How to set the date and time format from Windows Server 2008 R2

Hi,
I want to control my client's date and time format as dd/mm/yyyy format and I need to do it using the windows server 2008 R2. How can I achieve this goal?
Yoshika04

Hi,
In Windows Server 2008 R2, you can use Regional Options Extension in Group Policy Preferences to configure the date and
time format. For more information, please refer to:
Regional Options Extension
http://technet.microsoft.com/en-us/library/cc754496.aspx
Regards,
Bruce

Similar Messages

  • How to set the Date and Currency Formats Based on Country

    Hi Friends,
    I am designing the one Global Form it will use for all countries.
    in that Form i want to print the date and currnecy Formats based on country.
    Like
    For US i want print the date and Currency Like This.
    Date -  MM/DD/YYYY
    Curremcy - XX,XXX,XX.XX
    For DE i want print the date and Currency Like This.
    Date -  DD.MM.YYYY
    Curremcy - XX.XXX.XX,XX
    Please suggest how i can control these things through Java Script or Formcalc....

    Hi Nitin,
    thanks For ur reply,
    i tried with this solution,
    But it is displaying the default Format like bellow formats.
    For short - mm/dd/yy
    For Medium - mmm dd , yyyy
    For Long     - thursday ,mmm dd , yyyy
    it was prinitng in above mentioned format,
    but here i want to print my own format for USA like MM/DD/YYYY.

  • How to delete the date and time column from a waveform spreasheet file

    after acquiring a signal through the DAQ i am writing it in a spreadsheet. but for further post processing of the data the date and the time column are unneccessary. is there some way to format the file in labview so that those columns are removed. the DAQmx read  gives as output a 1 d array. so i could not find a way to select only the Y column

    If you are getting a 1D array from the DAQmx Read, then you don't have any date/time information to write and if you are using the Write to Spreadsheet File, there should be no way you can have the date/time information in the file. Whatever you hjave programed to put the date/time into the file, don't do it.
    p.s. You may not think you need timing information but for a lot of post-processing, it is essential to have. If it's in the file, you can always ignore when you read it and if you later find out it's necessary, it will already be there.

  • Set the date and time

    how to set the date and time in apple tv?

    Welcome to the Apple Community.
    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
    If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • I just bought my apple tv and it says that it can't set the date and time? How do i fix this?

    I just bought my apple tv and it says that it can't set the date and time? How do i fix this?

    Welcome to the Apple Community.
    A number of users have encountered this problem, for existing users the problem has largely been resolved by restarting the Apple TV. However since you are a new user it would be wise to check that your settings are correct to begin with. Ensure the router allows access over port 123 (TCP) and that you are using the DNS settings provided by the ISP and not your own.

  • How do you change the date and time format in Pages

    I've tried changing the date and time format a number of times for Pages but it does not change.  I'm going to the System Preferences/Language and Text and Formats.  I make the changes click on OK and go back to Pages.  NO change.

    Hi Uncle,
    Page 116 of the Pages'09 User Guide: Control Click the date, Edit Date and Time.
    Date and time can also be in a table. Format the table cell.
    The User Guide is well worth a read. Download it from the Help menu in Pages.
    Regards,
    Ian.

  • HOW DO I SET THE DATE AND TIME ON MY HP OFFICEJET 8600

    just bought the HP officejet 8600 all in one printer, and I cant seem to set the date and time for the fax portion of the printer, please help.

    Set the date and timeOn the control panel, touch the Right Arrow ( ), and then touch Setup ( ).Touch the Down Arrow ( ), and then touch Preferences .Touch Date and Time: , and then touch the Up and Down Arrows ( ) to set the month, day, and year.Touch Done , and then touch the Return Arrow ( ) to return to the Preferences menu.Set the language and country/regionIn the Preferences menu, touch Language .Touch your preferred language, and then touch Yes to confirm your choice. The product returns to the Preferences menu.On the Preferences menu, touch Country/Region , and then touch your specific country/region.Touch Yes to confirm your choice, and then touch the Home icon ( ) to return to the main menu.

  • How do you edit out the date and time stamp from a photo

    How do you edit out the date and time stamp from a photo

    You can blur it out with retouch
    The built-in "Retouch" brush in "Edit" mode should suffice, if the background is mostly uniform, and if you set the size of the brush to slightly wider than the bar width of the letters. For example, in this picture I removed the year from the date (in the lower right corner) by using the "retouch" brush and following the contours of the letters. (the screen shot is from iPhoto '11, but iPhoto 9 should give similar results).
    Regards
    Léonie

  • Camileo S20 - How to display the date and time

    Hi, to all. I have got as Christmas present the Camileo S20 and I am not able to display the date and time at video. In manual is no mention about this, just how to set the correct date and time. But what is intention of setting the date and time into camera, if it is not possible to display them on video ?

    Hi,
    of course, I did it repeatly, it is written in my question above. I am not stupid.
    This question is aimed to owners of camera Camileo S20 and also Camileo S10 - Camileo S20 is derived of Camileo S10, may be any of them discovered the way how to get the date and time into video.

  • How to read the date and time information of a file by labview

    how to read the date and time information of a file by labview? for example, created time and modified time.
    Solved!
    Go to Solution.

    if you need to know the last modification date of file:-
    "Functions->File I/O->Advanced File Functions->File/Directory Info.vi"
    This vi returns the value of file's last modification date. This is returned as U32 number. To see it in MM/DD/YY format you must create the indicator, right-click on it and select "Format & Precision" item from drop-down menu. Then select "Time and Date" format there.
    Thanks as kudos only

  • HT1551 Is setting the date and time a one-time process?

    Is setting the date and time a one-time process?

    What exactly do you mean? You don't know how to set the time? You set the time but something changes it?

  • On the initial set up for apple tv it just sits there trying to set the date and time . it is a wireless setup and the ipaddress and router address is correct . I can't get by this screen

    On the initial set up for apple tv it just sits there trying to set the date and time . it is a wireless setup and the ipaddress and router address is correct . I can't get by this screen. The setting is on automatic and I have picked a city in my time zone yet it still tries to set a time and date but fails.
    thanks

    Make sure router is up to date. Try ethernet to rule out any wifi issues. Reboot ATV and router.

  • How to find the Date and Time of Modification of Column in aTable?

    Hi all,
    Do  you know how to find the Date and Time of Addition of Column to a Particular Table?.
    I know however, How to find the modification time of the Table. Using the below Query :
    Select Object_Name, to_Char(Last_DDL_TIME, 'DD-Mon-YYYY HH24:MI:SS') Last_DDL from User_Objects where Object_Type = 'TABLE';
    Object_Name
    Last_DDL
    Employee
    20-Aug-2013 09:23:03
    I wanted to know the Creation or Modification Date and Timestamp of all columns of Employee Table?. Is it possible at all. If possible, How to get it?.
    Regards,
    Bhaskar M

    I agree with you on that. Since its a development enviornment I can remove the column but that not my point here.
    My whole purpose it to know whether we get the Column's Creation or Modification DateTime.

  • How to capture the date and time of  a background job

    Hi experts,
    How to capture the date and time of  a background job?
    How to find whether it is runned succesfully or not?
    If it is not successful how to put error message?
    ASAP
    Thanx in advance,
    Sudha

    To Display the STATUS of the JOB which is exectued in background
      CLEAR : wa_jobsteplist.
      REFRESH : i_jobsteplist.
      WRITE:/ 'DISPLAYING JOB STATUS'.
      CALL FUNCTION 'BP_JOB_READ'
        EXPORTING
          job_read_jobcount           = w_jobcount
          job_read_jobname            = w_jobname
          job_read_opcode             = '20'
        JOB_STEP_NUMBER             =
       IMPORTING
         job_read_jobhead            = wa_jobhead
       TABLES
         job_read_steplist           = i_jobsteplist
    CHANGING
       RET                         =
       EXCEPTIONS
         invalid_opcode              = 1
         job_doesnt_exist            = 2
         job_doesnt_have_steps       = 3
         OTHERS                      = 4
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    To Display the status text as per the status type
      CASE wa_jobhead-status.
        WHEN 'S'. WRITE: / 'Scheduled'.
        WHEN 'R'. WRITE: / 'Released'.
        WHEN 'F'. WRITE: / 'Completed'.
        WHEN 'A'. WRITE: / 'Cancelled'.
        WHEN OTHERS.
      ENDCASE.

  • Setting the date and time on my Verve 450 answerin...

    I have set the time and date on all the handsets, but when we pick up a voicemail, the date and time on the message bears no relation to reality!  The instructions do not provide any advice on setting the date and time on the answering machine.

    Well after i change it it seems fine, but when i use it another time it has been changed.

Maybe you are looking for