How To Set Synchronous Call in FM CRM_SEND_DATA

Hi all,
Please help me, how to set i_synchronous_call in FM CRM_SEND_DATA?
Thank you

Hi
perhaps this link could help...
https://kr.forums.oracle.com/forums/thread.jspa?threadID=2182172
Re: migrating forms to 11g - problems with absolete built-ins
Amatu Allah

Similar Messages

How to set the caller tune on PRI-Line/CUCM 8.X

Hi Team,
If passible to set the caller tune songs or advertising in CUCM 8.x -( in place of ringing).
How to set the caller tune for incoming calls( advertising), including 4 digit extension. This feature is available or not (cucm 8.0.3) Kindly verify and confirm
regards,
Johnson

Dear Team,
Now i have configured the Call Queuing, Its working fine, But how to verify to incoming calls or Missed call are in queuing, how to showing.
Connected call are showing, but unable show missed call like who ever in queue.
Regards,
Johnson.

How to set Synchronous message deletion retention period in AE

Hi,
Please advise how to configure rentention period message deletion in AE for synchronous transaction. Because currently the syn message always deleted within 24 hours. and xiadapter.outbound.persistDuration.default = 2592000000 [ms] parameters is only for asynchronous.
so i can see yesterday transaction in message monitoring for Best Effore.
FYI : the current configuration is to turn on Synchronous log in integration Engine.
Thank You and Best Regards
Fernand

SAP help explains it: http://help.sap.com/saphelp_nwpi71/helpdata/en/2f/88084136b5f423e10000000a155106/frameset.htm and http://help.sap.com/saphelp_nwpi71/helpdata/en/05/b1b740f83db533e10000000a155106/frameset.htm

Parallel synchronous calls from BPM

Hi,
how many parallel synchronous calls can XI perform at once?
Reason why I ask, for me it looks like parallel calls are handled sequentially in XI.
My scenario: I have a ccBPM that should ask three different synchronous WebServices to collect data. In the BPM I used the Branch element where one synch call is in every branch.
Unfortunately at runtime the monitoring says that the WebServices are asked consecutive and not parallel.
Even if I start a performance test an run 10 BPMs at the same time, all WebServices are asked consecutive.
So is there a unknown hidden parameter to force parallel sync calls or is XI not able to perform such calls?
Regards,
Robert
(tested on 7.0 and 7.1)

Hi,
Maximum Number of receivers you couls send at a time are 999. So i think u can make 999 webservice parallel calls at a time.
Using BPM:
First have a receive step and then the receiver determination and the out put of this step would be a multi line element(containing all the receivers identified during the runtime).And then create a block step in par for each mode and in the properties give the multielement name created from the receiver determination step and then a send step in the block in synchronous mode.
In ID confgure all the receivers.
Thanks,
Vijaya.
Edited by: Vijaya Lakshmi Palla on Jun 2, 2008 6:29 AM

How to set the root path of XML document when calling Inserting procedure

Hi,
I was create a procedure to insert XML Document in to DBMS Tables, but i am not able to set the Start root element in calling procedure.
My calling procedure is
exec insXmldoc('pmc_sample.xml', 'pmc')
When i am calling this procedure i got this error
11:23:54 Error: ORA-29532: Java call terminated by uncaught Java exception: oracle.xml.sql.OracleXMLSQLException: Start of root element expected.
ORA-06512: at "SYS.DBMS_XMLSAVE", line 65
ORA-06512: at "SCOTT.INSPROC", line 8
ORA-06512: at line 2
I am checking my XML file using XML Validator. My XML file was parsed with out errors.
Please give the solution,and tell me where i did wrong in my calling procedure.
suppose i have this XML file in local E drive ,how to set the path for that XML file in my calling procedure.

Hi, I am doing the code likthis,please give the solution.
SQL> create or replace procedure insProc(xmlDoc IN CLOB, tableName IN VARCHAR2) is
2 insCtx DBMS_XMLSave.ctxType;
3 l_ctx dbms_xmlsave.ctxtype;
4 rows number;
5 begin
6 insCtx := DBMS_XMLSave.newContext(tableName); -- get the context handle
7 rows := DBMS_XMLSave.insertXML(insCtx,xmlDoc); -- this inserts the document
8 DBMS_XMLSave.closeContext(insCtx); -- this closes the handle
9 end;
10 /
Procedure created.
SQL> begin
2 insProc('/usr/tmp/ROWSET.xml', 'emp');
3 end;
4 /
begin
ERROR at line 1:
ORA-29532: Java call terminated by uncaught Java exception: oracle.xml.sql.OracleXMLSQLException:
Start of root element expected.
ORA-06512: at "SYS.DBMS_XMLSAVE", line 65
ORA-06512: at "SCOTT.INSPROC", line 7
ORA-06512: at line 2
Kishore B

How to set a cookie in the browser from an html page called via an Iview

How to set a cookie in the browser from an html page called via an Iview
Hello all,
I have an issue which is causing problems. I have a snap survey (html form with submit and cookie setting) which is embedded in a url iview.
Although the submit and the form work fine, the portal will not allow the cookie to be set it seems.
Is there a way to allow cookies to be set from an embedded page in a url iview??
You will make my day if you know!
System: EP7 SP13
Kind regards
Alex

Hi,
Check this:
http://www.oracle.com/technology/products/ias/portal/html/same_cookie_domain_with_pdkv2.html
Cookie Basics
Web browsers have built in rules for receiving and sending cookies. When a browser makes a request to a web server and the web server returns cookies with the response, the browser will only accept a cookie if the domain associated with the cookie matches that of the original request. Similarly, when a browser makes a subsequent request, it will only send those cookies whose domain matches that of the target web server.
These rules are designed to ensure that information encoded in cookies is only "seen" by the web server(s) that the originator of the cookie intended. These rules also ensure that the cookie cannot be corrupted or imitated by another server. By default, the domain associated with a cookie exactly matches that of the server that created it. However, it is possible to modify the domain at the time the cookie is created. Relaxing the cookie domain increases the scope of the cookie's visibility making it available to a wider "audience" of web servers.
For example, if a cookie is created by a.us.oracle.com, it's domain will usually be set to a.us.oracle.com. This means that the browser will only send the cookie to a.us.oracle.com. It will never send it to any other servers. However, if at the time of creation, the domain of the cookie is set to .us.oracle.com, the browser will send the cookie to any server whose domain falls within .us.oracle.com. such as portal.us.oracle.com, provider.us.oracle.com, app.us.oracle.com etc
Regards,
Praveen Gudapati

How to set images to your contacts to see their picture when there calling? Like their facebook picture.

How to set images to your contacts to see thier picture when someone is calling? Like for instance facebook picture.(on the iPHONE 4s)

You can manually add a photo to each contact on your iPhone - from an existing photo of the contact on your iPhone or capture a photo of the contact when together. Or add a photo for each contact in the address book app on your computer that is supported for syncing contacts with the iPhone followed by a sync.
For FaceBook check this link, which I found with a Google search.
http://www.iphonestuffs4u.com/how-to-sync-facebook-contacts-to-iphone/

HT5661 how to set pic display while calling to contact ?

how to set pic display on calling to contact person ?

Hello HaD,
The image control is installed with either the Vision Development Module or the NI-IMAQ driver, and is not a standard component found in LabVIEW. If you have questions about the image display control or vision functions it would be better to post in the Machine Vision forum:
http://forums.ni.com/ni/board?board.id=200
In regards to your question, this menu is not available as a runtime property, and therefore the user of program will not be able to set it directly through the control. Instead, you will need to allow the user to set it programmatically in LabVIEW by use of a property node.
To create this property node, right-click on the image display icon on your program's block diagram, and select:
Create » Property Node » Palette » Palette Type.
You will then be able to change the value of this property by right-clicking on the property node icon and selecting "Change All To Write". To create a control on the front panel that the user change at runtime, right-click on the “Palette Type” input, select:
Create » Control
If you have any questions about the application architecture required to implement this design, please continue to post in the LabVIEW forum.
I hope this helps.
Best regards,
Jasper

How to set up video call to be able to choose NOT to show or to show my face?

Hello,I have just upgraded to new version of Skype.I would like to set up the video calling for my privacy. I have read the instruction;All saying to go to"tool"but I cannot find "tool" in new version of skype,Please advise how to set up video calling,I just want to talk like a phone, without exposeing my privacy to everybody. Please advise.Nekomilk

Most likely you are using the "modern" (metro) Skype app. You will have all the customization options available if you install Skype desktop version. https://support.skype.com/en/faq/FA12189/what-s-the-difference-between-skype-for-modern-windows-and-skype-for-windows-desktop In any case, the metro app will be disable after July 7 this year. http://blogs.skype.com/2015/06/11/a-more-efficient-skype-experience-for-your-pc/

How to set up video call to be able to choose NOT ...

Hello,
I have just upgraded to new version of Skype.
I would like to set up the video calling for my privacy.
I have read the instruction;
All saying to go to
"tool"
but I cannot find "tool" in new version of skype,
Please advise how to set up video calling,
I just want to talk like a phone,
without exposeing my privacy to everybody.
Please advise.
Nekomilk

Most likely you are using the "modern" (metro) Skype app. You will have all the customization options available if you install Skype desktop version.
https://support.skype.com/en/faq/FA12189/what-s-the-difference-between-skype-for-modern-windows-and-...
In any case, the metro app will be disable after July 7 this year.
http://blogs.skype.com/2015/06/11/a-more-efficient-skype-experience-for-your-pc/

I don't know how to set up closingFirefox to have all open tabs next time when I open it, without calling RESTORE PREVIOUS SESSION

Question
I don't know how to set up closingFirefox to have all open tabs next time when I open it, without calling RESTORE PREVIOUS SESSION

Tools > Options > General
:At the top '''When Firefox starts:''' Show my windows and tabs from last time
You can still bring up your home page later.

How to use "Set Enterprise Call Info" step in the script ?

Hi all
Can anyone please suggest how to use "Set Enterprise Call Info" step in the script.
Does anyone has any example script with the same (a complete example script) ?

Hi
go to this guide
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/crs/express_7_0/user/guide/uccx70edgs.pdf
and see the chapter
"Designing Scripts for use with the Cisco Application Gateway"

How to set input delay and output delay when source Synchronous

ClkIN is the board clock which is connected to the FPGA. Clkif is the generated clock from ClkIN. The Device's clk come from Clkif. So, how to set input delay and output delay in this scene(within my understand, this is Source Synchronous)?
The example in many document, the input delay and output delay setting all refer to board clock(within my understand, this is System Synchronous). In that scene, the input delay max = TDelay_max + Tco_max; input delay min = Tdelay_min + Tco_min; the output delay max = Tdelay_max + Tsu; output delay min = Tdelay_min - Th.
So, I want to know how to set input/output delay in the Source Synchronous.
In system synchronous, I set input/output delay such as:
create_clock -period 20.000 -name ClkIN -waveform {0.000 10.000} [get_ports ClkIN]
create_generated_clock -name Clkif -source [get_pins cfg_if/clk_tmp_reg/C] -divide_by 2 [get_pins cfg_if/clk_tmp_reg/Q]
create_clock -period 40.000 -name VIRTUAL_clkif //make virtual clock
set_input_delay -clock [get_clocks VIRTUAL_clkif] -min 0.530 [get_ports DIN]
set_input_delay -clock [get_clocks VIRTUAL_clkif] -max 7.700 [get_ports DIN]
set_output_delay -clock [get_clocks VIRTUAL_clkif] -min -0.030 [get_ports DOUT]
set_output_delay -clock [get_clocks VIRTUAL_clkif] -max 1.800 [get_ports DOUT]
*******************************************************************************************

So, first. Architecturally, the clock that you forward to your external device should not come directly from the clock tree, but should be output via an ODDR with its D1 input tied to logic 1 and the D2 tied to logic 0. This guarantees minimal skew between the output data and the forwarded clock.
ODDR #(
.DDR_CLK_EDGE("OPPOSITE_EDGE"), // "OPPOSITE_EDGE" or "SAME_EDGE"
.INIT(1'b0), // Initial value of Q: 1'b0 or 1'b1
.SRTYPE("SYNC") // Set/Reset type: "SYNC" or "ASYNC"
) ODDR_inst (
.Q (Clkif_ff), // 1-bit DDR output
.C (ClkIN_BUFG), // 1-bit clock input
.CE (1'b1), // 1-bit clock enable input
.D1 (1'b1), // 1-bit data input (positive edge)
.D2 (1'b0), // 1-bit data input (negative edge)
.R (rst), // 1-bit reset
.S (1'b0) // 1-bit set
OBUF OBUF_inst (.I (Clkif_ff), .O (Clkif_out));
This generates an output clock that is the same frequency as your input clock. This is consistent with your drawing, but inconsistent with your constraints - is the forwarded clock a 50MHz clock or a 25MHz clock?
I will assume your ClkIN goes to a BUFG and generates ClkIN_BUFG. Your first constraint generates a 50MHz clock on the ClkIN port which will propagate through the BUFG to (among other places) this ODDR.
create_clock -period 20.000 -name ClkIN -waveform {0.000 10.000} [get_ports ClkIN]
Assuming your forwarded clock is supposed to be 50MHz, then your 2nd command is close to correct
create_generated_clock -name Clkif -source [get_pins cfg_if/ODDR_inst/C] -combinational [get_pins cfg_if/ODDR_inst/Q]
With this done, you have successfully described the forwarded clock from your design. This is the clock that goes to your device, and hence should be the clock which is used to specify your input and output constraints.
set_input_delay -clock [get_clocks Clkif] -min 0.530 [get_ports DIN]
set_input_delay -clock [get_clocks Clkif] -max 7.700 [get_ports DIN]
set_output_delay -clock [get_clocks Clkif] -min -0.030 [get_ports DOUT]
set_output_delay -clock [get_clocks Clkif] -max 1.800 [get_ports DOUT]
If you want to get fancier, you could try adding a set_clock_latency to the forwarded clock to account for the board propagation of the clock
set_clock_latency -source TDtrace2 [get_clocks Clkif]
(But I haven't experimented with clock latency on a generated clock and I don't know for a fact that it works).
Avrum

How do you set up call forwarding?

i am using 2 phone numbers and would like the calls for both numbers to go to which ever phone can be reached. how do i set up call forwarding?

I take it you have two phones, each with a different provider?
How do I activate Call Forwarding?
To activate Call Forwarding:
Press *72.
Enter the phone number where you want calls to be forwarded. (e.g. *72-908-123-4567).
Press SEND and wait for confirmation. You should hear a confirmation tone or a message.
Press END.
How do I deactivate Call Forwarding?
To deactivate Call Forwarding:
Press *73.
Press SEND and wait for confirmation. You should hear a confirmation tone or a message.
Press END.

Form call report,but form hang when report sun slowly,how to set server?

In version 10.1.2
Form call report, form hang when report sun slowly,
finally the report will done,I can see the output in the server disk,but form hang,
I think it's out of the report session, ,how to set server?
thanks for any help!
lind

Hello,
If you are using the "Paper Layout", check the Reports's "Before Report Value" property:
Before Report Value :
<meta http-equiv="Content-Type" content="text/html; charset=&Encoding">
If you are using the "Web Layout", take a look to the document :
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_nls.htm#i1006142
18.3 Specifying a Character Set in a JSP or XML File
Regards

How To Set Synchronous Call in FM CRM_SEND_DATA

Similar Messages

Maybe you are looking for