How to set the decimal point to 0

heres the problem
i have a double variable which is equal to 0
when i do calculation like :
variable=0*0;
then the result will be 0.0
when printed
how to fix this??

Tech tip article on formatting decimal numbers:
http://java.sun.com/developer/TechTips/2000/tt0411.html#tip1
JavaDoc on the java.text.DecimalFormat class:
http://java.sun.com/javase/6/docs/api/java/text/DecimalFormat.html
Java Tutorial on number formatting:
http://java.sun.com/docs/books/tutorial/i18n/format/decimalFormat.html

Similar Messages

How to set the out point beyond 9.95 seconds???

how to set the out point in Motion 5 beyond 9.95 seconds???

First you need to make sure your project is long enough then you can adjust the play range (in/out). To make sure the project is long enough:
1. From the project properties (command-J) go to the Duration field and enter a new duration.
2. Click on the down arrow icon to the right of the current time, there is an option to show the project duration. Once set to this you can double click the number and type in a new project duration. I'd recommend setting it back to show current time when done.
3. Of course you can also change the duration of a project when it is first created, in the project browser.
Once you're sure you have a long enough project you can adjust the in and out range. You then use the zoom controls in the bottom of the timeline to show more of the timeline and adjust the play range as needed. There's lots more about project and play range duration adjustments in the documentation: http://help.apple.com/motion/mac/5.1/

Without to change the setting.how to set the decimal place to 7 for an UDF.

Without to change the setting, how to set the decimal place to 7 for an UDF?

Hi
Once you create a UDF it will automatically be binded to the data source of data type that you gave at the time of creating UDF.
So i think you can not set the decimal places without changing the setting in display parameters.
i am not sure whether it will work or not one thing you can try is that create it as a alphanumeric data type and convert your decimal value to sting and then assign it to UDF,While retrieving for any manipulation you convert it as decimal.
Hope it helps you
Regards
Vishnu

Can't figure out how to solve the decimal point bug in this calculator code

Hi guys, I'm new in flash and is currently learning how to build a simple calculator with multipliers (plus,minus,multiple,divide,decimal point and change sign) but I'm stuck on the decimal point and change sign.
var multiplier_old:Number = 10;
var multiplier_new:Number = 1;
// .: Sets the multipliers so that new input numbers become decimals of a lower unit column
action_point.addEventListener(MouseEvent.MOUSE_DOWN, function():void {
          multiplier_old = 1;
          multiplier_new = 0.1;
          point = true;
// Takes intput from the input_ buttons and adds it to the input after applying the multipliers.
// If `point` is true then the multiplier_new is divided by 10, also as described.
function inputNumber(n:Number):void {
          input = input * multiplier_old + n * multiplier_new;
                    if (point) {
                                    multiplier_new *= 0.1;
                   trace(multiplier_new);
          output_txt.text = input.toString();
Decimal point
The problem is that when I input 2.7 in the calculator, it will display the values in output_txt correctly. But then when I input 2.78, it will display 2.780000000000000000000000002. This will also happen to other numbers if the input is too big.
What I want is just 2.78. How do I change the codings to make 2.780000000000000000000000002 become 2.78?
Change sign
Any tips on how to start on this one?
Thanks for your time,
Zainu

I think you misunderstand what I mean. The weird decimal doesnt comes out after I press the 'equals' sign. It comes out when im just pressing on the caculator number buttons
First I click the no.2 button and then the decimal point button.
So the caculation output display will show
2.
after that I press the no.7 button
2.7
and then no.8 button. It appears like
2.7800000000000000002
This is the code I use when the user press the decimal point button.
// .: Sets the multipliers so that new input numbers become decimals of a lower unit column
action_point.addEventListener(MouseEvent.MOUSE_DOWN, function():void {
          multiplier_old = 1;
          multiplier_new = 0.1;
          point = true;
// Takes intput from the input_ buttons and adds it to the input after applying the multipliers in the method described above.
// If `point` is true then the multiplier_new is divided by 10, also as described.
function inputNumber(n:Number):void {
          input = input * multiplier_old + n * multiplier_new;
                    if (point) {
                             trace(multiplier_new.toFixed(3));
                              multiplier_new *= 0.1;
                              //trace(multiplier_new);
          output_txt.text = input.toString();
I think there is some code wrong in this function that makes this weird problem. I tried putting toFixed method but it's still not working.
Sorry for this long reply but I have to try my bestto explain with my bad english.

How to remove the decimal points at the end of the value????

hi,
we are using crystal reports 9.0. we have some reports which contains group by field. we have one field like address. if we select group by as address "The data is displayed grouped by the Address. But the address is shown in decimal points". for example if we have 55 as address field value, it shows 55.00.
the formula has written like as follows
if lowercase({?GroupBy}) = 'Address' then totext({rsp_GetDevMicro.Address})
now, i want to remove zeros which comes along with address field values.
can anyone help me in this?

Not sure about Crystal 9 but on 11 I would convert it to a number to remove the leading zeroes then back to text again which allows you to remove the decimal point and any thousand seperators, ie:
CStr(ToNumber(),0,"")

HOW to remove the decimal points for particaular field

hi friends,
Iam printing the quntity in decimal mode like 2.000.
but i want to print this as only 2.
How can i remove the the decimal in smart form..
Iam printing amount as 1234.00000.
But i have to print two zeros after decimal point..how can i remove zeros .
appricioate for u r answers..
regards,
sampath kumar

You may use the option
field(.0) for printing the quantity
field(.2) for printing the amount..
Go through SAP help given below..
<b>Number of Decimal Places
A program symbol of one of the data types DEC, QUAN, and FLTP can contain decimal place data. Use the option below to override the Dictionary definition for the number of decimal places for the formatting of this symbol value.
Syntax
&symbol(.N)&
The EKPO-MENGE field contains the value 1234.56. The Dictionary definition specifies 3 decimal places and an output length of 17.
&EKPO-MENGE& -> 1,234.560
&EKPO-MENGE(.1) -> 1,234.6
&EKPO-MENGE&(.4) -> 1,234.5600
&EKPO-MENGE&(.0) -> 1,235</b>

How to resolve the decimal point issue??

hello friends,
I had declared a variable of variable type P(16) decimals 6 for price. The price is calculated accurately and stored in the variable. The value that got stored is 5094390.000000. I declared one more variable of type ekpo-netpr and moved that value into this field. In the fieldcatalog i used cfieldname = 'waers'.....while displaying through ALV for waers 'IDR' (no decimals should be displayed ) it is displaying as 509.439.000 instead of 5094390.
Could you tell me any one dd variable that can hold of type P(16) decimals 6 .
pls help me to resolve this issue. All helpful answers would be highly rewarded.
Thanks,
Ramineni

Hi Ramineni,
Check this..
WA_FCAT-TABNAME = 'I_OUTTAB'.
WA_FCAT-FIELDNAME = 'AUFNR'.
WA_FCAT-REF_TABNAME = 'AUFK'.
WA_FCAT-HOTSPOT = 'X'.
APPEND WA_FCAT TO I_FCAT.
WA_FCAT-TABNAME = 'I_OUTTAB'.
WA_FCAT-FIELDNAME = 'ACTL'.
WA_FCAT-SELTEXT_M = 'Total Act Amount'(010).
WA_FCAT-QFIELDNAME = 'TWAER'.
WA_FCAT-QTABNAME = 'T_OUTTAB'.
wa_fcat-decimals_o = '0'.
APPEND WA_FCAT TO I_FCAT.
CLEAR WA_FCAT.
<b>Decimals in this will be restricted</b>
Regards,
Omkar.

How do you set the decimal precision of a float?

Hello,
I am new to Java and have run into a problem. I am trying to truncate an array of floats and save them to a file. I want to save two decimal places with 0's ie: 0 as 0.00
For example:
I have a number 0.9772128 and I want to convert it and store it as 0.98, the following code seems to truncate it but there is a problem.
float d = output_Weights;
d = Math.round(d * 100) / 100.0;
some of my numbers come out as .1 instead of .10 and I can't seem to figure out how to add the 0's on the end of them.
Does anyone have any suggestions or a better way of getting the two decimal precision?
Thanks in advance for any help you might be able to offer.

And if you want to set the decimal precision when you convert the floating point number to text (which is what you are talking about when you say it ends with .1 instead of .10), you use a DecimalFormat object to do that.
(By the way, isn't there supposed to be an apostrophe in Arc'teryx?)

How to cut the zeros after the decimal point ?

Hello everybody,
does anyone know a solution how to cut the zeros after the decimal point at at CHAR data field?
For example the field
&RM06P-PRMG1&
This is a char field in the database, so that the command
&RM06P-PRMG1(.0C)&
doesn't work.
At the moment the output on the form is like that
124,000
It shoud be like that
124
It would be great if anyone could help me!
TIA!
Strobbel

Hi Strobbel,
If you are working on standard sapscript, first make a zcopy of it, do the modifications in that and assign the new form to the output types in tcode NACE.
First you need to create a program to write the logic, so go to tcode SE38 , create a new program (say zremove_zero) with Program type Executable.
Now you will see ABAP Editor with statement;
Report zremove_zero.
Add the following lines below the report statement.
*&      Form remove_zero
*       text
*      <--lv_AMT text
FORM remove_zero CHANGING lv_amt.
DATA p_amt TYPE p.
MOVE lv_amt TO p_amt.
MOVE p_amt TO lv_amt.
Condense lv_amt.
ENDFORM.
Now save and activate the program.
Now open the zcopy of your script and Just above the statement &RM06P-PRMG1& write the following lines;
/: perform remove_zero in program zremove_zero
/: changing &RM06P-PRMG1&
/: endperform.
Now you can see your amount printing without decimals.
Try and let me know, hope i have guided you clearly.
Regards
Karthik D
P.S.: I advice you to take help from an ABAPER.

How do you set the in point of a clip?

I'm using the timeline template that has a number of clips flying by and I need to adjust the in point of the clips. To be clear, I'm NOT trying to adjust the point that the clip appears in the timeline but instead the portion of the clip that will be displayed as it fly's by within the Motion timeline.

All that that seems to do is set the in point of the clip on the Motion timeline. Again, what I am attempting to do is change what is seen on the particular clip that has been dropped into this template. Where the inset clip window appears on the timeline is fine but I want is a later portion of the video within that clip to be shown as it is flying by. As it is now the clip is just beginning to show the footage I want as it is flying out of view.

How to delete trailing zeros after the decimal point in the ALV sum

Hello Expert,
In my alv output, I need to sum up one column, but in the sum result, I don't want to display zeros after the decimal point.
for example,
If the sum is 134.00, I only want to display 134 on the alv.
Does any expert have idea about it?
Thanks in advance,
best regards, Johnny

Hi ,
Use following
SHIFT variable RIGHT/LEFT DELETING TRAILING '0'.
For more variations ,
just write SHIFT and press f4 , it will show you the information you need.
Hope this is helpful,
Regards,
Uma Dave

Limit the number of digits after the decimal point

hi,
in webform how to limit the number of digits after the decimal point?
thanks

Hi,
In the Web form Design menu there is a tab for Other Options wherein you would find the setting for number of Decimal places.
Thanks.
Madhavi

How to set the report path in a model plugin

I am trying to figure out how to set the report path in a process model plug-in. I can seem to figure out how to get access to it. It seems like this would be a reasonable thing to do since the plug-ins are for results processing. Does anyone know how to do this? We typically use the Sequential process model but I am trying to keep my plug-in as independent of that as possible.
Thanks.
Solved!
Go to Solution.

If I understand, you want your plug-in, when enabled, to alter the settings of any other instances of the NI report plug-in such that their reports share the same directory as your plug-in is configured to use.
If so, your plug-in can access and modify the settings of all other plug-in instances. All instances are passed to all plug-in entries point in the plugins array sub-property of the ModelConfiguration parameter. You can iterate through this array. Any element of the array with a Base.SequenceFilename equal to "NI_ReportGenerator.seq" is an instance of the NI report plug-in. Its report options are stored in the element under PluginSpecific.Options.
You can change the report options to what ever you want. Note that the ReportOptions model callback is called from the Initialize model-plugin entry point, so you might want to ensure that your changes are applied after that, so they aren't overwritten. To do that, you could make your changes in the the Initialize entry point of your plug-in, and ensure that your plugin runs last. To make it run last, you could set the FileGlobals.ModelPluginComponentDescription.Default.Base.RunOrder in your plug-in file to a value greater than 0, such as 1.0 (see TestStand Help>>Fundamentals>>Process Model Architecture>>Process Model Plug-in Architecture>>Structure of Plug-in Sequence Files>>Model Plug-in Entry Points>>Order of Entry Point Execution at Run Time).

Sending image sequence job to compressor in command line : how to set the framerate?

Hello,
In Compressor, when you import a image sequence, it's possible to set the framerate and add an audio file before choosing a preset and lauching the encoding task.
I want to dlo the same thing with command line. I know how to send a compressor job with command line, but no how to add theses settings.
In the compressor command line help, we've got this :
Job Info: Used when submitting individual source files. Following parameters are repeated to enter multiple job targets in a batch
          -jobpath <url> -- url to source file.
                                           -- In case of Image Sequence, URL should be a file URL pointing to directory with image sequence.
                                           -- Additional parameters may be specified to set frameRate (e.g. frameRate=29.97) and audio file (e.g. audio=/usr/me/myaudiofile.mov).
So there are also framerate and audio parameters in command line but i've no idea how to write the command line with theses parameters
Here is an example of command line for Compressor (by Apple) :
./Compressor ‑clusterid tcp://127.0.0.1:51737 ‑batchname myBatch ‑jobpath /Volumes/Source/ShortClips/NTSC24p.mov ‑settingpath /Users/stomper10/Library/Application\ Support/Compressor/PhotoJPEG.setting ‑destinationpath /Users/machinename/Movies/myDestinationFilename.mov.
Thank you for your help!

You can see in the command sh running-config command
show running-config : Displays the current access point operating configuration
Use the guest-mode SSID configuration mode command to configure the radio interface (for the specified SSID) to support guest mode. Use the no form of the command to disable the guest mode.
[no] guest-mode .
Here is the guideline for usage
The access point can have one guest-mode SSID or none at all. The guest-mode SSID is used in beacon frames and response frames to probe requests that specify the empty or wildcard SSID. If no guest-mode SSID exists, the beacon contains no SSID and probe requests with the wildcard SSID are ignored. Disabling the guest mode makes the networks slightly more secure. Enabling the guest mode helps clients that passively scan (do not transmit) associate with the access point. It also allows clients configured without a SSID to associate.
Examples
This example shows how to set the wireless LAN for the specified SSID into guest mode:
AP(config-if-ssid)# guest-mode
This example shows how to reset the guest-mode parameter to default values:
AP(config-if-ssid)# no guest-mode

How to set the PATH in Terminal?

As a newbie to Bash and the Terminal, in connection with installing a new version of Ruby and various add-ons, I have been messing around with changing the PATH via various methods I've found on the internet, and trying to add a new directory to my PATH. Unfortunately, I cannot figure out how to set the PATH correctly. Here is what I understand so far:
1. Bash first looks to ".bash_profile" in the home directory for PATH settings.
2. If none, Bash then looks to ".bash_login" for PATH settings.
3. If none, Bash then looks to ".profile".
4. If none, Bash then looks to a system file in "/etc/profile" for default PATH settings.
5. For a new shell after login, Bash looks for a ".bashrc" file.
I cannot find any of the above files (I have Finder set to show hidden files already). Somehow, following some instructions from the internet without really knowing what I was doing over the past week I have set my PATH as follows:
/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/Users/*****/src:/usr/X11/bin
but I cannot find the file that is setting this PATH. I have tried creating a new ".bash_profile" shell file and putting it in various places such as "/bin" and "/usr/bin" but the file is not being read.
* As a temporary workaround I tried using the command "source .bash_profile" upon login to set the PATH using the .bash_profile file that I created, but it does not work.
* I am able to temporarily alter the path using the command "PATH=/usr/local/bin:$PATH" but this only lasts for an active shell; when I close out and reopen a new shell, it reverts to the default.
So my questions are:
Is it correct that there is a "/etc/profile" somewhere that is setting the default PATH? If so where is it? Should I alter it, or create a new ".bash_profile" somewhere to set the PATH? If not, where is my PATH being set? If I should create a new ".bash_profile", what exactly should go in it?
Thanks in advance for any assistance.

... I created a new ".bash_profile" file directly under my home directory and it worked like a charm. Below is the content of the file:
"PATH=/usr/local/bin:/bin/:/sbin/:/usr/bin/:/usr/sbin/:/Users/******/Ruby:/Users/*******/src:/Users/******/Java Programs/"
What are the "..."'s? Is that just you, or is the contents of the file actually inside of double quotes?
is there an 'export PATH' also in the file? As in
PATH=/usr/local/bin:/bin/:/sbin/:/usr/bin/:/usr/sbin/:/Users/******/Ruby:/Users/*******/src:/Users/******/Java Programs/
export PATH
And did you either restart your Terminal session so your .bash_profile was read, or issue a 'source .bash_profile' command to execute the .bash_profile after your change?
The only remaining problem is that from the home directory, I'm unable to directly run programs in the above-designated subdirectories (without first navigating to the subdirectory containing the file. Is there something wrong with the syntax or order of the directories I put in the path?
For example: there is a file called "newprogram.rb" in the "Ruby" directory listed above. I should be able to execute it from the home directory using "ruby newprogram.rb" but it does not work. The same command works fine from within the "Ruby" directory.
Does the 'ruby' command search PATH to find its scripts?
Have you read the "man ruby" man page to see if it talks about PATH?
A common Unix feature is that programs and scripts with the executable bit set, and are located in a PATH directory, will be run if you just type their names.
For example, if the first line of newprogram.rb script starts with
#!/usr/bin/ruby
and if the script is executable
chmod +x newprogram.rb
And if it is in a directory in PATH, then just typing
newprogram.rb
should run your perl script using /usr/bin/ruby. If you want to use a different version of Ruby, then change the #! line so it point to your version of Ruby. Or if your version of Ruby is found earlier in PATH then the /usr/bin/ruby, you can use
#!/usr/bin/env ruby
as your script's first line which will search PATH for 'ruby' and use the first one it finds.
Message was edited by: BobHarris

How to set the decimal point to 0

Similar Messages

Maybe you are looking for