How to set the command rate?

Hi mates!
How can I set the Ram command rate in the bios? I can't find anything about it. I also watched in the manual but nothing

gotti, I've found a way to do it, but it has to be set manually each time you reboot. I'm trying to see if there's a way to have it stay, or at the very least have it set automatically at every boot. stand by

Similar Messages

How to set the scan rate in the example "NI435x.vi" for the 435x DAQ device?

I am using LabVIEW 6i, A 4351 Temperature/Voltage DAQ, and am using the example vi "NI 435x thermocouple.vi"
How do I set the scan rate on this VI? I added a counter to just to see the time between acquisitions, and it is roughly 4s for only 4 channels. The Notch Filter is set at 60, but is there a control for scan rate on this example. I'd like to acquire around 1 Hz.

Using this DAQ example, it may be easiest to simply place a wait function in the loop and software time when the data is extracted from the board. You can also take a look a the NI-435x pallette and the examples it ships with, along with the timing specs on page 3-3 of the 435x manual and set the filters to meet your needs:
http://www.ni.com/pdf/manuals/321566c.pdf
Regards,
Chris

[Q] How to set the sampling rate separately?

Hello,
I'm using LV5.1 in Windows98 with SCXI-1200.
I want to set different sampling rate in each input channel.
I've ever used "AI acquire waveforms.vi" only.
Anybody can help me?
Example codes are highly appreciated.
Regards,
Hyun-ho Lee
[email protected]

The inputs of the SCXI-1200 are multiplexed to a single Analog-to-Digital converter. Because of this, the only difference in sampling rates that are achievable would be integer divisions of a common high frequency. This is functionally identical to acquiring all channels at the highest rate, and decimating (throwing away) data from channels that need lower data rates.

Sending image sequence job to compressor in command line : how to set the framerate?

Hello,
In Compressor, when you import a image sequence, it's possible to set the framerate and add an audio file before choosing a preset and lauching the encoding task.
I want to dlo the same thing with command line. I know how to send a compressor job with command line, but no how to add theses settings.
In the compressor command line help, we've got this :
Job Info: Used when submitting individual source files. Following parameters are repeated to enter multiple job targets in a batch
          -jobpath <url> -- url to source file.
                                           -- In case of Image Sequence, URL should be a file URL pointing to directory with image sequence.
                                           -- Additional parameters may be specified to set frameRate (e.g. frameRate=29.97) and audio file (e.g. audio=/usr/me/myaudiofile.mov).
So there are also framerate and audio parameters in command line but i've no idea how to write the command line with theses parameters
Here is an example of command line for Compressor (by Apple) :
./Compressor ‑clusterid tcp://127.0.0.1:51737 ‑batchname myBatch ‑jobpath /Volumes/Source/ShortClips/NTSC24p.mov ‑settingpath /Users/stomper10/Library/Application\ Support/Compressor/PhotoJPEG.setting ‑destinationpath /Users/machinename/Movies/myDestinationFilename.mov.
Thank you for your help!

You can see in the command sh running-config command
show running-config : Displays the current access point operating configuration
Use the guest-mode SSID configuration mode command to configure the radio interface (for the specified SSID) to support guest mode. Use the no form of the command to disable the guest mode.
[no] guest-mode .
Here is the guideline for usage
The access point can have one guest-mode SSID or none at all. The guest-mode SSID is used in beacon frames and response frames to probe requests that specify the empty or wildcard SSID. If no guest-mode SSID exists, the beacon contains no SSID and probe requests with the wildcard SSID are ignored. Disabling the guest mode makes the networks slightly more secure. Enabling the guest mode helps clients that passively scan (do not transmit) associate with the access point. It also allows clients configured without a SSID to associate.
Examples
This example shows how to set the wireless LAN for the specified SSID into guest mode:
AP(config-if-ssid)# guest-mode
This example shows how to reset the guest-mode parameter to default values:
AP(config-if-ssid)# no guest-mode

How do I set the frame rate to 12fps on my video, and it not change randomly?

Hi, I imported a video layer from file then set the frame rate to 12fps, when I play the video it keeps changing the frame rate to random times. How do I keep it at 12fps

Click the windows start button, then right click on computer, this will bring up a window that will tell you how much ram your system has.
Also Start>Accessories>System Tools>System Information will give you all the details you need to know.
As for Codec, That is an abreviation for code/decode it tells windows how to code when saving a video and how to decode when playing a video. Most formats are wrappers (avi, wmv, mov, rt) Each of these have a codec that you can choose from when saving a video, that codec then must be installed on the users computer to see that same video. Most formats come with a basic number of codecs and the creator of the video can purchase other codecs that provide better feature set.
What the codec really does is takes the video and compresses it like a zip file then the user when playing require that codec to uncompress it.
So each codec has its own strength and weaknesses. Some can compress more making a smaller file and perhaps inturn removes more data to get that compression and therefore has a poorer quailty video (just an example)
I am sure you heard of a few codecs if you think about it. mpg, mp2, mp3, mp4, h.264 and so on. Mp3 is the only one I listed here that is for audio only. Yep thats right even audio uses codecs.

How to set the router and play the Command & Conquer using direct IP mode?

My router is WRT54GFirmware Version: v3.03.1
How to set the router and play the Command & Conquer using direct IP mode with other computer?

Hi, when you say direct IP mode, what do you mean ? do you wanna play the game online or on the LAN ??
can you give a few more details.

How to set the Codec, Frame rate, Bit rate, and Resolution for iMovie 10.0.5

To upload a video to Vimeo, I need to be able to set the codec, frame rate, bit rate and resolution to make sure the file is compressed to under 500 MB. Where in iMovie 10.0.5 am I given the option to adjust these settings?
Thank you!

Another question is in continuous mode, NI DAQmx uses Samples per channel to determine the buffer size. But according to the website you specified, it says if the acquisition is continuous (sample mode on the DAQmx Timing.vi is set to Continuous Samples), NI-DAQmx will allocate a buffer according to the following table. And for sample rate between 100 - 10,000 S/s, the buffer size is 10 kS. So if I set the sample rate to be 5000 S/s, and set the Samples per channel to be 20000, then what exactly the buffer size is? 20 kS or 10 kS?
Thanks.

How can i set the Daq rate on the compactDAQ NI 9237?

I am using the NI 9237 module in the CompactDAQ 9172 chassis, with a single channel. I am using LabVIEW 8.2. I cannot find any software where I can set the DAQ rate on the module. The "daq assistant" in LabVIEW, the "Measurement and Automation explorer test panel and the example VI's all seem stuck at a rate of 5000 samples/sec. I only need 32 samples/sec. The software offers an input variable for "rate" but does not respond. Note that in the"Measurment and automation explorer test panel seems to allow higher rates but not lower. Am I missing something? My application has been crashing from time to time for not being able the retreive the data fast enough, I thought to minimize the rate to lower the transfer load on the operating system.

Hello Alfonso,
It sounds like you might be getting errors -200279 and -200278. (In the future, if you post the actual error codes, it helps us to know exactly what is happening). Error -200279 happens when you are performing a hardware-timed acquisition (meaning the data is sampled according to a clock signal on your board), but your LabVIEW program is not reading the values from the buffer allocated for that task in computer memory fast enough. Basically it's a buffer overflow error. It means older samples have been overwritten before you attempted to read them out. As the error message suggests, "increasing the buffer size, reading the data more frequently, or specifying a fixed number of samples to read instead of reading all available samples might correct the problem." For more information on this error, please see the KB (DAQmx) Error -200279 During a Continuous, Buffered Acquisition.
Error -200278 happens most often when you have configured a finite acquisition, but are calling the DAQmx Read function in a loop. If you want to perform a finite acquisition, you should only call DAQmx Read once. For more information on this error, see the KB Error -200278 at DAQmx Read.
Finally, please refer to Abhinav's earlier post about the sample rate on the 9237 module. As he described, the NI-DAQmx 8.3 driver will only allow you to set the sample clock to integer divisions of 50k (50,000/n, where n can be 1, 2, 3...13). Since the maximum divisor is 13, the smallest sample rate that can be used is 3.846 kS/s. You can check what value the driver is actually using for the sample clock by reading from the SampClk.Rate property of the DAQmx Timing property node.
I hope this helps! Let me know if you have any questions about what I've described.
Best regards,

IPC: How to read the Condition Rate(KBETR) in Java checkRequirement method.

Hi Experts,
As part of an IPC development, we need to read the Condition Type Rate (KBETR) in a Requirement Formula. The condition rate is the rate for the current record of the pricing procedure, e.g. Condition Type ZAB1.
I can successfully read the condition rate in a Value formula using this piece of code:
public BigDecimal overwriteConditionValue(IPricingItemUserExit pricingItem,IPricingConditionUserExit pricingCondition) {
                  BigDecimal ZConditionRate = pricingCondition.getConditionRate().getValue();
In a Value Formula "IPricingConditionUserExit pricingCondition" is a input parameter of the overwriteConditionValue() method. However in a Requirement formula the standard method checkRequirement(IConditionFindingManagerUserExit item, IStep step, IAccess access) does not have any parameter which can give me the rate.
I wrote the following logic in the requirement class, but line 2 is not executed.
1. public boolean checkRequirement(IConditionFindingManagerUserExit item, IStep step, IAccess access) {
     2. IPricingConditionUserExit pricingHeader = (IPricingConditionUserExit) item;
     3. BigDecimal ZConditionRate = pricingHeader.getConditionRate().getValue();
Please suggest how we can retrieve the condition rate in a requirement formula class using teh standard methods & classes.

Hi,
I have to set the condition rate as percentage in one of my codition value formula routine which i am developing based on java.
I have overwritten the method overwriteConditionValue() in my pricing routine which is 927. My logic is below.
When I open my quotation using crmd_order, condition rate is not being displayed with % for unit condition rate coulmn in my pricing conditions.
If I try to change my quotation for ex: Agrred price: xworke, then 927 formula is called and condition rate is displayed as %.
So condition rate value is displayed perfectly , but when my quotation is in display mode condition rate value is coming as USA, but it should be % irrespective of my quotation is in display mode or change mode. I have attached the two screen shots for quotation display mode and change mode.
Can some body throw insight what is wrong in my pricing routine logic in setting % condition rate rather than USD for the Condition rate value.
public BigDecimal overwriteConditionValue(IPricingItemUserExit pricingItem,
IPricingConditionUserExit pricingCondition) {
BigDecimal condValue = null;
BigDecimal discountValue = null;
try{
    BigDecimal xworkg = pricingItem.getSubtotal(PricingCustomizingConstants.ConditionSubtotal.SUBTOTAL_G).getValue();
    userexitlogger.writeLogDebug(" 927 formula, Date=["+new Date()+"] , xworkg=["+xworkg+"]");
    BigDecimal xworke = pricingItem.getSubtotal(PricingCustomizingConstants.ConditionSubtotal.SUBTOTAL_E).getValue();
    userexitlogger.writeLogDebug(" 927 formula, Date=["+new Date()+"], xworke=["+xworke+"]");
    pricingCondition.setCalculationType(PricingCustomizingConstants.CalculationType.PERCENTAGE);
    if (xworkg.compareTo(PricingTransactiondataConstants.ZERO) != 0) {
    condValue = xworkg.subtract(xworke);
    pricingCondition.setConditionValue(condValue);
    // Calculate percentage with 3-decimal-precision (as does ABAP-Version by multiplying with 100.000 instead of 100)
    pricingCondition.setConditionRate(condValue.multiply(PricingTransactiondataConstants.HUNDRED).divide(xworkg,
      3, BigDecimal.ROUND_HALF_UP), "%");
    pricingCondition.setPricingUnit(new BigDecimal(0), null);
    else {
    pricingCondition.setConditionRate(PricingTransactiondataConstants.ZERO, "%");
    pricingCondition.setPricingUnit(new BigDecimal(0), null);
catch (Exception ex) {
    //pricingCondition.setInactive(PricingCustomizingConstants.InactiveFlag.INACTIVE_DUE_TO_ERROR);
    userexitlogger.writeLogError("Error Occured in 927 formula, reason code=["+ex.getMessage()+"]");
    return null;
//return condValue;
return null;
Thanks
Srikar

How to set the out point beyond 9.95 seconds???

how to set the out point in Motion 5 beyond 9.95 seconds???

First you need to make sure your project is long enough then you can adjust the play range (in/out). To make sure the project is long enough:
1. From the project properties (command-J) go to the Duration field and enter a new duration.
2. Click on the down arrow icon to the right of the current time, there is an option to show the project duration. Once set to this you can double click the number and type in a new project duration. I'd recommend setting it back to show current time when done.
3. Of course you can also change the duration of a project when it is first created, in the project browser.
Once you're sure you have a long enough project you can adjust the in and out range. You then use the zoom controls in the bottom of the timeline to show more of the timeline and adjust the play range as needed. There's lots more about project and play range duration adjustments in the documentation: http://help.apple.com/motion/mac/5.1/

How to set the width of DataGridColumn dynamically?

What I want to do is, load data from a text file and put into a DataGrid component, the fields of ech record in the text have fixed length, and are seperated by a space, like this:
personal.txt
50 Uvwxyz Male    123456789
60 Hijklmn Male    67890123456789
30 Abcdefg Male    123456789012345
40 Opqrst   Female 987654321012345678
the configuration file is column.xml:
<dgcolumn>
     <personal>
          <len>20</len>
          <title>Name</title>
     </personal>
     <personal>
          <len>3</len>
          <title>Age</title>
     </personal>
     <personal>
          <len>6</len>
          <title>Sex</title>
     </personal>
     <personal>
          <len>20</len>
          <title>IdNumber</title>
     </personal>
</dgcolumn>
First I load the column.xml into an arrColumn, then read the personal.txt and seperate the record by the width( "len" in the xml file ), and put the seperated fields into another arrField, set the arrayFld as the dataProvider of a DataGrid, thus, the title can be showed as the headerText of the DataGrid and the data can be loaded correctly.
private function handleComplete( event:Event ):void
     var arrField:Array = new Array();
     var arrFile:Array = loader.data.split(/\n/);
     for( var i:int = 0; i < arrColumn.length; i ++ )
          arrField[i] = convIcom( arrFile[i] );
     adgFile.dataProvider = arrField;
     trace( "The data has successfully loaded" );
private function convIcom( strRecord:String ):Object
     var key:String = null;
     var dataField:String = null;
     var offset:int = 0;
     var obj:Object = new Object();
     if( strRecord.length > 0 )
          for( var i:int = 0; i < arrColumn.length; i ++ )
               dataField = strRecord.substr( offset, arrColumn[i].len );
               key = arrColumn[i].title;
               obj[key] = dataField;
               offset += arrColumn[i].len + 1;
     return obj;
<mx:DataGrid x="10" y="100" width="400" id="dgFile" />
The problem is, the width of the DataGridColumn is average, how to set the column width by the length of each field? I can calculate the rate of each field ( field / fields ), but I don't know how to change the property of the DataGridColumn.width.
Thanks for helping.

In the above post, I pasted an old version of personal.txt, so I paste it again:
personal.txt
Uvwxyz 50 Male   123456789
Hijklmn 60 Male   67890123456789
Opqrst 40 Female 987654321012345678
Abcdefg 30 Male   123456789012345
And I have another question, when the data is loaded into the DataGrid, the fields of each record are ordered in alphabetical order ( the "Age" column will appear firstly, then "IdNumber", "Name", "Sex" ), not as the order in column.xml, how to make it keep the sequence of the xml file?
Thanks again.

How to set the PATH in Terminal?

As a newbie to Bash and the Terminal, in connection with installing a new version of Ruby and various add-ons, I have been messing around with changing the PATH via various methods I've found on the internet, and trying to add a new directory to my PATH. Unfortunately, I cannot figure out how to set the PATH correctly. Here is what I understand so far:
1. Bash first looks to ".bash_profile" in the home directory for PATH settings.
2. If none, Bash then looks to ".bash_login" for PATH settings.
3. If none, Bash then looks to ".profile".
4. If none, Bash then looks to a system file in "/etc/profile" for default PATH settings.
5. For a new shell after login, Bash looks for a ".bashrc" file.
I cannot find any of the above files (I have Finder set to show hidden files already). Somehow, following some instructions from the internet without really knowing what I was doing over the past week I have set my PATH as follows:
/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/Users/*****/src:/usr/X11/bin
but I cannot find the file that is setting this PATH. I have tried creating a new ".bash_profile" shell file and putting it in various places such as "/bin" and "/usr/bin" but the file is not being read.
* As a temporary workaround I tried using the command "source .bash_profile" upon login to set the PATH using the .bash_profile file that I created, but it does not work.
* I am able to temporarily alter the path using the command "PATH=/usr/local/bin:$PATH" but this only lasts for an active shell; when I close out and reopen a new shell, it reverts to the default.
So my questions are:
Is it correct that there is a "/etc/profile" somewhere that is setting the default PATH? If so where is it? Should I alter it, or create a new ".bash_profile" somewhere to set the PATH? If not, where is my PATH being set? If I should create a new ".bash_profile", what exactly should go in it?
Thanks in advance for any assistance.

... I created a new ".bash_profile" file directly under my home directory and it worked like a charm. Below is the content of the file:
"PATH=/usr/local/bin:/bin/:/sbin/:/usr/bin/:/usr/sbin/:/Users/******/Ruby:/Users/*******/src:/Users/******/Java Programs/"
What are the "..."'s? Is that just you, or is the contents of the file actually inside of double quotes?
is there an 'export PATH' also in the file? As in
PATH=/usr/local/bin:/bin/:/sbin/:/usr/bin/:/usr/sbin/:/Users/******/Ruby:/Users/*******/src:/Users/******/Java Programs/
export PATH
And did you either restart your Terminal session so your .bash_profile was read, or issue a 'source .bash_profile' command to execute the .bash_profile after your change?
The only remaining problem is that from the home directory, I'm unable to directly run programs in the above-designated subdirectories (without first navigating to the subdirectory containing the file. Is there something wrong with the syntax or order of the directories I put in the path?
For example: there is a file called "newprogram.rb" in the "Ruby" directory listed above. I should be able to execute it from the home directory using "ruby newprogram.rb" but it does not work. The same command works fine from within the "Ruby" directory.
Does the 'ruby' command search PATH to find its scripts?
Have you read the "man ruby" man page to see if it talks about PATH?
A common Unix feature is that programs and scripts with the executable bit set, and are located in a PATH directory, will be run if you just type their names.
For example, if the first line of newprogram.rb script starts with
#!/usr/bin/ruby
and if the script is executable
chmod +x newprogram.rb
And if it is in a directory in PATH, then just typing
newprogram.rb
should run your perl script using /usr/bin/ruby. If you want to use a different version of Ruby, then change the #! line so it point to your version of Ruby. Or if your version of Ruby is found earlier in PATH then the /usr/bin/ruby, you can use
#!/usr/bin/env ruby
as your script's first line which will search PATH for 'ruby' and use the first one it finds.
Message was edited by: BobHarris

How can hide the command line of a t.code in the portal

Dear Experts.
I have the following doubt:
How can hide the Command Line of a Report that is called with a T.Code in the portal?
Attach Image:
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
When I created a service using the T.Code SICF for the T.Code , I can hide buttons and the filed command line using
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
With notes 1010519, "SAP GUI for HTML: Simplified Title Area Without Menu and OK Code" and 959417.
But the problem is that when I create the service in the T.Code SICF, I also have that create an Iview IAC in the portal.
The Question is : How can hide this fields and buttons if I want Publish the T.code using an Iview Transaction in the portal?
In this moment I have used the two options:
1 option) I created a service using the t.Code SICF for my Transaction and I also created an Iview IAC in the portal for call the service.
RESULT:
SAP Web Application Server
         500 Connection timed out
        Error: -5
       Version: 7000
       Component: ICM
       Date/Time: Sat Jun 12 20:26:39 2010
       Module: icxxthr_mt.c
       Line: 2698
       Server: xyxab...
Error Tag: {-}
Detail: Connection to partner timed out after 60s
2) created an Iview Transaction in the portal and call my transaction.
RESULT.
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
But not can hide the field Command Line and other buttons.
I think that the command :
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
Only can be used if I create a service using the T.Code SICF .
Best Regards
Carmen.

Hi Carmen,
The bottom line is that this cannot be done for transaction iviews without modifying the standard webgui service in SICF, which is probably not a good idea (since it affects everyone using SAP GUI for HTML). (You could hack the appintegrator to add the ~webgui_simple_toolbar parameter to the transaction URL template in the portal, but again its not a recommended thing to do ...). Better to create an IAC service in SICF with ~webgui=1 where you set the required appearance using an appropriate value for ~webgui_simple_toolbar, and then create an IAC iview to point at this service.
You can even override the ~transaction value configured in the new service in individual IAC iviews by entering the appropriate value in the application parameter of the iview, for example:
~okcode=/nSU01
And you can pass parameters in the same way:
~okcode=/nSU01 USR02-BNAME=xyz;USREFUS-USERALIAS=abc;
By the way, it would not be recommended to create a URL iview to access an IAC, since you are likely to encounter session management issues in this scenario - better to use an IAC iview.
Regards, Rory

How to set the transition duration of a slide in keynote with applescript

hi
how to set the transition duration of a slide in keynote with applescript
i made an applescript script which converts a numbers file to a keynote presentation
figured out how to set the transitions but cant find how to set the time
+set appTransition of slideTransition of current slide to "apple:dissolve"+
anyone?

you can send keystrokes to invoke menu commands via shortcuts but as for transition time not sure. You've check the dictionary right? Scripting support is very limited in KN.

How to set the resource_limit parameter to each user

how to set the resource_limit initialization parameter to each user.
it says like this;
You must modify the RESOURCE_LIMIT initialization parameter. After you assign profiles to users, the Oracle database
enforces the limits only when the RESOURCE_LIMIT parameter is set to TRUE. Therefore, you modify the RESOURCE_LIMIT initialization parameter to enforce the resource limits defined within each user's profile.
alter system set resource_limit=true;
if doing like this is it ok. ????
Assume im logged as user "SYS". so if i use this command, will it alter the resource_limit parameter for this user SYS only OR for the entire database..... (for all other user)

The RESOURCE_LIMIT parameter only enables resource limits that are defined in profiles.
The DEFAULT profile, by default, is UNLIMITED for all resources.
You should create a custom profile and set the limits you need. The next step would be to assign that profile to the users whom you want to limit. Other users in other profiles (or in the DEFAULT profile) would not have any limits enforced.
See the documentation on CREATE PROFILE.
See http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_6010.htm#i2065930

How to set the command rate?

Similar Messages

Maybe you are looking for