How to set the default boot drive

I have three boot drives on my Power Mac G5. One is Tiger on the internal factory installed drive. The second one is Tiger on an external SATA drive. The third is Leopard on the second external SATA drive.
When I boot the Power Mac, by default, I want to always boot Tiger on the external SATA drive, but when I boot the Power Mac the system seems to want to always default to the Leopard drive.
I've booted using the startup disk choice in System Preferences, but is that the correct way to set the default boot drive or is there some other way to set the boot drive preference?
My only other idea is to just reformat the Leopard drive, but I would still like to have a bootable Leopard just in case I want to use that.
Any advice?
Message was edited by: kae

The Startup Disk Pref Pane should make it permanent!?
Might try Resetting your Mac's PRAM, then set the Startup Disk Pref Pane again.
http://docs.info.apple.com/article.html?artnum=2238

Similar Messages

How to set the default boot kernel in /etc/default/grub or /etc/grub.d

and without messing with /boot/grub/grub.cfg ?
I need this so that new kernels show up but do not change the default boot kernel
Is there a way to do it by file name instead of position within the menuentry / submenu list?
I found some ubuntu and fedora sugestions but all by position, none by name
AND how to set the kdump kernel as the default?
Arch is putting this kernel under a submenu - would this pose problems for setting it as the default?
Last edited by Sanjeev K Sharma (2015-04-06 12:59:22)

Sanjeev K Sharma wrote:
and without messing with /boot/grub/grub.cfg ?
I need this so that new kernels show up but do not change the default boot kernel
Is there a way to do it by file name instead of position within the menuentry / submenu list?
I found some ubuntu and fedora sugestions but all by position, none by name
AND how to set the kdump kernel as the default?
Arch is putting this kernel under a submenu - would this pose problems for setting it as the default?
In /etc/default/grub you can use the name of your entry you wish to use as default
GRUB_DEFAULT='Arch Linux, with Linux core repo kernel'
You can tell grub to stop using submenus by doing:
GRUB_DISABLE_SUBMENU=y
Or you can just make a purely custom menuentry in /etc/grub.d/40_custom if you'd like:
menuentry "Other Linux" {
linux <KERNEL IMAGE HERE>
initrd <INITRD IMAGE HERE>
EDIT: /etc/grub/default -> /etc/default/grub
Last edited by Slabity (2015-04-07 11:16:22)

Set the default boot.

How to set the default boot to OSx? And what button is the "option" on my macbook pro 13 2011 ?

If you installed the drivers sofftware then there should be a Startup Disk control panel in Windows. However, you can boot back to OS X without it:
From Windows restart the computer.
After the chime press and hold the OPTION (ALT) until the boot manager appears.
Select the disk icon of the OS X volume.
Click on the arrow button below the icon.
Once back in OS X you can use Startup Disk preferences to reset the permanent startup volume.

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

"I would like to know how to set the default view for the columns. Somewhere I read it could be done in by music icon under Library. Can't find it. Thanks

"I would like to know how to set the default view for the columns that are shown in iTunes. Every time I open it, I have to either go to the options, or right-click to get the pop-up options, and delete "rating" and add "composer." I'd really like to just do it once and be done with it." Somewhere I read you could do this by clicking on the Music icon under LIBRARY then arramge the columns. Trouble is, I can't find a Musi Folder or icon in my user library.
Any help would be appreiated. OSX 10.9.2 iTunes version 11.1.5 Thanks!!! CW!

From the iTunes menu bar try View>Show View Options. Make sure what you want to see is checked and what you don't is unchecked. You can do this (may need to do this) for any playlists, your main Library, etc.
Good luck
srb

How to set the default text in an input box or a label to be a predefine, multiline text

how to set the default text in an input box or a label to be a predefine, multiline text. In other words how to break the line in the code of a text box.
thank you

There are a couple of ways of doing this:
If you're editing on the canvas, press Shift + Enter.
If you're working in Express View (see lower right hand corner of Project Siena), you'll need to copy a hard return from another app such as Notepad.
I believe a better implementation of hard returns are in the list of requested functionality that you can find here:
https://social.technet.microsoft.com/Forums/en-US/2e1f9446-56b2-419a-9c17-7037d2cd6146/from-the-community-overview-of-requested-additional-functionality?forum=projectsiena
Thor

How to set the default selection to "Select All" in a Multi valued parameter in SSRS 2008?

Hello Everyone,
How to set the default selection to "Select All" in a Multi valued parameter in SSRS 2008?
Regards
Gautam S
Regards

You need to specify "Default Values" in the report parameter property. Choose similar option used in the "Available Values" option, this will allow the parameter to check "Select All".
Regards, RSingh

How to set the Default values for Info Objects in Data Selection of InfoPac

Hi All,
Flat file Extracion:
How to set the Default values for Info Objects in Data Selection Tab for Info Package
ex: Fiscal Year Variant Info Object having values 'K4' 'Y2' etc in Flat file
Initially default value(not constant) for this info Object value should be 'K4' in Info Package
If I set data selection value for this info object K4 it will retreive records with this selection only? how to handle
Rgds,
CV

Hi,
suppose as your ex. if you are having fiscalyear variant in the dataselection tab then specify K4 in the from column, again the ficalyearvariant row and click on insert duplicate row at the bottom . you will get another row . In that enter Y2 in the from column. now you can extract K4, y2 values .
haritha

How to set the default context value for flexfield in OAFramework pages

Hi,
I have a page which contains a contexxt value field i.e Flexfields
To select the context value we have to select the value from drop down
So Here we want to display the context value immediately when the page is called
How to set the default valu in this case
Regards,
Krishna

You can set the Attribute category view attribute to the Flexfield context value and call prepareforRendering in the flex bean. Check the dev guide for details.
Regards
Sumit

How to set the default value of an item type DATE PICKER to the day of yest

Hi
How to set the default value of an item type DATE PICKER to the day of yesterday ?
Thank you very much !
Christian.

Hi Christian,
Have a look at this thread Re: Default the Date Picker to Today
It covers this issue in detail.
Regards
Paul

How to set the default value in dashboard prompt?

Hi there,
In my Dashboard prompt I'm getting values like:
Mar 2010
Apr 2010
May 2010
Jun 2010
How to set the default value to the current month (Jun 2010). I don't want to use "specific value". I want to use the "SQL Result" for populating the default value.
Appreciate your help

hi,
you can create a Repository variable current_month with the expression as
select to_char(trunc(sysdate),'Mon')from dual
and use this in the prompt "Default to" Server variable and use this repository variable.
hope this helps.
cheers,
vineeth

How to set the default settment rule for the same kind project.

hi experts:
the project of the same kind of the project profile have the same settment rule to one account (G/L).
how to set the default settment rule for the project of this kind of the project profile.
regards

Hi,
You need to define the settlement profile and allocation structure.
next you need to define the Strategy for settlement rule.
navigation-PS> costs> automatic and periodic allocations> settlement> Settlement rule for WBS
--> Define strategy for settlement rule.
Select the strategy and click on settings. in that new entries, check the Acc Assg element, enter Settlement profile and mention accass category as reposnsible cost center.
Save this transaction.
Now create a project assgin responsible costcenter for the WBS element in the project buider and save the transaction.
Now run CJB2 transaction for the project, settlement rule will generated automatically.
even you can configure the same for profitability segment.
Rgds
Sudhir Reddy

How to set the default NetworkInterface for the default socket factory?

Hi,
I would like to know how to set the default network interface used by the JVM. I saw that you can specify the network interface when creating a socket. But my problem is that I dont want to change every socket creation in the application and even worse some partner's libraries wich I dont have access to code also create sockets. So is there a way to specify to the JVM wich interface to use by default? I didn't saw any System.properties to set this and my googling fishing didn't return anything usefull.
Thanks

By default it will use whichever one the routing tables tell it will give the shortest path to the destination. For globabl changes, adjust your routing tables. You can't do this from Java, you have to use whatever OS tools are to hand.

How to set the oracle oci8 driver?

hello all:
I've set up the oracle thin driver and it works. but when I change to
oci8.it don't work
below is config and errors:
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="5" LoginDelaySeconds="5" MaxCapacity="15"
Name="ocipool"
Properties="user=yanji;password=yanji"
Targets="myserver" URL="jdbc:oracle:oci8:@pg01"/>
Could not load 'oracle.jdbc.driver.OracleDriver
If this is a type-4 JDBC driver, it could occur if the JDBC
driver is not in the system CLASSPATH.
If this is a type-2 JDBC driver, it may also indicate that
the Driver native layers(DBMS client lib or driver DLL)
have not been installed properly on your system
or in your PATH environment variable.
This is most likely caused by one of the following:
1. The native layer SO, SL, or DLL could not be found.
2. The file permissions on the native layer SO, SL, or DLL
have not been set properly.
3. The native layer SO, SL, or DLL exists, but is either
invalid or corrupted.
For more information, read the installation documentation
for your JDBC Driver, available from:
http://e-docs.bea.com
at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection
ectionEnvFactory.java:208)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource
ectionEnvFactory.java:131)
at weblogic.common.internal.ResourceAllocator.makeResources(Resource
ator.java:698)
at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocat
va:282)
best regards

Hello, Jenny I am glad you found your resolution. I too am having problems isung
the oracle 0CI8 driver. My connection pool is creating fine, but my server is
crashing with JVM errors.
Here are my configurations.
DBase=Oracle 8.1.7,OS=Win2000, running 6.1 with Portal 4.0
pool config =
<JDBCConnectionPool CapacityIncrement="0"
DriverName="oracle.jdbc.driver.OracleDriver" InitialCapacity="5"
MaxCapacity="5" Name="ccConPool"
Properties="jdbc.url=jdbc:oracle:oci8:@servername:1521:orcl;user=XXXXX;password=XXXXXX;dll=ocijdbc8;server=orcl;protocol=oci8;dll=ocijdbc8;protocol=oci8"
RefreshMinutes="0" Targets="portalServer"
TestTableName="WIP_TABLE" URL="jdbc:oracle:oci8:@servername"/>
My classpath sets my classes12.zip file first. My path sets %WEBLOGIC_HOME%\bin\oci817_8
and %WLCS_ORACLE_HOME%\bin.
Am I setting the right dll and protocol in my .dll? Where can I find documentation
on these properties definitions?
"jenny" <[email protected]> wrote:
hello all:
I've got the answer. those all because weblogic.jar. this jar include
the
class "oracle.jdbc.driver.OracleDriver".
although I put the classes12.zip into the CLASSPATH.but the weblogic.jar
in
front of classes12.zip.so classloader
load the class from weblogic.jar. so I can use thin driver(weblogic
implements this function with class,but not for oci8 )
..this is really a big pitfall !
put the classes12.zip in front of weblogic.jar .all perfect!
"jenny" <[email protected]> wrote in message
news:[email protected]...
hello all:
below is some chapters of my config.xml and startWeblogic.cmd
the oci8 :
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="5" LoginDelaySeconds="5" MaxCapacity="15"
Name="ocipool" Password="{3DES}J3XuQd6cvvw="
Properties="user=yanji;password=yanji;dll=ocijdbc8;protocol=oci8"
Targets="myserver" TestTableName="test"
URL="jdbc:oracle:oci8:@pg01"/>
the thin :
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="5" LoginDelaySeconds="5" MaxCapacity="15"
Name="citcpool" Password="{3DES}J3XuQd6cvvw="
Properties="user=yanji;password=yanji"
SupportsLocalTransaction="true" Targets="myserver"
URL="jdbc:oracle:thin:@sune250:1521:pg01"/>
:runWebLogic
echo on
set ORACLE_HOME=e:\oracle
set PATH=./bin;%ORACLE_HOME%\bin;%ORACLE_HOME%\lib;%PATH%
set
CLASSPATH=.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar;.\lib\dom.jar;.\lib\xml
4j.jar;.\lib\jecf.jar;%ORACLE_HOME%\jdbc\lib\classes12.zip
echo off
the thin driver is ok,but the oci driver can not work!
if I've set the wrong CLASSPATH or PATH , the thin driver and oci8driver
must have not worked. I confused!
"Sree Bodapati" <[email protected]> wrote in message
news:[email protected]...
"Sree Bodapati" <[email protected]> wrote in message
news:[email protected]...
Its not CLASS_PATH it should be CLASSPATH.
when you say oracle\bin and oracle\lib , on what driver is the oracle
folder?I meant to say 'on what drive' not 'on what driver'
you have to specify the full path.
post your startup script here.
sree
"jenny" <[email protected]> wrote in message
news:[email protected]...
hello all:
I've set the ORACLE_HOME,and CLASS_PATH,but nothing changed. I will
go
to
crazy!!!
when startup the weblogic,I've seen the oracle\bin and oracle\libin th
"path" and classes12.zip in the CLASS_PATH.but the errors stillappears!!
"Sree Bodapati" <[email protected]> wrote in message
news:[email protected]...
1. Dont copy this file oci8jdbc.dll, to bin folder. Make sure
you
place
<oracle_home>\lib in your PATH before starting the server. Make
sure
your
ORACLE_HOME environment varable is set to <oracle_home> folder.
eg. set ORACLE_HOME=c:\ora816 before starting the server.
so you must have done something like
set ORACLE_HOME=c:\ora816
set PATH=%ORACLE_HOME%\bin;%ORACLE_HOME%\lib;%PATH%
2. double check if you set your CLASSPATH something like this,
CLASSPATH=%ORACLE_HOME%\jdbc\lib\classes12.zip;%CLASSPATH%
in the server startup script just before starting the server.
3. start the server the connection pool should work.
hth
sree
"jenny" <[email protected]> wrote in message
news:[email protected]...
hello All:
I've edited the StartWeblogic.cmd, set the classes.zip into CLASSPATH,and
copied the oci8jdbc.dll to the bea\wlserver6.1\bin. errors stillappears!
my weblogic version is 6.1 and oracle is 8.1.6 .
why the thin driver is ok but the oci driver can not work?
I logined in the oracle website and look for the jdbc.but I find
that
jdbc
all provide for jdk1.2 or jdk1.1. because the weblogic6.1 based
jdk1.3.
I
think i can not use those drivers.
I think my oracle driver is ok,because i installed the jboss and
bas4.5
in
my computer. they all can use oci8 driver properly.and they all
based
jdk1.3.
by the way. I 've tryed added the oracle\bin path inStartWeblogic.cmd,
nothing changed !
again below is my config : I want to know whether my config right?
(the property DLL and Protocal auto added by the weblogic)
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="5" LoginDelaySeconds="5" MaxCapacity="15"
Name="ocipool"
Properties="user=yanji;password=yanji;dll=ocijdbc8;protocol=oci8"
Targets="myserver" URL="jdbc:oracle:oci8:@pg01"/>
best regards
----- Original Message -----
From: "Mitesh Patel" <[email protected]>
Newsgroups: weblogic.developer.interest.jdbc
Sent: Thursday, December 13, 2001 4:00 AM
Subject: Re: how to set the oracle oci8 driver?
To use oracle oci8 driver:
You should have classes12.zip in weblogic classpath.
You should have ocijdbc8.dll in your weblogic path..
You can download ocijdbc8.dll from oracle website.
Mitesh Patel
jenny wrote:
hello all:
I've set up the oracle thin driver and it works. but when I
change
to
oci8.it don't work
below is config and errors:
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="5" LoginDelaySeconds="5" MaxCapacity="15"
Name="ocipool"
Properties="user=yanji;password=yanji"
Targets="myserver" URL="jdbc:oracle:oci8:@pg01"/>
Could not load 'oracle.jdbc.driver.OracleDriver
If this is a type-4 JDBC driver, it could occur if the JDBC
driver is not in the system CLASSPATH.
If this is a type-2 JDBC driver, it may also indicate that
the Driver native layers(DBMS client lib or driver DLL)
have not been installed properly on your system
or in your PATH environment variable.
This is most likely caused by one of the following:
1. The native layer SO, SL, or DLL could not be found.
2. The file permissions on the native layer SO, SL, or DLL
have not been set properly.
3. The native layer SO, SL, or DLL exists, but is either
invalid or corrupted.
For more information, read the installation documentation
for your JDBC Driver, available from:
http://e-docs.bea.com
atweblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection
ectionEnvFactory.java:208)
atweblogic.jdbc.common.internal.ConnectionEnvFactory.createResource
ectionEnvFactory.java:131)
atweblogic.common.internal.ResourceAllocator.makeResources(Resource
ator.java:698)
atweblogic.common.internal.ResourceAllocator.<init>(ResourceAllocat
va:282)
best regards
"jenny" <[email protected]> wrote in message
news:[email protected]...
hello all:
I've set up the oracle thin driver and it works. but when I change
to
oci8.it don't work
below is config and errors:
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="5" LoginDelaySeconds="5" MaxCapacity="15"
Name="ocipool"
Properties="user=yanji;password=yanji"
Targets="myserver" URL="jdbc:oracle:oci8:@pg01"/>
Could not load 'oracle.jdbc.driver.OracleDriver
If this is a type-4 JDBC driver, it could occur if the JDBC
driver is not in the system CLASSPATH.
If this is a type-2 JDBC driver, it may also indicate that
the Driver native layers(DBMS client lib or driver DLL)
have not been installed properly on your system
or in your PATH environment variable.
This is most likely caused by one of the following:
1. The native layer SO, SL, or DLL could not be found.
2. The file permissions on the native layer SO, SL, or DLL
have not been set properly.
3. The native layer SO, SL, or DLL exists, but is either
invalid or corrupted.
For more information, read the installation documentation
for your JDBC Driver, available from:
http://e-docs.bea.com
atweblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection
ectionEnvFactory.java:208)
atweblogic.jdbc.common.internal.ConnectionEnvFactory.createResource
ectionEnvFactory.java:131)
atweblogic.common.internal.ResourceAllocator.makeResources(Resource
ator.java:698)
atweblogic.common.internal.ResourceAllocator.<init>(ResourceAllocat
va:282)
best regards

How to set the default item showed in a h:selectonemenu

I need to show the second, or the third, and on so.
i tried some ways to set the default item showed in it, but failed.
i had tried the attribute value, but it stiil showed the first item.
Can u help me?
in the JSP
<h:selectOneMenu id = "companyName" rendered="true" binding="#{j03CMSyainAddBean.selectCompany}" style="width:150">
<f:selectItems value="#{j03CMSyainAddBean.companyList2}"/>
</h:selectOneMenu>in the back BEAN
private UISelectOne selectCompany;
private ArrayList companyList2;In the ArrayList companyList2, there are several selectItems.
Thanks
George

Sanjeev K Sharma wrote:
and without messing with /boot/grub/grub.cfg ?
I need this so that new kernels show up but do not change the default boot kernel
Is there a way to do it by file name instead of position within the menuentry / submenu list?
I found some ubuntu and fedora sugestions but all by position, none by name
AND how to set the kdump kernel as the default?
Arch is putting this kernel under a submenu - would this pose problems for setting it as the default?
In /etc/default/grub you can use the name of your entry you wish to use as default
GRUB_DEFAULT='Arch Linux, with Linux core repo kernel'
You can tell grub to stop using submenus by doing:
GRUB_DISABLE_SUBMENU=y
Or you can just make a purely custom menuentry in /etc/grub.d/40_custom if you'd like:
menuentry "Other Linux" {
linux <KERNEL IMAGE HERE>
initrd <INITRD IMAGE HERE>
EDIT: /etc/grub/default -> /etc/default/grub
Last edited by Slabity (2015-04-07 11:16:22)

How to set the default boot drive

Similar Messages

Maybe you are looking for