How to set the computer to a workgroup and attach to a domain
I have been a Windows user for quite some time. I have just acquired an eMac installed with version 10.2. I have looked up the Network applet but couldn't work out where to set up the work group or attach it to a domain. Can somebody help me please? Thank you!
eMac Mac OS X (10.2.x)
UIManager.put("MenuItem.selectionBackground", Color.orange);
For a list of all the properties that can be changed using the UIManager, see:
http://www.discoverteenergy.com/files/ShowUIDefaults.java
Similar Messages
-
How to set the correct shared pool size and db_buffer_cache using awr
Hi All,
I want to how to set the correct size for shared_pool_size and db_cache_size using shared pool advisory and buffer pool advisory of awr report. I have paste the shared and buffer pool advisory of awr report.
Shared Pool Advisory
* SP: Shared Pool Est LC: Estimated Library Cache Factr: Factor
* Note there is often a 1:Many correlation between a single logical object in the Library Cache, and the physical number of memory objects associated with it. Therefore comparing the number of Lib Cache objects (e.g. in v$librarycache), with the number of Lib Cache Memory Objects is invalid.
Shared Pool Size(M) SP Size Factr Est LC Size (M) Est LC Mem Obj Est LC Time Saved (s) Est LC Time Saved Factr Est LC Load Time (s) Est LC Load Time Factr Est LC Mem Obj Hits (K)
4,096 1.00 471 25,153 184,206 1.00 149 1.00 9,069
4,736 1.16 511 27,328 184,206 1.00 149 1.00 9,766
5,248 1.28 511 27,346 184,206 1.00 149 1.00 9,766
5,760 1.41 511 27,346 184,206 1.00 149 1.00 9,766
6,272 1.53 511 27,346 184,206 1.00 149 1.00 9,766
6,784 1.66 511 27,346 184,206 1.00 149 1.00 9,766
7,296 1.78 511 27,346 184,206 1.00 149 1.00 9,766
7,808 1.91 511 27,346 184,206 1.00 149 1.00 9,766
8,320 2.03 511 27,346 184,206 1.00 149 1.00 9,766
Buffer Pool Advisory
* Only rows with estimated physical reads >0 are displayed
* ordered by Block Size, Buffers For Estimate
P Size for Est (M) Size Factor Buffers (thousands) Est Phys Read Factor Estimated Phys Reads (thousands) Est Phys Read Time Est %DBtime for Rds
D 4,096 0.10 485 1.02 1,002 1 0.00
D 8,192 0.20 970 1.00 987 1 0.00
D 12,288 0.30 1,454 1.00 987 1 0.00
D 16,384 0.40 1,939 1.00 987 1 0.00
D 20,480 0.50 2,424 1.00 987 1 0.00
D 24,576 0.60 2,909 1.00 987 1 0.00
D 28,672 0.70 3,394 1.00 987 1 0.00
D 32,768 0.80 3,878 1.00 987 1 0.00
D 36,864 0.90 4,363 1.00 987 1 0.00
D 40,960 1.00 4,848 1.00 987 1 0.00
D 45,056 1.10 5,333 1.00 987 1 0.00
D 49,152 1.20 5,818 1.00 987 1 0.00
D 53,248 1.30 6,302 1.00 987 1 0.00
D 57,344 1.40 6,787 1.00 987 1 0.00
D 61,440 1.50 7,272 1.00 987 1 0.00
D 65,536 1.60 7,757 1.00 987 1 0.00
D 69,632 1.70 8,242 1.00 987 1 0.00
D 73,728 1.80 8,726 1.00 987 1 0.00
D 77,824 1.90 9,211 1.00 987 1 0.00
D 81,920 2.00 9,696 1.00 987 1 0.00
My shared pool size is 4gb and db_cache_size is 40Gb.
Please help me in configuring the correct size for this.
Thanks and Regards,Hi ,
Actually batch load is taking too much time.
Please find below the 1 hr awr report
Snap Id Snap Time Sessions Cursors/Session
Begin Snap: 6557 27-Nov-11 16:00:06 126 1.3
End Snap: 6558 27-Nov-11 17:00:17 130 1.6
Elapsed: 60.17 (mins)
DB Time: 34.00 (mins)
Report Summary
Cache Sizes
Begin End
Buffer Cache: 40,960M 40,960M Std Block Size: 8K
Shared Pool Size: 4,096M 4,096M Log Buffer: 25,908K
Load Profile
Per Second Per Transaction Per Exec Per Call
DB Time(s): 0.6 1.4 0.00 0.07
DB CPU(s): 0.5 1.2 0.00 0.06
Redo size: 281,296.9 698,483.4
Logical reads: 20,545.6 51,016.4
Block changes: 1,879.5 4,667.0
Physical reads: 123.7 307.2
Physical writes: 66.4 164.8
User calls: 8.2 20.4
Parses: 309.4 768.4
Hard parses: 8.5 21.2
W/A MB processed: 1.7 4.3
Logons: 0.7 1.6
Executes: 1,235.9 3,068.7
Rollbacks: 0.0 0.0
Transactions: 0.4
Instance Efficiency Percentages (Target 100%)
Buffer Nowait %: 100.00 Redo NoWait %: 100.00
Buffer Hit %: 99.66 In-memory Sort %: 100.00
Library Hit %: 99.19 Soft Parse %: 97.25
Execute to Parse %: 74.96 Latch Hit %: 99.97
Parse CPU to Parse Elapsd %: 92.41 % Non-Parse CPU: 98.65
Shared Pool Statistics
Begin End
Memory Usage %: 80.33 82.01
% SQL with executions>1: 90.90 86.48
% Memory for SQL w/exec>1: 90.10 86.89
Top 5 Timed Foreground Events
Event Waits Time(s) Avg wait (ms) % DB time Wait Class
DB CPU 1,789 87.72
db file sequential read 27,531 50 2 2.45 User I/O
db file scattered read 26,322 30 1 1.47 User I/O
row cache lock 1,798 20 11 0.96 Concurrency
OJVM: Generic 36 15 421 0.74 Other
Host CPU (CPUs: 24 Cores: 12 Sockets: )
Load Average Begin Load Average End %User %System %WIO %Idle
0.58 1.50 2.8 0.7 0.1 96.6
Instance CPU
%Total CPU %Busy CPU %DB time waiting for CPU (Resource Manager)
2.2 63.6 0.0
Memory Statistics
Begin End
Host Mem (MB): 131,072.0 131,072.0
SGA use (MB): 50,971.4 50,971.4
PGA use (MB): 545.5 1,066.3
% Host Mem used for SGA+PGA: 39.30 39.70
RAC Statistics
Begin End
Number of Instances: 2 2
Global Cache Load Profile
Per Second Per Transaction
Global Cache blocks received: 3.09 7.68
Global Cache blocks served: 1.86 4.62
GCS/GES messages received: 78.64 195.27
GCS/GES messages sent: 53.82 133.65
DBWR Fusion writes: 0.52 1.30
Estd Interconnect traffic (KB) 65.50
Global Cache Efficiency Percentages (Target local+remote 100%)
Buffer access - local cache %: 99.65
Buffer access - remote cache %: 0.02
Buffer access - disk %: 0.34
Global Cache and Enqueue Services - Workload Characteristics
Avg global enqueue get time (ms): 0.0
Avg global cache cr block receive time (ms): 1.7
Avg global cache current block receive time (ms): 1.0
Avg global cache cr block build time (ms): 0.0
Avg global cache cr block send time (ms): 0.0
Global cache log flushes for cr blocks served %: 1.4
Avg global cache cr block flush time (ms): 0.9
Avg global cache current block pin time (ms): 0.0
Avg global cache current block send time (ms): 0.0
Global cache log flushes for current blocks served %: 0.1
Avg global cache current block flush time (ms): 0.0
Global Cache and Enqueue Services - Messaging Statistics
Avg message sent queue time (ms): 0.0
Avg message sent queue time on ksxp (ms): 0.4
Avg message received queue time (ms): 0.5
Avg GCS message process time (ms): 0.0
Avg GES message process time (ms): 0.0
% of direct sent messages: 79.13
% of indirect sent messages: 17.10
% of flow controlled messages: 3.77
Cluster Interconnect
Begin End
Interface IP Address Pub Source IP Pub Src
en9 10.51.10.61 N Oracle Cluster Repository
Main Report
* Report Summary
* Wait Events Statistics
* SQL Statistics
* Instance Activity Statistics
* IO Stats
* Buffer Pool Statistics
* Advisory Statistics
* Wait Statistics
* Undo Statistics
* Latch Statistics
* Segment Statistics
* Dictionary Cache Statistics
* Library Cache Statistics
* Memory Statistics
* Streams Statistics
* Resource Limit Statistics
* Shared Server Statistics
* init.ora Parameters
More RAC Statistics
* RAC Report Summary
* Global Messaging Statistics
* Global CR Served Stats
* Global CURRENT Served Stats
* Global Cache Transfer Stats
* Interconnect Stats
* Dynamic Remastering Statistics
Back to Top
Statistic Name Time (s) % of DB Time
sql execute elapsed time 1,925.20 94.38
DB CPU 1,789.38 87.72
connection management call elapsed time 99.65 4.89
PL/SQL execution elapsed time 89.81 4.40
parse time elapsed 46.32 2.27
hard parse elapsed time 25.01 1.23
Java execution elapsed time 21.24 1.04
PL/SQL compilation elapsed time 11.92 0.58
failed parse elapsed time 9.37 0.46
hard parse (sharing criteria) elapsed time 8.71 0.43
sequence load elapsed time 0.06 0.00
repeated bind elapsed time 0.02 0.00
hard parse (bind mismatch) elapsed time 0.01 0.00
DB time 2,039.77
background elapsed time 122.00
background cpu time 113.42
Statistic Value End Value
NUM_LCPUS 0
NUM_VCPUS 0
AVG_BUSY_TIME 12,339
AVG_IDLE_TIME 348,838
AVG_IOWAIT_TIME 221
AVG_SYS_TIME 2,274
AVG_USER_TIME 9,944
BUSY_TIME 299,090
IDLE_TIME 8,375,051
IOWAIT_TIME 6,820
SYS_TIME 57,512
USER_TIME 241,578
LOAD 1 2
OS_CPU_WAIT_TIME 312,200
PHYSICAL_MEMORY_BYTES 137,438,953,472
NUM_CPUS 24
NUM_CPU_CORES 12
GLOBAL_RECEIVE_SIZE_MAX 1,310,720
GLOBAL_SEND_SIZE_MAX 1,310,720
TCP_RECEIVE_SIZE_DEFAULT 16,384
TCP_RECEIVE_SIZE_MAX 9,223,372,036,854,775,807
TCP_RECEIVE_SIZE_MIN 4,096
TCP_SEND_SIZE_DEFAULT 16,384
TCP_SEND_SIZE_MAX 9,223,372,036,854,775,807
TCP_SEND_SIZE_MIN 4,096
Back to Wait Events Statistics
Back to Top
Operating System Statistics - Detail
Snap Time Load %busy %user %sys %idle %iowait
27-Nov 16:00:06 0.58
27-Nov 17:00:17 1.50 3.45 2.79 0.66 96.55 0.08
Back to Wait Events Statistics
Back to Top
Foreground Wait Class
* s - second, ms - millisecond - 1000th of a second
* ordered by wait time desc, waits desc
* %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
* Captured Time accounts for 95.7% of Total DB time 2,039.77 (s)
* Total FG Wait Time: 163.14 (s) DB CPU time: 1,789.38 (s)
Wait Class Waits %Time -outs Total Wait Time (s) Avg wait (ms) %DB time
DB CPU 1,789 87.72
User I/O 61,229 0 92 1 4.49
Other 102,743 40 31 0 1.50
Concurrency 3,169 10 24 7 1.16
Cluster 58,920 0 11 0 0.52
System I/O 45,407 0 6 0 0.29
Configuration 107 7 1 5 0.03
Commit 383 0 0 1 0.01
Network 15,275 0 0 0 0.00
Application 52 8 0 0 0.00
Back to Wait Events Statistics
Back to Top
Foreground Wait Events
* s - second, ms - millisecond - 1000th of a second
* Only events with Total Wait Time (s) >= .001 are shown
* ordered by wait time desc, waits desc (idle events last)
* %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
Event Waits %Time -outs Total Wait Time (s) Avg wait (ms) Waits /txn % DB time
db file sequential read 27,531 0 50 2 18.93 2.45
db file scattered read 26,322 0 30 1 18.10 1.47
row cache lock 1,798 0 20 11 1.24 0.96
OJVM: Generic 36 42 15 421 0.02 0.74
db file parallel read 394 0 7 19 0.27 0.36
control file sequential read 22,248 0 6 0 15.30 0.28
reliable message 4,439 0 4 1 3.05 0.18
gc current grant busy 7,597 0 3 0 5.22 0.16
PX Deq: Slave Session Stats 2,661 0 3 1 1.83 0.16
DFS lock handle 3,208 0 3 1 2.21 0.16
direct path write temp 4,842 0 3 1 3.33 0.15
library cache load lock 39 0 3 72 0.03 0.14
gc cr multi block request 37,008 0 3 0 25.45 0.14
IPC send completion sync 5,451 0 2 0 3.75 0.10
gc cr block 2-way 4,669 0 2 0 3.21 0.09
enq: PS - contention 3,183 33 1 0 2.19 0.06
gc cr grant 2-way 5,151 0 1 0 3.54 0.06
direct path read temp 1,722 0 1 1 1.18 0.05
gc current block 2-way 1,807 0 1 0 1.24 0.03
os thread startup 6 0 1 108 0.00 0.03
name-service call wait 12 0 1 47 0.01 0.03
PX Deq: Signal ACK RSG 2,046 50 0 0 1.41 0.02
log file switch completion 3 0 0 149 0.00 0.02
rdbms ipc reply 3,610 0 0 0 2.48 0.02
gc current grant 2-way 1,432 0 0 0 0.98 0.02
library cache pin 903 32 0 0 0.62 0.02
PX Deq: reap credit 35,815 100 0 0 24.63 0.01
log file sync 383 0 0 1 0.26 0.01
Disk file operations I/O 405 0 0 0 0.28 0.01
library cache lock 418 3 0 0 0.29 0.01
kfk: async disk IO 23,159 0 0 0 15.93 0.01
gc current block busy 4 0 0 35 0.00 0.01
gc current multi block request 1,206 0 0 0 0.83 0.01
ges message buffer allocation 38,526 0 0 0 26.50 0.00
enq: FB - contention 131 0 0 0 0.09 0.00
undo segment extension 8 100 0 6 0.01 0.00
CSS initialization 8 0 0 6 0.01 0.00
SQL*Net message to client 14,600 0 0 0 10.04 0.00
enq: HW - contention 96 0 0 0 0.07 0.00
CSS operation: action 8 0 0 4 0.01 0.00
gc cr block busy 33 0 0 1 0.02 0.00
latch free 30 0 0 1 0.02 0.00
enq: TM - contention 49 6 0 0 0.03 0.00
enq: JQ - contention 19 100 0 1 0.01 0.00
SQL*Net more data to client 666 0 0 0 0.46 0.00
asynch descriptor resize 3,179 100 0 0 2.19 0.00
latch: shared pool 3 0 0 3 0.00 0.00
CSS operation: query 24 0 0 0 0.02 0.00
PX Deq: Signal ACK EXT 72 0 0 0 0.05 0.00
KJC: Wait for msg sends to complete 269 0 0 0 0.19 0.00
latch: object queue header operation 4 0 0 1 0.00 0.00
gc cr block congested 5 0 0 0 0.00 0.00
utl_file I/O 11 0 0 0 0.01 0.00
enq: TO - contention 3 33 0 0 0.00 0.00
SQL*Net message from client 14,600 0 219,478 15033 10.04
jobq slave wait 7,726 100 3,856 499 5.31
PX Deq: Execution Msg 10,556 19 50 5 7.26
PX Deq: Execute Reply 2,946 31 27 9 2.03
PX Deq: Parse Reply 3,157 35 3 1 2.17
PX Deq: Join ACK 2,976 28 2 1 2.05
PX Deq Credit: send blkd 7 14 0 4 0.00
Back to Wait Events Statistics
Back to Top
Background Wait Events
* ordered by wait time desc, waits desc (idle events last)
* Only events with Total Wait Time (s) >= .001 are shown
* %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
Event Waits %Time -outs Total Wait Time (s) Avg wait (ms) Waits /txn % bg time
os thread startup 140 0 13 90 0.10 10.35
db file parallel write 8,233 0 6 1 5.66 5.08
log file parallel write 3,906 0 6 1 2.69 4.62
log file sequential read 350 0 5 16 0.24 4.49
control file sequential read 13,737 0 5 0 9.45 3.72
DFS lock handle 2,990 27 2 1 2.06 1.43
db file sequential read 921 0 2 2 0.63 1.39
SQL*Net break/reset to client 18 0 1 81 0.01 1.19
control file parallel write 2,455 0 1 1 1.69 1.12
ges lms sync during dynamic remastering and reconfig 24 100 1 50 0.02 0.98
library cache load lock 35 0 1 24 0.02 0.68
ASM file metadata operation 3,483 0 1 0 2.40 0.65
enq: CO - master slave det 1,203 100 1 0 0.83 0.46
kjbdrmcvtq lmon drm quiesce: ping completion 9 0 1 62 0.01 0.46
enq: WF - contention 11 0 0 35 0.01 0.31
CGS wait for IPC msg 32,702 100 0 0 22.49 0.19
gc object scan 28,788 100 0 0 19.80 0.15
row cache lock 535 0 0 0 0.37 0.14
library cache pin 370 55 0 0 0.25 0.12
ksxr poll remote instances 19,119 100 0 0 13.15 0.11
name-service call wait 6 0 0 19 0.00 0.10
gc current block 2-way 304 0 0 0 0.21 0.09
gc cr block 2-way 267 0 0 0 0.18 0.08
gc cr grant 2-way 355 0 0 0 0.24 0.08
ges LMON to get to FTDONE 3 100 0 24 0.00 0.06
enq: CF - contention 145 76 0 0 0.10 0.05
PX Deq: reap credit 8,842 100 0 0 6.08 0.05
reliable message 126 0 0 0 0.09 0.05
db file scattered read 19 0 0 3 0.01 0.05
library cache lock 162 1 0 0 0.11 0.04
latch: shared pool 2 0 0 27 0.00 0.04
Disk file operations I/O 504 0 0 0 0.35 0.04
gc current grant busy 148 0 0 0 0.10 0.04
gcs log flush sync 84 0 0 1 0.06 0.04
ges message buffer allocation 24,934 0 0 0 17.15 0.02
enq: CR - block range reuse ckpt 83 0 0 0 0.06 0.02
latch free 22 0 0 1 0.02 0.02
CSS operation: action 13 0 0 2 0.01 0.02
CSS initialization 4 0 0 6 0.00 0.02
direct path read 1 0 0 21 0.00 0.02
rdbms ipc reply 153 0 0 0 0.11 0.01
db file parallel read 2 0 0 8 0.00 0.01
direct path write 5 0 0 3 0.00 0.01
gc current multi block request 49 0 0 0 0.03 0.01
gc current block busy 5 0 0 2 0.00 0.01
enq: PS - contention 24 50 0 0 0.02 0.01
gc cr multi block request 54 0 0 0 0.04 0.01
ges generic event 1 100 0 10 0.00 0.01
gc current grant 2-way 35 0 0 0 0.02 0.01
kfk: async disk IO 183 0 0 0 0.13 0.01
Log archive I/O 3 0 0 2 0.00 0.01
gc buffer busy acquire 2 0 0 3 0.00 0.00
LGWR wait for redo copy 123 0 0 0 0.08 0.00
IPC send completion sync 18 0 0 0 0.01 0.00
enq: TA - contention 11 0 0 0 0.01 0.00
read by other session 2 0 0 2 0.00 0.00
enq: TM - contention 9 89 0 0 0.01 0.00
latch: ges resource hash list 135 0 0 0 0.09 0.00
PX Deq: Slave Session Stats 12 0 0 0 0.01 0.00
KJC: Wait for msg sends to complete 89 0 0 0 0.06 0.00
enq: TD - KTF dump entries 8 0 0 0 0.01 0.00
enq: US - contention 7 0 0 0 0.00 0.00
CSS operation: query 12 0 0 0 0.01 0.00
enq: TK - Auto Task Serialization 6 100 0 0 0.00 0.00
PX Deq: Signal ACK RSG 24 50 0 0 0.02 0.00
log file single write 6 0 0 0 0.00 0.00
enq: WL - contention 2 100 0 1 0.00 0.00
ADR block file read 13 0 0 0 0.01 0.00
ADR block file write 5 0 0 0 0.00 0.00
latch: object queue header operation 1 0 0 1 0.00 0.00
gc cr block busy 1 0 0 1 0.00 0.00
rdbms ipc message 103,276 67 126,259 1223 71.03
PX Idle Wait 6,467 67 12,719 1967 4.45
wait for unread message on broadcast channel 7,240 100 7,221 997 4.98
gcs remote message 218,809 84 7,213 33 150.49
DIAG idle wait 203,228 95 7,185 35 139.77
shared server idle wait 121 100 3,630 30000 0.08
ASM background timer 3,343 0 3,611 1080 2.30
Space Manager: slave idle wait 723 100 3,610 4993 0.50
heartbeat monitor sleep 722 100 3,610 5000 0.50
ges remote message 73,089 52 3,609 49 50.27
dispatcher timer 66 88 3,608 54660 0.05
pmon timer 1,474 82 3,607 2447 1.01
PING 1,487 19 3,607 2426 1.02
Streams AQ: qmn slave idle wait 125 0 3,594 28754 0.09
Streams AQ: qmn coordinator idle wait 250 50 3,594 14377 0.17
smon timer 18 50 3,505 194740 0.01
JOX Jit Process Sleep 73 100 976 13370 0.05
class slave wait 56 0 605 10806 0.04
KSV master wait 2,215 98 1 0 1.52
SQL*Net message from client 109 0 0 2 0.07
PX Deq: Parse Reply 27 44 0 1 0.02
PX Deq: Join ACK 30 40 0 1 0.02
PX Deq: Execute Reply 20 30 0 0 0.01
Streams AQ: RAC qmn coordinator idle wait 259 100 0 0 0.18
Back to Wait Events Statistics
Back to Top
Wait Event Histogram
* Units for Total Waits column: K is 1000, M is 1000000, G is 1000000000
* % of Waits: value of .0 indicates value was <.05%; value of null is truly 0
* % of Waits: column heading of <=1s is truly <1024ms, >1s is truly >=1024ms
* Ordered by Event (idle events last)
% of Waits
Event Total Waits <1ms <2ms <4ms <8ms <16ms <32ms <=1s >1s
ADR block file read 13 100.0
ADR block file write 5 100.0
ADR file lock 6 100.0
ARCH wait for archivelog lock 3 100.0
ASM file metadata operation 3483 99.6 .1 .1 .2
CGS wait for IPC msg 32.7K 100.0
CSS initialization 12 50.0 50.0
CSS operation: action 21 28.6 9.5 61.9
CSS operation: query 36 86.1 5.6 8.3
DFS lock handle 6198 98.6 1.2 .1 .1
Disk file operations I/O 909 95.7 3.6 .7
IPC send completion sync 5469 99.9 .1 .0 .0
KJC: Wait for msg sends to complete 313 100.0
LGWR wait for redo copy 122 100.0
Log archive I/O 3 66.7 33.3
OJVM: Generic 36 55.6 44.4
PX Deq: Signal ACK EXT 72 98.6 1.4
PX Deq: Signal ACK RSG 2070 99.7 .0 .1 .0 .1
PX Deq: Slave Session Stats 2673 99.7 .2 .1 .0
PX Deq: reap credit 44.7K 100.0
SQL*Net break/reset to client 20 95.0 5.0
SQL*Net message to client 14.7K 100.0
SQL*Net more data from client 32 100.0
SQL*Net more data to client 689 100.0
asynch descriptor resize 3387 100.0
buffer busy waits 2 100.0
control file parallel write 2455 96.6 2.2 .6 .6 .1
control file sequential read 36K 99.4 .3 .1 .1 .1 .1 .0
db file parallel read 397 8.8 .8 5.5 12.6 17.4 46.3 8.6
db file parallel write 8233 85.4 10.3 2.3 1.4 .4 .1
db file scattered read 26.3K 79.2 1.5 8.2 10.5 .6 .1 .0
db file sequential read 28.4K 60.2 3.3 18.0 18.1 .3 .1 .0
db file single write 2 100.0
direct path read 2 50.0 50.0
direct path read temp 1722 95.8 2.8 .1 .5 .8 .1
direct path write 6 83.3 16.7
direct path write temp 4842 96.3 2.7 .5 .2 .0 .0 .2
enq: AF - task serialization 1 100.0
enq: CF - contention 145 99.3 .7
enq: CO - master slave det 1203 98.9 .8 .2
enq: CR - block range reuse ckpt 83 100.0
enq: DR - contention 2 100.0
enq: FB - contention 131 100.0
enq: HW - contention 97 100.0
enq: JQ - contention 19 89.5 10.5
enq: JS - job run lock - synchronize 3 100.0
enq: MD - contention 1 100.0
enq: MW - contention 2 100.0
enq: PS - contention 3207 99.5 .4 .1
enq: TA - contention 11 100.0
enq: TD - KTF dump entries 8 100.0
enq: TK - Auto Task Serialization 6 100.0
enq: TM - contention 58 100.0
enq: TO - contention 3 100.0
enq: TQ - DDL contention 1 100.0
enq: TS - contention 1 100.0
enq: UL - contention 1 100.0
enq: US - contention 7 100.0
enq: WF - contention 11 81.8 18.2
enq: WL - contention 2 50.0 50.0
gc buffer busy acquire 2 50.0 50.0
gc cr block 2-way 4934 99.9 .1 .0 .0
gc cr block busy 35 68.6 31.4
gc cr block congested 6 100.0
gc cr disk read 2 100.0
gc cr grant 2-way 4824 100.0 .0
gc cr grant congested 2 100.0
gc cr multi block request 37.1K 99.8 .2 .0 .0 .0 .0 .0
gc current block 2-way 2134 99.9 .0 .0
gc current block busy 7 14.3 14.3 14.3 28.6 28.6
gc current block congested 2 100.0
gc current grant 2-way 1337 99.9 .1
gc current grant busy 7123 99.2 .2 .2 .0 .0 .3 .1
gc current grant congested 2 100.0
gc current multi block request 1260 99.8 .2
gc object scan 28.8K 100.0
gcs log flush sync 65 95.4 3.1 1.5
ges LMON to get to FTDONE 3 100.0
ges generic event 1 100.0
ges inquiry response 2 100.0
ges lms sync during dynamic remastering and reconfig 24 16.7 29.2 54.2
ges message buffer allocation 63.1K 100.0
kfk: async disk IO 23.3K 100.0 .0 .0
kjbdrmcvtq lmon drm quiesce: ping completion 9 11.1 88.9
ksxr poll remote instances 19.1K 100.0
latch free 52 59.6 40.4
latch: call allocation 2 100.0
latch: gc element 1 100.0
latch: gcs resource hash 1 100.0
latch: ges resource hash list 135 100.0
latch: object queue header operation 5 40.0 40.0 20.0
latch: shared pool 5 40.0 20.0 20.0 20.0
library cache load lock 74 9.5 5.4 8.1 17.6 10.8 13.5 35.1
library cache lock 493 99.2 .4 .4
library cache pin 1186 98.4 .3 1.2 .1
library cache: mutex X 6 100.0
log file parallel write 3897 72.9 1.5 17.1 7.5 .6 .3 .1
log file sequential read 350 4.6 3.1 59.4 30.0 2.9
log file single write 6 100.0
log file switch completion 3 33.3 66.7
log file sync 385 90.4 3.6 4.7 .8 .5
name-service call wait 18 5.6 5.6 5.6 16.7 44.4 22.2
os thread startup 146 100.0
rdbms ipc reply 3763 99.7 .3
read by other session 2 50.0 50.0
reliable message 4565 99.7 .2 .0 .0 .1
row cache lock 2334 99.3 .2 .1 .1 .3
undo segment extension 8 50.0 37.5 12.5
utl_file I/O 11 100.0
ASM background timer 3343 57.0 .3 .1 .1 .1 21.1 21.4
DIAG idle wait 203.2K 3.4 .2 .4 18.0 41.4 14.8 21.8
JOX Jit Process Sleep 73 2.7 97.3
KSV master wait 2213 99.4 .1 .2 .3
PING 1487 81.0 19.0
PX Deq Credit: send blkd 7 57.1 14.3 14.3 14.3
PX Deq: Execute Reply 2966 59.8 .8 9.5 5.6 10.2 2.6 11.4
PX Deq: Execution Msg 10.6K 72.4 12.1 2.6 2.5 .1 5.6 4.6 .0
PX Deq: Join ACK 3006 77.9 22.1 .1
PX Deq: Parse Reply 3184 67.1 31.1 1.6 .2
PX Idle Wait 6466 .2 8.7 4.3 4.8 .3 .1 5.0 76.6
SQL*Net message from client 14.7K 72.4 2.8 .8 .5 .9 .4 2.8 19.3
Space Manager: slave idle wait 722 100.0
Streams AQ: RAC qmn coordinator idle wait 259 100.0
Streams AQ: qmn coordinator idle wait 250 50.0 50.0
Streams AQ: qmn slave idle wait 125 100.0
class slave wait 55 67.3 7.3 1.8 5.5 1.8 7.3 9.1
dispatcher timer 66 6.1 93.9
gcs remote message 218.6K 7.7 1.8 1.2 1.6 1.7 15.7 70.3
ges remote message 72.9K 29.7 5.1 2.7 2.2 1.5 4.0 54.7
heartbeat monitor sleep 722 100.0
jobq slave wait 7725 .1 .0 99.9
pmon timer 1474 18.4 81.6
rdbms ipc message 103.3K 20.7 2.7 1.5 1.3 .9 .7 40.7 31.6
shared server idle wait 121 100.0
smon timer 18 100.0
wait for unread message on broadcast channel 7238 .3 99.7
Back to Wait Events Statistics
Back to Top
Wait Event Histogram Detail (64 msec to 2 sec)
* Units for Total Waits column: K is 1000, M is 1000000, G is 1000000000
* Units for % of Total Waits: ms is milliseconds s is 1024 milliseconds (approximately 1 second)
* % of Total Waits: total waits for all wait classes, including Idle
* % of Total Waits: value of .0 indicates value was <.05%; value of null is truly 0
* Ordered by Event (only non-idle events are displayed)
% of Total Waits
Event Waits 64ms to 2s <32ms <64ms <1/8s <1/4s <1/2s <1s <2s >=2s
ASM file metadata operation 6 99.8 .1 .1
DFS lock handle 6 99.9 .1 .0
OJVM: Generic 16 55.6 2.8 41.7
PX Deq: Signal ACK RSG 3 99.9 .0 .1
PX Deq: Slave Session Stats 3 99.9 .0 .0 .0
SQL*Net break/reset to client 1 95.0 5.0
control file sequential read 1 100.0 .0
db file parallel read 34 91.4 8.6
db file scattered read 4 100.0 .0 .0
db file sequential read 6 100.0 .0 .0 .0
direct path write temp 11 99.8 .1 .1 .0
enq: WF - contention 2 81.8 18.2
gc cr block 2-way 1 100.0 .0
gc cr multi block request 1 100.0 .0
gc current block 2-way 1 100.0 .0
gc current block busy 2 71.4 28.6
gc current grant busy 8 99.9 .0 .1
ges lms sync during dynamic remastering and reconfig 13 45.8 20.8 33.3
kjbdrmcvtq lmon drm quiesce: ping completion 8 11.1 11.1 77.8
latch: shared pool 1 80.0 20.0
library cache load lock 26 64.9 14.9 12.2 4.1 4.1
log file parallel write 2 99.9 .0 .0
log file sequential read 10 97.1 2.0 .6 .3
log file switch completion 2 33.3 66.7
name-service call wait 4 77.8 22.2
os thread startup 146 100.0
reliable message 4 99.9 .0 .1
row cache lock 2 99.7 .0 .0 .3
Back to Wait Events Statistics
Back to Top
Wait Event Histogram Detail (4 sec to 2 min)
* Units for Total Waits column: K is 1000, M is 1000000, G is 1000000000
* Units for % of Total Waits: s is 1024 milliseconds (approximately 1 second) m is 64*1024 milliseconds (approximately 67 seconds or 1.1 minutes)
* % of Total Waits: total waits for all wait classes, including Idle
* % of Total Waits: value of .0 indicates value was <.05%; value of null is truly 0
* Ordered by Event (only non-idle events are displayed)
% of Total Waits
Event Waits 4s to 2m <2s <4s <8s <16s <32s < 1m < 2m >=2m
row cache lock 6 99.7 .3
Back to Wait Events Statistics
Back to Top
Wait Event Histogram Detail (4 min to 1 hr)
No data exists for this section of the report.
Back to Wait Events Statistics
Back to Top
Service Statistics
* ordered by DB Time
Service Name DB Time (s) DB CPU (s) Physical Reads (K) Logical Reads (K)
ubshost 1,934 1,744 445 73,633
SYS$USERS 105 45 1 404
SYS$BACKGROUND 0 0 1 128
ubshostXDB 0 0 0 0
Back to Wait Events Statistics
Back to Top
Service Wait Class Stats
* Wait Class info for services in the Service Statistics section.
* Total Waits and Time Waited displayed for the following wait classes: User I/O, Concurrency, Administrative, Network
* Time Waited (Wt Time) in seconds
Service Name User I/O Total Wts User I/O Wt Time Concurcy Total Wts Concurcy Wt Time Admin Total Wts Admin Wt Time Network Total Wts Network Wt Time
ubshost 60232 90 2644 4 0 0 13302 0
SYS$USERS 997 2 525 19 0 0 1973 0
SYS$BACKGROUND 1456 2 1258 14 0 0 0 0
I am not able to paste the whole awr report. I have paste some of the sections of awr report.
Please help.
Thanks and Regards, -
How do I set the orientation for a PDF document in Adobe X? Also if I set the orientation in Adobe X then does that mean the printer will automatically print it in either portrait or landscape or would that have to be configured on the printer?
Under Document (or TOOLS in AAX) you use Rotate Pages. When saved, the document should retain the rotation. As for the print, I think it will still print OK, but am not sure. Bottom line, just try it (that is exactly what I would do) on a page or two.
-
How to set the display ratio of master and detail view
Currently, I use SplitApp that contain the master and detail view. And I would like to show the master view on the left half and detail view on the right half. Is there any proper way to adjust this?
Thank you in advance.You can set the width ratio by adding css. Check this,
http://jsbin.com/dakir/1 -
Q: How to setting the Sun ONE Studio JDK and Class(and file) Path.
1.I'll use two JDK version.
2.I'll add the Oracle JDBC driver.
3.In my city, I'm didn't find the Sun ONE Studio book.(Forte for Java 4).
need help.
Thank you.Dear javaunter20000,
I'm used the Windows XP Professional(SP1),
I'm use the
Class.forName("oracle.jdbc.driver.OracleDriver").newInstance();
String url="jdbc:oracle:thin:@127.0.0.1:1521:netcob";
String user="***"; String password="***";
Connection conn= DriverManager.getConnection(url,user,password);
connect Orcale, compiler return:
***[34:1] unreported exception java.lang.ClassNotFoundException; must be caught or declared to be thrown
Class.forName("oracle.jdbc.driver.OracleDriver").newInstance();
^
***[34:1] unreported exception java.lang.InstantiationException; must be caught or declared to be thrown
Class.forName("oracle.jdbc.driver.OracleDriver").newInstance();
^ -
How to set the lifetime properties of a document
Hi Experts,
Do somebody know how to set the lifetime attributes "valid from" and "valid to" via java of the lifetime properties?
Which java class should I use?
Do somebody have an example for this issue maybe?
Thanks in advanced!
Best Regards,
MarkusHi Markus,
Below is a sample method which i am using for setting expiry date for a KM Doc...
public void setTimeBasedPublish(IResource resource) throws WcmException {
IRepositoryServiceFactory repServiceFactory =
ResourceFactory.getInstance().getServiceFactory();
IRepositoryService repositoryService =
repServiceFactory.getRepositoryService(
resource,
IWcmConst.TIMEBASED_PUBLISH_SERVICE);
ITimebasedPublishServiceManager tpbService =
(ITimebasedPublishServiceManager) repositoryService;
java.util.Date startDate = new java.util.Date();
java.util.Date endDate = new java.util.Date();
endDate.setMinutes(
startDate.getMinutes()
+ Integer
.valueOf(getproperty("LIFETIME_MINUTES_FOR_LATEST_REPORTS"))
.intValue());
endDate.setDate(
startDate.getDate()
+ Integer
.valueOf(getproperty("LIFETIME_DAYS_FOR_LATEST_REPORTS"))
.intValue());
tpbService.saveValidDate(resource, startDate);
tpbService.saveInvalidDate(resource, endDate);
Regards
BP -
I purchased my imac in the United States and now I live in the United Kingdom. How do I set the computer to know where we live as it defaults to US settings and I am having trouble registering my iphone. I had used it in the US for two years.
You're Welcome..
See Here for
Changing Account Information
http://support.apple.com/kb/HT1918
Changing iTunes Store Account
http://support.apple.com/kb/HT1311
Apple ID FAQ
http://support.apple.com/kb/HE37 -
hi, i purchased a 2 dvd digital set. i cant just download it straight to my ipad. they said i have to down load it to my i tunes, then can transfer to i pad. im not seeing how to click the files from my email, and get them into the i tunes acct... ugh.
i do not have a mac home pc. just a regular pcI had the same problem after I gave my old iPad to my parents and tried to install Netflix. This is what you have to do: Open iTunes on your computer, the one you sync your iPad to. Then go to iTunes Store and search for and download Netflix app. After you download it, if your iPad is set to download new purchases it may start downloading on your iPad. If so, tap and hold to delete the app (because it is trying to install the new version on the iPad) Next step, go to the App Store on your iPad and find Netflix and it should say install since you already purchased it on the computer. Tap to install, and it will say the version is not compatible, tap to download a previous version. Click that and it will install the older version! One more thing, if and when you sync to your computer again it will say something like " Unable to install Netflix on your iPad" Just click the box to never remind you again, because it's trying to sync the newer Netflix app to your iPad, but it doesn't work so it displays the message. The old app will remain on the ipad. Hope this helps, good luck
-
How to set the oracle oci8 driver?
hello all:
I've set up the oracle thin driver and it works. but when I change to
oci8.it don't work
below is config and errors:
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="5" LoginDelaySeconds="5" MaxCapacity="15"
Name="ocipool"
Properties="user=yanji;password=yanji"
Targets="myserver" URL="jdbc:oracle:oci8:@pg01"/>
Could not load 'oracle.jdbc.driver.OracleDriver
If this is a type-4 JDBC driver, it could occur if the JDBC
driver is not in the system CLASSPATH.
If this is a type-2 JDBC driver, it may also indicate that
the Driver native layers(DBMS client lib or driver DLL)
have not been installed properly on your system
or in your PATH environment variable.
This is most likely caused by one of the following:
1. The native layer SO, SL, or DLL could not be found.
2. The file permissions on the native layer SO, SL, or DLL
have not been set properly.
3. The native layer SO, SL, or DLL exists, but is either
invalid or corrupted.
For more information, read the installation documentation
for your JDBC Driver, available from:
http://e-docs.bea.com
at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection
ectionEnvFactory.java:208)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource
ectionEnvFactory.java:131)
at weblogic.common.internal.ResourceAllocator.makeResources(Resource
ator.java:698)
at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocat
va:282)
best regardsHello, Jenny I am glad you found your resolution. I too am having problems isung
the oracle 0CI8 driver. My connection pool is creating fine, but my server is
crashing with JVM errors.
Here are my configurations.
DBase=Oracle 8.1.7,OS=Win2000, running 6.1 with Portal 4.0
pool config =
<JDBCConnectionPool CapacityIncrement="0"
DriverName="oracle.jdbc.driver.OracleDriver" InitialCapacity="5"
MaxCapacity="5" Name="ccConPool"
Properties="jdbc.url=jdbc:oracle:oci8:@servername:1521:orcl;user=XXXXX;password=XXXXXX;dll=ocijdbc8;server=orcl;protocol=oci8;dll=ocijdbc8;protocol=oci8"
RefreshMinutes="0" Targets="portalServer"
TestTableName="WIP_TABLE" URL="jdbc:oracle:oci8:@servername"/>
My classpath sets my classes12.zip file first. My path sets %WEBLOGIC_HOME%\bin\oci817_8
and %WLCS_ORACLE_HOME%\bin.
Am I setting the right dll and protocol in my .dll? Where can I find documentation
on these properties definitions?
"jenny" <[email protected]> wrote:
hello all:
I've got the answer. those all because weblogic.jar. this jar include
the
class "oracle.jdbc.driver.OracleDriver".
although I put the classes12.zip into the CLASSPATH.but the weblogic.jar
in
front of classes12.zip.so classloader
load the class from weblogic.jar. so I can use thin driver(weblogic
implements this function with class,but not for oci8 )
..this is really a big pitfall !
put the classes12.zip in front of weblogic.jar .all perfect!
"jenny" <[email protected]> wrote in message
news:[email protected]...
hello all:
below is some chapters of my config.xml and startWeblogic.cmd
the oci8 :
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="5" LoginDelaySeconds="5" MaxCapacity="15"
Name="ocipool" Password="{3DES}J3XuQd6cvvw="
Properties="user=yanji;password=yanji;dll=ocijdbc8;protocol=oci8"
Targets="myserver" TestTableName="test"
URL="jdbc:oracle:oci8:@pg01"/>
the thin :
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="5" LoginDelaySeconds="5" MaxCapacity="15"
Name="citcpool" Password="{3DES}J3XuQd6cvvw="
Properties="user=yanji;password=yanji"
SupportsLocalTransaction="true" Targets="myserver"
URL="jdbc:oracle:thin:@sune250:1521:pg01"/>
:runWebLogic
echo on
set ORACLE_HOME=e:\oracle
set PATH=./bin;%ORACLE_HOME%\bin;%ORACLE_HOME%\lib;%PATH%
set
CLASSPATH=.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar;.\lib\dom.jar;.\lib\xml
4j.jar;.\lib\jecf.jar;%ORACLE_HOME%\jdbc\lib\classes12.zip
echo off
the thin driver is ok,but the oci driver can not work!
if I've set the wrong CLASSPATH or PATH , the thin driver and oci8driver
must have not worked. I confused!
"Sree Bodapati" <[email protected]> wrote in message
news:[email protected]...
"Sree Bodapati" <[email protected]> wrote in message
news:[email protected]...
Its not CLASS_PATH it should be CLASSPATH.
when you say oracle\bin and oracle\lib , on what driver is the oracle
folder?I meant to say 'on what drive' not 'on what driver'
you have to specify the full path.
post your startup script here.
sree
"jenny" <[email protected]> wrote in message
news:[email protected]...
hello all:
I've set the ORACLE_HOME,and CLASS_PATH,but nothing changed. I will
go
to
crazy!!!
when startup the weblogic,I've seen the oracle\bin and oracle\libin th
"path" and classes12.zip in the CLASS_PATH.but the errors stillappears!!
"Sree Bodapati" <[email protected]> wrote in message
news:[email protected]...
1. Dont copy this file oci8jdbc.dll, to bin folder. Make sure
you
place
<oracle_home>\lib in your PATH before starting the server. Make
sure
your
ORACLE_HOME environment varable is set to <oracle_home> folder.
eg. set ORACLE_HOME=c:\ora816 before starting the server.
so you must have done something like
set ORACLE_HOME=c:\ora816
set PATH=%ORACLE_HOME%\bin;%ORACLE_HOME%\lib;%PATH%
2. double check if you set your CLASSPATH something like this,
CLASSPATH=%ORACLE_HOME%\jdbc\lib\classes12.zip;%CLASSPATH%
in the server startup script just before starting the server.
3. start the server the connection pool should work.
hth
sree
"jenny" <[email protected]> wrote in message
news:[email protected]...
hello All:
I've edited the StartWeblogic.cmd, set the classes.zip into CLASSPATH,and
copied the oci8jdbc.dll to the bea\wlserver6.1\bin. errors stillappears!
my weblogic version is 6.1 and oracle is 8.1.6 .
why the thin driver is ok but the oci driver can not work?
I logined in the oracle website and look for the jdbc.but I find
that
jdbc
all provide for jdk1.2 or jdk1.1. because the weblogic6.1 based
jdk1.3.
I
think i can not use those drivers.
I think my oracle driver is ok,because i installed the jboss and
bas4.5
in
my computer. they all can use oci8 driver properly.and they all
based
jdk1.3.
by the way. I 've tryed added the oracle\bin path inStartWeblogic.cmd,
nothing changed !
again below is my config : I want to know whether my config right?
(the property DLL and Protocal auto added by the weblogic)
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="5" LoginDelaySeconds="5" MaxCapacity="15"
Name="ocipool"
Properties="user=yanji;password=yanji;dll=ocijdbc8;protocol=oci8"
Targets="myserver" URL="jdbc:oracle:oci8:@pg01"/>
best regards
----- Original Message -----
From: "Mitesh Patel" <[email protected]>
Newsgroups: weblogic.developer.interest.jdbc
Sent: Thursday, December 13, 2001 4:00 AM
Subject: Re: how to set the oracle oci8 driver?
To use oracle oci8 driver:
You should have classes12.zip in weblogic classpath.
You should have ocijdbc8.dll in your weblogic path..
You can download ocijdbc8.dll from oracle website.
Mitesh Patel
jenny wrote:
hello all:
I've set up the oracle thin driver and it works. but when I
change
to
oci8.it don't work
below is config and errors:
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="5" LoginDelaySeconds="5" MaxCapacity="15"
Name="ocipool"
Properties="user=yanji;password=yanji"
Targets="myserver" URL="jdbc:oracle:oci8:@pg01"/>
Could not load 'oracle.jdbc.driver.OracleDriver
If this is a type-4 JDBC driver, it could occur if the JDBC
driver is not in the system CLASSPATH.
If this is a type-2 JDBC driver, it may also indicate that
the Driver native layers(DBMS client lib or driver DLL)
have not been installed properly on your system
or in your PATH environment variable.
This is most likely caused by one of the following:
1. The native layer SO, SL, or DLL could not be found.
2. The file permissions on the native layer SO, SL, or DLL
have not been set properly.
3. The native layer SO, SL, or DLL exists, but is either
invalid or corrupted.
For more information, read the installation documentation
for your JDBC Driver, available from:
http://e-docs.bea.com
atweblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection
ectionEnvFactory.java:208)
atweblogic.jdbc.common.internal.ConnectionEnvFactory.createResource
ectionEnvFactory.java:131)
atweblogic.common.internal.ResourceAllocator.makeResources(Resource
ator.java:698)
atweblogic.common.internal.ResourceAllocator.<init>(ResourceAllocat
va:282)
best regards
"jenny" <[email protected]> wrote in message
news:[email protected]...
hello all:
I've set up the oracle thin driver and it works. but when I change
to
oci8.it don't work
below is config and errors:
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="5" LoginDelaySeconds="5" MaxCapacity="15"
Name="ocipool"
Properties="user=yanji;password=yanji"
Targets="myserver" URL="jdbc:oracle:oci8:@pg01"/>
Could not load 'oracle.jdbc.driver.OracleDriver
If this is a type-4 JDBC driver, it could occur if the JDBC
driver is not in the system CLASSPATH.
If this is a type-2 JDBC driver, it may also indicate that
the Driver native layers(DBMS client lib or driver DLL)
have not been installed properly on your system
or in your PATH environment variable.
This is most likely caused by one of the following:
1. The native layer SO, SL, or DLL could not be found.
2. The file permissions on the native layer SO, SL, or DLL
have not been set properly.
3. The native layer SO, SL, or DLL exists, but is either
invalid or corrupted.
For more information, read the installation documentation
for your JDBC Driver, available from:
http://e-docs.bea.com
atweblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection
ectionEnvFactory.java:208)
atweblogic.jdbc.common.internal.ConnectionEnvFactory.createResource
ectionEnvFactory.java:131)
atweblogic.common.internal.ResourceAllocator.makeResources(Resource
ator.java:698)
atweblogic.common.internal.ResourceAllocator.<init>(ResourceAllocat
va:282)
best regards -
Start page lacks menu items - unlike "How to set the home page" view
I have just downloaded the beta of Firefox 4 and am attempting to reproduce opening home page from previous version. Directions on accomplishing this (loading the NY Times front page) depend on a menu bar with "File, Edit, View, History" etc. There are not visible. They are shown in the directions on Firefox Help but not on my computer. How to do this??
Click the Firefox button, then click Options. This will open the options dialog that the [[How to set the home page]] article refers to.
When viewing the support articles, in the right-hand column there is a section titled "Help With:", make sure it is set to Windows and Firefox 4 to get help relevant to the version you are using. In some articles you get different content when you select Firefox 4. -
How to set the router and play the Command & Conquer using direct IP mode?
My router is WRT54GFirmware Version: v3.03.1
How to set the router and play the Command & Conquer using direct IP mode with other computer?Hi, when you say direct IP mode, what do you mean ? do you wanna play the game online or on the LAN ??
can you give a few more details. -
How to set the table input in Query template?
Hi all.
I need to call a Bapi_objcl_change, with import parameter and a table as an input. I have done this, in BLS. I have set the table input in the
form of xml. In BLS, I get the output(the value gets change in SAP R3, what i have given in BLS). But if i set the same xml structure in
query template, I didn't get the output. Table input parameter does not take that xml source. How to set the table input in Query template?
can anyone help me?
Regards,
HemalathaHema,
You probably need to XML encode the data so that it will pass properly and then xmldecode() it to set the BAPI input value.
Sam -
How to set the table I_ORG in 'BBP_EXTREQ_INBOUND'?
dear all,
Now I am using BAPI 'BBP_EXTREQ_INBOUND' to create a shopping card and have successed.
but in the table I_ORG, whatever I set the value of organization ID and group ID, it will not be changed in the SRM.
how can I set them?
t hank you!hi ,
you can use BADI --> BBP_PGRP_ASSIGN_BADI in your SRM system and make changes according to your own requirements.
if you make changes using the above BADI --> then changes should be updated in the newly created shopping cart.
this is because , the above BADI is called ---> in the
BAPI 'BBP_EXTREQ_INBOUND' .
check out the following sequence --->
BBP_EXTREQ_INBOUND ---> calls
FM BAPI_SCEC_CREATE ---> calls
{BAdI - BBP_PGRP_ASSIGN_BADI -
PERFORM sc_pgrp_assign_badi TABLES lt_i_items "XMZSP02AO
lt_i_account "XMZSP02AO
lt_i_partner "XMZSP02AO
USING ls_i_header "XMZSP02AO
CHANGING lt_i_orgdata[] "XMZSP02AO
return[]. "XMZSP02AO -
How to get the values from table region and how to set
Hi,
I have a requirement as Seeded Page Having One Table Region having around 8 columns, In That Item Description field is there. My Requirement is I need add one more field for that Region and assign the value depending Item Description.
I will create one new Item in that region and will give name as Item, But how to set the values to Item Depending on Item Description.
Is it possible to through CO Extension, If yes..Pls help how to get it.
Thanks in Advance,
HanimiHi Hanimi,
1. You need to extend the VO, add a new Attribute.
2. In VORowImpl of the extended VO, you can find the getter for your new attribute (example getItem())
3. In this getter method you can write some code like:
if("ABC".equals(getItemDescription())
return "XYZ" ;
-Prince
http://princekapoor82.blogspot.com -
SRM 4.0- How to set the default values for product type (01) only for SC
The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF
Maybe you are looking for
-
Oracle 10gR2 WebService Call-In & Call-Out via PL/SQL (Step-by-Step Guide)
Hi Everyone, This guide is for those of you who tried to Call-In and Call-Out WebService via Oracle 10gR2 using PL/SQL but failed a couple of times, re-installed a couple of times and retry, got it to work but don't know what made it work scenarios.
-
I've been able to increase the size of other toolbars through but not the favorites toolbar.
-
Crosstab report with XML Publisher without aggreate function
Hi Gurus, I have query that returning the task schedule of the man power as below Source Date Week Day Customer Activity Service Pat 16-Oct-14 42 T C1 A1 S1 Pat 17-Oct-14 42 F C1 A1 S1 Pat 18-Oct-14 42 S Pat 19-
-
Cannot Print after upgrading to Mountain Lion
I can not longer print since upgrading to Mountain Lion 10.8.2. Prior to the upgrade I was printing; now, even though my printer is on the list (HP Officejet 7410xi, All-in-one) as being compatible, I still get "Power PC applications are not longer
-
Playlists made on Ipod touch wont sync with itunes and vise versa.
When I make a playlist on my Ipod touch it wont sync up with my itunes on my computer. I