How to set the ICC profile in LR to be the same as PS?

Hi Adobe,
Why do my images look much darker and contrasty in LR(4.3) then they do on PS(CS6) where they have far more tonal range? I'm looking at them side by side on the same screen. I know it has to do with ICC profiles but I can't find how you set that in LR. Any help would be appreciated. An example can be viewed here: http://mikedodd.co.uk/other/temp/Screen%20shot%202013-01-22%20at%2023.06.52.jpg You can see how much better the top (PS) image is.
Thanks
Mike

I'm not familiar with that model, but don't all Coloredges come with Color navigator software and sensor? No need to use third-party calibrators, the results are guaranteed to be much better using the Eizo calibrator. I use Eizo easypix on a pair of Flexscans, and the results are vastly better than using Spyder 3 and ColorEyes Display Pro (which I also have).
In any case the Spyder 2 is not a good sensor. It quickly got a bad reputation and rightly so (I have one sitting in the back of a drawer). Things improved tremendously with the Spyder 3, and now the 4 is out.
The general consensus, however, is that the best "mainstream" third-party calibrator currently on the market is the x-rite i1 Display Pro. If this is what you need to use, maybe it's time to retire the Spyder 2?
Most real-world images contain parts that are out of gamut for sRGB, you'll quickly get used to that. But it can still look good. With a little work, it's possible to make almost anything look good inside sRGB. Consider that almost all monitors have a native color space very close to sRGB. Only the so-called wide gamut monitors (I'm not sure if yours is one) exceed that. But with a standard monitor, what you see is already sRGB.
Relative intent "hard-clips" everything outside the target space gamut, but OTOH preserves everything in-gamut unchanged. Perceptual compresses near the gamut border, sometimes resulting in slight color and tonal changes. The difference isn't dramatic, I never bother with intent, but leave it on relative and deal with clipping when necessary (that is, if you lose desired texture and detail).

Similar Messages

  • Could anyone please let me know how to set a ICC profile with Acrobat dlls using Csharp or VB

    Could anyone please let me know how to set a ICC profile with Acrobat dlls using Csharp or VB

    Cant we even use the dlls in an application?
    In order to automate Acrobat, you need to have Acrobat installed. There is
    nothing you can do with just the DLLs. As was already stated, Acrobat is
    not licensed for use on a server, but regardless of that, it's also
    not technically suitable for server use. You need to find a solution
    outside of Acrobat to solve your problem.
    It also seems that you don't have a good understanding of what is going in
    inside a PDF file. PDF is a very complex file format, and based on
    your questions
    and followup questions, you need to spend a considerable amount of time
    getting familiar with the PDF file format to understand how color works in
    the PDF context. Reader the PDF spec, while paying special attention to the
    section about color. You will find out that if you want to convert the
    color space of a "PDF file", you actually need to convert the color space
    associated with every single object in your PDF file. That is fairly simple
    for vector graphic and text, but when it comes to images, you may have to
    convert the image data. Once you have a good understanding of what it is
    you need to do within the PDF file, then you can start looking for tools
    that allow you to do that. Again, Acrobat and therefore the Acrobat SDK is
    not suitable for this task. If you want to stay with Adobe products take a
    serious look at the PDF Library, which his licensed through Datalogics (
    http://www.datalogics.com/products/pdf/pdflibrary/). As you've mentioned,
    there are other, non-Adobe PDF libraries that you can also use, but this is
    the Acrobat SDK forum, so I won't discuss any of those 3rd party solutions.
    You are wasting your time while looking for a simple solution that does not
    exist.

  • How to set the same in mozilla? : 1. Go to Tools(Internet Browser)- Internet Options- Security

    ''locking this thread as duplicate, please continue at [https://support.mozilla.org/questions/1002512]''
    We are using a tool called BMC and we are unable to run reports. In IE the settings 1. Go to Tools(Internet Browser)->Internet Options->Security
    2. Select the Security tab
    3. Click on the Internet zone icon at the top of the tab page
    4. Click the Custom Level button
    5. In the Miscellaneous section change Display mixed content to Enable
    6. Repeat steps 1 – 5 for the Local intranet and Trusted sites zones
    solved the issue, could u suggest how to set the same in Firefox pls?
    Thank you!

    ''locking this thread as duplicate, please continue at [https://support.mozilla.org/questions/1002512]''
    We are using a tool called BMC and we are unable to run reports. In IE the settings 1. Go to Tools(Internet Browser)->Internet Options->Security
    2. Select the Security tab
    3. Click on the Internet zone icon at the top of the tab page
    4. Click the Custom Level button
    5. In the Miscellaneous section change Display mixed content to Enable
    6. Repeat steps 1 – 5 for the Local intranet and Trusted sites zones
    solved the issue, could u suggest how to set the same in Firefox pls?
    Thank you!

  • How to set the same General settings for all users

    Hi Experts,
    How can i set the same general settings for all users e.g. marking the checkbox "Display header" to true for all users? General settings are possible under User Settings Button.
    Regards,
    Arti.

    Hi Arti!
    You can default user settings in a PFCG role, in the "personalization" tab.
    If you have a PFCG role that is common to all your users, you can set the default values here.
    However it does not prevent them to change these settings later, except if you modify the "user settings" fields properties in cProjects application.
    Matthias

  • How to set "embed icc Profile" option  to export document as JPEG

    Hi All,
    While exporting the document as jpeg, through File->Export, there is an option "Embed ICC Profile" as figure shows.
    How to set it if I am exporting the document through my program in which I rasterize the document and used 
    the sAIImage->AsJPEG(raster, jpegDataFilter, params);
    I didn't find any option in AIRasterizeSettings or AIImageOptJPEGParams to set this flag.
    plz anyone suggest me how to do so.
    Thanks,
    Rud.

    thanks for you through out help.
    I use the folowing code which executing properly,but there is no effect on JPEG whether the value of jpegparam.s.jpeg.embedICCProfile is 0 or 1.
    /////Start
    ASOptimizationSettings jpegparam;
    jpegparam.fileFormat = asffJPEG;
    jpegparam.s.jpeg.embedICCProfile = isICCProfileEmbeded;
    ASInt32 optID;
    optID = sAIOptSet->GetUniqueOptimizationSettingsID();
    error = sAIOptSet->SetOptimizationSettings(optID, &jpegparam); // after executing this line error = 0
    /////End
    I guess it would  work when we export document as jpeg through AIActionManagerSuite
    not with  rasterizing the layer's art and then exporting them as JPEG  using AsJPEG().
    thanks

  • How to set the default profiles in pi i have a problem

    hi friends
    can any one give me the solulation for this problem
    Exception class: com.sap.aii.utilxi.prop.api.PropertiesException
    Unable to read configuration data (ExchangeProfile/aii.properties)
    Exception Details
    Exception class: com.sap.aii.utilxi.prop.api.PropertiesException
    Message
    Unable to read configuration data (ExchangeProfile/aii.properties)
    Stacktrace
    Thrown:
    MESSAGE ID: com.sap.aii.utilxi.prop.api.rb_all.NO_PROPERTIES
    com.sap.aii.utilxi.prop.api.PropertiesException: Unable to read configuration data (ExchangeProfile/aii.properties)
         at com.sap.aii.utilxi.prop.api.PropertySourceFactory.initServerMode(PropertySourceFactory.java:202)
         at com.sap.aii.utilxi.misc.api.AIIProperties.initServerMode(AIIProperties.java:401)
         at com.sap.aii.ib.server.applcomp.StartupServerProperties.initPropertiesForServer(StartupServerProperties.java:95)
         at com.sap.aii.ibrep.server.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:152)
         at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
         at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:116)
         at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:383)
         at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:209)
         at jsp_Main1198312518875._jspService(jsp_Main1198312518875.java:21)
         at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Error History, Build Info, Generic Application Info
    plz help me i could not do any work
    how to set the defult profiles
    raja

    Please look at this thread. This might resolve your problem.
    Unable to read configuration data (ExchangeProfile/aii.properties)
    -Pinkle

  • How to set the fonts in the user profile(very urgent)

    Hi All,
    Can anyone please tell how to set the fonts in the user profile.
    We have a requirement where currently all the data is being displayed in a font and the user want to change that font permanently.
    I hope you have got the requirement.
    Points will be surely awarded.
    Thank you.

    Hi,
    U can do this in SU02.
    Kishi.

  • How to setting the root user profile?

    It seems that I can't fine any complet manual to introduce how to setting the root user profile file which locate at /etc/profile? Who can help me find out or figure it out

    first /etc/profile is a global profile for the system
    its not only specific to root
    from here you can configure the system wide paths
    Regardless of the shell you are using, when you first log in your system generally runs the system profile file, /etc/profile. This file is generally owned by the system administrator and is readable (but not writable) by all users.
    After your system executes the system profile, it runs the user profile. The user profile is one (or more) initialization files that define your working environment. For example, if you're in the CDE environment your system checks this file (or set of files) each time you start a new terminal or window.
    refer this::
    http://www.shrubbery.net/solaris9ab/SUNWabe/ADVOSUG/p33.html
    man page here
    http://www.unix.com/man-page/OpenSolaris/4/profile/

  • How to install Epson ICC profiles using Photoshop CC?

    How to install Epson ICC profiles ussing Photoshop CC on Mac?

    Danny,
    Just stop and think for a moment. Firstly, it's not Rocket science to produce an icc profile, and does not involve the profile having to physically 'fit' into a pre-formed item such as the razor blade analogy you used.
    Secondly, If the likes of Epson and HP did produce printer profiles for all makes of paper, can you imagine how much more product they would sell. Printer companies are currently missing out on substantial amounts of income at the moment because the cost of their inks is more expensive than gold! Thus, the third party ink manufacturers - although not producing an ink as good as the original - are earning large sums of money and once again this is income loss to the major printer manufactures.  Can you imagine what would happen if certain vehicles would only run on  a specific fuel? I don't mean Diesel or Petroleum, but different manufacturers, Shell, Texaco, Murco etc.
    At the end of the day the only person who is adversely affected by this business model is us, the consumer.
    I really don't think they need you to be standing up for them Danny.

  • How to set the PATH in Terminal?

    As a newbie to Bash and the Terminal, in connection with installing a new version of Ruby and various add-ons, I have been messing around with changing the PATH via various methods I've found on the internet, and trying to add a new directory to my PATH. Unfortunately, I cannot figure out how to set the PATH correctly. Here is what I understand so far:
    1. Bash first looks to ".bash_profile" in the home directory for PATH settings.
    2. If none, Bash then looks to ".bash_login" for PATH settings.
    3. If none, Bash then looks to ".profile".
    4. If none, Bash then looks to a system file in "/etc/profile" for default PATH settings.
    5. For a new shell after login, Bash looks for a ".bashrc" file.
    I cannot find any of the above files (I have Finder set to show hidden files already). Somehow, following some instructions from the internet without really knowing what I was doing over the past week I have set my PATH as follows:
    /usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/Users/*****/src:/usr/X11/bin
    but I cannot find the file that is setting this PATH. I have tried creating a new ".bash_profile" shell file and putting it in various places such as "/bin" and "/usr/bin" but the file is not being read.
    * As a temporary workaround I tried using the command "source .bash_profile" upon login to set the PATH using the .bash_profile file that I created, but it does not work.
    * I am able to temporarily alter the path using the command "PATH=/usr/local/bin:$PATH" but this only lasts for an active shell; when I close out and reopen a new shell, it reverts to the default.
    So my questions are:
    Is it correct that there is a "/etc/profile" somewhere that is setting the default PATH? If so where is it? Should I alter it, or create a new ".bash_profile" somewhere to set the PATH? If not, where is my PATH being set? If I should create a new ".bash_profile", what exactly should go in it?
    Thanks in advance for any assistance.

    ... I created a new ".bash_profile" file directly under my home directory and it worked like a charm. Below is the content of the file:
    "PATH=/usr/local/bin:/bin/:/sbin/:/usr/bin/:/usr/sbin/:/Users/******/Ruby:/Users/*******/src:/Users/******/Java Programs/"
    What are the "..."'s? Is that just you, or is the contents of the file actually inside of double quotes?
    is there an 'export PATH' also in the file? As in
    PATH=/usr/local/bin:/bin/:/sbin/:/usr/bin/:/usr/sbin/:/Users/******/Ruby:/Users/*******/src:/Users/******/Java Programs/
    export PATH
    And did you either restart your Terminal session so your .bash_profile was read, or issue a 'source .bash_profile' command to execute the .bash_profile after your change?
    The only remaining problem is that from the home directory, I'm unable to directly run programs in the above-designated subdirectories (without first navigating to the subdirectory containing the file. Is there something wrong with the syntax or order of the directories I put in the path?
    For example: there is a file called "newprogram.rb" in the "Ruby" directory listed above. I should be able to execute it from the home directory using "ruby newprogram.rb" but it does not work. The same command works fine from within the "Ruby" directory.
    Does the 'ruby' command search PATH to find its scripts?
    Have you read the "man ruby" man page to see if it talks about PATH?
    A common Unix feature is that programs and scripts with the executable bit set, and are located in a PATH directory, will be run if you just type their names.
    For example, if the first line of newprogram.rb script starts with
    #!/usr/bin/ruby
    and if the script is executable
    chmod +x newprogram.rb
    And if it is in a directory in PATH, then just typing
    newprogram.rb
    should run your perl script using /usr/bin/ruby. If you want to use a different version of Ruby, then change the #! line so it point to your version of Ruby. Or if your version of Ruby is found earlier in PATH then the /usr/bin/ruby, you can use
    #!/usr/bin/env ruby
    as your script's first line which will search PATH for 'ruby' and use the first one it finds.
    Message was edited by: BobHarris

  • How to set the heap size of JVM

    please let me know that how to set the heap size of JVM

    C:\>java -X
        -Xmixed           mixed mode execution (default)
        -Xint             interpreted mode execution only
        -Xbootclasspath:<directories and zip/jar files separated by ;>
                          set search path for bootstrap classes and resources
        -Xbootclasspath/a:<directories and zip/jar files separated by ;>
                          append to end of bootstrap class path
        -Xbootclasspath/p:<directories and zip/jar files separated by ;>
                          prepend in front of bootstrap class path
        -Xnoclassgc       disable class garbage collection
        -Xincgc           enable incremental garbage collection
        -Xbatch           disable background compilation
        -Xms<size>        set initial Java heap size
        -Xmx<size>        set maximum Java heap size
        -Xss<size>        set java thread stack size
        -Xprof            output cpu profiling data
        -Xrunhprof[:help]|[:<option>=<value>, ...]
                          perform JVMPI heap, cpu, or monitor profiling
        -Xdebug           enable remote debugging
        -Xfuture          enable strictest checks, anticipating future default
        -Xrs              reduce use of OS signals by Java/VM (see documentation)look at the -Xm? lines
        -Xms<size>        set initial Java heap size
        -Xmx<size>        set maximum Java heap sizeThis can be used e.g. like this:java -Xms8M -Xmx32M MyProgwhich runs MyProg in a java VM with the initial heap size of 8 MB and a maximum heap size of 32 MB.
    - Marcus

  • How to set the correct shared pool size and db_buffer_cache using awr

    Hi All,
    I want to how to set the correct size for shared_pool_size and db_cache_size using shared pool advisory and buffer pool advisory of awr report. I have paste the shared and buffer pool advisory of awr report.
    Shared Pool Advisory
    * SP: Shared Pool Est LC: Estimated Library Cache Factr: Factor
    * Note there is often a 1:Many correlation between a single logical object in the Library Cache, and the physical number of memory objects associated with it. Therefore comparing the number of Lib Cache objects (e.g. in v$librarycache), with the number of Lib Cache Memory Objects is invalid.
    Shared Pool Size(M)     SP Size Factr     Est LC Size (M)     Est LC Mem Obj     Est LC Time Saved (s)     Est LC Time Saved Factr     Est LC Load Time (s)     Est LC Load Time Factr     Est LC Mem Obj Hits (K)
    4,096     1.00     471     25,153     184,206     1.00     149     1.00     9,069
    4,736     1.16     511     27,328     184,206     1.00     149     1.00     9,766
    5,248     1.28     511     27,346     184,206     1.00     149     1.00     9,766
    5,760     1.41     511     27,346     184,206     1.00     149     1.00     9,766
    6,272     1.53     511     27,346     184,206     1.00     149     1.00     9,766
    6,784     1.66     511     27,346     184,206     1.00     149     1.00     9,766
    7,296     1.78     511     27,346     184,206     1.00     149     1.00     9,766
    7,808     1.91     511     27,346     184,206     1.00     149     1.00     9,766
    8,320     2.03     511     27,346     184,206     1.00     149     1.00     9,766
    Buffer Pool Advisory
    * Only rows with estimated physical reads >0 are displayed
    * ordered by Block Size, Buffers For Estimate
    P     Size for Est (M)     Size Factor     Buffers (thousands)     Est Phys Read Factor     Estimated Phys Reads (thousands)     Est Phys Read Time     Est %DBtime for Rds
    D     4,096     0.10     485     1.02     1,002     1     0.00
    D     8,192     0.20     970     1.00     987     1     0.00
    D     12,288     0.30     1,454     1.00     987     1     0.00
    D     16,384     0.40     1,939     1.00     987     1     0.00
    D     20,480     0.50     2,424     1.00     987     1     0.00
    D     24,576     0.60     2,909     1.00     987     1     0.00
    D     28,672     0.70     3,394     1.00     987     1     0.00
    D     32,768     0.80     3,878     1.00     987     1     0.00
    D     36,864     0.90     4,363     1.00     987     1     0.00
    D     40,960     1.00     4,848     1.00     987     1     0.00
    D     45,056     1.10     5,333     1.00     987     1     0.00
    D     49,152     1.20     5,818     1.00     987     1     0.00
    D     53,248     1.30     6,302     1.00     987     1     0.00
    D     57,344     1.40     6,787     1.00     987     1     0.00
    D     61,440     1.50     7,272     1.00     987     1     0.00
    D     65,536     1.60     7,757     1.00     987     1     0.00
    D     69,632     1.70     8,242     1.00     987     1     0.00
    D     73,728     1.80     8,726     1.00     987     1     0.00
    D     77,824     1.90     9,211     1.00     987     1     0.00
    D     81,920     2.00     9,696     1.00     987     1     0.00
    My shared pool size is 4gb and db_cache_size is 40Gb.
    Please help me in configuring the correct size for this.
    Thanks and Regards,

    Hi ,
    Actually batch load is taking too much time.
    Please find below the 1 hr awr report
         Snap Id     Snap Time     Sessions     Cursors/Session
    Begin Snap:     6557     27-Nov-11 16:00:06     126     1.3
    End Snap:     6558     27-Nov-11 17:00:17     130     1.6
    Elapsed:          60.17 (mins)          
    DB Time:          34.00 (mins)          
    Report Summary
    Cache Sizes
         Begin     End          
    Buffer Cache:     40,960M     40,960M     Std Block Size:     8K
    Shared Pool Size:     4,096M     4,096M     Log Buffer:     25,908K
    Load Profile
         Per Second     Per Transaction     Per Exec     Per Call
    DB Time(s):     0.6     1.4     0.00     0.07
    DB CPU(s):     0.5     1.2     0.00     0.06
    Redo size:     281,296.9     698,483.4          
    Logical reads:     20,545.6     51,016.4          
    Block changes:     1,879.5     4,667.0          
    Physical reads:     123.7     307.2          
    Physical writes:     66.4     164.8          
    User calls:     8.2     20.4          
    Parses:     309.4     768.4          
    Hard parses:     8.5     21.2          
    W/A MB processed:     1.7     4.3          
    Logons:     0.7     1.6          
    Executes:     1,235.9     3,068.7          
    Rollbacks:     0.0     0.0          
    Transactions:     0.4               
    Instance Efficiency Percentages (Target 100%)
    Buffer Nowait %:     100.00     Redo NoWait %:     100.00
    Buffer Hit %:     99.66     In-memory Sort %:     100.00
    Library Hit %:     99.19     Soft Parse %:     97.25
    Execute to Parse %:     74.96     Latch Hit %:     99.97
    Parse CPU to Parse Elapsd %:     92.41     % Non-Parse CPU:     98.65
    Shared Pool Statistics
         Begin     End
    Memory Usage %:     80.33     82.01
    % SQL with executions>1:     90.90     86.48
    % Memory for SQL w/exec>1:     90.10     86.89
    Top 5 Timed Foreground Events
    Event     Waits     Time(s)     Avg wait (ms)     % DB time     Wait Class
    DB CPU          1,789          87.72     
    db file sequential read     27,531     50     2     2.45     User I/O
    db file scattered read     26,322     30     1     1.47     User I/O
    row cache lock     1,798     20     11     0.96     Concurrency
    OJVM: Generic     36     15     421     0.74     Other
    Host CPU (CPUs: 24 Cores: 12 Sockets: )
    Load Average Begin     Load Average End     %User     %System     %WIO     %Idle
    0.58     1.50     2.8     0.7     0.1     96.6
    Instance CPU
    %Total CPU     %Busy CPU     %DB time waiting for CPU (Resource Manager)
    2.2     63.6     0.0
    Memory Statistics
         Begin     End
    Host Mem (MB):     131,072.0     131,072.0
    SGA use (MB):     50,971.4     50,971.4
    PGA use (MB):     545.5     1,066.3
    % Host Mem used for SGA+PGA:     39.30     39.70
    RAC Statistics
         Begin     End
    Number of Instances:     2     2
    Global Cache Load Profile
         Per Second     Per Transaction
    Global Cache blocks received:     3.09     7.68
    Global Cache blocks served:     1.86     4.62
    GCS/GES messages received:     78.64     195.27
    GCS/GES messages sent:     53.82     133.65
    DBWR Fusion writes:     0.52     1.30
    Estd Interconnect traffic (KB)     65.50     
    Global Cache Efficiency Percentages (Target local+remote 100%)
    Buffer access - local cache %:     99.65
    Buffer access - remote cache %:     0.02
    Buffer access - disk %:     0.34
    Global Cache and Enqueue Services - Workload Characteristics
    Avg global enqueue get time (ms):     0.0
    Avg global cache cr block receive time (ms):     1.7
    Avg global cache current block receive time (ms):     1.0
    Avg global cache cr block build time (ms):     0.0
    Avg global cache cr block send time (ms):     0.0
    Global cache log flushes for cr blocks served %:     1.4
    Avg global cache cr block flush time (ms):     0.9
    Avg global cache current block pin time (ms):     0.0
    Avg global cache current block send time (ms):     0.0
    Global cache log flushes for current blocks served %:     0.1
    Avg global cache current block flush time (ms):     0.0
    Global Cache and Enqueue Services - Messaging Statistics
    Avg message sent queue time (ms):     0.0
    Avg message sent queue time on ksxp (ms):     0.4
    Avg message received queue time (ms):     0.5
    Avg GCS message process time (ms):     0.0
    Avg GES message process time (ms):     0.0
    % of direct sent messages:     79.13
    % of indirect sent messages:     17.10
    % of flow controlled messages:     3.77
    Cluster Interconnect
         Begin      End
    Interface     IP Address     Pub     Source     IP     Pub     Src
    en9     10.51.10.61     N     Oracle Cluster Repository               
    Main Report
    * Report Summary
    * Wait Events Statistics
    * SQL Statistics
    * Instance Activity Statistics
    * IO Stats
    * Buffer Pool Statistics
    * Advisory Statistics
    * Wait Statistics
    * Undo Statistics
    * Latch Statistics
    * Segment Statistics
    * Dictionary Cache Statistics
    * Library Cache Statistics
    * Memory Statistics
    * Streams Statistics
    * Resource Limit Statistics
    * Shared Server Statistics
    * init.ora Parameters
    More RAC Statistics
    * RAC Report Summary
    * Global Messaging Statistics
    * Global CR Served Stats
    * Global CURRENT Served Stats
    * Global Cache Transfer Stats
    * Interconnect Stats
    * Dynamic Remastering Statistics
    Back to Top
    Statistic Name     Time (s)     % of DB Time
    sql execute elapsed time     1,925.20     94.38
    DB CPU     1,789.38     87.72
    connection management call elapsed time     99.65     4.89
    PL/SQL execution elapsed time     89.81     4.40
    parse time elapsed     46.32     2.27
    hard parse elapsed time     25.01     1.23
    Java execution elapsed time     21.24     1.04
    PL/SQL compilation elapsed time     11.92     0.58
    failed parse elapsed time     9.37     0.46
    hard parse (sharing criteria) elapsed time     8.71     0.43
    sequence load elapsed time     0.06     0.00
    repeated bind elapsed time     0.02     0.00
    hard parse (bind mismatch) elapsed time     0.01     0.00
    DB time     2,039.77     
    background elapsed time     122.00     
    background cpu time     113.42     
    Statistic     Value     End Value
    NUM_LCPUS     0     
    NUM_VCPUS     0     
    AVG_BUSY_TIME     12,339     
    AVG_IDLE_TIME     348,838     
    AVG_IOWAIT_TIME     221     
    AVG_SYS_TIME     2,274     
    AVG_USER_TIME     9,944     
    BUSY_TIME     299,090     
    IDLE_TIME     8,375,051     
    IOWAIT_TIME     6,820     
    SYS_TIME     57,512     
    USER_TIME     241,578     
    LOAD     1     2
    OS_CPU_WAIT_TIME     312,200     
    PHYSICAL_MEMORY_BYTES     137,438,953,472     
    NUM_CPUS     24     
    NUM_CPU_CORES     12     
    GLOBAL_RECEIVE_SIZE_MAX     1,310,720     
    GLOBAL_SEND_SIZE_MAX     1,310,720     
    TCP_RECEIVE_SIZE_DEFAULT     16,384     
    TCP_RECEIVE_SIZE_MAX     9,223,372,036,854,775,807     
    TCP_RECEIVE_SIZE_MIN     4,096     
    TCP_SEND_SIZE_DEFAULT     16,384     
    TCP_SEND_SIZE_MAX     9,223,372,036,854,775,807     
    TCP_SEND_SIZE_MIN     4,096     
    Back to Wait Events Statistics
    Back to Top
    Operating System Statistics - Detail
    Snap Time     Load     %busy     %user     %sys     %idle     %iowait
    27-Nov 16:00:06     0.58                         
    27-Nov 17:00:17     1.50     3.45     2.79     0.66     96.55     0.08
    Back to Wait Events Statistics
    Back to Top
    Foreground Wait Class
    * s - second, ms - millisecond - 1000th of a second
    * ordered by wait time desc, waits desc
    * %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
    * Captured Time accounts for 95.7% of Total DB time 2,039.77 (s)
    * Total FG Wait Time: 163.14 (s) DB CPU time: 1,789.38 (s)
    Wait Class     Waits     %Time -outs     Total Wait Time (s)     Avg wait (ms)     %DB time
    DB CPU               1,789          87.72
    User I/O     61,229     0     92     1     4.49
    Other     102,743     40     31     0     1.50
    Concurrency     3,169     10     24     7     1.16
    Cluster     58,920     0     11     0     0.52
    System I/O     45,407     0     6     0     0.29
    Configuration     107     7     1     5     0.03
    Commit     383     0     0     1     0.01
    Network     15,275     0     0     0     0.00
    Application     52     8     0     0     0.00
    Back to Wait Events Statistics
    Back to Top
    Foreground Wait Events
    * s - second, ms - millisecond - 1000th of a second
    * Only events with Total Wait Time (s) >= .001 are shown
    * ordered by wait time desc, waits desc (idle events last)
    * %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
    Event     Waits     %Time -outs     Total Wait Time (s)     Avg wait (ms)     Waits /txn     % DB time
    db file sequential read     27,531     0     50     2     18.93     2.45
    db file scattered read     26,322     0     30     1     18.10     1.47
    row cache lock     1,798     0     20     11     1.24     0.96
    OJVM: Generic     36     42     15     421     0.02     0.74
    db file parallel read     394     0     7     19     0.27     0.36
    control file sequential read     22,248     0     6     0     15.30     0.28
    reliable message     4,439     0     4     1     3.05     0.18
    gc current grant busy     7,597     0     3     0     5.22     0.16
    PX Deq: Slave Session Stats     2,661     0     3     1     1.83     0.16
    DFS lock handle     3,208     0     3     1     2.21     0.16
    direct path write temp     4,842     0     3     1     3.33     0.15
    library cache load lock     39     0     3     72     0.03     0.14
    gc cr multi block request     37,008     0     3     0     25.45     0.14
    IPC send completion sync     5,451     0     2     0     3.75     0.10
    gc cr block 2-way     4,669     0     2     0     3.21     0.09
    enq: PS - contention     3,183     33     1     0     2.19     0.06
    gc cr grant 2-way     5,151     0     1     0     3.54     0.06
    direct path read temp     1,722     0     1     1     1.18     0.05
    gc current block 2-way     1,807     0     1     0     1.24     0.03
    os thread startup     6     0     1     108     0.00     0.03
    name-service call wait     12     0     1     47     0.01     0.03
    PX Deq: Signal ACK RSG     2,046     50     0     0     1.41     0.02
    log file switch completion     3     0     0     149     0.00     0.02
    rdbms ipc reply     3,610     0     0     0     2.48     0.02
    gc current grant 2-way     1,432     0     0     0     0.98     0.02
    library cache pin     903     32     0     0     0.62     0.02
    PX Deq: reap credit     35,815     100     0     0     24.63     0.01
    log file sync     383     0     0     1     0.26     0.01
    Disk file operations I/O     405     0     0     0     0.28     0.01
    library cache lock     418     3     0     0     0.29     0.01
    kfk: async disk IO     23,159     0     0     0     15.93     0.01
    gc current block busy     4     0     0     35     0.00     0.01
    gc current multi block request     1,206     0     0     0     0.83     0.01
    ges message buffer allocation     38,526     0     0     0     26.50     0.00
    enq: FB - contention     131     0     0     0     0.09     0.00
    undo segment extension     8     100     0     6     0.01     0.00
    CSS initialization     8     0     0     6     0.01     0.00
    SQL*Net message to client     14,600     0     0     0     10.04     0.00
    enq: HW - contention     96     0     0     0     0.07     0.00
    CSS operation: action     8     0     0     4     0.01     0.00
    gc cr block busy     33     0     0     1     0.02     0.00
    latch free     30     0     0     1     0.02     0.00
    enq: TM - contention     49     6     0     0     0.03     0.00
    enq: JQ - contention     19     100     0     1     0.01     0.00
    SQL*Net more data to client     666     0     0     0     0.46     0.00
    asynch descriptor resize     3,179     100     0     0     2.19     0.00
    latch: shared pool     3     0     0     3     0.00     0.00
    CSS operation: query     24     0     0     0     0.02     0.00
    PX Deq: Signal ACK EXT     72     0     0     0     0.05     0.00
    KJC: Wait for msg sends to complete     269     0     0     0     0.19     0.00
    latch: object queue header operation     4     0     0     1     0.00     0.00
    gc cr block congested     5     0     0     0     0.00     0.00
    utl_file I/O     11     0     0     0     0.01     0.00
    enq: TO - contention     3     33     0     0     0.00     0.00
    SQL*Net message from client     14,600     0     219,478     15033     10.04     
    jobq slave wait     7,726     100     3,856     499     5.31     
    PX Deq: Execution Msg     10,556     19     50     5     7.26     
    PX Deq: Execute Reply     2,946     31     27     9     2.03     
    PX Deq: Parse Reply     3,157     35     3     1     2.17     
    PX Deq: Join ACK     2,976     28     2     1     2.05     
    PX Deq Credit: send blkd     7     14     0     4     0.00     
    Back to Wait Events Statistics
    Back to Top
    Background Wait Events
    * ordered by wait time desc, waits desc (idle events last)
    * Only events with Total Wait Time (s) >= .001 are shown
    * %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
    Event     Waits     %Time -outs     Total Wait Time (s)     Avg wait (ms)     Waits /txn     % bg time
    os thread startup     140     0     13     90     0.10     10.35
    db file parallel write     8,233     0     6     1     5.66     5.08
    log file parallel write     3,906     0     6     1     2.69     4.62
    log file sequential read     350     0     5     16     0.24     4.49
    control file sequential read     13,737     0     5     0     9.45     3.72
    DFS lock handle     2,990     27     2     1     2.06     1.43
    db file sequential read     921     0     2     2     0.63     1.39
    SQL*Net break/reset to client     18     0     1     81     0.01     1.19
    control file parallel write     2,455     0     1     1     1.69     1.12
    ges lms sync during dynamic remastering and reconfig     24     100     1     50     0.02     0.98
    library cache load lock     35     0     1     24     0.02     0.68
    ASM file metadata operation     3,483     0     1     0     2.40     0.65
    enq: CO - master slave det     1,203     100     1     0     0.83     0.46
    kjbdrmcvtq lmon drm quiesce: ping completion     9     0     1     62     0.01     0.46
    enq: WF - contention     11     0     0     35     0.01     0.31
    CGS wait for IPC msg     32,702     100     0     0     22.49     0.19
    gc object scan     28,788     100     0     0     19.80     0.15
    row cache lock     535     0     0     0     0.37     0.14
    library cache pin     370     55     0     0     0.25     0.12
    ksxr poll remote instances     19,119     100     0     0     13.15     0.11
    name-service call wait     6     0     0     19     0.00     0.10
    gc current block 2-way     304     0     0     0     0.21     0.09
    gc cr block 2-way     267     0     0     0     0.18     0.08
    gc cr grant 2-way     355     0     0     0     0.24     0.08
    ges LMON to get to FTDONE     3     100     0     24     0.00     0.06
    enq: CF - contention     145     76     0     0     0.10     0.05
    PX Deq: reap credit     8,842     100     0     0     6.08     0.05
    reliable message     126     0     0     0     0.09     0.05
    db file scattered read     19     0     0     3     0.01     0.05
    library cache lock     162     1     0     0     0.11     0.04
    latch: shared pool     2     0     0     27     0.00     0.04
    Disk file operations I/O     504     0     0     0     0.35     0.04
    gc current grant busy     148     0     0     0     0.10     0.04
    gcs log flush sync     84     0     0     1     0.06     0.04
    ges message buffer allocation     24,934     0     0     0     17.15     0.02
    enq: CR - block range reuse ckpt     83     0     0     0     0.06     0.02
    latch free     22     0     0     1     0.02     0.02
    CSS operation: action     13     0     0     2     0.01     0.02
    CSS initialization     4     0     0     6     0.00     0.02
    direct path read     1     0     0     21     0.00     0.02
    rdbms ipc reply     153     0     0     0     0.11     0.01
    db file parallel read     2     0     0     8     0.00     0.01
    direct path write     5     0     0     3     0.00     0.01
    gc current multi block request     49     0     0     0     0.03     0.01
    gc current block busy     5     0     0     2     0.00     0.01
    enq: PS - contention     24     50     0     0     0.02     0.01
    gc cr multi block request     54     0     0     0     0.04     0.01
    ges generic event     1     100     0     10     0.00     0.01
    gc current grant 2-way     35     0     0     0     0.02     0.01
    kfk: async disk IO     183     0     0     0     0.13     0.01
    Log archive I/O     3     0     0     2     0.00     0.01
    gc buffer busy acquire     2     0     0     3     0.00     0.00
    LGWR wait for redo copy     123     0     0     0     0.08     0.00
    IPC send completion sync     18     0     0     0     0.01     0.00
    enq: TA - contention     11     0     0     0     0.01     0.00
    read by other session     2     0     0     2     0.00     0.00
    enq: TM - contention     9     89     0     0     0.01     0.00
    latch: ges resource hash list     135     0     0     0     0.09     0.00
    PX Deq: Slave Session Stats     12     0     0     0     0.01     0.00
    KJC: Wait for msg sends to complete     89     0     0     0     0.06     0.00
    enq: TD - KTF dump entries     8     0     0     0     0.01     0.00
    enq: US - contention     7     0     0     0     0.00     0.00
    CSS operation: query     12     0     0     0     0.01     0.00
    enq: TK - Auto Task Serialization     6     100     0     0     0.00     0.00
    PX Deq: Signal ACK RSG     24     50     0     0     0.02     0.00
    log file single write     6     0     0     0     0.00     0.00
    enq: WL - contention     2     100     0     1     0.00     0.00
    ADR block file read     13     0     0     0     0.01     0.00
    ADR block file write     5     0     0     0     0.00     0.00
    latch: object queue header operation     1     0     0     1     0.00     0.00
    gc cr block busy     1     0     0     1     0.00     0.00
    rdbms ipc message     103,276     67     126,259     1223     71.03     
    PX Idle Wait     6,467     67     12,719     1967     4.45     
    wait for unread message on broadcast channel     7,240     100     7,221     997     4.98     
    gcs remote message     218,809     84     7,213     33     150.49     
    DIAG idle wait     203,228     95     7,185     35     139.77     
    shared server idle wait     121     100     3,630     30000     0.08     
    ASM background timer     3,343     0     3,611     1080     2.30     
    Space Manager: slave idle wait     723     100     3,610     4993     0.50     
    heartbeat monitor sleep     722     100     3,610     5000     0.50     
    ges remote message     73,089     52     3,609     49     50.27     
    dispatcher timer     66     88     3,608     54660     0.05     
    pmon timer     1,474     82     3,607     2447     1.01     
    PING     1,487     19     3,607     2426     1.02     
    Streams AQ: qmn slave idle wait     125     0     3,594     28754     0.09     
    Streams AQ: qmn coordinator idle wait     250     50     3,594     14377     0.17     
    smon timer     18     50     3,505     194740     0.01     
    JOX Jit Process Sleep     73     100     976     13370     0.05     
    class slave wait     56     0     605     10806     0.04     
    KSV master wait     2,215     98     1     0     1.52     
    SQL*Net message from client     109     0     0     2     0.07     
    PX Deq: Parse Reply     27     44     0     1     0.02     
    PX Deq: Join ACK     30     40     0     1     0.02     
    PX Deq: Execute Reply     20     30     0     0     0.01     
    Streams AQ: RAC qmn coordinator idle wait     259     100     0     0     0.18     
    Back to Wait Events Statistics
    Back to Top
    Wait Event Histogram
    * Units for Total Waits column: K is 1000, M is 1000000, G is 1000000000
    * % of Waits: value of .0 indicates value was <.05%; value of null is truly 0
    * % of Waits: column heading of <=1s is truly <1024ms, >1s is truly >=1024ms
    * Ordered by Event (idle events last)
              % of Waits
    Event     Total Waits     <1ms     <2ms     <4ms     <8ms     <16ms     <32ms     <=1s     >1s
    ADR block file read     13     100.0                                   
    ADR block file write     5     100.0                                   
    ADR file lock     6     100.0                                   
    ARCH wait for archivelog lock     3     100.0                                   
    ASM file metadata operation     3483     99.6     .1     .1                    .2     
    CGS wait for IPC msg     32.7K     100.0                                   
    CSS initialization     12     50.0                    50.0               
    CSS operation: action     21     28.6     9.5          61.9                    
    CSS operation: query     36     86.1     5.6     8.3                         
    DFS lock handle     6198     98.6     1.2     .1                    .1     
    Disk file operations I/O     909     95.7     3.6     .7                         
    IPC send completion sync     5469     99.9     .1     .0     .0                    
    KJC: Wait for msg sends to complete     313     100.0                                   
    LGWR wait for redo copy     122     100.0                                   
    Log archive I/O     3     66.7               33.3                    
    OJVM: Generic     36     55.6                              44.4     
    PX Deq: Signal ACK EXT     72     98.6     1.4                              
    PX Deq: Signal ACK RSG     2070     99.7               .0     .1     .0     .1     
    PX Deq: Slave Session Stats     2673     99.7     .2                         .1     .0
    PX Deq: reap credit     44.7K     100.0                                   
    SQL*Net break/reset to client     20     95.0                                   5.0
    SQL*Net message to client     14.7K     100.0                                   
    SQL*Net more data from client     32     100.0                                   
    SQL*Net more data to client     689     100.0                                   
    asynch descriptor resize     3387     100.0                                   
    buffer busy waits     2     100.0                                   
    control file parallel write     2455     96.6     2.2     .6     .6          .1          
    control file sequential read     36K     99.4     .3     .1     .1     .1     .1     .0     
    db file parallel read     397     8.8     .8     5.5     12.6     17.4     46.3     8.6     
    db file parallel write     8233     85.4     10.3     2.3     1.4     .4     .1          
    db file scattered read     26.3K     79.2     1.5     8.2     10.5     .6     .1     .0     
    db file sequential read     28.4K     60.2     3.3     18.0     18.1     .3     .1     .0     
    db file single write     2     100.0                                   
    direct path read     2     50.0                         50.0          
    direct path read temp     1722     95.8     2.8     .1     .5     .8     .1          
    direct path write     6     83.3                    16.7               
    direct path write temp     4842     96.3     2.7     .5     .2     .0     .0     .2     
    enq: AF - task serialization     1     100.0                                   
    enq: CF - contention     145     99.3     .7                              
    enq: CO - master slave det     1203     98.9     .8     .2                         
    enq: CR - block range reuse ckpt     83     100.0                                   
    enq: DR - contention     2     100.0                                   
    enq: FB - contention     131     100.0                                   
    enq: HW - contention     97     100.0                                   
    enq: JQ - contention     19     89.5     10.5                              
    enq: JS - job run lock - synchronize     3     100.0                                   
    enq: MD - contention     1     100.0                                   
    enq: MW - contention     2     100.0                                   
    enq: PS - contention     3207     99.5     .4     .1                         
    enq: TA - contention     11     100.0                                   
    enq: TD - KTF dump entries     8     100.0                                   
    enq: TK - Auto Task Serialization     6     100.0                                   
    enq: TM - contention     58     100.0                                   
    enq: TO - contention     3     100.0                                   
    enq: TQ - DDL contention     1     100.0                                   
    enq: TS - contention     1     100.0                                   
    enq: UL - contention     1     100.0                                   
    enq: US - contention     7     100.0                                   
    enq: WF - contention     11     81.8                              18.2     
    enq: WL - contention     2     50.0     50.0                              
    gc buffer busy acquire     2     50.0               50.0                    
    gc cr block 2-way     4934     99.9     .1                    .0     .0     
    gc cr block busy     35     68.6     31.4                              
    gc cr block congested     6     100.0                                   
    gc cr disk read     2     100.0                                   
    gc cr grant 2-way     4824     100.0     .0                              
    gc cr grant congested     2     100.0                                   
    gc cr multi block request     37.1K     99.8     .2     .0     .0     .0     .0     .0     
    gc current block 2-way     2134     99.9     .0                         .0     
    gc current block busy     7     14.3     14.3          14.3          28.6     28.6     
    gc current block congested     2     100.0                                   
    gc current grant 2-way     1337     99.9     .1                              
    gc current grant busy     7123     99.2     .2     .2     .0     .0     .3     .1     
    gc current grant congested     2     100.0                                   
    gc current multi block request     1260     99.8     .2                              
    gc object scan     28.8K     100.0                                   
    gcs log flush sync     65     95.4          3.1     1.5                    
    ges LMON to get to FTDONE     3                              100.0          
    ges generic event     1                         100.0               
    ges inquiry response     2     100.0                                   
    ges lms sync during dynamic remastering and reconfig     24                         16.7     29.2     54.2     
    ges message buffer allocation     63.1K     100.0                                   
    kfk: async disk IO     23.3K     100.0     .0     .0                         
    kjbdrmcvtq lmon drm quiesce: ping completion     9     11.1                              88.9     
    ksxr poll remote instances     19.1K     100.0                                   
    latch free     52     59.6     40.4                              
    latch: call allocation     2     100.0                                   
    latch: gc element     1     100.0                                   
    latch: gcs resource hash     1     100.0                                   
    latch: ges resource hash list     135     100.0                                   
    latch: object queue header operation     5     40.0     40.0     20.0                         
    latch: shared pool     5     40.0                    20.0     20.0     20.0     
    library cache load lock     74     9.5     5.4     8.1     17.6     10.8     13.5     35.1     
    library cache lock     493     99.2     .4     .4                         
    library cache pin     1186     98.4     .3     1.2     .1                    
    library cache: mutex X     6     100.0                                   
    log file parallel write     3897     72.9     1.5     17.1     7.5     .6     .3     .1     
    log file sequential read     350     4.6               3.1     59.4     30.0     2.9     
    log file single write     6     100.0                                   
    log file switch completion     3                         33.3          66.7     
    log file sync     385     90.4     3.6     4.7     .8     .5               
    name-service call wait     18          5.6     5.6     5.6     16.7     44.4     22.2     
    os thread startup     146                                   100.0     
    rdbms ipc reply     3763     99.7     .3                              
    read by other session     2     50.0          50.0                         
    reliable message     4565     99.7     .2     .0               .0     .1     
    row cache lock     2334     99.3     .2     .1                    .1     .3
    undo segment extension     8     50.0                    37.5     12.5          
    utl_file I/O     11     100.0                                   
    ASM background timer     3343     57.0     .3     .1     .1     .1          21.1     21.4
    DIAG idle wait     203.2K     3.4     .2     .4     18.0     41.4     14.8     21.8     
    JOX Jit Process Sleep     73                                   2.7     97.3
    KSV master wait     2213     99.4     .1     .2                    .3     
    PING     1487     81.0                                   19.0
    PX Deq Credit: send blkd     7     57.1          14.3     14.3          14.3          
    PX Deq: Execute Reply     2966     59.8     .8     9.5     5.6     10.2     2.6     11.4     
    PX Deq: Execution Msg     10.6K     72.4     12.1     2.6     2.5     .1     5.6     4.6     .0
    PX Deq: Join ACK     3006     77.9     22.1     .1                         
    PX Deq: Parse Reply     3184     67.1     31.1     1.6     .2                    
    PX Idle Wait     6466     .2     8.7     4.3     4.8     .3     .1     5.0     76.6
    SQL*Net message from client     14.7K     72.4     2.8     .8     .5     .9     .4     2.8     19.3
    Space Manager: slave idle wait     722                                        100.0
    Streams AQ: RAC qmn coordinator idle wait     259     100.0                                   
    Streams AQ: qmn coordinator idle wait     250     50.0                                   50.0
    Streams AQ: qmn slave idle wait     125                                        100.0
    class slave wait     55     67.3          7.3     1.8     5.5     1.8     7.3     9.1
    dispatcher timer     66     6.1                                   93.9
    gcs remote message     218.6K     7.7     1.8     1.2     1.6     1.7     15.7     70.3     
    ges remote message     72.9K     29.7     5.1     2.7     2.2     1.5     4.0     54.7     
    heartbeat monitor sleep     722                                        100.0
    jobq slave wait     7725                    .1          .0     99.9     
    pmon timer     1474     18.4                                   81.6
    rdbms ipc message     103.3K     20.7     2.7     1.5     1.3     .9     .7     40.7     31.6
    shared server idle wait     121                                        100.0
    smon timer     18                                        100.0
    wait for unread message on broadcast channel     7238                         .3          99.7     
    Back to Wait Events Statistics
    Back to Top
    Wait Event Histogram Detail (64 msec to 2 sec)
    * Units for Total Waits column: K is 1000, M is 1000000, G is 1000000000
    * Units for % of Total Waits: ms is milliseconds s is 1024 milliseconds (approximately 1 second)
    * % of Total Waits: total waits for all wait classes, including Idle
    * % of Total Waits: value of .0 indicates value was <.05%; value of null is truly 0
    * Ordered by Event (only non-idle events are displayed)
              % of Total Waits
    Event     Waits 64ms to 2s     <32ms     <64ms     <1/8s     <1/4s     <1/2s     <1s     <2s     >=2s
    ASM file metadata operation     6     99.8          .1     .1                    
    DFS lock handle     6     99.9               .1     .0               
    OJVM: Generic     16     55.6               2.8          41.7          
    PX Deq: Signal ACK RSG     3     99.9     .0     .1                         
    PX Deq: Slave Session Stats     3     99.9          .0               .0     .0     
    SQL*Net break/reset to client     1     95.0                              5.0     
    control file sequential read     1     100.0          .0                         
    db file parallel read     34     91.4     8.6                              
    db file scattered read     4     100.0     .0          .0                    
    db file sequential read     6     100.0     .0     .0     .0                    
    direct path write temp     11     99.8     .1     .1     .0                    
    enq: WF - contention     2     81.8               18.2                    
    gc cr block 2-way     1     100.0          .0                         
    gc cr multi block request     1     100.0          .0                         
    gc current block 2-way     1     100.0     .0                              
    gc current block busy     2     71.4     28.6                              
    gc current grant busy     8     99.9     .0     .1                         
    ges lms sync during dynamic remastering and reconfig     13     45.8     20.8     33.3                         
    kjbdrmcvtq lmon drm quiesce: ping completion     8     11.1     11.1     77.8                         
    latch: shared pool     1     80.0     20.0                              
    library cache load lock     26     64.9     14.9     12.2     4.1     4.1               
    log file parallel write     2     99.9     .0               .0               
    log file sequential read     10     97.1     2.0     .6     .3                    
    log file switch completion     2     33.3               66.7                    
    name-service call wait     4     77.8          22.2                         
    os thread startup     146               100.0                         
    reliable message     4     99.9          .0               .1          
    row cache lock     2     99.7                    .0     .0          .3
    Back to Wait Events Statistics
    Back to Top
    Wait Event Histogram Detail (4 sec to 2 min)
    * Units for Total Waits column: K is 1000, M is 1000000, G is 1000000000
    * Units for % of Total Waits: s is 1024 milliseconds (approximately 1 second) m is 64*1024 milliseconds (approximately 67 seconds or 1.1 minutes)
    * % of Total Waits: total waits for all wait classes, including Idle
    * % of Total Waits: value of .0 indicates value was <.05%; value of null is truly 0
    * Ordered by Event (only non-idle events are displayed)
              % of Total Waits
    Event     Waits 4s to 2m     <2s     <4s     <8s     <16s     <32s     < 1m     < 2m     >=2m
    row cache lock     6     99.7     .3                              
    Back to Wait Events Statistics
    Back to Top
    Wait Event Histogram Detail (4 min to 1 hr)
    No data exists for this section of the report.
    Back to Wait Events Statistics
    Back to Top
    Service Statistics
    * ordered by DB Time
    Service Name     DB Time (s)     DB CPU (s)     Physical Reads (K)     Logical Reads (K)
    ubshost     1,934     1,744     445     73,633
    SYS$USERS     105     45     1     404
    SYS$BACKGROUND     0     0     1     128
    ubshostXDB     0     0     0     0
    Back to Wait Events Statistics
    Back to Top
    Service Wait Class Stats
    * Wait Class info for services in the Service Statistics section.
    * Total Waits and Time Waited displayed for the following wait classes: User I/O, Concurrency, Administrative, Network
    * Time Waited (Wt Time) in seconds
    Service Name     User I/O Total Wts     User I/O Wt Time     Concurcy Total Wts     Concurcy Wt Time     Admin Total Wts     Admin Wt Time     Network Total Wts     Network Wt Time
    ubshost      60232     90     2644     4     0     0     13302     0
    SYS$USERS      997     2     525     19     0     0     1973     0
    SYS$BACKGROUND      1456     2     1258     14     0     0     0     0
    I am not able to paste the whole awr report. I have paste some of the sections of awr report.
    Please help.
    Thanks and Regards,

  • How to set the resource_limit parameter to each user

    how to set the resource_limit initialization parameter to each user.
    it says like this;
    You must modify the RESOURCE_LIMIT initialization parameter. After you assign profiles to users, the Oracle database
    enforces the limits only when the RESOURCE_LIMIT parameter is set to TRUE. Therefore, you modify the RESOURCE_LIMIT initialization parameter to enforce the resource limits defined within each user's profile.
    alter system set resource_limit=true;
    if doing like this is it ok. ????
    Assume im logged as user "SYS". so if i use this command, will it alter the resource_limit parameter for this user SYS only OR for the entire database..... (for all other user)

    The RESOURCE_LIMIT parameter only enables resource limits that are defined in profiles.
    The DEFAULT profile, by default, is UNLIMITED for all resources.
    You should create a custom profile and set the limits you need. The next step would be to assign that profile to the users whom you want to limit. Other users in other profiles (or in the DEFAULT profile) would not have any limits enforced.
    See the documentation on CREATE PROFILE.
    See http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_6010.htm#i2065930

  • How to set the default settment rule for the same kind project.

    hi experts:
       the project of the same kind of the project profile have the same settment rule to one account (G/L).
    how to set the default settment rule for the project of  this kind of the project profile.
    regards

    Hi,
      You need to define the settlement profile and allocation structure.
    next you need to define the  Strategy for settlement rule.
    navigation-PS> costs> automatic and periodic allocations> settlement> Settlement rule for WBS
    --> Define strategy for settlement rule.
    Select the strategy and click on settings. in that new entries, check the Acc Assg element, enter Settlement profile and mention accass category as reposnsible cost center.
    Save this transaction.
    Now create a project assgin responsible costcenter for the WBS element in the project buider and save the transaction.
    Now run CJB2 transaction for the project, settlement rule will generated automatically.
    even you can configure the same for profitability segment.
    Rgds
    Sudhir Reddy

  • How to set the classpath in CVM?

    Hi everybody,
    experimenting with the J2ME Personal Profile Runtime Environment on a Linux PC I wonder how to set the classpath. The command line options only allow me to set the bootclasspath.
    My original problems deals with determining the codebase for a class that is contained in a jar.
    1) If I put this jar into the bootclasspath, that class is found and can be loaded, but the codebase (retrieved using class.getProtectionDomain().getCodeSource) is NULL.
    2) If I put it into the classpath by using the command line option -Djava.class.path=... the class cannot be found by the ClassLoader.
    3) If I put the jar into both, the classpath and the bootclasspath, the latter one is applied and result 1) shows up.
    Any idea how to work around this?

    @see http://forum.java.sun.com/thread.jsp?forum=8&thread=410868

  • How to set the Server CLASSPATH?

    Hi all Oracle Java experts,
    I know this is a rather stupid questions:
    Where can I set the CLASSPATH of the Servlet Engine in Oracle 8.1.7.?
    I spent hours now searching the documentation and found loads of hints what to add to the CLASSPATH in which circumstances, but not how to... Of course I know how to use the CLASSPATH in a normal Java environment, but not in the OSE.
    In the "Oracle8i Application Developer's Guide - XML" it says in the "Using XSQL Servlet" Chapter:
    "How you set the CLASSPATH of the web server's Servlet environment and how you associate a Servlet with a file extension are done differently for each web server. The XSQL Servlet's Release Notes contain detailed setup information for specific web servers you might want to use with XSQL Pages."
    Unfortunately, the Release Notes contain this information for Tomcat, Apache JServ etc., but not for Oracle's own Servlet Engine... Maybe you should include that information.
    Thanks for any help;-)
    Cheers
    Olaf
    null

    Not sure if I understatnd the context in which you want to set your classpath.
    IDE, java or system but ...
    look at the profile file /etc/profile
    CLASSPATH= "/usr/local/jdk1.4......"
    export CLASSPATH
    or
    javac -classpath .;/usr/local/jkd1.4.... test.java
    or
    whatever your ide provides.

Maybe you are looking for

  • Problem with Message Collecting in BPM

    Hello, I want to develop a Business Process, which collects messages with the same ID. After 5 minutes the process should send all messages in one new message. I copieed the XI 3.0 Demo Process "BpmPatternCollectTime". My problem is, that only the fi

  • Airport kicks out when I connect to TV

    I managed to connect my MBP to my 40" HDTV (Toshiba) using a mini display port to HDMI adapter and cable and then, by selecting "mirror images" I got the desktop to function on the TV. Problem is, when I connect to the TV, my airport wireless (using

  • PULL DOWN MENU

    IN HR REPORT I HAVE TO USE STANDARD SELECTION SCREEN THIS WIIL GET WHEN I USE LOGICAL DATABASE. BUT I NEED ONE MORE SELECTION PARAMETER WHICH HAS PULL DOWN MENU . CAN ANY BODY PLS LET ME KNOW HOW TO GET PULL DOWN MENU IN SELECTION SCREEN

  • When I click on New Tab a new tab will not open, new window does open, how do I open new Tab? used to work

    New Tab feature no longer works, only new window

  • Moving App to Dock

    I am not able to move an app to the dock on my iPhone 5.  I can move the app from page to page, but when I drag the app to the dock, it bounces back to its original position.  Please advise.