How to set the magic wand tolerance once for all ?

Each time i open illustrator i have to set the tolerance to the one i used last ime, it has not been saved
In opposite to all other settings which are staying the same. how to save it once for all ?
i tryed to saved my workspace , doesnt work
in preference settings, nothing... !
thanks for helping

Two other suggestions: save it in the new document profile or open the preferences file (it's a text file, maybe the options are stored there and you can edit them)

Similar Messages

  • How to set the zoom out or in for all pages permanently?

    I wish to set my page size one size smaller than the default.
    The result of ctr - (zoom out) is exactly what I want (it decreases the size of text AND images). However this effect only lasts for the page I am currently on, as soon as I navigate to a different page (or just refresh the page I am at), it reverts back to the default size.
    I looked at Tools->Options->Content, however that deals only with text size (besides it looks only certain pages are affected by this setting anyway).
    In other words, how (or where) do I set my browser to automatically decrease size or 'Zoom Out' for all the pages I visit in order not to set it manually for every page every time.
    Regards
    PS.
    If this setting can be applied for individual users (I have a multi user PC) that would be even better, although I would be very grateful if I could just set it.
    PPS.
    Additional information. I just discovered it seems to be working now in normal browsing but not in private browsing, my apologies for the omission.

    Default FullZoom Level extension:
    https://addons.mozilla.org/en-US/firefox/addon/6965

  • Without to change the setting.how to set the decimal place to 7 for an UDF.

    Without to change the setting, how to set the decimal place to 7 for an UDF?

    Hi
    Once you create a UDF it will automatically be binded to the data source of data type that you gave at the time of creating UDF.
    So i think you can not set the decimal places without changing the setting in display parameters.
    i am not sure whether it will work or not one thing you can try is that create it as a alphanumeric data type and convert your decimal value to sting and then assign it to UDF,While retrieving for any manipulation you convert it as decimal.
    Hope it helps you
    Regards
    Vishnu

  • How to set the gain and input coupling for each channel on a NI 4462 DaQ card?

    I've seen a few examples in how to set the gain for NI 4462, but none tell me how to chose the channel I wish to set this gain.  Also the same problem with input coupling
    Does anyone know how to set the gain and input coupling for each individual channel?
    Thanks,
    Hector
    LabView 8.5 Windows XP

    Hey Hector,
    http://forums.ni.com/ni/board/message?board.id=100&thread.id=1688
    This has a few examples of how to do that.  Let me know if you have further questions.
    Have fun!
    -gaving

  • How to set the Mail and Fax options  for the Smartforms ???

    How to set the Mail and Fax options  for the Smartforms ??? Please reply me very soon. Its a life deciding question now for me. Please .

    >
    veera Karthik wrote:
    > How to set the Mail and Fax options  for the Smartforms ??? Please reply me very soon. Its a life deciding question now for me. Please .
    Hi
    Check this Link:
    http://help.sap.com/saphelp_nw04/helpdata/en/a5/28d3b9d26211d4b646006094192fe3/frameset.htm
    P.S: Never say reply me soon....people answer you here voluntarily and as everyone has their own desk to manage...sp replies may late or early..depending upon the availabality of the members.
    Vishwa.

  • How to set default User preferences in Analyzer for all users

    How to set default User preferences in Analyzer for all users<BR><BR>Hi,<BR><BR>I would like to set some settings in Analyzer as default for all users. For example:<BR>1. Display | Char<BR>2. right mouse click on char | Chart Properties<BR>3. Axes tab<BR>4. "Format: Currency" i would like to change to "Format: Number".<BR><BR>How to set default values to all users? Is this possible?<BR><BR>Thanks,<BR>Grofaty

    I'm pretty sure higher access superceedes, so you could set up a group with no actual access, just to get the preferences working, then their individual security will dictate what they can do. I haven't tested this fully, but I beleive this is how it will work.<BR>As far as setting the preferences, go into the admin console and right click on the group, then select Preferences. To apply the group preferences to a user, add the user to the group, then right click on the user, select preferences and from the upper left corner, use the drop down to select the active preference, in this case, it will be the group you created and added them to.<BR><BR>HTH

  • How to get the file size (in bytes) for all files in a directory?

    How to get the file size (in bytes) for all files in a directory?
    The following code does not work. isFile() does NOT recognize files as files but only as directories. Why?
    Furthermore the size is not retrieved correctly.
    How do I have to code it otherwise? Is there a way of not converting f-to-string-to-File again but iterate over all file objects instead?
    Thank you
    Peter
    java.io.File f = new java.io.File("D:/todo/");
    files = f.list();
    for (int i = 0; i < files.length; i++) {
    System.out.println("fn=" + files);
    if (new File(files[i]).isFile())
         System.out.println("file[" + i + "]=" + files[i] + " size=" + (new File(files[i])).length() ); }

    pstein wrote:
    ...The following code does not work. Work?! It does not even compile! Please consider posting code in the form of an SSCCE in future.
    Here is an SSCCE.
    import java.io.File;
    class ListFiles {
        public static void main(String[] args) {
            java.io.File f = new java.io.File("/media/disk");
            // provides only the file names, not the path/name!
            //String[] files = f.list();
            File[] files = f.listFiles();
            for (int i = 0; i < files.length; i++) {
                System.out.println("fn=" + files);
    if (files[i].isFile()) {
    System.out.println(
    "file[" +
    i +
    "]=" +
    files[i] +
    " size=" +
    (files[i]).length() );
    }Edit 1:
    Also, in future, when posting code, code snippets, HTML/XML or input/output, please use the code tags to retain the indentation and formatting.   To do that, select the code and click the CODE button seen on the Plain Text tab of the message posting form.  It took me longer to clean up that code and turn it into an SSCCE, than it took to +solve the problem.+
    Edited by: AndrewThompson64 on Jul 21, 2009 8:47 AM                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • How to set user preferred timezone in OBIEE for all objects.

    How to set user preferred timezone in OBIEE for all objects based on users TZ(may be from @{session.timeZone}). without changing My Account -> Preferences

    Check
    Time Zone Specification from http://docs.oracle.com/cd/E12844_01/doc/bip.1013/e12187/T421739T481157.htm#4535403
    just in case https://blogs.oracle.com/xmlpublisher/entry/how_to_keep_your_dates_from_go

  • How to set the BARCODE width and length for label printing..

    Hi All,
    How to set the Code 39 barcode label format in the sizxe of 0.20" * 1.4". By default while printing barcode size exceeds my current requirement. Please let me know to customize the size of barcode labels.
    Thanks.

    I don't know what you mean by "Code 39" because my Output Designer software doesn't offer that barcode (or do you mean "code 3 of 9?). In any case, are you trying to control the size of the text (which is what I think of when you refer to "label")? If you are, then just change the font & size. If you are wanting to modify the physical characteristics of the barcode itself (height & length for a certain number of characters) then you are probably out of luck. Or at least in for some trial & error.
    There are a series of "barcode.xxx" files in the 'config' folder where Output Designer was installed to. These are text files that contain the physical characteristics of the various barcodes for various printers. The parameters that you would be interested in is the height and width of the bars (black & white). For example, a barcode might be defined as .400 high with narrow bars 3 "dots" wide, wide bars 9 "dots" wide and white space the same or different. Presumably changing these values would affect the generated barcode. For example, in this example the wide bars are 3 times the width of the narrow bars so I would assume that relationship would have to remain. To make the resulting barcode shorter you would then use 2 for the narrow and 6 for the wide.
    You would have to make the change in the file(s) that would be used for your printer(s).
    There are four width values for each of the parameters. Most of the barcodes only use 2 but some have 4. I'm assuming that when there are 4, like in "4 8 12 16", that the barcode definition has 4 different widths of bars and/or spaces.
    There is no guarantee that the scanning hardware & software will "see" and interpret the resulting barcode correctly.

  • How to Set the APPR status in Background for service orders

    Hi Friends,
    could anybody please ,let me know how to set the APPR satus for the seleted service orders( IW32) in background?
    Regards,
    Xavier.P.

    Hi,
    Thanks for the reply and you are correct, I am using BADI and I am calling this BAPI inside the method.
    Now I am trying to execute this BAPI from SE38 and I am getting the error message, "Error in processing ,Function was not executed". I am able to see this message in the return parameter of the BAPI (Error type - 'E'). And it is giving dump after the call to BAPI_TRANSACTION_COMMIT.
    I am using conversion routine 'CONVERSION_EXIT_ABPSN_INPUT' before passing the WBS element to the BAPI.
    Please help in this regard.
    Regards,
    V Kumar
    Edited by: V Kumar on Jun 26, 2009 1:42 PM

  • How to set the default Maximun idle time for servlets

    Hello I'm trying to set the default maximun idle time for servlets in Contenedor Release 1.0.2.2.1, but I dont know where to do it. Please somebody help me!!

    Saul,
    Are you trying to setup the session timeout ? If so please look at the Web FAQ at http://otn.oracle.com/tech/java/oc4j/htdocs/OC4J-WEB-FAQ.html#7
    regards
    Debu Panda
    Oracle

  • How to set a customized search results template for all users

    Hi.
    I know the customized search results views are stored in a file called pne_portal.hda that resides on every user's subfolder in data/users/profiles/...
    Is there a way to set a customized search results template for all users? If it's impossible, is there a way to modify the Headline view? I'm not able to find the resource or template where this view is.
    Thanks in advance.

    I wasn't able to understand what was meant by this post. Therefore, I modified the standard template HeadLine View.
    Columns for this template are defined in the include slim_search_result_table_header_setup (in std_page.htm).
    Here is the modification of the code:
    <$if customTemplateId and not (baseTemplateId like customTemplateId)$>
              <$columnsString = utGetValue("customlisttemplates/" & strLower(customTemplateId), "columns")$>          
              <!-- Modify START by Oracle-->
         <$else$>
    <!-- here add default fields -->
              <$columnsString="dDocName,dDocTitle,dInDate,dDocAuthor"$>
    <!-- here add your custom fields -->
              <$columnsString=columnsString&",xComment"$>
              <!-- Modify END by Oracle-->
         <$endif$>

  • How to set the physical inventory tolerance ?

    Hello
    We need to set the tolerance limit such us more than 20 % or more or less than  nos qty can only be posted in the physical inventory process.10 in stock means the user cannot post less than 8 etc. how to  achieve it .Any help will be highly appreciated

    Hi Nick,
    pls. have a look at the following document:
    http://help.sap.com/bp_bblibrary/600/Documentation/J73_BB_ConfigGuide_EN_DE.doc
    and search for tolerance within the document, it should tell you what you are looking for.
    Pls. reward if helpful.
    Best regards,
    Enrico

  • How to set the PSSigGetSigValueParams.sigMode and subfilter for a PubSec plugin

    Hi,
    My PubSec plugin, based on DocSign sample, has its  PSSigGetSigValueParams.sigMode value to kPSSigMethodPKCS1 by default. I am creating PKCS7 signatures, but due to this default value i cannot.
    My questions:
    1 - My understanding is that to create PKCS7 signatures my subfilter should be adbe.PKCS7.detached or sha1. And i assume that PSSigGetSigValueParams.sigMode value in sigGetSigValue() is also related, but its constant and cannot be set. how can i set the subfilter and sigMode values so that my plugin starts creating pkcs7 signatures?
    2 - I cannot find a documentation which would describe the detailed process of creating and validating signatures using PubSec, in the same way it is described for DigSig. Can you point out such a document so i dont have to ask these basic questions?
    3 - Is there any sample available which creates PKCS7 signatures?
    thanks in advance.

    OK... i am answering myself again.
    1 - Ans: How can i set the subfilter value for a PKCS7 signature in my plugin
    2 - Ans: I still cannot find any detailed documentation. I just debugged the plugin and found out answers for myself.
    3 - Ans: And i still dont know if there is any PKCS7 signature creating sample. but if u use the DocSign sample and follow the steps described in 1-Ans above, then you can easily create PKCS7 signatures.
    So, i am considering my question answered. hope it helps others aswell.

  • How to set the 4th Y axis color for a line graph

    Hello experts,
    I have developed a multiple y axis line graph using oracle reports 10g.
    It has got 1 x axis and 4 axes. I am able to set the color of the the first three y axes
    but the reports designer automatically assigns yellow color to the 4th axis.
    I mean there is no option in the graph wizard for changing the 4th color)
    How to change the color of this 4th y axis to a desired color?
    Cheers
    Sri

    Assuming you mean that your graph has 4 series, not 4 Y axes, you might try something like this:
    1. Save a backup copy of your current report in case the changes you are about to make don't work out and you want to revert to the backup copy.
    2. Using the Property Inspector, display the current value of the Graph Settings property for your graph. The value of the property should be something like:
    <rw:graph id...
    </rw:graph>3. Look for a <SeriesItems> tag and a matching </SeriesItems> tag in the property value. If you don't find them, add the following two lines immediately before the </Graph> tag.
    <SeriesItems>
    </SeriesItems>4. Between the <SeriesItems> tag and the matching </SeriesItems> tag, add (or update) a <Series> tag for each series that you want to specify the color for. For example, to specify the color of the fourth series as red, you would use a <Series> tag like this:
    <Series id="3" color="#ff0000"/>Note that the id numbers start at 0 for the first series, 1 for the second, and so on. The color value is a hexadecimal number specifying the RGB value of the color.
    You can also use the <Series> tag to specify other features like the marker shape.
    For more information on what you can do using the Graph Settings property, see this FAQ and Technical Note.
    Hope this helps.

Maybe you are looking for