How to set the AppleTV to output PCM DIGITAL via toslink
how do you set the AppleTV to output PCM DIGITAL via toslink - my amp can only recieve PCM audio via toslink cable
I am having the same problem. I bought an optical-analog convertor from Amazon (SANOXY) and had Onkyo try to help me set it up. No luck. I am going to try a Monoprice version. I was able to output audio through my DirectTV box to the Zone 2 speakers, so that isn't the problem. I was able to hear the music from my iMac through the AppleTV/Onkyo receiver on the 5.1 side but was unable to output it through Zone 2 to the speakers.
Very frustrating!!!!
Similar Messages
-
How to set the input and output of a subVI
I am trying to configure a subVI by following Chap. 7 of "LabVIEW fundamentals". But I stuck at "Building the connector pane".
My subvi is quite simple, just for testing purpose. I plan to do a summation and display the result. So I placed one numeric Add icon on the block diagram and a numeric Indicator on the front panel. I built a connector pane with three terminals, two for input and one for output.
But, how could I associate the terminals on connector pane with inputs and outputs of terminals on the block diagram? I wanna build a subVI, whose input are two numbers and display the summation on the subVI.
Forrest Sheng Bao, Ph.D.
Assistant Professor, Dept. of Electrical & Computer Engineering
University of Akron, Akron, OH, USA
https://sites.google.com/site/forrestbao/Hi Forrest Bao,
use the right mouse key as often as you can in LabVIEW. It´s very helpful. If you right click on a link in the connector pane, then you can select to disconnect selected or all.
Mike
Message Edited by MikeS81 on 08-28-2008 01:33 PM -
Sun ONE Studio 4 aka Forte: How to set the output path for classes ?
Help !
Beginner's question:
Sun ONE Studio 4 aka Forte:
How to set the output path for classes ?
As default, the class files are created in the same directory as the
sources.
In opposite, both JBuilder and Together support that there is a tree
with the sources and another tree with the classes.
The first answer I got was "not possible with Forte, but just if you write your own "ANT Build script" !
a) Please point me to a ready-to-use ANT script for this purpose, if such is available
b) Is using ANT instead of the MAKE as comfortable ? Besides the separation of sourcecode and classes, I would like to keep everything else to be the same, i.e. I don�t want to edit the ANT file if I enlarge the project by directories or files.
Tia
Sincerely
RolfYou can set S1S's options to place newly created .class files in a specific location.
Identify the compiler that is being used - Open the S1S's Tools/Options window, expand Editing and select Java Sources. Note the Default Compiler value. (If it's one if the Ant options, you use Ant to specify this option, not S1S.)
Open the S1S's Tools/Options window, expand Building/Compiler Types and select the appropriate compiler.
The Properties tab of the compiler has the property Target, which sets the filesystem where the compiler output is directed. If you choose <not set>, the .class files are written to their source directory.
When you set the Target, your change affects all classes that use this compiler.
Very few options can't be set in S1S; the challenge is finding out where they're set! -
How to set the table input in Query template?
Hi all.
I need to call a Bapi_objcl_change, with import parameter and a table as an input. I have done this, in BLS. I have set the table input in the
form of xml. In BLS, I get the output(the value gets change in SAP R3, what i have given in BLS). But if i set the same xml structure in
query template, I didn't get the output. Table input parameter does not take that xml source. How to set the table input in Query template?
can anyone help me?
Regards,
HemalathaHema,
You probably need to XML encode the data so that it will pass properly and then xmldecode() it to set the BAPI input value.
Sam -
hi i am creating xml publisher and from OAF with parameters
cusname:
runreportdate:
go clear buttons
click go open report in pdf
SELECT hp.party_name CustomerName,
csi.incident_number SRNumber,
to_char(csi.incident_date,'DD-MON-YYYY') SRDate,
to_char(csi.close_date,'DD-MON-YYYY') SRCloseDate,
mtl.description SRItemName,
csi.summary Summary,
csi.problem_code,
csi.incident_address SRAddress,
csi.INCIDENT_COUNTRY SRCountry,
'31-DEC-2008' Reportrundate,
COUNT ( * ) over () cnt,
cis.name,
COUNT(
CASE
WHEN cis.name='Low'
THEN 1
END) over () Low,
COUNT(
CASE
WHEN cis.name='Medium'
THEN 1
END) over () Medium,
COUNT(
CASE
WHEN cis.name='High'
THEN 1
END) over () High1,
to_char(csi.incident_date,'MON-YYYY') SrMonth
FROM hz_parties hp,
hz_cust_accounts hca,
hz_contact_points hc,
cs_incidents_all_b csi,
ar_lookups arl,
cs_incident_severities_b cis,
mtl_system_items_kfv mtl
WHERE hca.cust_account_id =csi.account_id
AND hp.party_type IN ('PERSON','ORGANIZATION')
AND hp.status ='A'
AND hp.party_id = hca.party_id
AND hca.status ='A'
AND hp.party_id =hc.owner_table_id(+)
AND hc.owner_table_name(+) ='HZ_PARTIES'
AND hp.party_id =hca.cust_account_id
AND hc.contact_point_type(+)='PHONE'
AND hc.primary_flag(+) ='Y'
AND hc.status(+) ='A'
AND arl.lookup_type(+) = 'PHONE_LINE_TYPE'
AND arl.lookup_code(+) = hc.phone_line_type
AND hp.party_name='Business World'
AND csi.incident_date BETWEEN to_date('01-JAN-2000','DD-MON-YYYY') AND to_date('31-DEC-2008','DD-MON-YYYY')
AND cis.incident_severity_id=csi.incident_severity_id
AND mtl.inventory_item_id=csi.inventory_item_id
GROUP BY hp.party_name,
csi.incident_number,
csi.incident_date,
csi.close_date,
csi.summary,
csi.problem_code,
csi.incident_address,
cis.name,
csi.INCIDENT_COUNTRY,
mtl.description,
to_char(csi.incident_date,'MON-YYYY')
Am code
public void initQuery(String paramString1, String paramString2)
SrReportVOImpl vo=getSrReportVO1();
if ((paramString1 != null) && (!("".equals(paramString1.trim()))) && (paramString2 != null) && (!("".equals(paramString2.trim()))))
vo.setWhereClauseParams(null);
vo.setWhereClauseParam(0, paramString1);
vo.setWhereClauseParam(1, paramString2);
vo.executeQuery();
public XMLNode getPrintDataXML()
//SrReportVOImpl vo=getSrReportVO1();
OAViewObject vo = (OAViewObject)findViewObject("SrReportVO1");
//vo.initQuery(s,s1);
XMLNode xmlNode=(XMLNode) vo.writeXML(4,XMLInterface.XML_OPT_ALL_ROWS);
return xmlNode;
CO code
SrAMImpl am=(SrAMImpl)pageContext.getApplicationModule(webBean);
if(pageContext.getParameter("Go")!=null)
//am.searchSrDetails(pageContext,webBean);
String s=pageContext.getParameter("CustomerName");
String s1=pageContext.getParameter("RunReportDate");
am.initQuery(s,s1);
// Get the HttpServletResponse object from the PageContext. The report output is written to HttpServletResponse.
DataObject sessionDictionary = (DataObject)pageContext.getNamedDataObject("_SessionParameters");
HttpServletResponse response = (HttpServletResponse)sessionDictionary.selectValue(null,"HttpServletResponse");
try {
ServletOutputStream os = response.getOutputStream();
// Set the Output Report File Name and Content Type
String contentDisposition ="attachment;filename=ServiceReport.pdf";
response.setHeader("Content-Disposition",contentDisposition);
response.setContentType("application/pdf");
Serializable param[]={pageContext.getParameter("CustomerName"),pageContext.getParameter("RunReportDate")};
System.out.println("hiiii 12");
// Get the Data XML Output as the XMLNode
XMLNode xmlNode = (XMLNode) am.invokeMethod("getPrintDataXML",param);
System.out.println("hiiii 13");
System.out.println(xmlNode.toString());
System.out.println("hiiii 14");
// Get the Data XML File as the XMLNode
ByteArrayOutputStream outputStream = new ByteArrayOutputStream();
xmlNode.print(outputStream);
ByteArrayInputStream inputStream = new ByteArrayInputStream(outputStream.toByteArray());
ByteArrayOutputStream pdfFile = new ByteArrayOutputStream();
//Generate the PDF Report.
TemplateHelper.processTemplate(
((OADBTransactionImpl)pageContext.getApplicationModule(webBean).getOADBTransaction()).getAppsContext(),
APP_NAME,
TEMPLATE_CODE,
((OADBTransactionImpl)pageContext.getApplicationModule(webBean).getOADBTransaction()).getUserLocale().getLanguage(),
((OADBTransactionImpl)pageContext.getApplicationModule(webBean).getOADBTransaction()).getUserLocale().getCountry(),
inputStream,
TemplateHelper.OUTPUT_TYPE_PDF,
null,
pdfFile);
// Write the PDF Report to the HttpServletResponse object and flush.
byte[] b = pdfFile.toByteArray();
response.setContentLength(b.length);
os.write(b, 0, b.length);
os.flush();
os.close();
pdfFile.flush();
pdfFile.close();
catch(Exception e)
response.setContentType("text/html");
throw new OAException(e.getMessage(), OAException.ERROR);
pageContext.setDocumentRendered(false);
System.out.println("hiiii 13");
if(pageContext.getParameter("Clear")!=null)
am.ClearFields(pageContext,webBean);
}can any one tell me how to set the bind parameters or setting parameterHi,
Could not understand your problem exactly. DId you try adding bind variables in the query like below:
AND hp.party_name='Business World'
AND csi.incident_date BETWEEN to_date('01-JAN-2000','DD-MON-YYYY') AND to_date('31-DEC-2008','DD-MON-YYYY')
change to
AND hp.party_name=:1
AND csi.incident_date BETWEEN :2 AND :3
Please note you will need three bind variables. Second and third for SR Dates.
~Amol -
How to set the heap size of JVM
please let me know that how to set the heap size of JVM
C:\>java -X
-Xmixed mixed mode execution (default)
-Xint interpreted mode execution only
-Xbootclasspath:<directories and zip/jar files separated by ;>
set search path for bootstrap classes and resources
-Xbootclasspath/a:<directories and zip/jar files separated by ;>
append to end of bootstrap class path
-Xbootclasspath/p:<directories and zip/jar files separated by ;>
prepend in front of bootstrap class path
-Xnoclassgc disable class garbage collection
-Xincgc enable incremental garbage collection
-Xbatch disable background compilation
-Xms<size> set initial Java heap size
-Xmx<size> set maximum Java heap size
-Xss<size> set java thread stack size
-Xprof output cpu profiling data
-Xrunhprof[:help]|[:<option>=<value>, ...]
perform JVMPI heap, cpu, or monitor profiling
-Xdebug enable remote debugging
-Xfuture enable strictest checks, anticipating future default
-Xrs reduce use of OS signals by Java/VM (see documentation)look at the -Xm? lines
-Xms<size> set initial Java heap size
-Xmx<size> set maximum Java heap sizeThis can be used e.g. like this:java -Xms8M -Xmx32M MyProgwhich runs MyProg in a java VM with the initial heap size of 8 MB and a maximum heap size of 32 MB.
- Marcus -
HOW TO SET THE OUR OWN LINE SPACING ?
hai frenz...
i jus wanted to know how to set the our own spacing between the records or lines...
i.e.,
there shub be no spacing between the records when its getting displayed...
for e,g.,
actually my records are in the output screen displaying like this.....
hyundai 100 200
maruthi 100 300
tata 200 200
but i want to be displayed like this...
hyundai 100 200
maruthi 100 300
tata 200 200
how to do that........ reply me....Hi,
Use SKIP Abap Statement
SKIP 2.
SKIP TO LINE 1.
SET BLANK LINES {ON|OFF}.
Example
REPORT demo_skip NO STANDARD PAGE HEADING.
DATA sum TYPE i.
TOP-OF-PAGE.
SKIP.
ULINE.
START-OF-SELECTION.
DO 10 TIMES.
WRITE / sy-index.
sum = sum + sy-index.
ENDDO.
SKIP TO LINE 1.
WRITE: 'Numbers with sum' COLOR COL_HEADING,
sum COLOR COL_TOTAL. -
How to set the default selection screen
I modified screen using screen-input = 0.
then how to set the screen-input = 1.
that is how to make that field input enable.
if use the statement screen-input = 1 directly it is giving 2 fields to enter valueIn the PBO / AT SELECTION-SCREEN OUPUT
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF screen-name = <your FIELD>. " Fields by name
* IF SCREEN-GROUP1 = <your group of fields>. " Fields with MODIF ID
IF <test>.
screen-input = 1. " For input enable
ELSE.
screen-input = 0. " For input disable
ENDIF.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Regards -
How to set the BARCODE width and length for label printing..
Hi All,
How to set the Code 39 barcode label format in the sizxe of 0.20" * 1.4". By default while printing barcode size exceeds my current requirement. Please let me know to customize the size of barcode labels.
Thanks.I don't know what you mean by "Code 39" because my Output Designer software doesn't offer that barcode (or do you mean "code 3 of 9?). In any case, are you trying to control the size of the text (which is what I think of when you refer to "label")? If you are, then just change the font & size. If you are wanting to modify the physical characteristics of the barcode itself (height & length for a certain number of characters) then you are probably out of luck. Or at least in for some trial & error.
There are a series of "barcode.xxx" files in the 'config' folder where Output Designer was installed to. These are text files that contain the physical characteristics of the various barcodes for various printers. The parameters that you would be interested in is the height and width of the bars (black & white). For example, a barcode might be defined as .400 high with narrow bars 3 "dots" wide, wide bars 9 "dots" wide and white space the same or different. Presumably changing these values would affect the generated barcode. For example, in this example the wide bars are 3 times the width of the narrow bars so I would assume that relationship would have to remain. To make the resulting barcode shorter you would then use 2 for the narrow and 6 for the wide.
You would have to make the change in the file(s) that would be used for your printer(s).
There are four width values for each of the parameters. Most of the barcodes only use 2 but some have 4. I'm assuming that when there are 4, like in "4 8 12 16", that the barcode definition has 4 different widths of bars and/or spaces.
There is no guarantee that the scanning hardware & software will "see" and interpret the resulting barcode correctly. -
How to stop the AppleTV from sharing directories
How can I set the AppleTV (or my Mac its streaming from) to stop sharing certain directories. For example, I'd like it to share the movies I've bought off iTunes, but not the music. How do I exclude directories? Thanks
As far as I can determine, AppleTV (3G running iOS6) cannot be set to abide by any list-trimming controls when accessing iTunes libraries. The very best you can do is turn on the parental controls on the AppleTV, and set the appropriate age-restrictions. You cannot have AppleTV ignore certain playlists, for instance.
Now, if Apple were smart, they would make AppleTV's home sharing work just like iTunes does:
On the master library machine, I set playlists for both music and movies that are age-appropriate. I only activate those playlists on the master machine's Sharing settings.
My kids can then use their Macs via iTunes to listen to or watch only that media. Works very well for all involved, and far more flexible than just the simplistic G/PG/R or explicit ratings. It utterly fails with any iOS device (iPhone or AppleTV). I'm dumbfounded why Apple would not have had two seemingly similar features (in OSX and iOS) work so very differently. Seems more granular control would be favorable than how clunky it is now. -
How to set the sampling interval using DAQ device?
Now I have a capacity sensor and a 24 bit DAQ device (http://www.mccdaq.com/usb-data-acquisition/USB-2404-10.aspx).
The DAQ device has the maximum sampling rate of 50kS/s . My question is how to set the interval of data collection. For example, if I set the sampling rate to 2000, in continuous sampling mode, I use DAQmx read.vi in a while loop and set the 'number of samples per channel' to 100. I want to plot these data as a function of time by using a XY graph and also save these data. So I add a 'Mean' function to get the average of the 100 samples per each loop (than means, there are 20 data output per second). But when I set the 'number of samples per channel' much smaller (to get more data per second), there are some problems. It seems that the program cannot read so many data and get the average at a higher frequency. I don't know where the problem is. All in all, how to collect data more frequently?Maybe I didn't express my question clearly. I'll upload a simple program later if necessary. Thanks.
Solved!
Go to Solution.Another question is in continuous mode, NI DAQmx uses Samples per channel to determine the buffer size. But according to the website you specified, it says if the acquisition is continuous (sample mode on the DAQmx Timing.vi is set to Continuous Samples), NI-DAQmx will allocate a buffer according to the following table. And for sample rate between 100 - 10,000 S/s, the buffer size is 10 kS. So if I set the sample rate to be 5000 S/s, and set the Samples per channel to be 20000, then what exactly the buffer size is? 20 kS or 10 kS?
Thanks. -
How to set input delay and output delay when source Synchronous
ClkIN is the board clock which is connected to the FPGA. Clkif is the generated clock from ClkIN. The Device's clk come from Clkif. So, how to set input delay and output delay in this scene(within my understand, this is Source Synchronous)?
The example in many document, the input delay and output delay setting all refer to board clock(within my understand, this is System Synchronous). In that scene, the input delay max = TDelay_max + Tco_max; input delay min = Tdelay_min + Tco_min; the output delay max = Tdelay_max + Tsu; output delay min = Tdelay_min - Th.
So, I want to know how to set input/output delay in the Source Synchronous.
In system synchronous, I set input/output delay such as:
create_clock -period 20.000 -name ClkIN -waveform {0.000 10.000} [get_ports ClkIN]
create_generated_clock -name Clkif -source [get_pins cfg_if/clk_tmp_reg/C] -divide_by 2 [get_pins cfg_if/clk_tmp_reg/Q]
create_clock -period 40.000 -name VIRTUAL_clkif //make virtual clock
set_input_delay -clock [get_clocks VIRTUAL_clkif] -min 0.530 [get_ports DIN]
set_input_delay -clock [get_clocks VIRTUAL_clkif] -max 7.700 [get_ports DIN]
set_output_delay -clock [get_clocks VIRTUAL_clkif] -min -0.030 [get_ports DOUT]
set_output_delay -clock [get_clocks VIRTUAL_clkif] -max 1.800 [get_ports DOUT]
*******************************************************************************************So, first. Architecturally, the clock that you forward to your external device should not come directly from the clock tree, but should be output via an ODDR with its D1 input tied to logic 1 and the D2 tied to logic 0. This guarantees minimal skew between the output data and the forwarded clock.
ODDR #(
.DDR_CLK_EDGE("OPPOSITE_EDGE"), // "OPPOSITE_EDGE" or "SAME_EDGE"
.INIT(1'b0), // Initial value of Q: 1'b0 or 1'b1
.SRTYPE("SYNC") // Set/Reset type: "SYNC" or "ASYNC"
) ODDR_inst (
.Q (Clkif_ff), // 1-bit DDR output
.C (ClkIN_BUFG), // 1-bit clock input
.CE (1'b1), // 1-bit clock enable input
.D1 (1'b1), // 1-bit data input (positive edge)
.D2 (1'b0), // 1-bit data input (negative edge)
.R (rst), // 1-bit reset
.S (1'b0) // 1-bit set
OBUF OBUF_inst (.I (Clkif_ff), .O (Clkif_out));
This generates an output clock that is the same frequency as your input clock. This is consistent with your drawing, but inconsistent with your constraints - is the forwarded clock a 50MHz clock or a 25MHz clock?
I will assume your ClkIN goes to a BUFG and generates ClkIN_BUFG. Your first constraint generates a 50MHz clock on the ClkIN port which will propagate through the BUFG to (among other places) this ODDR.
create_clock -period 20.000 -name ClkIN -waveform {0.000 10.000} [get_ports ClkIN]
Assuming your forwarded clock is supposed to be 50MHz, then your 2nd command is close to correct
create_generated_clock -name Clkif -source [get_pins cfg_if/ODDR_inst/C] -combinational [get_pins cfg_if/ODDR_inst/Q]
With this done, you have successfully described the forwarded clock from your design. This is the clock that goes to your device, and hence should be the clock which is used to specify your input and output constraints.
set_input_delay -clock [get_clocks Clkif] -min 0.530 [get_ports DIN]
set_input_delay -clock [get_clocks Clkif] -max 7.700 [get_ports DIN]
set_output_delay -clock [get_clocks Clkif] -min -0.030 [get_ports DOUT]
set_output_delay -clock [get_clocks Clkif] -max 1.800 [get_ports DOUT]
If you want to get fancier, you could try adding a set_clock_latency to the forwarded clock to account for the board propagation of the clock
set_clock_latency -source TDtrace2 [get_clocks Clkif]
(But I haven't experimented with clock latency on a generated clock and I don't know for a fact that it works).
Avrum -
SRM 4.0- How to set the default values for product type (01) only for SC
The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF -
How to set the background for all components?
hi
Does anybody know how to set the DEFAULT background color in an application.. I need it because in jdk 1.3 the default bgcolor is grey and in 1.5 it is white.. and I wish white as well.. so to make it also white in jdk 1.3 I need to use the (a bit annoying) anyContainer.setBackground( Color.white ); and these are lots in my app.. So my question is: is there such an overall class with a function (say UIManager.setComponentsBackground( Color color ) ) for such a purpose?
any tip or link would be greatly appreciatedDoes anybody know how to set the DEFAULT background color in an applicationthis might get you close
import java.awt.*;
import javax.swing.*;
import java.util.Enumeration;
class ApplicationColor extends JFrame
public ApplicationColor()
setApplicationColor(Color.RED);
setLocation(400,300);
setDefaultCloseOperation(EXIT_ON_CLOSE);
JPanel jp = new JPanel(new BorderLayout());
jp.add(new JTextField("I'm a textfield"),BorderLayout.NORTH);
jp.add(new JComboBox(new String[]{"abc","123"}),BorderLayout.CENTER);
jp.add(new JButton("I'm a button"),BorderLayout.SOUTH);
getContentPane().add(jp);
pack();
public void setApplicationColor(Color color)
Enumeration enum = UIManager.getDefaults().keys();
while(enum.hasMoreElements())
Object key = enum.nextElement();
Object value = UIManager.get(key);
if (value instanceof Color)
if(((String)key).indexOf("background") > -1)
UIManager.put(key, color);
public static void main(String[] args){new ApplicationColor().setVisible(true);}
} -
How to send the ALV GRID output to spool by using the print button in std t
How to send the ALV GRID output to spool by using the print button in standard tool bar.
We have created a button in the va02 transaction. If user click on the button the new screen will be display on that screen we are populating the alv grid output using the oops concept. But i am unable to send the output to spool using the print button in the standard tool bar.
I am able to display the Print parameter dialog box but i am not able to send it to spool.
Kindly help.
Thanks In Advance.
G.V.RamanaHi Shaik,
There is not properties button in my print screen.
MODULE user_command_0900 INPUT.
WHEN 'EXCEL'.
PERFORM excel_download.
WHEN 'PRI'.
PERFORM print_output.
form Print_output.
CALL FUNCTION 'RSPO_LIST_LAYOUT_FITS'
EXPORTING
columns = 80
device = 'ANY '
lines = 65
maxpenality = 1999
TABLES
layouts = lt_layouts1
EXCEPTIONS
unknown_device = 1
OTHERS = 2.
IF sy-subrc = 0.
LOOP AT lt_layouts1.
IF lt_layouts1-penality < 1000 AND
lt_layouts1-penality < l_min_penality.
l_layout = lt_layouts1-layout.
l_min_penality = lt_layouts1-penality.
ENDIF.
ENDLOOP.
IF NOT l_layout IS INITIAL.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
mode = 'CURRENT'
line_size = 80 "#EC *
new_list_id = l_new_list_id
no_dialog = l_no_dialog
layout = l_layout
IMPORTING
out_archive_parameters = rs_arc_params
out_parameters = rs_pri_params
valid = l_valid
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4.
IF sy-subrc NE 0. " INS SLIN
ENDIF. " INS SLIN
IF rs_pri_params-linsz LT 80 OR
rs_pri_params-linsz LT gt_stack-s_lprint-width.
gt_stack-print_line_break = 'X'.
ELSE.
CLEAR gt_stack-print_line_break.
ENDIF.
IF l_valid NE 'X'.
rs_pri_params = ls_pri_params_sav.
rs_arc_params = ls_arc_params_sav.
ENDIF.
ENDIF.
ENDIF.
endform. " Print_output
CALL METHOD gv_cost_tot_alv_grand->set_table_for_first_display
EXPORTING
is_layout = gs_layout_cost_tot_grand
CHANGING
it_fieldcatalog = gt_fcat_cost_tot_grand[]
it_outtab = gt_cost_tot_grand[].
Please check my code
Maybe you are looking for
-
Looking for a program like OnyX or Cocktail...
Well, I've got Windows 7 all up and running, and now, I'm looking for a program for Windows that's similar to OnyX. I know Windows has the "Disk Cleanup" feature, but it's really not that great. Anybody know of any programs that would do the same thi
-
Use of strstr() in solaris 8?
Hi, I can't use the strstr() when writing kernel modules in solaris 8. I compile using Forte C compiler but when I load my module, my system will crash. Is there any other function that can replace the strstr() or where can I get compatable strstr.o
-
Hello Experts, I get the following error while I try to export a COPA report by using the function "Copy report to XXL" and selecting all the characteristics: You cannot execute the function EXCR Message no. KH 124 Diagnosis The sequence of t
-
I have just upgraded from a MacBook Core Duo 2.0Ghz (mid-2006) to a MacBook Core 2 Duo 2.4Ghz (mid-2008). I had Windows XP (SP3) installed and running nicely on a partition on the old MacBook, and what I've now done is simply swapped that whole hard
-
Drivers for USB, Ethernet Controller, etc
I am not able to locate the drivers for a few of my hardware devices. The hardware IDs are: USB-Controller: PCI\VEN_8086&DEV_1E31&SUBSYS_1818103C&REV_04 PCI\VEN_8086&DEV_1E31&SUBSYS_1818103C PCI\VEN_8086&DEV_1E31&CC_0C0330 PCI\VEN_8086&DEV_1E31&CC_0C