How to set the focus to the tabbed pane title?

Dear Friends,
I'm using tabbed pane (JTabbedPane) in my application. I have 2 tabbed panes and each contain some text fields and buttons.
In first tabbed, I have 2 text fields, OK and Cancel buttons. I have to set the focus to the title of the tabbed pane after it lost focus from the Cancel button (focus has to move from Cancel button to tabbed pane title by pressing tab key).
Could anyone please tell me how to set the focus to the tabbed pane title?
Thanks in advance,
Sathish kumar D

Thanks for your reply.
Could you please tell me how to set focus for title of the tabbed pane throug FocusTraversalPolicy?
because usually we set the focus for the component by requestFocusInWindow().
for example set focust to the button OK,
btnOk.requestFocusInWindow()likewise could you tell me how to set focus to Title of the tabbed pane?
Sathish kumar D

Similar Messages

How to Get the focus of the textbox.

Hi all,
I have a problem in getting the focus of the textbox, The scenario is in this way,
I have 3 textboxes in a window, each one should should get enabled one after the other only (i.e) Textbox2 should be enabled only after Textbox1 is filled and pressed the TAB button and Textbox3 is enabled only after Textbox2 is filled and pressed the TAB button. Textbox2 is also enabled when the cursor is in Textbox3 and SHIFT+TAB is pressed,
I tried this with the Focus Listener but i cant able to get the cursor in the textbox. Please help in this, how to do this.
Thanks in Advance.

844031 wrote:
Hi all,
I have a problem in getting the focus of the textbox, The scenario is in this way,
I have 3 textboxes in a window, each one should should get enabled one after the other only (i.e) Textbox2 should be enabled only after Textbox1 is filled and pressed the TAB button and Textbox3 is enabled only after Textbox2 is filled and pressed the TAB button. Textbox2 is also enabled when the cursor is in Textbox3 and SHIFT+TAB is pressed,
I tried this with the Focus Listener but i cant able to get the cursor in the textbox. Please help in this, how to do this.
Thanks in Advance.Hello user,
If you are talking about 'TextBox' of javafx then please start a new thread on Javafx Category here:JavaFX 1.x and JavaFX Script [ARCHIVE]
Thanks.,
narayan

Metoh refresh_table_display will set the focus to the first cell

metoh refresh_table_display will set the focus to the first cell,how i can set it back to the position before
refresh.
thanks.
Message was edited by: W C

Hi,
The method REFRESH_TABLE_DISPLAY has the parameters, IS_STABLE. Set both ROW / COL parameters of IS_STABLE to 'X'.
Then when you refresh the display will not shake.
Regards,
Ravi
Note : Please close the thread if answered

How to make the focus to the TextInput field

Hi,
How to make the focus to the TextInput field. I tried with userIDTxtIt.setFocus(); The focus is available to the text input. but when i enter the value as 'Thiru' to the TextInput field, the keyboard is not available there. so i tried with userIDTxtIt.dispatchEvent(new MouseEvent(MouseEvent.DOUBLE_CLICK));
still key board focus is not availble to the text input.
Regards,
Thiru

Thanks for your reply.
I got the more info by reading the comments inthe following link.
http://blog.flexexamples.com/2008/09/23/setting-focus-in-flex-using-the-focus-manager/
regards,
Thiru

How to get the focus at the end of text ?

I am having applet with awt TextField component and some default text. (MSQ-)
To have a focus to text field I am using :
refnoTextField.requestFocus();
But this gives focus at the biginning and not at the end of text. I want the focus at the end (i.e. after MSQ-)
How to get the focus at the end of text ?
any help ?
manisha
manisha

public void focusGained(FocusEvent e) {
if (e.getSource() == yourtextbox) {
yourtextbox.setSelectedEnd(yourtextbox.getLength());
try this thing - not sure if it'll work, but I figgured out how to apply it to my textareas for keeping the focus on the last line of the textarea..it might work for your textboxes..
shrug

How to set white spaces between the fields in dataset??

Hi all,
I am writing a set on information to from infotypes to a text file. Its a fixed width file. How do set white spaces in the fields for dataset?
Example:
TYPES: begin of header,
                filler(40) type c,
                id(3)        type c,
                filler2(7) type c,
                delimiter type c,
             end of header.
DATA header type header.
header-filler1 = ' '.
header-id       = '100'.
header-filler2 = ' '.
header-delimiter = cl_abap_char_utilities=>newline.   ( do it to get a new line)
my_table = header.
append my_table.
DATA: out_file(256) type C,
      codepage_ref type ref to CX_SY_CONVERSION_CODEPAGE,
      out_char type c,
      size type i,
      insert_string type string,
      insert_size type i.
out_file = filename.
open dataset out_file for output in text mode ENCODING NON-UNICODE.
LOOP AT my_table.
    size = strlen( my_table ).
    insert_string = ''.
    DO size TIMES.
      offset = sy-index - 1.
      try.
          out_char = my_table+offset(1).
          IF out_char = SPACE.
            CONCATENATE insert_string '' INTO insert_string SEPARATED BY SPACE.
          ELSE.
            CONCATENATE insert_string out_char INTO insert_string.
            transfer insert_string to out_file NO END OF LINE .
            insert_string = ''.
          ENDIF.
        catch CX_SY_CONVERSION_CODEPAGE.
          insert_size = strlen( insert_string ) - 1.
          insert_string = insert_string(insert_size).
      endtry.
    ENDDO.
   transfer CL_ABAP_CHAR_UTILITIES=>NEWLINE TO out_file NO END OF LINE.
ENDLOOP.
close dataset out_file.
How do I get to insert the space for filler1 and filler2?
Edited by: Siong Chao on Oct 4, 2011 4:56 AM
Edited by: Siong Chao on Oct 4, 2011 8:27 AM
Edited by: Siong Chao on Oct 4, 2011 8:29 AM

problem lies in the open dataset codes
Used:
open dataset out_file for output in text mode encoding non-unicode message msg.
if sy-subrc= 0.
loop at my_table.
transfer my_table to out_file
transfer cl_abap_char_utilities=>newline to out_file no end of line.
endloop.

How to set a song in the playlist to be phone ringtone

how to set my song in the playlist to be my ringtone

you have to convert it to a ringtone first. searching google will give you many ways to do it. also, there are some ringtone apps with pros and cons to each one. you cannot just pick a song on your phone and make it a ringtone unfourtunately.

How to set a cookie in the browser from an html page called via an Iview

How to set a cookie in the browser from an html page called via an Iview
Hello all,
I have an issue which is causing problems. I have a snap survey (html form with submit and cookie setting) which is embedded in a url iview.
Although the submit and the form work fine, the portal will not allow the cookie to be set it seems.
Is there a way to allow cookies to be set from an embedded page in a url iview??
You will make my day if you know!
System: EP7 SP13
Kind regards
Alex

Hi,
Check this:
http://www.oracle.com/technology/products/ias/portal/html/same_cookie_domain_with_pdkv2.html
Cookie Basics
Web browsers have built in rules for receiving and sending cookies. When a browser makes a request to a web server and the web server returns cookies with the response, the browser will only accept a cookie if the domain associated with the cookie matches that of the original request. Similarly, when a browser makes a subsequent request, it will only send those cookies whose domain matches that of the target web server.
These rules are designed to ensure that information encoded in cookies is only "seen" by the web server(s) that the originator of the cookie intended. These rules also ensure that the cookie cannot be corrupted or imitated by another server. By default, the domain associated with a cookie exactly matches that of the server that created it. However, it is possible to modify the domain at the time the cookie is created. Relaxing the cookie domain increases the scope of the cookie's visibility making it available to a wider "audience" of web servers.
For example, if a cookie is created by a.us.oracle.com, it's domain will usually be set to a.us.oracle.com. This means that the browser will only send the cookie to a.us.oracle.com. It will never send it to any other servers. However, if at the time of creation, the domain of the cookie is set to .us.oracle.com, the browser will send the cookie to any server whose domain falls within .us.oracle.com. such as portal.us.oracle.com, provider.us.oracle.com, app.us.oracle.com etc
Regards,
Praveen Gudapati

TS4006 how to set a tracking from the computer if someone stolen the ipod

how to set a tracking from the computer if someone stolen the ipod

Welcome to the Apple Community.
You can only locate your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.

How to set Where clause in the View Object of the MessageChoice ?

Hi,
How to set Where clause in the View Object of the
MessageChoice ?
Example:
<bc4j:rootAppModuleDef name="EdEscolaCampusView1AppModule"
definition="ed00050.Ed00050Module"
releaseMode="stateful" >
<bc4j:viewObjectDef name="EdEscolaCampusView1" >
<bc4j:rowDef name="CreateEdEscolaCampusView1" autoCreate="true" >
<bc4j:propertyKey name="key" />
</bc4j:rowDef>
</bc4j:viewObjectDef>
<bc4j:viewObjectDef name="ListaTipLocalView1"
rangeSize="9999">
</bc4j:viewObjectDef>
</bc4j:rootAppModuleDef>
</bc4j:registryDef>
messageChoice declaration:
<bc4j:messageChoice name="SeqTipoLocalCampus"
attrName="SeqTipoLocalCampus"
prompt="Local do Campus">
<contents>
<bc4j:optionList attrName="SeqTipoBasico"
textAttrName="NomTipoBasico"
voName="ListaTipLocalView1"/>
</contents>
</bc4j:messageChoice>
I would like set where clause of ViewObject, with dinamic parameters (using attribute1 = :1), before populate messageChoice.
thanks...
Danilo

Hi Andy,
I try set a where clause using the message:
Set where Clause parameter using UIX , but my UIX Page have 2 messageChoice's of different ViewObject's, then I need implement this Java Class:
//Nome da Package da Tela Detail
package br.com.siadem.siaed.ed00050;
// Importa as Bibliotecas necessárias
import oracle.jbo.ViewObject;
import oracle.jbo.ApplicationModule;
import oracle.jbo.client.Configuration;
import oracle.cabo.servlet.BajaContext;
import oracle.cabo.servlet.Page;
import oracle.cabo.servlet.event.PageEvent;
import oracle.cabo.servlet.event.EventResult;
import oracle.cabo.data.jbo.servlet.bind.*;
import oracle.cabo.ui.data.BoundValue;
import oracle.cabo.ui.data.DataBoundValue;
import javax.servlet.http.HttpServletRequest;
import br.com.siadem.siaed.util.*;
import javax.servlet.http.Cookie;
import oracle.cabo.data.jbo.def.NestedAppModuleDef;
import oracle.cabo.data.jbo.def.ViewObjectDef;
import oracle.cabo.data.jbo.def.AppModuleDef;
// Classe que configura os parametros para a execução da Query,
// utilizando variáveis de Sessao
public class FunPreQueryLista
public static EventResult FunConfiguraQuery(BajaContext context, Page page, PageEvent event) throws Throwable
// TrataDadosSessao - Classe utilizada para retornar os valores das variáveis de sessão genéricas
// Ex: CodCliente, CodMunicipio etc...
TrataDadosSessao varDadosSessao = new TrataDadosSessao();
// 1o. Parametro Configurado - Através da classe TrataDadosSessao, utilizando um método Get
// <alterar>
String valor1 = varDadosSessao.getCodCliente();
String valor2 = varDadosSessao.getCodMunicipio();
//Cria o objeto que retorna o ApplicationModule
ApplicationModule am = ServletBindingUtils.getApplicationModule(context);
// Início das Configurações da Query da Lista
//Cria o objeto que retorna o view object da lista desejada
//alterar
ViewObject TipoLocal = am.findViewObject("ListaTipoLocalView1");
//Configuração dos parametros definidos na query do view Object
//alterar
TipoLocal.setWhereClauseParam(0,valor1);
TipoLocal.setWhereClauseParam(1,valor2);
// Executa a Query
TipoLocal.executeQuery();
// Fim das Configurações da Query da Lista
// Início das Configurações da Query da Lista
//Cria o objeto que retorna o view object da lista desejada
//alterar
ViewObject TipoDestLixo = am.findViewObject("ListaDestinoLixoView1");
//Configuração dos parametros definidos na query do view Object
//alterar
TipoDestLixo.setWhereClauseParam(0,valor1);
TipoDestLixo.setWhereClauseParam(1,valor2);
// Executa a Query
TipoDestLixo.executeQuery();
// Fim das Configurações da Query da Lista
// Retorna o Resultado para a Página
return new EventResult(page);
The code works very well...
And, I'm sorry for my two repost's in UIX Forum about this in a few time.
Thank very much...
Danilo

How to set default values on the screen painter parameters?

Hello ABAP Gurus,
I would just want to ask how to set default values on the screen painter parameters.
Thank you for your replies.

Hi,
To set default values for screen painter parameters initialize the field names with default values in the PBO module....
say u have the field name as f_field1....
in the PBO of that screen initialize it....
f_field1 = '100' "here 100 is the default value.
<b>reward points if useful.</b>
regards,
Vinod Samuel.

C How to Set Isolation Level in the Connection String

How to Set Isolation Level in the Connection String using the "Microsoft OLE DB Provider for DB2 Version 4.0"?
We are trying to move from Crystal Reporting that run against a IBM DB2 database on a mainfram to SSRS reporting and we have downloaded the "Microsoft OLE DB Provider for DB2 Version 4.0" and then worked with the DB2 Administrator to create the
Packages. We only have access to use the "Read Uncommitted ("MSUR001") package. We were able to connect and pull data before he removed access to the other packages, but after setting access the Connection keeps trying to use
the 'Cursor Stability (MSCS001)" package. How do we change the Default to the "Read Uncommitted ("MSUR001") package??? Since it is keeps defaulting to the the other package
we can't connect to do it in the T-SQL query, it has to be set at the Connection String level.

Hi Dannyboy1263,
According to your description, you want to set the Transaction Isolation Level in Connection String. Right?
In Reporting Services, the Connection String for OLE DB Connection can only contains Provider, Data Source and Initial Catalog. There's no property for setting Transaction Isolation Level in the Connection String. Based on my knowledge, we can
only set the Transaction Isolation Level at Query level or set it by using code (C#, VB, Java...) to call the property of Connection. So unfortunately your requirement can't be achieved currently.
Reference:
OLE DB Connection Type (SSRS)
Data Connections, Data Sources, and Connection Strings in Reporting Services
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

How to set Password change in the WAD Browser

Hello All
Before dropping my question i will explain you what was the Real scenario, i am using WAD 3.50 Version and server is BW 3.0B.we are not using portal, and Enduser will view the reports in the browser through the WAD execute Http link.
Question.
whenever the enduser uses Http link of web template in the browser, he will connect through VPN and they can able view the reports. the question is *Some system Enduser won't have SAPGUI in their system so they wants to change the password because they won't know even if it is expire.
Please Help me how to set Change Password in the browser for the WAD Application*.

To do this you will have to use either make use of portal or BSP application or Dynpro..
It is not possible for the user to change the password just from the web query

Can anybody tell me how I set an hiperlink in the new Adobe Muse CC 2014...

Can anybody tell me how I set an hiperlink in the new Adobe Muse CC 2014...?

Check out: http://helpx.adobe.com/muse/using/creating-hyperlinks.html
Cheers,
Vikas

How to set InDesign CS5 as the default in the system having InDesign CS4 has the default ?

How to set InDesign CS5 as the default .indd application when you have InDesign CS4 and CS5 installed and InDesign CS4 is the current default (InDesign CS4 was installed after CS5 installation)

Thanks, but I already tried it at first but it is not the effective method.
I think its because of the this reason :
Both - InDesign CS4 and InDesign CS5 have their application/program/exe named as "indesign.exe".
Installation of either InDesign CS4 or InDesign CS5, sets a Windows default path for the "indesign.exe". In this case, since InDesign CS4 was installed later (after InDesign CS5 was already installed), the "indesign.exe" which was directing InDesign CS5's "indesign.exe" was replaced by InDesign CS4's "indesign.exe".
But after long google and search through regedit, I've got the solution :
Locate HKEY_CLASSES_ROOT\InDesign.Document\Shell\Open\Command in regedit
Change the value of (Default) attribute to "C:\Program Files (x86)\Adobe\Adobe InDesign CS5.5\InDesign.exe" "%1" // Include the quotes
Message was edited by: Vidit Kothari

How to set the focus to the tabbed pane title?

Similar Messages

Maybe you are looking for