the same credentials that you use on this forum to download it ...

How to create storage locations in a standalone scenario??

Hello everybody,
I need some help. I'm working with SRM 5.0. I'm making a standalone scenario. When I created the organizational plan, in the check tab, a error appears. The message is: "Define the attribute LAG". The attribute LAG is the storage location, in the extended attributes tab. I've tried defining this attribute but I couldn't.
Does anybody know how to create storage locations in a standalone scenario??
Thanks
Iván Moreno

Hi Ivan,
Look at this thread:
Creating Plants & Locations - Standalone Scenario
Storage loc is useless in a standalone scenario.
The "Check" tab makes a generic check on attributes needed for each business scenario, but does not check the integration scenario.
So you can get rid of this error message.
You can even deactivate this check on this particular attribute in table BBPV_APPL (SM30), for Confirmation & SC applications.
Rgds
Christophe

Please guide me how to include storage location to existing material master

Hi Guru's,
Please guide me how to include storage location to existing material master....
please provide step by step process or provide any documentation that would be helpfull to me...
please let me know of my question is not clear..
Thanks in advance and will give full points....
Srinivas...

Hi
First :- You can define the storage loctions in the plant under the customization :- SPRO -> Enterprise Structure ->Definition -> Materials Management ->Maintain storage location
Once defined under the plant, you can create the same storage locations in the material master
Second :- Under SPRO -> MM -> Inventory -> palnt parameters, for your plant check the field " Create Storage locations Automatically" . This will lead to create new storage locations at the time of GR, even if you have not maintained under step 1.
Hope it answers your question.
Regards,

How to set up location services on ipod touch

how to set up location services on ipod touch

Go to Settings>Privacy and turn it on.
For location the iPod uses the location of nearby wifi routers that are in Apple's database. You do not have to be connected to the network/router to use that router's location. Thus, if the iPod does not know its location it appears that the iPod can't see a nearby router that is in Apple's database. Apple continuously updated their database based on info they obtain from iPhones. No one has been able to find a way to inform Apple of a router or correct is location.
You can confirm that by going to place with a know located router like Starbucks or McDonalds

IDOC inbound: delivery confirm - set storage location at position

Hi all,
I have the issue to set with an inbound IDOC for shipping confirmation the storage location on item level. We are working with an external logistic provider so the final storage location where the goods are taken from is not not at creation time of the delivery. We have two possible storage locations.
EDI message type SDPICK cannot be used, there is no place for the storage location information LGORT.
So we tried SHPCON with process code DELV. FM: IDOC_INPUT_DELVRY
The field is in the IDOC type DELVRY03 but it is not used.
Do you have any idea how we could set the storage location on item level in the delivery with an incoming shipping / picking confirmation idoc?
Thanx a lot
regards
Hans

used a userexit in the inbound function module to get the IDOC field to the internal tables.

How to get Storage Location and Vendor details in MD03 automatically

Hi folks,
We want to create automatic PR and PO from Planned Order.
But when PR gets created in MD03, the values for Purchase organization, Storage Location and fixed vendor are blank, even after maintaining source list with fixed vendor .
How to populate these values automatically ?
I am also attaching screenshot of MD03 screen

Hello
If you are creating the orders using MRP, you should make sure that the field MRP is set to 1 on the source list. The field 'fixed vendor' is not relevant to MRP. When the vendor is selected from the source list, the purchasing organization should be also copied to the purchase requisition.
The storage location will be copied from the respective field on the material master tab MRP2.
Also take a look on the following document:
MRP: Vendor is not selected and general problems on source determination
BR
Caetano

How to set the location of a button (in an applet)

Hello
How do i set the location of the button
forexample if i want to create a button in the middle of the applet, how would i do that
Thanks :)

supahsain08 wrote:
Well i did this
Triangle.setLocation(50, 100);
(where Triangle is a buton)
it doesn't do anything, stays at the same placeIt's all about context here and there are still many unknowns here that can effect your result and that you have not told us or shown us. My suggestion to you is to consider posting an SSCCE (Short, Self Contained, Correct (Compilable), Example, a condensed program similar to your current program in that it demonstrates the problem at hand, but is the smallest bit of code that still compiles and has no extra code that's not relevant to your problem. For more info on SSCCEs please look here:
[http://homepage1.nifty.com/algafield/sscce.html|http://homepage1.nifty.com/algafield/sscce.html]
Also, when posting your code, please use code tags so that your code will retain its formatting and be readable. To do this, you can will need to paste already formatted code into the forum, highlight this code, and then press the "code" button at the top of the forum Message editor prior to posting the message. You may want to click on the Preview tab to make sure that your code is formatted correctly. Another way is to place the tag [code] at the top of your block of code and the tag [/code] at the bottom, like so:
[code]
// your code block goes here.
// note the differences between the tag at the top vs the bottom.
[/code]or
{code}
// your code block goes here.
// note here that the tags are the same.
{code}good luck, pete

How to set chapter markers in imovie 10

I am looking to set chapter markers at fixed intervals in imovie 10 as well as set custom chapter markers in family videos that I am converting from 8 mm tape. Does anyone know how to do this in imovie version 10.0.6. Thanks

Apple has removed the ability to set chapter markers with iMovie 10.
I use iMovie HD 06 or iMovie 11. (My favorite is iMovie HD 06.) Both are readily available on Amazon as part of iLife 06 or iLife 11. With these versions of iMovie one click will set your chapter markers. These markers are automatically recognized by iDVD.
http://www.amazon.com/Apple-iLife-Mac-DVD-VERSION/dp/B0007LW22G/ref=sr_1_1?ie=UT F8&qid=1424968719&sr=8-1&keywords=iLife+06

How to set the location of a button

Hello
How do i set the location of the button
forexample if i want to create a button in the middle of the applet, how would i do that
Thanks :)

Do not make duplicate posts.
http://forum.java.sun.com/thread.jspa?threadID=5293505&messageID=10240164#10240164

How to set database location for stored procedure

Post Author: Pavel
CA Forum: Data Connectivity and SQL
I've already found out that setting location is not only my problem, but I can't understand the correct decision. We using CR to create reports, accessing the data in MSSQL by ODBC.
Previously (up to version 8) I set location directly, editing the "Table" field in "Set Location" form. Command after report creation was:
Proc(DBNAME.dbo.PROCEDURE_NAME;1)
I erased "DBNAME.dbo.", so the correct command was
Proc(PROCEDURE_NAME;1)
After that, the report can run on any database name, any ODBC datasource with any owner name of procedure.
Now we had to upgdate to CR 11 Developer Edition.
Here I can't erase database location. But when I change database location to ODBC datasource for another database, the properties of stored procedure "Catalog" and "Owner" remain the same as they initiated when report was created! So, when report runs, it call
exec OLD_DB_NAME.dbo.PROCEURE_NAME;1 ....
So, the report doesn't work on customer database, because it has different name.
How can I erase any database location in the report?We run reports using API from Gupta Team Developer applications, may be it is possible to set database location by API before running report?
Plese help, any tips are usefull.

Post Author: Pavel
CA Forum: Data Connectivity and SQL
When I set location to another database (i.e. another ODBC datasource) by clicking Update button, "Catalog" property is not changing! It remains unaltered. I had to remove procedure from report and then add procedure from another database, so there was a lot of formatting fileds after that.
This is not a right decision. I didn't solved current problem, I only temporary patched it.
The correct desision is to set location programmatically from application.But function PEGetNthTableLocation returns empty strings in CR11, or I incorectly declared this function (from CR8.5):
BOOL CRPE_API PEGetNthTableLocation ( short printJob, //handle to print job short tableN, //number of table struct PETableLocation FAR *location //structure pointer);typedef struct PETableLocation { WORD StructSize; char Location [PE_TABLE_LOCATION_LEN]; //256 char SubLocation[PE_TABLE_LOCATION_LEN]; //256 char ConnectBuffer[PE_CONNECTION_BUFFER_LEN]; //512} PETableLocation;

How to set a location of a JFrame using mouseListener?

Hi,
I was wondering how i could set the location of a JFrame using the mouseListener? I know when i want to show a JPopMenu i can do:
pop.setLocation(e.getX(), e.getY());
pop.setInvoker(null);
By using .setInvoker(); I can show the jpopup on the position that i clicked my mouse but this method is not available to the JFrame.
Should i do this with the Dimension screenSize = Toolkit.getDefaultToolkit().getScreenSize(); instead? I was wondering if there is an easier way to do this. If not i can code a workaround but thats not my first choice.
Thanks

CaptainMorgan08 wrote:
deAppel wrote:
CaptainMorgan08 wrote:
Why do you need setInvoker() for a JFrame? What's wrong with just setLocation()?The problem is that i want to show my frame where i clicked my mouse but when i get the x,y from the mouselistener getX/Ymethods the frame doesn't show up on the location where i clicked with the mouse, instead it shows the frame in the location x,y NOT relative to the mouse.I see. Well if you're using Java 6, you can use the getXOnScreen() and the getYOnScreen() methods from MouseEvent.
http://java.sun.com/javase/6/docs/api/java/awt/event/MouseEvent.html#getXOnScreen()
Otherwise you'll need to add the x and y coordinates of whatever component you're clicking on.I'm using Java 6, I tried your suggestion but i get the same value with getX/Y and getX/YOnScreen()

How to set "From Location" in OMBPLUS

Hi,
additional question:
After import of a non_oracle location with database link the field "from Location" is not set. I need to set it to OWB_REPOSITORY_LOCATION.
How can i do in in OMBPLUS?
Regards
Helga

Hi Helga
See the code referenced here;
Re: OMBCREATE LOCATION from dblink - Available properties?
In the UI when you create a location X of type database link, from location Y using dblink Z, then a connector from Y is created to X behind the scenes. So from scripting you have to create this....
OMBCREATE LOCATION 'X' SET PROPERTIES (TYPE,VERSION,CONNECTION_TYPE) VALUES ('ORACLE_DATABASE','11.2','DATABASE_LINK')
OMBCREATE LOCATION 'Y' SET PROPERTIES (TYPE,VERSION) VALUES ('ORACLE_DATABASE','11.2')
OMBCREATE CONNECTOR 'Y/X' SET PROPERTIES (DATABASE_LINK_NAME) VALUES ('LINKNAMEHERE') SET REF LOCATION 'X'
Cheers
David

How to update storage location & batch split on delivery items?

Any idea how to perform the following using a BAPI or function call with regards to updating a Delivery (VL02/VL02N)?
1) Enter or update a storage location on a delivery item?
2) Batch split a delivery item to give multiple batch numbers. For example if delivery item is '101' then after batch split additional delivery items with batch number assigned will appear as '900001', '900002', '900003', etc Entering a single batch number is straight forward and can be done using WS_DELIVERY_UPDATE/_2
Do not wish to use BDC or call transaction. Any help appreciated.

hi sailatha..
im doing BDC for VL01N transaction.. how can i pass multiple storage locations for picking quantity.. my requirement is if the material is not there in the specified storage location it should search in the other storage locations for delivery.
how can i solve this issue bcoz in the VL01N screen i can pass only one storage location.
this is urgent requirement..
kindly revert me back if u can help.
thankx
helpful answer will be rewarded.

How to add storage location in the MBBS transaction out put

Hi experts,
I need to add the storage location in the MBBS Transaction report
out put . what will be the procedure. Is there any standard settings or else I have to copy the program. Plz help me.
Thanks&Regards,
Srinivasa rao.V

I've been able to store the contents of my camcorder on the Mac's HD. I've tried importing the clips from there and get the same result, whether I try to import one or several clips at once, it replies with the same error message as to the missing storage location/instructions. Interestingly, it will nonetheless import the first (or only) one of the clips that I highlight on the import screen.
When you suggest dragging the files, from where do you mean? The clips per se don't appear in the finder, but only on the import page. The finder show only various fragmented files that aren't complete clips (eg. separate video and index, even sound files), which is too much of a pain to deal with...
It's true that my original iMovie library was created from an upgrade, but I have since deleted the contents and attempted to reload the clips. Are you suggesting deleting the library completely and starting again, or should I just try creating another event and using that? Don't see why that shoudl work better than "updated projects", but perhaps it's worth a try...
Thanks again

How to set storage location in iMovie 10?

Similar Messages

Maybe you are looking for