How to set the iphone overseas to avoid data and phone charges

Can someone tell me what settings to change on my iphone 4 to avoid email coming in and getting huge data charges when I travel overseas?? I still want to receive texts and use the phone when I choose to turn it on.
Suzie

Something else you can do is call your wireless carrier and inform them you will be travelling overseas and they can either disable your internet access on their end to ensure you dont recieve any roaming or data charges or they will over you an overseas data plan for x amount of mb for x amount of dollars (it varies depending on your carrier). If you choose to take the overseas data plan you can keep your cellular data off (so you dont use up your data plan) but still be able turn it on incase you need to access the internet for whatever reason. It comes in handy if you ever get lost or need to find something and you dont have access to wi-fi.

Similar Messages

  • How to set the POV in WebAnalysis when data source is HFM?

    Hi Every one..
    Could any one tell how to set pov in web analysis when data base is HFM. And hoe to make the report Dynamicall (Current Pov Member like in FR). for this if use Essbase Ican get it it easiliy by using Subtitutional variable but is ti possible fo rHFM.
    Thnaks in advance
    Rao

    yeas agree with sanakar,
    this field which shankar is talking about must be entry date (if u delta timestamp is date, u will also have to mention this table field name in definition of delta), this means that this field will catch last change to the record, so that it will be delta enabled based on the latest change date. This is very important becuase if u use date like posting date to the delta then back dated posting will not captured in to the delta, as delta for this back date is already been done.
    Hope u understand this.

  • How to set the Codec, Frame rate, Bit rate, and Resolution for iMovie 10.0.5

    To upload a video to Vimeo, I need to be able to set the codec, frame rate, bit rate and resolution to make sure the file is compressed to under 500 MB. Where in iMovie 10.0.5 am I given the option to adjust these settings?
    Thank you!

    Another question is in continuous mode, NI DAQmx uses Samples per channel to determine the buffer size. But according to the website you specified, it says if the acquisition is continuous (sample mode on the DAQmx Timing.vi is set to Continuous Samples), NI-DAQmx will allocate a buffer according to the following table. And for sample rate between 100 - 10,000 S/s, the buffer size is 10 kS. So if I set the sample rate to be 5000 S/s, and set the Samples per channel to be 20000, then what exactly the buffer size is? 20 kS or 10 kS?
    Thanks.

  • How to set the bind variable on page load and execute query ?

    Hi All,
    I am using Jdeveloper 11.1.1.5
    I have a table called "Employee"
    Columns :- id , name , location
    Data :- 1, ,james , chicago
    2 ,Raj ,capetown
    Now i have another webservice(created as a webservice dataControl) which sends me the "id" on each time my page loads.Now the id which has been returned by webservice should be incorporated in my VO Query as in where clause to fetch the data for the respective "id" in that "Employee" table and should be rendered on form.
    Eg :- Id "2" has been sent by the webservice then the record should be fetched from database should be "2","raj","capetown".
    I know that there would be necessity of bind variable , but how do i set the bind variable on page load ?
    How can i use the bind variable appropriately ??
    Please suggest !!!!
    Thanks.

    Hi,
    Check
    http://www.orastudy.com/oradoc/selfstu/fusion/web.1111/b31974/web_services.htm#CJADCDBG
    http://thepeninsulasedge.com/frank_nimphius/2011/02/18/adf-code-corner-sample-73-released-hands-on-creating-a-search-form-using-a-pojo-ws-and-the-web-service-data-control/
    -Suresh

  • It says the itunes software is up to date, the iphone is up to date and it is plugged in. Any suggestions? Thanks!

    my iphone 4S is not showing up under devices in my itunes account. It says the itunes software is up to date, the iphone is running on iOS6.0.1,so I think that is up to date as well. I have tried plugging it in again and pulling it out. Any suggestions?

    You don't say what version of OS X you're running.  If you're trying to sync running iOS 6 you'll need OS X 10.5.8 or later and iTunes 10.6.3 or later.  There are other troubleshooting steps here: iPhone not recognized in iTunes for Mac.

  • How to set the delta for existing generic data source

    Hi BW Guru's
    I have a problem,actually i have a exsting generic data source"ZFRBHRCHY". Master data Object ZFRBHRCHY  is getting laoded from all some R/3 Clusters on a Daily Basis. It is full load and takes 4 to 5 Hours, but number of added records(2000) are very less,while total records are more(40Lks).For avoiding this larger load time every day,i want to implement delta extraction for this.
    How to implement this,(i want steps for this) .
    Thanks in advance,
    Regards
    reddy

    yeas agree with sanakar,
    this field which shankar is talking about must be entry date (if u delta timestamp is date, u will also have to mention this table field name in definition of delta), this means that this field will catch last change to the record, so that it will be delta enabled based on the latest change date. This is very important becuase if u use date like posting date to the delta then back dated posting will not captured in to the delta, as delta for this back date is already been done.
    Hope u understand this.

  • How to set the time difference between each data when sweeping voltage using keithley 2400

    Hello friends,
    I am using the sweep vi from Keithley in the SWEEP and Acquire measurement vi.I want to measure the voltage for every step and insert a delay in between every two data, so I need some delay between each I step.
    I am a starter to use Labview, thanks so much for your answers.
    Perry
    Solved!
    Go to Solution.
    Attachments:
    Keithley 24XX Sweep and Acquire Measurements.vi ‏26 KB

    As Dennis said, if you're using the built-in sweep function, you'll have to check the manual. See Section 10-16 (That's section 10 page 16, not sections 10 though 16) of the Keithley 2400 User Manual.
    The Keithley 24xx series has a measurement speed in units called PLC (Power Line Cycles). The default speed is 1PLC, meaning a measurement is taken every 1 power line cycle, or 1/60th of a second (16.67ms). 24XX's can go from 0.01 PLC (every 0.16ms) to 10 PLC (every 166.6ms). The faster you measure, the lower precision you get.
    To set this value programmatically, the command is
    ENSe:CURRent:NPLCycles <n>
    ENSe:VOLTage:NPLCycles <n>
    depending on what you're sensing and where <n> is the number of PLCs from 0.01 to 10.
    Another factor that will determine the time between data points is the SDM cycle. These are more complicated, look at your Keithley user manual for more information. Look at Section 6 and Section 11 for more info.
    Note:
    PLC times are based on a US cycle of 60Hz.

  • How do I set the iPhone 4s to answer in 5 rings?

    How do I set the iPhone 4s to answer in 5 rings?

    You would have to contact your carrier about the time before voicemail.

  • How to get the iPhone to remember the "manually manage" setting?

    The first time I plugged in my iPhone, I set it to "manually manage" under options. I am attempting to sync my iPhone to the same computer each time, but each time I plug in my iPhone, it forgets the "manually manage" setting. If I go to click the manually manage setting again, it wants to "erase and sync". I have done the "erase and sync" on the phone twice now and don't want to do it again - it is laborious to set up the library and playlists and podcasts over and over again. When I plug it in, despite having set the manually manage last time I sync'd, it won't let me drag anything into the iPhone (the iPhone music and podcast libraries are greyed out, and the manually manage checkbox under options is not checked).
    How can I make iTunes remember the "manually manage" setting so I don't have to resync the entire library each and every time?

    Hi Elisabeth,
    A couple of things you could try that might help out.
    First try resetting the iphone by holding down the power button on top of the iphone and the home button at the same time until you see just an apple logo. Then try connecting to itunes and setting the manually manage.
    If that does not work something might have become corrupted on the iphone and you can try a restore. This will completely erase the iphone and set it back to factory defaults. If you choose the restore option, after the restore you will see an option the restore from back up. Don't restore from back up, instead choose set up as new iphone. This way if any thing was corrupted previously to restoring the iphone you won't run the risk of putting it back on the iphone. Then you will se a page asking if you want to sync all music, video,... Make sure to uncheck this box since you are trying to set the iphone to manually manage.
    Here are a couple of articles from the apple support website that might help out.
    http://support.apple.com/kb/HT1737
    http://support.apple.com/kb/HT1414
    Hope this helps.

  • How do i set the iphone to auto sync with the mac book pro

    how do i set the iphone to auto sync with the mac book pro?

    Iphone Sync Support wrote:
    Thanks but this is not what I am looking for.  I am looking for the settings - setting that allows our iphone to auto sync with your mac book when you make a puchase on either device.
    You aren't going to sync with my MacBook when I make a purchase.
    And you are not going to autosync your iPod with the MacBook unless you tell it to sync or plug it in.
    You can enable Automatic downloads when you make a purchase.
    iTunes settings > Store.
    When you make a purchase, it will automatically download that purchase to devices set up the same way.
    This is not the same as autosyncing your device to your computer (as you first asked).

  • How do you set the Iphone 5 to go to voicemail on the 2nd ring, not the 5th ring?

    How do you set the IPhone 5 (C) to go to voicemail on the 2nd ring instead of the 5th ring.  This phone is for my private practice and I will lose clients if the phone rings too many times before it is answered by my voicemail greeting.

    Contact your wireless provider.

  • How easy is the iphone to set up if bought online?

    how easy is the iphone to set up if bought online

    If you purchase an officially unlocked iPhone it won't come with a sim. When you get the phone contact your carrier or go to one of their stores & get a new sim. They will transfer your number & activate the sim. If you purchase a phone locked to your carrier, it will come with a sim installed & pre-activated. All you have to do is setup the phone to complete activation.

  • How to prolong the bluetooth timeout session on ipad and iphone

    how to prolong the bluetooth timeout session on ipad and iphone?
    I understannd that the standard timeout setting is 3 mins. what if I want to prolong the connection duration, how should I do?
    thanks

    To my knowledge, there is no "time out" on a device.  A mouse, KB, etc will go into a low power mode after a short period of non-use.
    Barry

  • Me and my partner are currently using the same apple id and have no space left on our devices. We are currently waiting on the iphone 6 plus to arrive and don't know how to transfer all data to the new phones.

    Me and my partner are currently using the same apple id and have no space left on our devices. We are currently waiting on the iphone 6 plus to arrive and don't know how to transfer all data to the new phones.?

    I don't know if I'm asking this all in a way that can be understood? Thanks ED3K, however that part I do understand (in the link you provided!)
    What I need to know is "how" I can separate or rather create another Apple ID for my son-who is currently using "my Apple ID?" If there is a way to let him keep "all" his info on his phone (eg-contacts, music, app's, etc.) without doing a "reset?') Somehow I need to go into his phone's setting-create a new Apple ID and possibly a new password so he can still use our combined iCloud & Itunes account?
    Also then letting me take back my Apple ID & password, but again allowing us (my son and I) to use the same iCloud & Itunes account? Does that make more sense??? I'm sincerely trying to get this cleared up once and for all----just need guidance from someone who has a true understanding of the whole Apple iCloud/Itunes system!
    Thanks again for "anyone" that can help me!!!

  • How to get the iPhone 5c to pair with my mac book pro and my ue speaker

    How to get the iphone 5c to pair with my mac book pro and my ue speaker

    TerryReynar wrote:
    How to get the iphone 5c to pair with my mac book pro
    You don't. It only sync using iTunes.
    It doesn't "pair".
    and my ue speaker
    What is "ue speaker"?
    Ultimate Ears wirless bluetooth speaker?
    Set speaker to Pairing mode.
    On the iPhone, Settings > BlueTooth.
    Select the speaker.

Maybe you are looking for