How to set the fonts in the user profile(very urgent)

Hi All,
Can anyone please tell how to set the fonts in the user profile.
We have a requirement where currently all the data is being displayed in a font and the user want to change that font permanently.
I hope you have got the requirement.
Points will be surely awarded.
Thank you.

Hi,
U can do this in SU02.
Kishi.

Similar Messages

How to change the font style for user profile information in My Profile page?

Hello,
In my profile page, user information is getting display as below:
Name
Title
Department --> Would you please let me know how can I change style for Department ( Information Technologies) Attribute in this section ?
Thanks and Regards,
Dipti Chhatrapati

Hi Romeo,
I got your point and class I require to apply is as below:
.ms-contactcardtext3 {
font-family:
Arial !important;
font-style: italic !important;
Thank you for your trick :)
But its getting apply to title as well as to Department - as above class is same for both fields , while I require to change the style only for the department.
Any suggestions ? I have changed the same using Designer which works as per the need , however - I dont want to use SPD Tool !!!
Bottom line : I Require different font style in Title and Department without use of SPD.
Any suggestions/idea ?
Thanks and Regards,
Dipti Chhatrapati

PS CS6 has a different set of installed fonts than my old PS CS4. How do I get my old fonts back? Don't like most of the CS6 fonts. Dell Precision, Windows 7. Does PS use the fonts in the Windows directory or does it use its own? A lot of my preferre

PS CS6 has a different set of installed fonts than my old PS CS4. How do I get my old fonts back? Don't like most of the newer CS6 fonts. Dell Precision, Windows 7. Does PS use the fonts in the Windows directory or does it use its own? If so, where are they in the directory? A lot of my preferred fonts show in the Windows directory but not in Photoshop, which does not display them within the program. Please help. If I get free fonts (NOT CC fonts) from elsewhere, where do I put them for Photoshop[ CS6 to use them? Thanks.

All versions of Photoshop get their fonts from your OS. Just install any missing font wherever Windows keeps fonts.
I don't do windows myself.

The font in the URL address line is too small. How do I make it bigger? My computer screen is already set for maximum size.

# Question
Since Firefox last updated to a new version, the font in the URL address line is too small. How do I make it bigger? My computer screen is already set for maximum size.

See http://kb.mozillazine.org/Editing_configuration#How_to_edit_configuration_files
Add code to [http://kb.mozillazine.org/UserChrome.css userChrome.css] below the @namespace line.
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#urlbar .textbox-input-box {font-size:13pt !important;}
#searchbar .textbox-input-box {font-size:13pt !important;}
#FindToolbar .textbox-input-box {font-size:13pt !important;}
</nowiki></pre>

How is it that fonts in the Mac system can be damaged?

How is it that fonts in the Mac system can be damaged?
It does not hapen in PC systems, ever!
How do we go about replacing the damaged fonts?
I treid to delete and reinstall but no sucess.
Also, Mac systems can only have active about 250 fonts.
PC systems can have up to 1,000 fonts and run very smoothly with any hitches.
Any sloutions or recommendations?
Looks like I made a wrong choice.
I thought that Mac systems was very stable when it comes to graphic related applications, but it seems that I was WRONG.
A simple font base also Mac system cannot handle as well as a PC based system.
Sorry if I have offended other Mac users.
But, I would really like to continue using my Macbook Pro.
Cheers and Merry Christmas, everyone!!!
Kelvin LEEmy

How is it that fonts in the Mac system can be damaged?
As ds store noted. Any file on any part of the drive can be damaged at any time. This is true of any OS, not just the Mac.
It does not happen in PC systems, ever!
Why in the world would you think that's true? I used DOS/Windows for years. Fonts on PCs get damaged too, for pretty much the same reasons.
How do we go about replacing the damaged fonts?
You can replace just the fonts from your Snow Leopard installation disk. See the bottom of my article, Font Management in OS X for instructions.
I tried to delete and reinstall but no success.
Not enough info. Reinstalled from where?
Also, Mac systems can only have active about 250 fonts.
I don't know where you read or heard that, but it's 100% wrong.
PC systems can have up to 1,000 fonts and run very smoothly with any hitches.
And I've had as many as 8500 active (for testing, I would never do it day to day). Do I win?
Any solutions or recommendations?
The most likely reason, assuming you replaced the fonts with known good copies is Font Book. Put bluntly, it's one of the worst font managers available. It's database is easily corrupted. When that happens, fonts that are marked as active in its interface won't appear in some, or all apps. You'll find you can't activate or deactivate fonts. Use these steps to clean Font Book up so it works.
Restart your Mac and immediately hold down the Shift key when you hear the startup chime to boot into Safe Mode. Keep holding the Shift key until you see a progress bar towards the bottom of the screen. You can let go of the Shift key at that point.
OS X asks you to log in (you will get this screen on a Safe Mode boot even if your Mac is set to automatically log in). Let the Mac finish booting to the desktop and then restart normally. This will clear Font Book's database and the cache files of the user account you logged into in Safe Mode.
After the Mac finishes booting back to the desktop from Safe Mode, do the following to clear the rest of the font cache files.
Close all running applications. From an administrator account, open the Terminal app and enter the following command. You can also copy/paste it from here into the Terminal window:
sudo atsutil databases -remove
Terminal will then ask for your admin password. As you type, it will not show anything, so be sure to enter it correctly.
This removes all font cache files. Both for the system and the current user font cache files. After running the command, close Terminal and immediately restart your Mac.
Looks like I made a wrong choice.
As opposed to what? Dealing with viruses each and every day?
I thought that Mac systems was very stable when it comes to graphic related applications, but it seems that I was WRONG.
Boy, you sure know how to make people want to help you.
A simple font base also Mac system cannot handle as well as a PC based system.
Also flat out wrong. Fonts are simple. You add them and use them. Turn them off when you don't want them active. Learning and understanding a new OS is usually a good idea before you start trashing it.
If problems return soon after resetting Font Book with the notes above, then you most likely installed junk fonts. Free fonts are worth what you paid for them and are the number one source of such problems on both Macs and PCs.
Secondly, get rid of Font Book. If you use and manage fonts every day, get a professional manager. Suitcase Fusion 4 and FontExplorerX Pro are your best choices.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

How to change the Size of the font of the JDeveloper IDE

First of all, this question does not concern the code editor.
How to change the font for the editor is clear, well documented in the documentation as well as in many of this forums threads.
My question is how the font of all the IDE components can be increased.
Is some threads I found to change the font size in the ide.properties file.
I tried that solution but it does not bring any solution.
I'm a person with low vision, using a MB Pro with OS X lion just for overall better visibility.
Talking to a lot of people, who have good vision capabilities, it seems that even a lot of people suffer from the fonts which are to small.
So ... is it possible to document clearly where to do what and in what versions of JDeveloper.
I've not yet discovered if any kind of skin settings can be applied ... but this would be great, surely if some kind of predefined bigger fonts would be available.
Currently I'm using version 11.1.2 and 11.1.1.5.
Help would be dearly appreciated.
Greetings,
Jan.

Did you close JDeveloper and re-open again after making the changes in ide.properties?
If changing the ide.properties does not work.
Try this:
Go to 'Tools' Menu and select 'Preferences' Sub menu:
Select ''Code Editor" and select "Fonts"
Set the options for font-size as in screenshot:
http://adfsampleapplications.googlecode.com/svn/trunk/images/FontChange.png
Thanks,
Navaneeth

I created a pdf form from a Word doc with 9 pt aerial font formatting; the text on the pdf form is aerial 9 pt, but the fields are formatted in courier 12 pt - How do I reformat the font in the fields??

I created a pdf form from a Word doc with 9 pt aerial font formatting; the text on the pdf form is aerial 9 pt, but the fields are formatted in courier 12 pt - How do I reformat the font in the fields??

You can set up a temporary button (or link, bookmark, etc.) and add the following JavaScript action:
// Mouse Up script for a temporary button (or bookmark, etc.)
// Change the font and font size for all text fields in this document
for (var i = 0; i < numFields; i += 1) {
    var f = getField(getNthFieldName(i));
    if (f.type === "text") {
        f.textFont = font.Helv;
        f.textSize = 9;
It also sets the font size, but you can remove that line if you don't need to do that.

How do I change font in the whole document at the same time?

How do I change font in the whole document at the same time?

Menu > View > Show Styles Drawer
Menu > Help > Pages User Guide
Download and read page 27 on creating and using Styles, which is done largely by example ie you make the text what you want then save it as a Style to be applied wherever you want in the document from the Styles Drawer.
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=180&mforum=iworktips ntrick
Peter

How can change the font in the script output and the data grid ?

How can change the font in the script output and the data grid in Sql Developer?

You can't easily unless you have the latest version (2.1.1).
If you do have this version then changing the font in the Tools/Preferences menu under the code editor/fonts section will also change the font of the data grid.
For details of changing the fonts in an earlier version then see Sue's post below.
http://sueharper.blogspot.com/2010/03/back-to-basics-changing-font-setting-in.html

How to set Password change in the WAD Browser

Hello All
Before dropping my question i will explain you what was the Real scenario, i am using WAD 3.50 Version and server is BW 3.0B.we are not using portal, and Enduser will view the reports in the browser through the WAD execute Http link.
Question.
whenever the enduser uses Http link of web template in the browser, he will connect through VPN and they can able view the reports. the question is *Some system Enduser won't have SAPGUI in their system so they wants to change the password because they won't know even if it is expire.
Please Help me how to set Change Password in the browser for the WAD Application*.

To do this you will have to use either make use of portal or BSP application or Dynpro..
It is not possible for the user to change the password just from the web query

I have followed all the instructions for setting the font size,but it remains very tiny (6 or 8 point). Why?

Though the font on the desktop and email programs is fine (14 or 16 point), on the google sedarch pages or any websites that are accessed via Firefox, it is tiny. What's wrong? How can I make things more legible? I am working on a laptop and followed all the instructions given in DISPLAY.
Thanks for any advice.

You can use an extension to set a default font size and page zoom on web pages.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

How can I change the font of the titles in a JTabbedPane

Hi
I use a JTabbedPane in a project and use windows LookAndFeel.
I want to distinguish the selected Tab titels by changing the font of the title. Is there anybody who can help me. I can not find any component used as the title. They are only there when I create the tabs with.
myTabbedPan.addTab("aTitle",aPanel);
How TabbedPan use the string "aTitle" to create Tab "Buttons". Is there a component or... I can not get it
Thanks
nan2000

Unfortunately, you have to sub-class the WindowsTabbedPaneUI to do that, and override the convenient methods.
After that, you have to specify to the UIManager this new class it have to use to display the JTabbedPane components.
Denis

How do I change the fonts on the main page.My fonts have recently changed without my doing anything. They are like 6 point instead of the 12 I am used to. Email font is now huge. Is this an ATT/Yahoo problem or Firefox. Safari fonts seem to be o.k.

How do I change the fonts on the home page? They recently shrank from 12 to very tiny..(6 pt?). I did nothing to change them, but after the event tried to change them using "preferences-Fonts"which had no effect. ATT seems to have made a change in their email. The fonts in the email are now huge (18 pt?). This could be an ATT/Yahoo problem with Mac, although Safari seems to be working o. k.

Jim, extensions are also add-ons. Add-ons include extensions, themes and plugins.
Whenever you have a problem with Firefox, whatever it is, you need to make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

How do I customize the font in the tooltip hoverbox that shows when over the navigation bar buttons (back, forward,..home, url/site button, google "G" button ?

I'm doing userchromecss customization of firefox 3.0.19 on slackware linux 12.2 and none of the css lines I've tried would ever change (in size and style) the font inside the hover box. I've tried same css lines on thunderbird and seamonkey and they work, but not on firefox. Here are the css lines I've tride:
*/ set text font of hover box */
.tooltip:hover {
font-size: 9pt !important;
font-family: Tahoma !important;
Result : no change in tooltip font
*/ set text font of hover box */
.tooltip {
font-size: 9pt !important;
font-family: Tahoma !important;
Result : no change in tooltip font
*/ set text font of hover box */
tooltip {
font-size: 9pt !important;
font-family: Tahoma !important;
Result : no change in tooltip font
...and more , but still no change in tool tip font.

The code works for me on Linux for the toolbar buttons and for long lines on chrome pages like about:config<br />
If it isn't working for you on the toolbars then your Linux distribution may be disabling it somehow.

How to set white spaces between the fields in dataset??

Hi all,
I am writing a set on information to from infotypes to a text file. Its a fixed width file. How do set white spaces in the fields for dataset?
Example:
TYPES: begin of header,
                filler(40) type c,
                id(3)        type c,
                filler2(7) type c,
                delimiter type c,
             end of header.
DATA header type header.
header-filler1 = ' '.
header-id       = '100'.
header-filler2 = ' '.
header-delimiter = cl_abap_char_utilities=>newline.   ( do it to get a new line)
my_table = header.
append my_table.
DATA: out_file(256) type C,
      codepage_ref type ref to CX_SY_CONVERSION_CODEPAGE,
      out_char type c,
      size type i,
      insert_string type string,
      insert_size type i.
out_file = filename.
open dataset out_file for output in text mode ENCODING NON-UNICODE.
LOOP AT my_table.
    size = strlen( my_table ).
    insert_string = ''.
    DO size TIMES.
      offset = sy-index - 1.
      try.
          out_char = my_table+offset(1).
          IF out_char = SPACE.
            CONCATENATE insert_string '' INTO insert_string SEPARATED BY SPACE.
          ELSE.
            CONCATENATE insert_string out_char INTO insert_string.
            transfer insert_string to out_file NO END OF LINE .
            insert_string = ''.
          ENDIF.
        catch CX_SY_CONVERSION_CODEPAGE.
          insert_size = strlen( insert_string ) - 1.
          insert_string = insert_string(insert_size).
      endtry.
    ENDDO.
   transfer CL_ABAP_CHAR_UTILITIES=>NEWLINE TO out_file NO END OF LINE.
ENDLOOP.
close dataset out_file.
How do I get to insert the space for filler1 and filler2?
Edited by: Siong Chao on Oct 4, 2011 4:56 AM
Edited by: Siong Chao on Oct 4, 2011 8:27 AM
Edited by: Siong Chao on Oct 4, 2011 8:29 AM

problem lies in the open dataset codes
Used:
open dataset out_file for output in text mode encoding non-unicode message msg.
if sy-subrc= 0.
loop at my_table.
transfer my_table to out_file
transfer cl_abap_char_utilities=>newline to out_file no end of line.
endloop.

How to set the fonts in the user profile(very urgent)

Similar Messages

Maybe you are looking for