How to set the EKET-FIXKZ directly?
If you make in transaction ME38 manual changes to a line of a scheduling agreement delivery schedule that was created via the materials planning process or if you create a scheduling line manually the EKET-FIXKZ will be set to 'X'. Alternativly you can use BAPI_SAG_CHANGE. If you transfer a changed quantity to a item line the EKET-FIXKZ will be set too.
I have to set certain scheduling line to EKET-FIXKZ = 'X' and at later times to EKET-FIXKZ = space (and vice versa).
I should not use "UPDATE EKET SET FIXKZ = 'X'.".
Does anybody know a way to change the EKET-FIXKZ directly with standard functions?
Hi,
The initial entry point Navigation Node after first login is the Navigation Node with lowest Sort priority number.
The sort priority of a Navigation Node can be between 0 and 100.
So value 0 means priority undefined, so you can use from 0.1 till 100 to set the priority, where 0.1 will be the first node that will be shown after first login. Ofcourse you can also use 1 till 100, no need to break down to decimals.
From NW7.0 SP14 there is also a new feature which sorts Navigation Node Alphabetically, so you can also define this setting, which then can be combined with sort priority.
Check this how to Define the Sort Sequence of Navigation Nodes:
http://help.sap.com/saphelp_nw70/helpdata/EN/92/3e703e632c7937e10000000a114084/frameset.htm
Regards,
Praveen Gudapati
Similar Messages
-
Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files on iMac 20inch but still have them on the TC for future reference..eg some movies on iTunes. I want to directly save them on the drive so I can delete them from iTunes and gain some storage. (Ps on iMac 20 inch (it's almost full - 320 GB) when I enter time machine, a tab comes up on finder which reads "Time Machine backups" it's able to be ejected like a disc or a connected device. On the iMac 20 inch, I dragged some files onto there as if using it like a hard drive. Is this the correct method? Then I went to my 27inch iMac and saw the "Time Machine Backups" hoping to see the files I dragged from the 20inch iMac. But the files were not there except a folder that said "Backups.backupdb". Can someone help me?
It's not a good idea to use a network disk for both Time Machine backups and other things. By design Time Machine will eventually consume all the space on its output disk, which will then cause problem for your other files. I'd store those other files on an external disk connected to the Time Capsule. The problem with that is that Time Machine will only back up files that are local to your Mac. That means that you'll only have one copy of the files on or attached to your Time Capsule.
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that. -
Epson Artisan 810 in duplex printing, reverses the second page, so that it is upside down in relation to the first page. Does anyone know how to set the second page.... i.e the reverse side of the page.....in the correct direction?
It worked perfectly last week, now there are problems.
Thanks for any advice.Epson Artisan 810 in duplex printing, reverses the second page, so that it is upside down in relation to the first page. Does anyone know how to set the second page.... i.e the reverse side of the page.....in the correct direction?
It worked perfectly last week, now there are problems.
Thanks for any advice. -
How to set the router and play the Command & Conquer using direct IP mode?
My router is WRT54GFirmware Version: v3.03.1
How to set the router and play the Command & Conquer using direct IP mode with other computer?Hi, when you say direct IP mode, what do you mean ? do you wanna play the game online or on the LAN ??
can you give a few more details. -
How to set the PATH in Terminal?
As a newbie to Bash and the Terminal, in connection with installing a new version of Ruby and various add-ons, I have been messing around with changing the PATH via various methods I've found on the internet, and trying to add a new directory to my PATH. Unfortunately, I cannot figure out how to set the PATH correctly. Here is what I understand so far:
1. Bash first looks to ".bash_profile" in the home directory for PATH settings.
2. If none, Bash then looks to ".bash_login" for PATH settings.
3. If none, Bash then looks to ".profile".
4. If none, Bash then looks to a system file in "/etc/profile" for default PATH settings.
5. For a new shell after login, Bash looks for a ".bashrc" file.
I cannot find any of the above files (I have Finder set to show hidden files already). Somehow, following some instructions from the internet without really knowing what I was doing over the past week I have set my PATH as follows:
/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/Users/*****/src:/usr/X11/bin
but I cannot find the file that is setting this PATH. I have tried creating a new ".bash_profile" shell file and putting it in various places such as "/bin" and "/usr/bin" but the file is not being read.
* As a temporary workaround I tried using the command "source .bash_profile" upon login to set the PATH using the .bash_profile file that I created, but it does not work.
* I am able to temporarily alter the path using the command "PATH=/usr/local/bin:$PATH" but this only lasts for an active shell; when I close out and reopen a new shell, it reverts to the default.
So my questions are:
Is it correct that there is a "/etc/profile" somewhere that is setting the default PATH? If so where is it? Should I alter it, or create a new ".bash_profile" somewhere to set the PATH? If not, where is my PATH being set? If I should create a new ".bash_profile", what exactly should go in it?
Thanks in advance for any assistance.... I created a new ".bash_profile" file directly under my home directory and it worked like a charm. Below is the content of the file:
"PATH=/usr/local/bin:/bin/:/sbin/:/usr/bin/:/usr/sbin/:/Users/******/Ruby:/Users/*******/src:/Users/******/Java Programs/"
What are the "..."'s? Is that just you, or is the contents of the file actually inside of double quotes?
is there an 'export PATH' also in the file? As in
PATH=/usr/local/bin:/bin/:/sbin/:/usr/bin/:/usr/sbin/:/Users/******/Ruby:/Users/*******/src:/Users/******/Java Programs/
export PATH
And did you either restart your Terminal session so your .bash_profile was read, or issue a 'source .bash_profile' command to execute the .bash_profile after your change?
The only remaining problem is that from the home directory, I'm unable to directly run programs in the above-designated subdirectories (without first navigating to the subdirectory containing the file. Is there something wrong with the syntax or order of the directories I put in the path?
For example: there is a file called "newprogram.rb" in the "Ruby" directory listed above. I should be able to execute it from the home directory using "ruby newprogram.rb" but it does not work. The same command works fine from within the "Ruby" directory.
Does the 'ruby' command search PATH to find its scripts?
Have you read the "man ruby" man page to see if it talks about PATH?
A common Unix feature is that programs and scripts with the executable bit set, and are located in a PATH directory, will be run if you just type their names.
For example, if the first line of newprogram.rb script starts with
#!/usr/bin/ruby
and if the script is executable
chmod +x newprogram.rb
And if it is in a directory in PATH, then just typing
newprogram.rb
should run your perl script using /usr/bin/ruby. If you want to use a different version of Ruby, then change the #! line so it point to your version of Ruby. Or if your version of Ruby is found earlier in PATH then the /usr/bin/ruby, you can use
#!/usr/bin/env ruby
as your script's first line which will search PATH for 'ruby' and use the first one it finds.
Message was edited by: BobHarris -
Sun ONE Studio 4 aka Forte: How to set the output path for classes ?
Help !
Beginner's question:
Sun ONE Studio 4 aka Forte:
How to set the output path for classes ?
As default, the class files are created in the same directory as the
sources.
In opposite, both JBuilder and Together support that there is a tree
with the sources and another tree with the classes.
The first answer I got was "not possible with Forte, but just if you write your own "ANT Build script" !
a) Please point me to a ready-to-use ANT script for this purpose, if such is available
b) Is using ANT instead of the MAKE as comfortable ? Besides the separation of sourcecode and classes, I would like to keep everything else to be the same, i.e. I don�t want to edit the ANT file if I enlarge the project by directories or files.
Tia
Sincerely
RolfYou can set S1S's options to place newly created .class files in a specific location.
Identify the compiler that is being used - Open the S1S's Tools/Options window, expand Editing and select Java Sources. Note the Default Compiler value. (If it's one if the Ant options, you use Ant to specify this option, not S1S.)
Open the S1S's Tools/Options window, expand Building/Compiler Types and select the appropriate compiler.
The Properties tab of the compiler has the property Target, which sets the filesystem where the compiler output is directed. If you choose <not set>, the .class files are written to their source directory.
When you set the Target, your change affects all classes that use this compiler.
Very few options can't be set in S1S; the challenge is finding out where they're set! -
How to set the path variable on Windows ME?
I want to get a friend of mine to start using java the only problem is that we both dont know how to set the path variable in Windows ME. I cant seem to find any instructions on it for ME. So if someone could please tell me how or give me a llnk to directions for Windows ME. Thanks.
Refer to the Installation Instructions for the package that you installed - I believe #5 if the instructions has the information. A link to the instructions is at the page you installed from.
-
How to set the default selection screen
I modified screen using screen-input = 0.
then how to set the screen-input = 1.
that is how to make that field input enable.
if use the statement screen-input = 1 directly it is giving 2 fields to enter valueIn the PBO / AT SELECTION-SCREEN OUPUT
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF screen-name = <your FIELD>. " Fields by name
* IF SCREEN-GROUP1 = <your group of fields>. " Fields with MODIF ID
IF <test>.
screen-input = 1. " For input enable
ELSE.
screen-input = 0. " For input disable
ENDIF.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Regards -
How to set the view privilege of a portlet?
Dear all,
I would like to ask how to set the view privilege of a portlet (which is located on the Intranet homepage) to only a group of users?
As far as I know, I can create a tab with view privilege to address the about scenario. But is it possible to directly set the view privilege to the portlet ?
thanks
George (HK)
Welcome to my photo albums at http://community.webshots.com/user/GeorgeLee80
Message was edited by:
georgelkhOK, you got me there George. I don't know where you can set view rights to an out of box portlet. So how about a different approach?
1) Create a blank page with no nav bar or anything else
2) Assign the group you want to see the notifications portlet view rights on the page
3) Make sure the show as portlet check box is checked on the Optional tab in the page properties
4) Add the notifications portlet to the page
5) Ensure the portlet settings are how you desire in terms of what notifications to show and the region settings are how they should be in terms of border, headers, etc
6) Edit the page where you want the notifications portlet to be shown and add the page portlet you just created instead of the notification portlet
This should achieve what you seek without having to dig into out-of-box portlets.
Rgds/Mark M. -
How to set the correct shared pool size and db_buffer_cache using awr
Hi All,
I want to how to set the correct size for shared_pool_size and db_cache_size using shared pool advisory and buffer pool advisory of awr report. I have paste the shared and buffer pool advisory of awr report.
Shared Pool Advisory
* SP: Shared Pool Est LC: Estimated Library Cache Factr: Factor
* Note there is often a 1:Many correlation between a single logical object in the Library Cache, and the physical number of memory objects associated with it. Therefore comparing the number of Lib Cache objects (e.g. in v$librarycache), with the number of Lib Cache Memory Objects is invalid.
Shared Pool Size(M) SP Size Factr Est LC Size (M) Est LC Mem Obj Est LC Time Saved (s) Est LC Time Saved Factr Est LC Load Time (s) Est LC Load Time Factr Est LC Mem Obj Hits (K)
4,096 1.00 471 25,153 184,206 1.00 149 1.00 9,069
4,736 1.16 511 27,328 184,206 1.00 149 1.00 9,766
5,248 1.28 511 27,346 184,206 1.00 149 1.00 9,766
5,760 1.41 511 27,346 184,206 1.00 149 1.00 9,766
6,272 1.53 511 27,346 184,206 1.00 149 1.00 9,766
6,784 1.66 511 27,346 184,206 1.00 149 1.00 9,766
7,296 1.78 511 27,346 184,206 1.00 149 1.00 9,766
7,808 1.91 511 27,346 184,206 1.00 149 1.00 9,766
8,320 2.03 511 27,346 184,206 1.00 149 1.00 9,766
Buffer Pool Advisory
* Only rows with estimated physical reads >0 are displayed
* ordered by Block Size, Buffers For Estimate
P Size for Est (M) Size Factor Buffers (thousands) Est Phys Read Factor Estimated Phys Reads (thousands) Est Phys Read Time Est %DBtime for Rds
D 4,096 0.10 485 1.02 1,002 1 0.00
D 8,192 0.20 970 1.00 987 1 0.00
D 12,288 0.30 1,454 1.00 987 1 0.00
D 16,384 0.40 1,939 1.00 987 1 0.00
D 20,480 0.50 2,424 1.00 987 1 0.00
D 24,576 0.60 2,909 1.00 987 1 0.00
D 28,672 0.70 3,394 1.00 987 1 0.00
D 32,768 0.80 3,878 1.00 987 1 0.00
D 36,864 0.90 4,363 1.00 987 1 0.00
D 40,960 1.00 4,848 1.00 987 1 0.00
D 45,056 1.10 5,333 1.00 987 1 0.00
D 49,152 1.20 5,818 1.00 987 1 0.00
D 53,248 1.30 6,302 1.00 987 1 0.00
D 57,344 1.40 6,787 1.00 987 1 0.00
D 61,440 1.50 7,272 1.00 987 1 0.00
D 65,536 1.60 7,757 1.00 987 1 0.00
D 69,632 1.70 8,242 1.00 987 1 0.00
D 73,728 1.80 8,726 1.00 987 1 0.00
D 77,824 1.90 9,211 1.00 987 1 0.00
D 81,920 2.00 9,696 1.00 987 1 0.00
My shared pool size is 4gb and db_cache_size is 40Gb.
Please help me in configuring the correct size for this.
Thanks and Regards,Hi ,
Actually batch load is taking too much time.
Please find below the 1 hr awr report
Snap Id Snap Time Sessions Cursors/Session
Begin Snap: 6557 27-Nov-11 16:00:06 126 1.3
End Snap: 6558 27-Nov-11 17:00:17 130 1.6
Elapsed: 60.17 (mins)
DB Time: 34.00 (mins)
Report Summary
Cache Sizes
Begin End
Buffer Cache: 40,960M 40,960M Std Block Size: 8K
Shared Pool Size: 4,096M 4,096M Log Buffer: 25,908K
Load Profile
Per Second Per Transaction Per Exec Per Call
DB Time(s): 0.6 1.4 0.00 0.07
DB CPU(s): 0.5 1.2 0.00 0.06
Redo size: 281,296.9 698,483.4
Logical reads: 20,545.6 51,016.4
Block changes: 1,879.5 4,667.0
Physical reads: 123.7 307.2
Physical writes: 66.4 164.8
User calls: 8.2 20.4
Parses: 309.4 768.4
Hard parses: 8.5 21.2
W/A MB processed: 1.7 4.3
Logons: 0.7 1.6
Executes: 1,235.9 3,068.7
Rollbacks: 0.0 0.0
Transactions: 0.4
Instance Efficiency Percentages (Target 100%)
Buffer Nowait %: 100.00 Redo NoWait %: 100.00
Buffer Hit %: 99.66 In-memory Sort %: 100.00
Library Hit %: 99.19 Soft Parse %: 97.25
Execute to Parse %: 74.96 Latch Hit %: 99.97
Parse CPU to Parse Elapsd %: 92.41 % Non-Parse CPU: 98.65
Shared Pool Statistics
Begin End
Memory Usage %: 80.33 82.01
% SQL with executions>1: 90.90 86.48
% Memory for SQL w/exec>1: 90.10 86.89
Top 5 Timed Foreground Events
Event Waits Time(s) Avg wait (ms) % DB time Wait Class
DB CPU 1,789 87.72
db file sequential read 27,531 50 2 2.45 User I/O
db file scattered read 26,322 30 1 1.47 User I/O
row cache lock 1,798 20 11 0.96 Concurrency
OJVM: Generic 36 15 421 0.74 Other
Host CPU (CPUs: 24 Cores: 12 Sockets: )
Load Average Begin Load Average End %User %System %WIO %Idle
0.58 1.50 2.8 0.7 0.1 96.6
Instance CPU
%Total CPU %Busy CPU %DB time waiting for CPU (Resource Manager)
2.2 63.6 0.0
Memory Statistics
Begin End
Host Mem (MB): 131,072.0 131,072.0
SGA use (MB): 50,971.4 50,971.4
PGA use (MB): 545.5 1,066.3
% Host Mem used for SGA+PGA: 39.30 39.70
RAC Statistics
Begin End
Number of Instances: 2 2
Global Cache Load Profile
Per Second Per Transaction
Global Cache blocks received: 3.09 7.68
Global Cache blocks served: 1.86 4.62
GCS/GES messages received: 78.64 195.27
GCS/GES messages sent: 53.82 133.65
DBWR Fusion writes: 0.52 1.30
Estd Interconnect traffic (KB) 65.50
Global Cache Efficiency Percentages (Target local+remote 100%)
Buffer access - local cache %: 99.65
Buffer access - remote cache %: 0.02
Buffer access - disk %: 0.34
Global Cache and Enqueue Services - Workload Characteristics
Avg global enqueue get time (ms): 0.0
Avg global cache cr block receive time (ms): 1.7
Avg global cache current block receive time (ms): 1.0
Avg global cache cr block build time (ms): 0.0
Avg global cache cr block send time (ms): 0.0
Global cache log flushes for cr blocks served %: 1.4
Avg global cache cr block flush time (ms): 0.9
Avg global cache current block pin time (ms): 0.0
Avg global cache current block send time (ms): 0.0
Global cache log flushes for current blocks served %: 0.1
Avg global cache current block flush time (ms): 0.0
Global Cache and Enqueue Services - Messaging Statistics
Avg message sent queue time (ms): 0.0
Avg message sent queue time on ksxp (ms): 0.4
Avg message received queue time (ms): 0.5
Avg GCS message process time (ms): 0.0
Avg GES message process time (ms): 0.0
% of direct sent messages: 79.13
% of indirect sent messages: 17.10
% of flow controlled messages: 3.77
Cluster Interconnect
Begin End
Interface IP Address Pub Source IP Pub Src
en9 10.51.10.61 N Oracle Cluster Repository
Main Report
* Report Summary
* Wait Events Statistics
* SQL Statistics
* Instance Activity Statistics
* IO Stats
* Buffer Pool Statistics
* Advisory Statistics
* Wait Statistics
* Undo Statistics
* Latch Statistics
* Segment Statistics
* Dictionary Cache Statistics
* Library Cache Statistics
* Memory Statistics
* Streams Statistics
* Resource Limit Statistics
* Shared Server Statistics
* init.ora Parameters
More RAC Statistics
* RAC Report Summary
* Global Messaging Statistics
* Global CR Served Stats
* Global CURRENT Served Stats
* Global Cache Transfer Stats
* Interconnect Stats
* Dynamic Remastering Statistics
Back to Top
Statistic Name Time (s) % of DB Time
sql execute elapsed time 1,925.20 94.38
DB CPU 1,789.38 87.72
connection management call elapsed time 99.65 4.89
PL/SQL execution elapsed time 89.81 4.40
parse time elapsed 46.32 2.27
hard parse elapsed time 25.01 1.23
Java execution elapsed time 21.24 1.04
PL/SQL compilation elapsed time 11.92 0.58
failed parse elapsed time 9.37 0.46
hard parse (sharing criteria) elapsed time 8.71 0.43
sequence load elapsed time 0.06 0.00
repeated bind elapsed time 0.02 0.00
hard parse (bind mismatch) elapsed time 0.01 0.00
DB time 2,039.77
background elapsed time 122.00
background cpu time 113.42
Statistic Value End Value
NUM_LCPUS 0
NUM_VCPUS 0
AVG_BUSY_TIME 12,339
AVG_IDLE_TIME 348,838
AVG_IOWAIT_TIME 221
AVG_SYS_TIME 2,274
AVG_USER_TIME 9,944
BUSY_TIME 299,090
IDLE_TIME 8,375,051
IOWAIT_TIME 6,820
SYS_TIME 57,512
USER_TIME 241,578
LOAD 1 2
OS_CPU_WAIT_TIME 312,200
PHYSICAL_MEMORY_BYTES 137,438,953,472
NUM_CPUS 24
NUM_CPU_CORES 12
GLOBAL_RECEIVE_SIZE_MAX 1,310,720
GLOBAL_SEND_SIZE_MAX 1,310,720
TCP_RECEIVE_SIZE_DEFAULT 16,384
TCP_RECEIVE_SIZE_MAX 9,223,372,036,854,775,807
TCP_RECEIVE_SIZE_MIN 4,096
TCP_SEND_SIZE_DEFAULT 16,384
TCP_SEND_SIZE_MAX 9,223,372,036,854,775,807
TCP_SEND_SIZE_MIN 4,096
Back to Wait Events Statistics
Back to Top
Operating System Statistics - Detail
Snap Time Load %busy %user %sys %idle %iowait
27-Nov 16:00:06 0.58
27-Nov 17:00:17 1.50 3.45 2.79 0.66 96.55 0.08
Back to Wait Events Statistics
Back to Top
Foreground Wait Class
* s - second, ms - millisecond - 1000th of a second
* ordered by wait time desc, waits desc
* %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
* Captured Time accounts for 95.7% of Total DB time 2,039.77 (s)
* Total FG Wait Time: 163.14 (s) DB CPU time: 1,789.38 (s)
Wait Class Waits %Time -outs Total Wait Time (s) Avg wait (ms) %DB time
DB CPU 1,789 87.72
User I/O 61,229 0 92 1 4.49
Other 102,743 40 31 0 1.50
Concurrency 3,169 10 24 7 1.16
Cluster 58,920 0 11 0 0.52
System I/O 45,407 0 6 0 0.29
Configuration 107 7 1 5 0.03
Commit 383 0 0 1 0.01
Network 15,275 0 0 0 0.00
Application 52 8 0 0 0.00
Back to Wait Events Statistics
Back to Top
Foreground Wait Events
* s - second, ms - millisecond - 1000th of a second
* Only events with Total Wait Time (s) >= .001 are shown
* ordered by wait time desc, waits desc (idle events last)
* %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
Event Waits %Time -outs Total Wait Time (s) Avg wait (ms) Waits /txn % DB time
db file sequential read 27,531 0 50 2 18.93 2.45
db file scattered read 26,322 0 30 1 18.10 1.47
row cache lock 1,798 0 20 11 1.24 0.96
OJVM: Generic 36 42 15 421 0.02 0.74
db file parallel read 394 0 7 19 0.27 0.36
control file sequential read 22,248 0 6 0 15.30 0.28
reliable message 4,439 0 4 1 3.05 0.18
gc current grant busy 7,597 0 3 0 5.22 0.16
PX Deq: Slave Session Stats 2,661 0 3 1 1.83 0.16
DFS lock handle 3,208 0 3 1 2.21 0.16
direct path write temp 4,842 0 3 1 3.33 0.15
library cache load lock 39 0 3 72 0.03 0.14
gc cr multi block request 37,008 0 3 0 25.45 0.14
IPC send completion sync 5,451 0 2 0 3.75 0.10
gc cr block 2-way 4,669 0 2 0 3.21 0.09
enq: PS - contention 3,183 33 1 0 2.19 0.06
gc cr grant 2-way 5,151 0 1 0 3.54 0.06
direct path read temp 1,722 0 1 1 1.18 0.05
gc current block 2-way 1,807 0 1 0 1.24 0.03
os thread startup 6 0 1 108 0.00 0.03
name-service call wait 12 0 1 47 0.01 0.03
PX Deq: Signal ACK RSG 2,046 50 0 0 1.41 0.02
log file switch completion 3 0 0 149 0.00 0.02
rdbms ipc reply 3,610 0 0 0 2.48 0.02
gc current grant 2-way 1,432 0 0 0 0.98 0.02
library cache pin 903 32 0 0 0.62 0.02
PX Deq: reap credit 35,815 100 0 0 24.63 0.01
log file sync 383 0 0 1 0.26 0.01
Disk file operations I/O 405 0 0 0 0.28 0.01
library cache lock 418 3 0 0 0.29 0.01
kfk: async disk IO 23,159 0 0 0 15.93 0.01
gc current block busy 4 0 0 35 0.00 0.01
gc current multi block request 1,206 0 0 0 0.83 0.01
ges message buffer allocation 38,526 0 0 0 26.50 0.00
enq: FB - contention 131 0 0 0 0.09 0.00
undo segment extension 8 100 0 6 0.01 0.00
CSS initialization 8 0 0 6 0.01 0.00
SQL*Net message to client 14,600 0 0 0 10.04 0.00
enq: HW - contention 96 0 0 0 0.07 0.00
CSS operation: action 8 0 0 4 0.01 0.00
gc cr block busy 33 0 0 1 0.02 0.00
latch free 30 0 0 1 0.02 0.00
enq: TM - contention 49 6 0 0 0.03 0.00
enq: JQ - contention 19 100 0 1 0.01 0.00
SQL*Net more data to client 666 0 0 0 0.46 0.00
asynch descriptor resize 3,179 100 0 0 2.19 0.00
latch: shared pool 3 0 0 3 0.00 0.00
CSS operation: query 24 0 0 0 0.02 0.00
PX Deq: Signal ACK EXT 72 0 0 0 0.05 0.00
KJC: Wait for msg sends to complete 269 0 0 0 0.19 0.00
latch: object queue header operation 4 0 0 1 0.00 0.00
gc cr block congested 5 0 0 0 0.00 0.00
utl_file I/O 11 0 0 0 0.01 0.00
enq: TO - contention 3 33 0 0 0.00 0.00
SQL*Net message from client 14,600 0 219,478 15033 10.04
jobq slave wait 7,726 100 3,856 499 5.31
PX Deq: Execution Msg 10,556 19 50 5 7.26
PX Deq: Execute Reply 2,946 31 27 9 2.03
PX Deq: Parse Reply 3,157 35 3 1 2.17
PX Deq: Join ACK 2,976 28 2 1 2.05
PX Deq Credit: send blkd 7 14 0 4 0.00
Back to Wait Events Statistics
Back to Top
Background Wait Events
* ordered by wait time desc, waits desc (idle events last)
* Only events with Total Wait Time (s) >= .001 are shown
* %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
Event Waits %Time -outs Total Wait Time (s) Avg wait (ms) Waits /txn % bg time
os thread startup 140 0 13 90 0.10 10.35
db file parallel write 8,233 0 6 1 5.66 5.08
log file parallel write 3,906 0 6 1 2.69 4.62
log file sequential read 350 0 5 16 0.24 4.49
control file sequential read 13,737 0 5 0 9.45 3.72
DFS lock handle 2,990 27 2 1 2.06 1.43
db file sequential read 921 0 2 2 0.63 1.39
SQL*Net break/reset to client 18 0 1 81 0.01 1.19
control file parallel write 2,455 0 1 1 1.69 1.12
ges lms sync during dynamic remastering and reconfig 24 100 1 50 0.02 0.98
library cache load lock 35 0 1 24 0.02 0.68
ASM file metadata operation 3,483 0 1 0 2.40 0.65
enq: CO - master slave det 1,203 100 1 0 0.83 0.46
kjbdrmcvtq lmon drm quiesce: ping completion 9 0 1 62 0.01 0.46
enq: WF - contention 11 0 0 35 0.01 0.31
CGS wait for IPC msg 32,702 100 0 0 22.49 0.19
gc object scan 28,788 100 0 0 19.80 0.15
row cache lock 535 0 0 0 0.37 0.14
library cache pin 370 55 0 0 0.25 0.12
ksxr poll remote instances 19,119 100 0 0 13.15 0.11
name-service call wait 6 0 0 19 0.00 0.10
gc current block 2-way 304 0 0 0 0.21 0.09
gc cr block 2-way 267 0 0 0 0.18 0.08
gc cr grant 2-way 355 0 0 0 0.24 0.08
ges LMON to get to FTDONE 3 100 0 24 0.00 0.06
enq: CF - contention 145 76 0 0 0.10 0.05
PX Deq: reap credit 8,842 100 0 0 6.08 0.05
reliable message 126 0 0 0 0.09 0.05
db file scattered read 19 0 0 3 0.01 0.05
library cache lock 162 1 0 0 0.11 0.04
latch: shared pool 2 0 0 27 0.00 0.04
Disk file operations I/O 504 0 0 0 0.35 0.04
gc current grant busy 148 0 0 0 0.10 0.04
gcs log flush sync 84 0 0 1 0.06 0.04
ges message buffer allocation 24,934 0 0 0 17.15 0.02
enq: CR - block range reuse ckpt 83 0 0 0 0.06 0.02
latch free 22 0 0 1 0.02 0.02
CSS operation: action 13 0 0 2 0.01 0.02
CSS initialization 4 0 0 6 0.00 0.02
direct path read 1 0 0 21 0.00 0.02
rdbms ipc reply 153 0 0 0 0.11 0.01
db file parallel read 2 0 0 8 0.00 0.01
direct path write 5 0 0 3 0.00 0.01
gc current multi block request 49 0 0 0 0.03 0.01
gc current block busy 5 0 0 2 0.00 0.01
enq: PS - contention 24 50 0 0 0.02 0.01
gc cr multi block request 54 0 0 0 0.04 0.01
ges generic event 1 100 0 10 0.00 0.01
gc current grant 2-way 35 0 0 0 0.02 0.01
kfk: async disk IO 183 0 0 0 0.13 0.01
Log archive I/O 3 0 0 2 0.00 0.01
gc buffer busy acquire 2 0 0 3 0.00 0.00
LGWR wait for redo copy 123 0 0 0 0.08 0.00
IPC send completion sync 18 0 0 0 0.01 0.00
enq: TA - contention 11 0 0 0 0.01 0.00
read by other session 2 0 0 2 0.00 0.00
enq: TM - contention 9 89 0 0 0.01 0.00
latch: ges resource hash list 135 0 0 0 0.09 0.00
PX Deq: Slave Session Stats 12 0 0 0 0.01 0.00
KJC: Wait for msg sends to complete 89 0 0 0 0.06 0.00
enq: TD - KTF dump entries 8 0 0 0 0.01 0.00
enq: US - contention 7 0 0 0 0.00 0.00
CSS operation: query 12 0 0 0 0.01 0.00
enq: TK - Auto Task Serialization 6 100 0 0 0.00 0.00
PX Deq: Signal ACK RSG 24 50 0 0 0.02 0.00
log file single write 6 0 0 0 0.00 0.00
enq: WL - contention 2 100 0 1 0.00 0.00
ADR block file read 13 0 0 0 0.01 0.00
ADR block file write 5 0 0 0 0.00 0.00
latch: object queue header operation 1 0 0 1 0.00 0.00
gc cr block busy 1 0 0 1 0.00 0.00
rdbms ipc message 103,276 67 126,259 1223 71.03
PX Idle Wait 6,467 67 12,719 1967 4.45
wait for unread message on broadcast channel 7,240 100 7,221 997 4.98
gcs remote message 218,809 84 7,213 33 150.49
DIAG idle wait 203,228 95 7,185 35 139.77
shared server idle wait 121 100 3,630 30000 0.08
ASM background timer 3,343 0 3,611 1080 2.30
Space Manager: slave idle wait 723 100 3,610 4993 0.50
heartbeat monitor sleep 722 100 3,610 5000 0.50
ges remote message 73,089 52 3,609 49 50.27
dispatcher timer 66 88 3,608 54660 0.05
pmon timer 1,474 82 3,607 2447 1.01
PING 1,487 19 3,607 2426 1.02
Streams AQ: qmn slave idle wait 125 0 3,594 28754 0.09
Streams AQ: qmn coordinator idle wait 250 50 3,594 14377 0.17
smon timer 18 50 3,505 194740 0.01
JOX Jit Process Sleep 73 100 976 13370 0.05
class slave wait 56 0 605 10806 0.04
KSV master wait 2,215 98 1 0 1.52
SQL*Net message from client 109 0 0 2 0.07
PX Deq: Parse Reply 27 44 0 1 0.02
PX Deq: Join ACK 30 40 0 1 0.02
PX Deq: Execute Reply 20 30 0 0 0.01
Streams AQ: RAC qmn coordinator idle wait 259 100 0 0 0.18
Back to Wait Events Statistics
Back to Top
Wait Event Histogram
* Units for Total Waits column: K is 1000, M is 1000000, G is 1000000000
* % of Waits: value of .0 indicates value was <.05%; value of null is truly 0
* % of Waits: column heading of <=1s is truly <1024ms, >1s is truly >=1024ms
* Ordered by Event (idle events last)
% of Waits
Event Total Waits <1ms <2ms <4ms <8ms <16ms <32ms <=1s >1s
ADR block file read 13 100.0
ADR block file write 5 100.0
ADR file lock 6 100.0
ARCH wait for archivelog lock 3 100.0
ASM file metadata operation 3483 99.6 .1 .1 .2
CGS wait for IPC msg 32.7K 100.0
CSS initialization 12 50.0 50.0
CSS operation: action 21 28.6 9.5 61.9
CSS operation: query 36 86.1 5.6 8.3
DFS lock handle 6198 98.6 1.2 .1 .1
Disk file operations I/O 909 95.7 3.6 .7
IPC send completion sync 5469 99.9 .1 .0 .0
KJC: Wait for msg sends to complete 313 100.0
LGWR wait for redo copy 122 100.0
Log archive I/O 3 66.7 33.3
OJVM: Generic 36 55.6 44.4
PX Deq: Signal ACK EXT 72 98.6 1.4
PX Deq: Signal ACK RSG 2070 99.7 .0 .1 .0 .1
PX Deq: Slave Session Stats 2673 99.7 .2 .1 .0
PX Deq: reap credit 44.7K 100.0
SQL*Net break/reset to client 20 95.0 5.0
SQL*Net message to client 14.7K 100.0
SQL*Net more data from client 32 100.0
SQL*Net more data to client 689 100.0
asynch descriptor resize 3387 100.0
buffer busy waits 2 100.0
control file parallel write 2455 96.6 2.2 .6 .6 .1
control file sequential read 36K 99.4 .3 .1 .1 .1 .1 .0
db file parallel read 397 8.8 .8 5.5 12.6 17.4 46.3 8.6
db file parallel write 8233 85.4 10.3 2.3 1.4 .4 .1
db file scattered read 26.3K 79.2 1.5 8.2 10.5 .6 .1 .0
db file sequential read 28.4K 60.2 3.3 18.0 18.1 .3 .1 .0
db file single write 2 100.0
direct path read 2 50.0 50.0
direct path read temp 1722 95.8 2.8 .1 .5 .8 .1
direct path write 6 83.3 16.7
direct path write temp 4842 96.3 2.7 .5 .2 .0 .0 .2
enq: AF - task serialization 1 100.0
enq: CF - contention 145 99.3 .7
enq: CO - master slave det 1203 98.9 .8 .2
enq: CR - block range reuse ckpt 83 100.0
enq: DR - contention 2 100.0
enq: FB - contention 131 100.0
enq: HW - contention 97 100.0
enq: JQ - contention 19 89.5 10.5
enq: JS - job run lock - synchronize 3 100.0
enq: MD - contention 1 100.0
enq: MW - contention 2 100.0
enq: PS - contention 3207 99.5 .4 .1
enq: TA - contention 11 100.0
enq: TD - KTF dump entries 8 100.0
enq: TK - Auto Task Serialization 6 100.0
enq: TM - contention 58 100.0
enq: TO - contention 3 100.0
enq: TQ - DDL contention 1 100.0
enq: TS - contention 1 100.0
enq: UL - contention 1 100.0
enq: US - contention 7 100.0
enq: WF - contention 11 81.8 18.2
enq: WL - contention 2 50.0 50.0
gc buffer busy acquire 2 50.0 50.0
gc cr block 2-way 4934 99.9 .1 .0 .0
gc cr block busy 35 68.6 31.4
gc cr block congested 6 100.0
gc cr disk read 2 100.0
gc cr grant 2-way 4824 100.0 .0
gc cr grant congested 2 100.0
gc cr multi block request 37.1K 99.8 .2 .0 .0 .0 .0 .0
gc current block 2-way 2134 99.9 .0 .0
gc current block busy 7 14.3 14.3 14.3 28.6 28.6
gc current block congested 2 100.0
gc current grant 2-way 1337 99.9 .1
gc current grant busy 7123 99.2 .2 .2 .0 .0 .3 .1
gc current grant congested 2 100.0
gc current multi block request 1260 99.8 .2
gc object scan 28.8K 100.0
gcs log flush sync 65 95.4 3.1 1.5
ges LMON to get to FTDONE 3 100.0
ges generic event 1 100.0
ges inquiry response 2 100.0
ges lms sync during dynamic remastering and reconfig 24 16.7 29.2 54.2
ges message buffer allocation 63.1K 100.0
kfk: async disk IO 23.3K 100.0 .0 .0
kjbdrmcvtq lmon drm quiesce: ping completion 9 11.1 88.9
ksxr poll remote instances 19.1K 100.0
latch free 52 59.6 40.4
latch: call allocation 2 100.0
latch: gc element 1 100.0
latch: gcs resource hash 1 100.0
latch: ges resource hash list 135 100.0
latch: object queue header operation 5 40.0 40.0 20.0
latch: shared pool 5 40.0 20.0 20.0 20.0
library cache load lock 74 9.5 5.4 8.1 17.6 10.8 13.5 35.1
library cache lock 493 99.2 .4 .4
library cache pin 1186 98.4 .3 1.2 .1
library cache: mutex X 6 100.0
log file parallel write 3897 72.9 1.5 17.1 7.5 .6 .3 .1
log file sequential read 350 4.6 3.1 59.4 30.0 2.9
log file single write 6 100.0
log file switch completion 3 33.3 66.7
log file sync 385 90.4 3.6 4.7 .8 .5
name-service call wait 18 5.6 5.6 5.6 16.7 44.4 22.2
os thread startup 146 100.0
rdbms ipc reply 3763 99.7 .3
read by other session 2 50.0 50.0
reliable message 4565 99.7 .2 .0 .0 .1
row cache lock 2334 99.3 .2 .1 .1 .3
undo segment extension 8 50.0 37.5 12.5
utl_file I/O 11 100.0
ASM background timer 3343 57.0 .3 .1 .1 .1 21.1 21.4
DIAG idle wait 203.2K 3.4 .2 .4 18.0 41.4 14.8 21.8
JOX Jit Process Sleep 73 2.7 97.3
KSV master wait 2213 99.4 .1 .2 .3
PING 1487 81.0 19.0
PX Deq Credit: send blkd 7 57.1 14.3 14.3 14.3
PX Deq: Execute Reply 2966 59.8 .8 9.5 5.6 10.2 2.6 11.4
PX Deq: Execution Msg 10.6K 72.4 12.1 2.6 2.5 .1 5.6 4.6 .0
PX Deq: Join ACK 3006 77.9 22.1 .1
PX Deq: Parse Reply 3184 67.1 31.1 1.6 .2
PX Idle Wait 6466 .2 8.7 4.3 4.8 .3 .1 5.0 76.6
SQL*Net message from client 14.7K 72.4 2.8 .8 .5 .9 .4 2.8 19.3
Space Manager: slave idle wait 722 100.0
Streams AQ: RAC qmn coordinator idle wait 259 100.0
Streams AQ: qmn coordinator idle wait 250 50.0 50.0
Streams AQ: qmn slave idle wait 125 100.0
class slave wait 55 67.3 7.3 1.8 5.5 1.8 7.3 9.1
dispatcher timer 66 6.1 93.9
gcs remote message 218.6K 7.7 1.8 1.2 1.6 1.7 15.7 70.3
ges remote message 72.9K 29.7 5.1 2.7 2.2 1.5 4.0 54.7
heartbeat monitor sleep 722 100.0
jobq slave wait 7725 .1 .0 99.9
pmon timer 1474 18.4 81.6
rdbms ipc message 103.3K 20.7 2.7 1.5 1.3 .9 .7 40.7 31.6
shared server idle wait 121 100.0
smon timer 18 100.0
wait for unread message on broadcast channel 7238 .3 99.7
Back to Wait Events Statistics
Back to Top
Wait Event Histogram Detail (64 msec to 2 sec)
* Units for Total Waits column: K is 1000, M is 1000000, G is 1000000000
* Units for % of Total Waits: ms is milliseconds s is 1024 milliseconds (approximately 1 second)
* % of Total Waits: total waits for all wait classes, including Idle
* % of Total Waits: value of .0 indicates value was <.05%; value of null is truly 0
* Ordered by Event (only non-idle events are displayed)
% of Total Waits
Event Waits 64ms to 2s <32ms <64ms <1/8s <1/4s <1/2s <1s <2s >=2s
ASM file metadata operation 6 99.8 .1 .1
DFS lock handle 6 99.9 .1 .0
OJVM: Generic 16 55.6 2.8 41.7
PX Deq: Signal ACK RSG 3 99.9 .0 .1
PX Deq: Slave Session Stats 3 99.9 .0 .0 .0
SQL*Net break/reset to client 1 95.0 5.0
control file sequential read 1 100.0 .0
db file parallel read 34 91.4 8.6
db file scattered read 4 100.0 .0 .0
db file sequential read 6 100.0 .0 .0 .0
direct path write temp 11 99.8 .1 .1 .0
enq: WF - contention 2 81.8 18.2
gc cr block 2-way 1 100.0 .0
gc cr multi block request 1 100.0 .0
gc current block 2-way 1 100.0 .0
gc current block busy 2 71.4 28.6
gc current grant busy 8 99.9 .0 .1
ges lms sync during dynamic remastering and reconfig 13 45.8 20.8 33.3
kjbdrmcvtq lmon drm quiesce: ping completion 8 11.1 11.1 77.8
latch: shared pool 1 80.0 20.0
library cache load lock 26 64.9 14.9 12.2 4.1 4.1
log file parallel write 2 99.9 .0 .0
log file sequential read 10 97.1 2.0 .6 .3
log file switch completion 2 33.3 66.7
name-service call wait 4 77.8 22.2
os thread startup 146 100.0
reliable message 4 99.9 .0 .1
row cache lock 2 99.7 .0 .0 .3
Back to Wait Events Statistics
Back to Top
Wait Event Histogram Detail (4 sec to 2 min)
* Units for Total Waits column: K is 1000, M is 1000000, G is 1000000000
* Units for % of Total Waits: s is 1024 milliseconds (approximately 1 second) m is 64*1024 milliseconds (approximately 67 seconds or 1.1 minutes)
* % of Total Waits: total waits for all wait classes, including Idle
* % of Total Waits: value of .0 indicates value was <.05%; value of null is truly 0
* Ordered by Event (only non-idle events are displayed)
% of Total Waits
Event Waits 4s to 2m <2s <4s <8s <16s <32s < 1m < 2m >=2m
row cache lock 6 99.7 .3
Back to Wait Events Statistics
Back to Top
Wait Event Histogram Detail (4 min to 1 hr)
No data exists for this section of the report.
Back to Wait Events Statistics
Back to Top
Service Statistics
* ordered by DB Time
Service Name DB Time (s) DB CPU (s) Physical Reads (K) Logical Reads (K)
ubshost 1,934 1,744 445 73,633
SYS$USERS 105 45 1 404
SYS$BACKGROUND 0 0 1 128
ubshostXDB 0 0 0 0
Back to Wait Events Statistics
Back to Top
Service Wait Class Stats
* Wait Class info for services in the Service Statistics section.
* Total Waits and Time Waited displayed for the following wait classes: User I/O, Concurrency, Administrative, Network
* Time Waited (Wt Time) in seconds
Service Name User I/O Total Wts User I/O Wt Time Concurcy Total Wts Concurcy Wt Time Admin Total Wts Admin Wt Time Network Total Wts Network Wt Time
ubshost 60232 90 2644 4 0 0 13302 0
SYS$USERS 997 2 525 19 0 0 1973 0
SYS$BACKGROUND 1456 2 1258 14 0 0 0 0
I am not able to paste the whole awr report. I have paste some of the sections of awr report.
Please help.
Thanks and Regards, -
How to set the classloader mode in Netweaver 04s
Hi All,
Can anybody tell me how to set classloader mode in Netweaver 04S?
In websphere , there is direct option you when you select the project through admin console. But I am able to find the place in the netweaver where I can set such mode.
classloader mode such as parentfirst, parent last etc
I want to set the mode parent last.
This is very urgent requirenment.So please let me know if anybody is having any input on this.
Thanks,
ChandanHi Siddhesh,
Thanks for replying.
Actually,NW has its own version of jaxrpc related jar files (in <drive>:\usr\sap\J2E\JC02\j2ee\cluster\server0\bin\ext\webservices_lib folder) which are of a older version and are being picked up instead of the jars that are present in my application package. As a result, there are exceptions like:
#1.5#0018FE710E98005B000000000000182800044D0B9F1ED11B#1210612216444#System.err#tdemand.com/TrueDemandWeb#System.err#Guest#0#####Thread[Thread-271,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain###java.lang.NoSuchMethodError: javax.xml.namespace.QName.getPrefix()Ljava/lang/String;#
#1.5#0018FE710E98005B000000010000182800044D0B9F1ED31A#1210612216444#System.err#tdemand.com/TrueDemandWeb#System.err#Guest#0#####Thread[Thread-271,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain### at org.apache.axis.wsdl.symbolTable.BackslashUtil.getQNameWithDifferentLocal(BackslashUtil.java:62)#
#1.5#0018FE710E98005B000000020000182800044D0B9F1ED379#1210612216444#System.err#tdemand.com/TrueDemandWeb#System.err#Guest#0#####Thread[Thread-271,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain### at org.apache.axis.wsdl.symbolTable.BackslashUtil.getQNameWithBackslashlessLocal(BackslashUtil.java:39)#
#1.5#0018FE710E98005B000000030000182800044D0B9F1ED3D3#1210612216444#System.err#tdemand.com/TrueDemandWeb#System.err#Guest#0#####Thread[Thread-271,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain### at org.apache.axis.wsdl.symbolTable.SymbolTable.populateServices(SymbolTable.java:3078)#
#1.5#0018FE710E98005B000000040000182800044D0B9F1ED42B#1210612216444#System.err#tdemand.com/TrueDemandWeb#System.err#Guest#0#####Thread[Thread-271,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain### at org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.java:745)#
#1.5#0018FE710E98005B000000050000182800044D0B9F1ED481#1210612216444#System.err#tdemand.com/TrueDemandWeb#System.err#Guest#0#####Thread[Thread-271,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain### at org.apache.axis.wsdl.symbolTable.SymbolTable.add(SymbolTable.java:543)#
#1.5#0018FE710E98005B000000060000182800044D0B9F1ED4D8#1210612216444#System.err#tdemand.com/TrueDemandWeb#System.err#Guest#0#####Thread[Thread-271,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain### at org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.java:518)#
#1.5#0018FE710E98005B000000070000182800044D0B9F1ED52F#1210612216444#System.err#tdemand.com/TrueDemandWeb#System.err#Guest#0#####Thread[Thread-271,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain### at org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.java:495)#
#1.5#0018FE710E98005B000000080000182800044D0B9F1ED585#1210612216444#System.err#tdemand.com/TrueDemandWeb#System.err#Guest#0#####Thread[Thread-271,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain### at org.apache.axis.wsdl.gen.Parser$WSDLRunnable.run(Parser.java:361)#
#1.5#0018FE710E98005B000000090000182800044D0B9F1ED5E1#1210612216444#System.err#tdemand.com/TrueDemandWeb#System.err#Guest#0#####Thread[Thread-271,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain### at java.lang.Thread.run(Thread.java:534)#
#1.5#0018FE710E98004F00001A610000182800044D0B9F1F2B60#1210612216475#System.out#tdemand.com/TrueDemandWeb#System.out#Guest#0#####SAPEngine_Application_Thread[impl:3]_9##0#0#Info##Plain###2008-05-12 10:10:16,459 ERROR [com.tdemand.common.service.client.ServiceProxyUtil] - <Error processing WSDL document:
javax.xml.rpc.ServiceException: Error processing WSDL document:
javax.xml.rpc.ServiceException: Cannot find service: BootstrapService>
javax.xml.rpc.ServiceException: Error processing WSDL document:
javax.xml.rpc.ServiceException: Error processing WSDL document:
javax.xml.rpc.ServiceException: Cannot find service: BootstrapService
at org.apache.axis.client.Service.initService(Service.java:250)
at org.apache.axis.client.Service.<init>(Service.java:165)
at org.apache.axis.client.ServiceFactory.createService(ServiceFactory.java:198)
at org.springframework.remoting.jaxrpc.LocalJaxRpcServiceFactory.createJaxRpcService(LocalJaxRpcServiceFactory.java:182)
This problem is solved in websphere as probably because we have classloader configuration set through Admin console.
But just wanted to know does we have such option in NetWeaver? If yes, how to set the classloader mode to parent last.
Or if you know some other solution then let me know.
Thanks,
Chandan -
Start page lacks menu items - unlike "How to set the home page" view
I have just downloaded the beta of Firefox 4 and am attempting to reproduce opening home page from previous version. Directions on accomplishing this (loading the NY Times front page) depend on a menu bar with "File, Edit, View, History" etc. There are not visible. They are shown in the directions on Firefox Help but not on my computer. How to do this??
Click the Firefox button, then click Options. This will open the options dialog that the [[How to set the home page]] article refers to.
When viewing the support articles, in the right-hand column there is a section titled "Help With:", make sure it is set to Windows and Firefox 4 to get help relevant to the version you are using. In some articles you get different content when you select Firefox 4. -
How to run the cocoa app directly after completion of downloading ?
Hi ,
How to run the cocoa app directly on mac after completion of downloading ? I have a .app at server , I want to run the .app automatically after download and the .app should not save at download directories .
Thankshi,
There is no need to burn on Disk..instead run the runInstaller file fiom Disk1/install..please read the readme.txt file before installation..
check the kernel parameter and Even set the DISPLAY before installtion,in order to get proper GUI
Regards
Fabian -
How to set the camera behavior target ?
Hi, guys:
I am sorry to aks this quesion. I know it must be very basic quesion, but I have been search the anwser for a while.
I don't know if it's wrong key word or what, but I just can't find my way to setting the camera target.
I want to use the camera behavior, but the target is none, and I just don't konw how to set the target to the object I want.
Is there anynone can help me with this newbie quesion? Or give me a direction to read?
Thank you for your time!aa33002 wrote:
Hi, guys:
… and I just don't konw how to set the target to the object I want.
just drag the target/object into that tiny square ...
but your project actually doesn't list any target-objects.
or should the word 'target' be the target?
than drag that into the tiny box ..... -
How to set the connection parameters for SQL
How to set the connection parameters for SQL to access the MS Access database
Attachments:
Quick_SQL.vi 21 KB
Doc1.doc 45 KB
db1.mdb 112 KBRight-click the WINDOWS desktop, choose New->Microsoft Data Link. That will bring up a dialog that allows you to configure and test your database connection. You might connect to the Access database via ODBC or directly via Jet Engine. The Jet Enginge saves you the trouble of creating an ODBC connection on your PC. After you leave the dialog, the "data link" will show up on your desktop as text file. Open it and copy-paste the connection string to your VI.
This webpage is an excellent resource for connection strings: http://www.able-consulting.com/ADO_Conn.htm
If your application requires users to change the database connection at runtime, you can also include the dialog via ActiveX (MSDASC.IDataSourceLocator).
Maybe you are looking for
-
Camera connection kit w/USB says cannot work uses too much power
When using the camera connection kit /USB the message cannot use device it uses too much power pops up!
-
Order of purchased playlist not changing
I have an odd problem. Back in December, I purchased 2 songs back to back. One of them was purchased from my phone and then I purchased the other one through ITunes on the computer, and it was downloaded to the phone right away as always. However, wh
-
Hi I always had problems with DW layout using CSS with DIV tags. In the old day, layout with tables, I can put images and text anywhere I want. But with DIV tags I have no choice, Images will be float left or right of page and creating 2 columns or
-
What is the best practice for the WLI?
Hello to everyone, I am a newbie to the Weblogic Integration Server and I had read the docs of WLI from the BEA, like "Programming BPM Client Applications". But I found it is bitter and astringent. I am wondering there is documents and samples for We
-
I've already tried the MS help website suggested in the error window and there is no assistance available there. Help!