How to set the Description Name of Sales Employee in COPA

Dear Expert,
I maintained Characteristis Sales Employee at COPA but when I run this report, there is no description name of employee appear. It just appear the Number of Sales Employee.
I used table VBPA and field Name PARVW in Characteristic Derivation. In Sales Document I created Partner Functin VE Sales Employee.for characterristic and I ser VE Partner Function in SD Document.
In Data Structure KMVTNR Sales Employee there is no Validation Check Table. 
Kindly help to solve this problem and thank you in advance for your help.
Cyrenia

You need to use Characteristic Derivations for this to work.
In transaction KEDR, maintain a "look-up" and provide your Reference table as VBPA and your target field will be the COPA Characteristic that you defined for the Partner Function Sales Employee.
Select the Characteristics that will allow you to determine the Sales Employee (Partner Function = "VE") and then map the KUNNR field to the COPA Value Field.
This will allow the flow of Sales Employee Values into COPA and hence the description as well.
Hope this helps.
Cheers.

Similar Messages

  • Characteristic Name of Sales Employee in COPA report is not appear

    Characteristic Name of Sales Employee in COPA report is not appear, it is just the a Code of Sales Employee
    1.I created Characteristic Derivation t.code KEDR Table lookup PA0001 using condition Origin GLOBAL USERTEMP1 until USERTEMP6
    2.During Test Analyze Derivation there was result “Derivation was not carried out. Reason: Not fulfilled” in Field USERTEMP6
    How to solve this problem?
    Thanks & Regards,
    Cyrenia

    You need to use Characteristic Derivations for this to work.
    In transaction KEDR, maintain a "look-up" and provide your Reference table as VBPA and your target field will be the COPA Characteristic that you defined for the Partner Function Sales Employee.
    Select the Characteristics that will allow you to determine the Sales Employee (Partner Function = "VE") and then map the KUNNR field to the COPA Value Field.
    This will allow the flow of Sales Employee Values into COPA and hence the description as well.
    Hope this helps.
    Cheers.

  • How to set the card name of wml in Simple Result?

    Hi,
    I nned to set the card name appearing in the WML device (browser show the name of the card in the top of the screen)
    How do i set an page tile in SR? I cant find such a parameter any where on the tags... Ideas?
    Regards,
    Lars

    Lars,
    You may use SimpleTitle element to display the title. See the following example copied herewith from developer's guide.
    <?xml version = "1.0" encoding = "UTF-8" standalone="yes" ?>
    <!DOCTYPE SimpleResult PUBLIC "-//ORACLE//DTD SimpleResult 1.1//EN" "http://xmlns.oracle.com/ias/dtds/SimpleResult_1_1_0.dtd">
    <SimpleResult bgcolor="99ff99">
    <SimpleContainer>
    <SimpleText>
    <SimpleTitle>Seach Result</SimpleTitle>
    <SimpleTextItem>
    <SimpleEm level="strong">1 Entry found</SimpleEm>
    <SimpleBreak msecs="500"/>
    <SimpleStrong level="strong">Chandra Patni</SimpleStrong>
    <SimpleBreak/>400 Oracle Pkwy
    <SimpleBreak/>Redwood Shores
    <SimpleBreak/>CA, 94065
    </SimpleTextItem>
    </SimpleText>
    </SimpleContainer>
    </SimpleResult>

  • [SOLVED] How to set the packager name for an AUR package?

    Hi,
       I'm maintaining an AUR package (fspcc), but I don't know how to set the name of the "packager" for that package.
    E.g. when you request info about some package
        $ pacman -Qi somepkg
    there is a line
        Packager: Unknown Packager
    that specifies the packager.
    How do I set this "Packager" info so that any user installing my package will see what I want?
    Last edited by lisztinf (2014-04-13 13:39:43)

    Thanks for the answer.
    I guess that when I run
       $ makepkg
    in my local build directory, then "mkpkg" will build a package with the "Packager" info set accordingly to my local makepkg.conf.
    However, I would like another user - with his own makepkg.conf - to see what I want when installing the package. How can I achieve this?
    If I install an official package - say pacman itself - through ABS, I see the "Packager" field properly set for that official package. But certainly this info doesn't come from my local makepkg.conf. I would like the same behaviour for my package. Is it possible?

  • How to set the snc name to abap server with IDM?

    HI all:
         I want to set the snc name from IDM , but I didn't konw  which attribute that I would be set.
    I there anyone konw this?
    thanks!

    Hi Shi,
    I'm guessing you don't know which attribute in the MX_PERSON class contains it?
    If this is what you meant, then there isn't a default attribute for that, you can either create one manually or let the synch process create it by enabling "automatic attribute creation" setting for the Identity Store.
    Eric

  • How to Set the JNDI name in J2EE 1.4 ??

    Hello,
    I am sure i am have done everything right except for the JNDI name ! I have recently shifted to J2EE 1.4. I was using j2EE 1.2.
    So kindly tell me how should i set me JNDI name in the deploytool.
    Here is the exception i got when i tried to run my application without having set any JNDI name !!
    http://img220.imageshack.us/img220/832/hellodt5.gif
    Thanks.

    There are 2 types of descriptors:
    standard and portable deployment descriptors (e.g. ejb-jar.xml, web.xml, application.xml, etc)
    vendor specific deployment plan (e.g., sun-ejb-jar.xml, sun-web.xml, sun-application.xml, jboss.xml, weblogic.xml, etc)
    When you are developing ejb apps with glassfish, or JavaEE SDK, or Sun Java System Application Server, you usually package all descriptors in META-INF directory inside the jar.
    You can also create portable apps that do not contain any vendor specific deployment plans. So you can deploy it to any appserver. At deployment time, you then specify an option to pass the deployment plan to deploy tool. This is required by JSR 88 and all J2EE- or JavaEE-compliant appserver must support this.
    In Glassfish, JavaEE SDK, or SJSAS, you can:
    $SJSAS_HOME/bin/asadmin deploy --deploymentplan /tmp/deploy-plan.jar /tmp/my-ejb.jar
    where /tmp/deploy-plan.jar is a jar file containing sun-ejb-jar.xml for the deployable ejb-jar:
    jar tvf deployment-plan.jar
    0 Thu Oct 12 11:55:00 EDT 2006 META-INF/
    106 Thu Oct 12 11:54:58 EDT 2006 META-INF/MANIFEST.MF
    570 Thu Oct 12 11:55:00 EDT 2006 sun-ejb-jar.xml

  • How can set the responsiblity name and operatingunit name at header level y

    Dear all
    Good Morning
    i have to set the respname and org name at header level
    i taken the item at page level userinfo it is coming the right side of the page i want to be set at header level only in left side top only...
    is there any item style for this requiremt
    Regards
    Sreekanth

    Dear Sumit
    I designed one custom page in top header level i want to put Operating unit name and responsiblity name i mean in which responsiblity user working in that page...
    i want to set these two properties
    in process request i wrote the code
    int orgid=pagecontext.orgid();
    String respname = pageContext.getResponsibilityName();
    i want to set these values to icorresponding items
    these items i want to create at the top level of the header
    which region which style.........
    in page level i taken userinfo item it is coming right side of the header
    i want to set these two items either left or right i want to set header level only
    Regards
    Sreekanth

  • How to set the "display name" of an customized property

    Hi,
    I've created a customzied property of KM file with KM API, and display it in KM navigation iview. It is ok, except the Column head show the technical name of the property. But what i want is some specify display name and even can support multi language, how this can be done?? Any hint?? Thanks!!
    Best Regards,
    Xiaoming Yang

    you must change the collection render and the resource render in order to show the properties you want.
    For translation propourses check this link
    http://help.sap.com/saphelp_nw04/helpdata/en/75/e000861cb8ad4b8e4f19dd6416346d/frameset.htm
    You must deal with resource bundle

  • How to set the default name when exporting a report ?

    <p><span class="PSLONGEDITBOX">I use crystal reports in my C# asp application, with the CrystalReportViewer class. When the end user exports the reports by clicking on the toolbar button, the "save as" dialog box appears, with  default name "_viewer.pdf" or "_viewer.xls" etc. "_viewer" being the CrystalReportViewer&#39;s instance name. <br />Has anyone an idea to change this default name ? </span></p><p><span class="PSLONGEDITBOX">T</span><span class="PSLONGEDITBOX">he end user would like at least the report name. <br /><br />Thanks</span></p>

    I looked around and I it appears that you have found the only way to set this. There doesn't seem to be dynamic support for the exported file names.
    Rob Horne
    http://diamond.businessobjects.com/blog/10

  • How to set the language key in Sales document header text?

    Hi Guys,
    When I am creating a sales order I found in the header text tab only three languages English, Thai and Ukranian are mentained.. So can you please tell me how to add/ delete more language keys in language key field in a step by step process???
    Thanx and regards,
    JEET

    Just select the "unwanted language" keys (By 'right clicking') on each & then use the "delete" icon (3rd icon) on the bottom half.
    you can also manintain as many languages as you want.
    Pls do the needful.
    Rgds
    Sumanth.Gururaj
    Edited by: SUMANTH GURURAJ on Jan 21, 2011 6:21 PM

  • How to set the username in PeopleEditor programmatically

    Hi ,
    How to set the user name in people picker entity programmatically.
    I have tried this:
    <sp:PeopleEditor ID="sppcustom" runat="server" AllowEmpty="false" MultiSelect="false" SelectionSet="User" />
    In the webpart cs code:
    PeopleEditor sppcustom = new PeopleEditor();
    sppcustom.CommaSeparatedAccounts = "domain" + "\\" + userFullname;
    The code is executing fine without error, however the username is not shown in the peopleeditor.
    When the name is added, i am getting the error "No exact match was found. Click the item(s) that did not resolve for more options.".
    However the username is a valid one. i tried the validate code also and the username was validated.
    How to fix this?
    Thanks

    You can set the display name of the particular user
    sppcustom.CommaSeparatedAccounts = userFullname.Name;
    if userFullname is SPUser 
    Gnanasekhar K

  • How to Rename the technical name and description of an infocube?

    Hi,
    How to Rename the technical name and description of an infocube?
    Thanx in advance,
    Ravi.

    Ravi,
    You cant change the Technical name of the cube but you can change the description of the Cube. If you want to have a Cube with the same properties and with different Techname and Description better you do copy from the base cube and rename as per your requirement.
    Regards,
    Gattu.

  • How to set dynamic host name in the URL of a URL iView?

    Hello,
    I am using a standard URL iView that points to some J2EE app I've written and deployed on the same server.
    I would like to set the host name to be a dynamic one, this way I won't need to change the iView URL when transporting it from one portal to another. As far as I know the system for a URL iView only controls authorizations but cannot replace the full URL set in the iView.
    Any idea who can this be achieved?
    Roy

    Hi Mrityunjay,
    forced URL at runtime will require me to call the URL iView from another iView that I will need to code (setting the URL in the Request object). If I did all this I might as well call it from this iView already.
    I would like to do it with no further developments. I would have thought that SAP has constants that can be plugged in the URL for this type of thing, i.e. $hostname...
    Rgds,
    Roy
    Edited by: Roy Cohen on Aug 21, 2008 4:03 PM

  • How to set the parameter

    hi i am creating xml publisher and from OAF with parameters
    cusname:
    runreportdate:
    go clear buttons
    click go open report in pdf
    SELECT hp.party_name CustomerName,
      csi.incident_number SRNumber,
      to_char(csi.incident_date,'DD-MON-YYYY') SRDate,
      to_char(csi.close_date,'DD-MON-YYYY') SRCloseDate,
      mtl.description SRItemName,
      csi.summary Summary,
      csi.problem_code,
      csi.incident_address SRAddress,
      csi.INCIDENT_COUNTRY SRCountry,
      '31-DEC-2008' Reportrundate,
      COUNT ( * ) over () cnt,
      cis.name,
      COUNT(
      CASE
        WHEN cis.name='Low'
        THEN 1
      END) over () Low,
      COUNT(
      CASE
        WHEN cis.name='Medium'
        THEN 1
      END) over () Medium,
      COUNT(
      CASE
        WHEN cis.name='High'
        THEN 1
      END) over () High1,
    to_char(csi.incident_date,'MON-YYYY') SrMonth
    FROM hz_parties hp,
      hz_cust_accounts hca,
      hz_contact_points hc,
      cs_incidents_all_b csi,
      ar_lookups arl,
      cs_incident_severities_b cis,
      mtl_system_items_kfv mtl
    WHERE hca.cust_account_id   =csi.account_id
    AND hp.party_type          IN ('PERSON','ORGANIZATION')
    AND hp.status               ='A'
    AND hp.party_id             = hca.party_id
    AND hca.status              ='A'
    AND hp.party_id             =hc.owner_table_id(+)
    AND hc.owner_table_name(+)  ='HZ_PARTIES'
    AND hp.party_id             =hca.cust_account_id
    AND hc.contact_point_type(+)='PHONE'
    AND hc.primary_flag(+)      ='Y'
    AND hc.status(+)            ='A'
    AND arl.lookup_type(+)      = 'PHONE_LINE_TYPE'
    AND arl.lookup_code(+)      = hc.phone_line_type
    AND hp.party_name='Business World'
    AND csi.incident_date BETWEEN to_date('01-JAN-2000','DD-MON-YYYY') AND to_date('31-DEC-2008','DD-MON-YYYY')
    AND cis.incident_severity_id=csi.incident_severity_id
    AND mtl.inventory_item_id=csi.inventory_item_id
    GROUP BY hp.party_name,
      csi.incident_number,
      csi.incident_date,
      csi.close_date,
      csi.summary,
      csi.problem_code,
      csi.incident_address,
      cis.name,
      csi.INCIDENT_COUNTRY,
      mtl.description,
      to_char(csi.incident_date,'MON-YYYY')
    Am code
        public void initQuery(String paramString1, String paramString2)
              SrReportVOImpl vo=getSrReportVO1();
            if ((paramString1 != null) && (!("".equals(paramString1.trim()))) && (paramString2 != null) && (!("".equals(paramString2.trim()))))
              vo.setWhereClauseParams(null);
              vo.setWhereClauseParam(0, paramString1);
              vo.setWhereClauseParam(1, paramString2);
              vo.executeQuery();
        public XMLNode getPrintDataXML()
        //SrReportVOImpl vo=getSrReportVO1();
        OAViewObject vo = (OAViewObject)findViewObject("SrReportVO1");
        //vo.initQuery(s,s1);
        XMLNode xmlNode=(XMLNode) vo.writeXML(4,XMLInterface.XML_OPT_ALL_ROWS);
            return xmlNode;
    CO code
          SrAMImpl am=(SrAMImpl)pageContext.getApplicationModule(webBean);
          if(pageContext.getParameter("Go")!=null)
              //am.searchSrDetails(pageContext,webBean);   
               String s=pageContext.getParameter("CustomerName");
               String s1=pageContext.getParameter("RunReportDate");
                   am.initQuery(s,s1);
                 // Get the HttpServletResponse object from the PageContext. The report output is written to HttpServletResponse.
                 DataObject sessionDictionary = (DataObject)pageContext.getNamedDataObject("_SessionParameters");
                 HttpServletResponse response = (HttpServletResponse)sessionDictionary.selectValue(null,"HttpServletResponse");
                 try {
                 ServletOutputStream os = response.getOutputStream();
                 // Set the Output Report File Name and Content Type
                 String contentDisposition ="attachment;filename=ServiceReport.pdf";
                 response.setHeader("Content-Disposition",contentDisposition);
                 response.setContentType("application/pdf");
                     Serializable param[]={pageContext.getParameter("CustomerName"),pageContext.getParameter("RunReportDate")};
                     System.out.println("hiiii 12");
                     // Get the Data XML Output as the XMLNode
                     XMLNode xmlNode = (XMLNode) am.invokeMethod("getPrintDataXML",param);
                     System.out.println("hiiii 13");
                     System.out.println(xmlNode.toString());
                     System.out.println("hiiii 14");
                 // Get the Data XML File as the XMLNode
                 ByteArrayOutputStream outputStream = new ByteArrayOutputStream();
                 xmlNode.print(outputStream);
                 ByteArrayInputStream inputStream = new ByteArrayInputStream(outputStream.toByteArray());
                 ByteArrayOutputStream pdfFile = new ByteArrayOutputStream();
                 //Generate the PDF Report.
                 TemplateHelper.processTemplate(
                 ((OADBTransactionImpl)pageContext.getApplicationModule(webBean).getOADBTransaction()).getAppsContext(),
                 APP_NAME,
                 TEMPLATE_CODE,
                 ((OADBTransactionImpl)pageContext.getApplicationModule(webBean).getOADBTransaction()).getUserLocale().getLanguage(),
                 ((OADBTransactionImpl)pageContext.getApplicationModule(webBean).getOADBTransaction()).getUserLocale().getCountry(),
                 inputStream,
                 TemplateHelper.OUTPUT_TYPE_PDF,
                 null,
                 pdfFile);
                 // Write the PDF Report to the HttpServletResponse object and flush.
                 byte[] b = pdfFile.toByteArray();
                 response.setContentLength(b.length);
                 os.write(b, 0, b.length);
                 os.flush();
                 os.close();
                 pdfFile.flush();
                 pdfFile.close();
                 catch(Exception e)
                 response.setContentType("text/html");
                 throw new OAException(e.getMessage(), OAException.ERROR);
                 pageContext.setDocumentRendered(false);
                   System.out.println("hiiii 13");
          if(pageContext.getParameter("Clear")!=null)
              am.ClearFields(pageContext,webBean);
          }can any one tell me how to set the bind parameters or setting parameter

    Hi,
    Could not understand your problem exactly. DId you try adding bind variables in the query like below:
    AND hp.party_name='Business World'
    AND csi.incident_date BETWEEN to_date('01-JAN-2000','DD-MON-YYYY') AND to_date('31-DEC-2008','DD-MON-YYYY')
    change to
    AND hp.party_name=:1
    AND csi.incident_date BETWEEN :2 AND :3
    Please note you will need three bind variables. Second and third for SR Dates.
    ~Amol

  • How to set the isolation level on Entity EJBs

    I am using 10.1.3.3 of the OC4J app server.
    I am creating an application that uses EJB 2.1.
    I am trying to set the isolation levels on the EJBs to either serializable or repeatable read.
    When i deploy the EAR file from the OC4J admin console, i can set the isolation level property on the EJB's however when i inspect the orion-ejb-jar.xml file I do not see the isolation level being set. Furthermore, i tried to manually change the isolation setting by editing the orion-ejb-jar.xml and adding the isolation="serialiable" attribute on the entity bean descriptor. I then stopped and restarted the server. I noticed that my change was no longer in the file.
    Can someone please let me know how to solve this problem and set the isolation level on Entity EJBs . Thanks

    I find it at ejb.pdf from BEA.
              The transaction-isolation stanza can contain the elements shown here:
              <transaction-isolation>
              <isolation-level>Serializable</isolation-level>
              <method>
              <description>...</description>
              <ejb-name>...</ejb-name>
              <method-intf>...</method-intf>
              <method-name>...</method-name>
              <method-params>...</method-params>
              </method>
              </transaction-isolation>
              "Hyun Min" <[email protected]> wrote in message
              news:3c4e7a83$[email protected]..
              > Hi!
              >
              > I have a question.
              > How to set the transaction isolation level using CMT in descriptor?
              >
              > The Isolation level not supported in CMT?
              >
              > Thanks.
              > Hyun Min
              >
              >
              

Maybe you are looking for