How to set Synchronous message deletion retention period in AE

Hi,
Please advise how to configure rentention period message deletion in AE for synchronous transaction. Because currently the syn message always deleted within 24 hours. and xiadapter.outbound.persistDuration.default = 2592000000 [ms] parameters is only for asynchronous.
so i can see yesterday transaction in message monitoring for Best Effore.
FYI : the current configuration is to turn on Synchronous log in integration Engine.
Thank You and Best Regards
Fernand

SAP help explains it: http://help.sap.com/saphelp_nwpi71/helpdata/en/2f/88084136b5f423e10000000a155106/frameset.htm and http://help.sap.com/saphelp_nwpi71/helpdata/en/05/b1b740f83db533e10000000a155106/frameset.htm

Similar Messages

How to set the message deletion function

What must I do to allow my verizon.net messages to remain in my inbox for a few months? I don't see anything in "settings" that allows me to manage this...Thanks!

nellpals wrote:
I don't know where the old messages are going! Right now they only go have messages dating back as far as Nov. 21--which is only a few weeks' worth.
My husband set up my Microsoft Outlook 2010 for me about 6 mos ago, so I mostly view my emails through Microsoft Outlook. But I should still have access to them through my Verizon account when I'm not at home. And when I read the response below to another person whose messages had also vanished, I wondered if this could be related to my problem?? (sorry to be stupid about this.., )
"Most likely an e-mail client downloaded them."
Microsoft Outlook is an email client, and is most likely the cause of the deletions. Check your settings in Outlook to make sure "Leave a copy of messages on server" is checked.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

TS2755 Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help of how to set up messages on each

Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help on how to set up messages on each device separately and to start using messages app on each device independently. Thanks

search google for "iphone remove picture from contact"

How to set the message in the status bar...

hai,
how to set the message in the status bar...
let us say "inserted data successfully, or opening page followed by the link clicked on the screen....."
kindly help me out

sunil,
do not use advise by Ashutosh with WebDynpro.
Instead of placing message into browser status bar (and browser is not the only WD UI agent), use IWDMessageManager API to post messages of such kind:
wdComponentAPI.getMessageManager().reportSucces("Record inserted");
VS

How to set MQ message header properties using JMS adapter? (10.1.2)

Hello,
I am trying to send MQ messages from a BPEL process. We are using OAS 10.1.2 and JMS MQ adapter. Could you please let me know how to set the message descriptors like message format, type, report and reply to queue properties and queue open options (in jmsAdapterOutboundHeader).
Regards,
Geratayya

put something like this
<activationAgents>
      <activationAgent className="oracle.tip.adapter.fw.agent.jca.JCAActivationAgent" partnerLink="PARNERLINKNAME">
        <property name="clusterGroupId">SOMEUNIQUEVALUE</property>
        <property name="portType">PARTNERLINK_PORTTYPE</property>
      </activationAgent>
    </activationAgents>

How to set up open&close posting period to process year-end at April

Hi FICO GURUs,
I m a new student in FICO, here i have a question as following, ask for help,
For the open period. If we need to clearing till April, how do we do for that? How to set up in open and close posting period?
Any responses will be awarded.
Thanks a lot!
Samson

In OB52 you need to manage open periods related to FI. Any periods which are not managed here implies those periods are closed
Ex: From Period Year To Period Year
04 2008 04 20008
This means 4th Period of 2008 is open and all other periods are closed.
Also you can open and close period seperately for General Ledger and Subledgers
Types A,D,K,M are subledgers and S type is for ledger.
There will be seperate open and close periods for FI,MM and CO modules
FI- OB52
CO-OKP1
MM- MMPV
Assign Points if useful
Regards
Raghu Ram

How to set error message inside the loop...module pool

Dear all,
     Am creating Table Control without wizard. In that i am looping the values, that is, Once if i entered 5 digit values means, 12345-08... the values should be stored in z-table like this 12345,12346,12347,12348 . That is 5-8 it as to update in z table. for this i createdloop at itab and inside that i written a code to count the value and all. and also its clearly updating the value in ztable too. now i want to know, if once again i entered the same value means, like 12345-08.. it as to show error messge.I dont know how to set the condition with error message inside the single loop .... Its all comes under module pool program.
Thanks,
Santhosh.R

If i understood your doubt, here goes the answer.
LOOP AT itab INTO wa_itab. " This is your loop
l_tabix = sy-tabix. "l_tabix receives the line of the loop
READ TABLE itab WITH KEY itab = wa_itab. "itab is the same tab of your loop
IF sy-subrc EQ 0 AND l_tabix NE sy-tabix.    "Here the sy tabix have the value of the read table.
*     Here you do your error treatment.
ENDIF.
ENDLOOP.
Explanation: When you are looping your internal table, you use a READ TABLE to see the already recorded registers. If the read table finds one register (sy-subrc EQ 0) and the this register is not the one of the current line (l_tabix NE sy-tabix). It means you have a duplicated register.
Maybe there is someway easier to do this, but this is what i thought now.
I hope this was your doubt hehe.
Thales Schmidt

How To Set JMS Message ID

Hi,
I am working for a client that uses a MQ Series as their interface routing infrastructure. They have written some custom tools that log MQ messages. Their tools expect the MQ message ID to be in a specific format YYYY_MM_DD_HHMMSS_AAAAAA where AAAAAA is a unique set of characters based on the millisecond.
Is it possible to set the JMS message ID on a JMS receiver adapter?
Thanks in advance for your help,
Craig

Hi Craig,
as it looks you have to set the Message Id in a special format. I am not sure if this is possible at all. I didn't find a way to influence how XI sets the JMS Message Id.
Maybe you could work with the JMS Correlation ID instead and have your client adapt his tools. You can use either a User-Defined Function or a Java Mapping, setting the so-called Adapter-specific attribute DCJMSCorreleationId
Here you can find an example how to do this in the User-Defined Function:
http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm
In a Java Mapping it is similar:
http://help.sap.com/saphelp_nw04/helpdata/en/43/09b16006526e72e10000000a422035/frameset.htm
This example uses the File Adapter, but the same applies for the JMS Adapter.
The JMS Adapter has the namespace http://sap.com/xi/XI/System/JMS
Have a look at this one to find out more about the Adapter-specific attributes of the Receiver JMS Adapter:
http://help.sap.com/saphelp_nw04/helpdata/en/10/b1b4c8575a6e47954ad63438d303e4/frameset.htm
I hope that this information is of some help for you.
regards,
Peter

How to set as default current year & period in variant

Hi SAP Guru,
Can anyone help me on how to set as default the current year and period in variant. I want to do a background job for our program using save variants. But I need the period and year to always be assigned what ever is the current year and period.
Hope someone can help.
Thanks
Daboi

- Create variables for variants: use transaction STVARV. You should create one variable for fiscal year with type 'parameter', one for period with type 'parameter', one for fiscal year 'select option' and one for period 'select option'.
- when saving your variants for the different programs, fill the checkbox 'Selection variables' in the attributes for fiscal year and period; use the button 'selection variables' for choosing the variables created in STVARV.
- When closing the period, you should use STVARV for changing the variables. All the variant using the variant variables will then automaticaly use the new value.

MB21Reservation - How to set Error Message?

Dear Experts,
For a material say 123456, in the material master Purchasingset OB (Obsolete identified Blocked).
1. Then when i do reservation through plant manitenance order, the system issue us the error message(its correct)
2.But when we do MB21-create reservation using 201 movement type, the system allows to create reservation for Material 123456, but it should not allow - it has to issue Error Message
so how to set in SPRO to issue Error message for this scenario and how to stop creating the reservation for OB set Material in MMR.
Its urgent, please help me to solve this
Regards
Saravanan S
Edited by: Subramania Saravanan on Jul 20, 2008 9:10 AM
Edited by: Subramania Saravanan on Jul 20, 2008 9:55 AM

Hi Friends.
The solution is...go to SPRO-Logistic general-Material Master-setting for keyfields- Define Material Statusthen double click on OB(Obsolete Block Indicator), then you can see for various process..then assign B(error message) for Inventory management.
After settings is done, try to do set OB in purchasing view in MMR for a material, and try to do reservation for the material..system states the Error Message.
Thanks
Saravanan
Edited by: Subramania Saravanan on Jul 20, 2008 1:09 PM

How To Set Synchronous Call in FM CRM_SEND_DATA

Hi all,
Please help me, how to set i_synchronous_call in FM CRM_SEND_DATA?
Thank you

Hi
perhaps this link could help...
https://kr.forums.oracle.com/forums/thread.jspa?threadID=2182172
Re: migrating forms to 11g - problems with absolete built-ins
Amatu Allah

How to set error message for 541 Movement type

Dear gurus,
            I want to know that is it possible to set error message through any configuration? My requirement is that when we create issue document using m.t 541 it will not allow me to process that document without releasing PO document.so for that i want to set error message.
<removed by moderator>
Message was edited by: Jürgen L

Hi,
   The subcontracting goods issue can be done even without PO reference. If your organization is strictly following the goods issue against PO only and you want to restrict the goods issue if the PO is not released, then you may check the below option. Please note that the below option is available in standard only from EHP 4 or above.
1. Refer the KBA: 1915825 - Transfer Posting reference to a Purchase Order in MIGO and activate the PO reference option in MIGO - Transfer posting.
2. Restrict the use of 541 movement in MB1B - Go to OMJJ and enter movement type as 541. Now go to "allowed transactions" folder and remove MB1B. Now the user cant use 541 in MB1B.
3. Maintain the field - Purchase order as mandatory field for the movement type 541 in OMJJ.
4. Train the users to use MIGO - Transfer Posting - Purchase order option for goods issue with 541 movement.
5. If the PO is not released, system wont allow to use the PO in MIGO - Transfer Postings.
6. If the user is selecting Transfer Posting - Other, system wont check the PO and hence it will allow to post the goods issue even if PO is not released. You may take organizational measures to restrict the usage or you may check for authorization concept - Refer the note: 773003 - MIGO: No authorization object for action/reference document
   If you are below EHP 4, there is no standard functionality available for the requirement as of my knowledge. If so, you may go for development to restrict the same.
Regards,
AKPT

How to set resources message to html:text?

I'using struct in Jdeveloper 10.1.2.3.0 and I would like to set the bean message to the value of html:text, but not success.
<html:text value="<bean:message key="xxx.xxx"/>"/>
How can I do that?

There appears to be some misunderstanding here.
I just tested Mark's instructions and I got what it sounds like you're asking for.
Be sure you are setting the "HTML Form Element Attributes" under "Element". Do NOT set the "HTML Table Cell Attributes" under "Label".
Hope this helps,
Gregory
Edited by: Canis Polaris on Sep 16, 2009 8:02 AM
P.S. I got a nice light blue using CCFFFF.

How to set OSA appraisal template validity period ??

Hi Guru,
I am now working on OSA appraisal. When i create a appraisal template in PHAP_CATALOG, i cant specify the validity period. In the end, the validity period always sets to start date as 01/01/1900 and end date as 31/12/9999. As a result, i cant specify that in which year, which appraisal template to be used because all the templates are having the same validity period. For example, i wanna create a appraisal template from 01/01/2008 to 31/12/2010. So,how can i set the validity period to the period i want? Or is there anywhere can set the validity period ?
Thanks

In the VA object, Layout tab, make sure "do not display validity period" is not checked. This should display the validity period columns, which the user's can enter.
If the column cannot be changed, then check the security authorization.
If the values are defaulted, make sure, you disable the BAdi. Also, make sure, in the processing tab,
click on the "further template behaviour" button. Make sure, there are no "default validity period" enhancement area's.

How to set the message in the textInput

Hi,
I have a textInput field as follows on my UIX form:
<uix:textInput name="UserName">
Beneath/Under the textInput element, I would like to display a short message (something like, UserName should include alphabetic and numeric characters). How to achieve this?
Thanks,
Guru

Guru,
you should first tell us which jdev version you a on...
UIX sounds like 9.x
I guess there is a uix:outputText or uix:text element available you can use to put some text on your page.
Timo

How to set Synchronous message deletion retention period in AE

Similar Messages

Maybe you are looking for