How to set the magnifier in I phone

How to set the magnifier in I phone?

Touch anywhere on the iPhone screen with three fingers at the same time and double-tap. This should remove the magnification setting and restore the default resolution.

Similar Messages

How to set the number of rings for the agent phone rings before it get the not prepared state

hi, how to set the number of rings for the agent phone rings? before it get the not prepared state.
thanks

The following assumes that you are using ICM with an IPIVR etc (not using CVP), as the answer is different for CVP
What you are looking for is called "Ring no answer time". It is set in the Agent Desk Setting List tool.
Regards,
Kevin

How to set the parameter

hi i am creating xml publisher and from OAF with parameters
cusname:
runreportdate:
go clear buttons
click go open report in pdf
SELECT hp.party_name CustomerName,
csi.incident_number SRNumber,
to_char(csi.incident_date,'DD-MON-YYYY') SRDate,
to_char(csi.close_date,'DD-MON-YYYY') SRCloseDate,
mtl.description SRItemName,
csi.summary Summary,
csi.problem_code,
csi.incident_address SRAddress,
csi.INCIDENT_COUNTRY SRCountry,
'31-DEC-2008' Reportrundate,
COUNT ( * ) over () cnt,
cis.name,
COUNT(
CASE
    WHEN cis.name='Low'
    THEN 1
END) over () Low,
COUNT(
CASE
    WHEN cis.name='Medium'
    THEN 1
END) over () Medium,
COUNT(
CASE
    WHEN cis.name='High'
    THEN 1
END) over () High1,
to_char(csi.incident_date,'MON-YYYY') SrMonth
FROM hz_parties hp,
hz_cust_accounts hca,
hz_contact_points hc,
cs_incidents_all_b csi,
ar_lookups arl,
cs_incident_severities_b cis,
mtl_system_items_kfv mtl
WHERE hca.cust_account_id   =csi.account_id
AND hp.party_type          IN ('PERSON','ORGANIZATION')
AND hp.status               ='A'
AND hp.party_id             = hca.party_id
AND hca.status              ='A'
AND hp.party_id             =hc.owner_table_id(+)
AND hc.owner_table_name(+) ='HZ_PARTIES'
AND hp.party_id             =hca.cust_account_id
AND hc.contact_point_type(+)='PHONE'
AND hc.primary_flag(+)      ='Y'
AND hc.status(+)            ='A'
AND arl.lookup_type(+)      = 'PHONE_LINE_TYPE'
AND arl.lookup_code(+)      = hc.phone_line_type
AND hp.party_name='Business World'
AND csi.incident_date BETWEEN to_date('01-JAN-2000','DD-MON-YYYY') AND to_date('31-DEC-2008','DD-MON-YYYY')
AND cis.incident_severity_id=csi.incident_severity_id
AND mtl.inventory_item_id=csi.inventory_item_id
GROUP BY hp.party_name,
csi.incident_number,
csi.incident_date,
csi.close_date,
csi.summary,
csi.problem_code,
csi.incident_address,
cis.name,
csi.INCIDENT_COUNTRY,
mtl.description,
to_char(csi.incident_date,'MON-YYYY')
Am code
    public void initQuery(String paramString1, String paramString2)
          SrReportVOImpl vo=getSrReportVO1();
        if ((paramString1 != null) && (!("".equals(paramString1.trim()))) && (paramString2 != null) && (!("".equals(paramString2.trim()))))
          vo.setWhereClauseParams(null);
          vo.setWhereClauseParam(0, paramString1);
          vo.setWhereClauseParam(1, paramString2);
          vo.executeQuery();
    public XMLNode getPrintDataXML()
    //SrReportVOImpl vo=getSrReportVO1();
    OAViewObject vo = (OAViewObject)findViewObject("SrReportVO1");
    //vo.initQuery(s,s1);
    XMLNode xmlNode=(XMLNode) vo.writeXML(4,XMLInterface.XML_OPT_ALL_ROWS);
        return xmlNode;
CO code
      SrAMImpl am=(SrAMImpl)pageContext.getApplicationModule(webBean);
      if(pageContext.getParameter("Go")!=null)
          //am.searchSrDetails(pageContext,webBean);
           String s=pageContext.getParameter("CustomerName");
           String s1=pageContext.getParameter("RunReportDate");
               am.initQuery(s,s1);
             // Get the HttpServletResponse object from the PageContext. The report output is written to HttpServletResponse.
             DataObject sessionDictionary = (DataObject)pageContext.getNamedDataObject("_SessionParameters");
             HttpServletResponse response = (HttpServletResponse)sessionDictionary.selectValue(null,"HttpServletResponse");
             try {
             ServletOutputStream os = response.getOutputStream();
             // Set the Output Report File Name and Content Type
             String contentDisposition ="attachment;filename=ServiceReport.pdf";
             response.setHeader("Content-Disposition",contentDisposition);
             response.setContentType("application/pdf");
                 Serializable param[]={pageContext.getParameter("CustomerName"),pageContext.getParameter("RunReportDate")};
                 System.out.println("hiiii 12");
                 // Get the Data XML Output as the XMLNode
                 XMLNode xmlNode = (XMLNode) am.invokeMethod("getPrintDataXML",param);
                 System.out.println("hiiii 13");
                 System.out.println(xmlNode.toString());
                 System.out.println("hiiii 14");
             // Get the Data XML File as the XMLNode
             ByteArrayOutputStream outputStream = new ByteArrayOutputStream();
             xmlNode.print(outputStream);
             ByteArrayInputStream inputStream = new ByteArrayInputStream(outputStream.toByteArray());
             ByteArrayOutputStream pdfFile = new ByteArrayOutputStream();
             //Generate the PDF Report.
             TemplateHelper.processTemplate(
             ((OADBTransactionImpl)pageContext.getApplicationModule(webBean).getOADBTransaction()).getAppsContext(),
             APP_NAME,
             TEMPLATE_CODE,
             ((OADBTransactionImpl)pageContext.getApplicationModule(webBean).getOADBTransaction()).getUserLocale().getLanguage(),
             ((OADBTransactionImpl)pageContext.getApplicationModule(webBean).getOADBTransaction()).getUserLocale().getCountry(),
             inputStream,
             TemplateHelper.OUTPUT_TYPE_PDF,
             null,
             pdfFile);
             // Write the PDF Report to the HttpServletResponse object and flush.
             byte[] b = pdfFile.toByteArray();
             response.setContentLength(b.length);
             os.write(b, 0, b.length);
             os.flush();
             os.close();
             pdfFile.flush();
             pdfFile.close();
             catch(Exception e)
             response.setContentType("text/html");
             throw new OAException(e.getMessage(), OAException.ERROR);
             pageContext.setDocumentRendered(false);
               System.out.println("hiiii 13");
      if(pageContext.getParameter("Clear")!=null)
          am.ClearFields(pageContext,webBean);
      }can any one tell me how to set the bind parameters or setting parameter

Hi,
Could not understand your problem exactly. DId you try adding bind variables in the query like below:
AND hp.party_name='Business World'
AND csi.incident_date BETWEEN to_date('01-JAN-2000','DD-MON-YYYY') AND to_date('31-DEC-2008','DD-MON-YYYY')
change to
AND hp.party_name=:1
AND csi.incident_date BETWEEN :2 AND :3
Please note you will need three bind variables. Second and third for SR Dates.
~Amol

How to set gprs settings in i phone 4

Dear Sir
How to set GPRS settings in i phone 4 pls send me the details
Thanks

See pages 11 and 135 of the iPhone User Manual:
iPhone User Guide (For iOS 6.1 Software)

How to set the number of rings before voice mail answers?

How to set the number of rings before voice mail answers?

For me its:
1. Open the phone app and dial *#61# on the Keypad. Press the Call button.
2. Locate this text on the screen: "Setting Interrogation Succeeded, Voice Call Forwarding, When Unanswered, Forwards to +" and record the 11-digit number after the + symbol.
3. Touch the Dismiss button. Now enter this code on the Keypad: *61*+ followed by the 11-digit Forwards to number recorded in step 2, followed by *11 and *ringtime#. Ringtime is the number of seconds you want your iPhone to ring before voicemail picks up. Your finished code should look something like this:
*61*+18555513466*11*30#
In the example above the ring time is set to 30 seconds. Press the Call button.
4. You should receive the message: Setting Activation Succeeded. Press Dismiss and next time you receive a call it will ring for the new amount of time before going to voicemail.

How to set the table input in Query template?

Hi all.
I need to call a Bapi_objcl_change, with import parameter and a table as an input. I have done this, in BLS. I have set the table input in the
form of xml. In BLS, I get the output(the value gets change in SAP R3, what i have given in BLS). But if i set the same xml structure in
query template, I didn't get the output. Table input parameter does not take that xml source. How to set the table input in Query template?
can anyone help me?
Regards,
Hemalatha

Hema,
You probably need to XML encode the data so that it will pass properly and then xmldecode() it to set the BAPI input value.
Sam

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

How to set the background for all components?

hi
Does anybody know how to set the DEFAULT background color in an application.. I need it because in jdk 1.3 the default bgcolor is grey and in 1.5 it is white.. and I wish white as well.. so to make it also white in jdk 1.3 I need to use the (a bit annoying) anyContainer.setBackground( Color.white ); and these are lots in my app.. So my question is: is there such an overall class with a function (say UIManager.setComponentsBackground( Color color ) ) for such a purpose?
any tip or link would be greatly appreciated

Does anybody know how to set the DEFAULT background color in an applicationthis might get you close
import java.awt.*;
import javax.swing.*;
import java.util.Enumeration;
class ApplicationColor extends JFrame
public ApplicationColor()
    setApplicationColor(Color.RED);
    setLocation(400,300);
    setDefaultCloseOperation(EXIT_ON_CLOSE);
    JPanel jp = new JPanel(new BorderLayout());
    jp.add(new JTextField("I'm a textfield"),BorderLayout.NORTH);
    jp.add(new JComboBox(new String[]{"abc","123"}),BorderLayout.CENTER);
    jp.add(new JButton("I'm a button"),BorderLayout.SOUTH);
    getContentPane().add(jp);
    pack();
public void setApplicationColor(Color color)
    Enumeration enum = UIManager.getDefaults().keys();
    while(enum.hasMoreElements())
      Object key = enum.nextElement();
      Object value = UIManager.get(key);
      if (value instanceof Color)
        if(((String)key).indexOf("background") > -1)
          UIManager.put(key, color);
public static void main(String[] args){new ApplicationColor().setVisible(true);}
}

How to set the header variables in weblogic

Hi,
We have a following set up in our environment.
We have weblogic and on the top of it we have apex listener deployed which redirects Oracle Apex.
My Issue:
How can we set up the header variables in weblogic once the user is authenticated against weblogic server.
We are struck here, not knowing how to set the header variables in weblogic server. Its fairly straight forward for Oracle Access Manager or others..
Thanks
Ramesh P.

maybe you are looking for the routing options
http://docs.oracle.com/cd/E13159_01/osb/docs10gr3/userguide/modelingmessageflow.html#wp1125348

How to set the message in the status bar...

hai,
how to set the message in the status bar...
let us say "inserted data successfully, or opening page followed by the link clicked on the screen....."
kindly help me out

sunil,
do not use advise by Ashutosh with WebDynpro.
Instead of placing message into browser status bar (and browser is not the only WD UI agent), use IWDMessageManager API to post messages of such kind:
wdComponentAPI.getMessageManager().reportSucces("Record inserted");
VS

How to set the number of seconds a servlet is allowed to run

I use JSP to generate a report, but it will take about 10 minutes to search.
IE Client screen displays an error message what is "Cannot find out your page" after 8 minutes. How to set the number of seconds a servlet is allowed to run.

It's not a matter of how long the servlet is running... it's the browser timing out because the servlet hasn't responded to its request.
You have several options:
1) "Browser Pinging"
Your servlet sends some small data which can be either seen or unseen (html comments, hidden chars, etc) by the user at short intervals while your report is running. When the report is finished, the browser will not have timed out because it has been "snacking" on those small bits of data which tell the browser its original request was both heard and being handled. I don't think there is any timeout in IE as long as it receives data continually (or at least before its own timeout mark over and over again...)
2) Multithreaded processing
This would probably be a better approach. Have the report run in a separate thread running on the server. You'd want to store a reference to this executing report in the user's session. Instead of making the browser wait for the report to be finished, have the servlet check the user's session to see if a report exists and is running. If one does not exist, create one and start its execution. If one does exist, and is still running, print a "please wait" type of message OR an animation, etc... along with some javascript which will reload the page every few seconds. If the page reloads and the servlet sees that the report is finished, it can then display it to the user.
Hope this helps,
-Scott

Since I upgraded to the new iOS 7 operating system for my iphone, I can no longer adjust the volume on my alarm. No matter what setting the volume of my phone is my alarm is always full blast. Since I hate being startled awake, what can I do?

Since I upgraded to the new iOS 7 operating system for my iphone, I can no longer adjust the volume on my alarm. No matter what setting the volume of my phone is my alarm is always full blast. Since I hate being startled awake, what can I do?

Go to your home screen, and then press the volume down or up button. It should say Ringer instead of volume. If it doesn't do that, try going into the clock app and try it there.

How to set the user who can access to repository

Hi,
I know we can create user and group in the tools->security.And if this users is belong to Administrators Group, it can access to RPD and do some modify..
Can we create group or user who can access RPD in some situation(like mentioned in HELP, A can access to repository on Mondays and Wednesdays, B can access to repository on Saturdays and Sundays) and how to set the privilege..
Thanks
anne

Hi Anne,
The example specified in Help is about restricting query execution on weekdays/weekends for a particular webgroup. Inorder to configure such access ,
Double click on the web group name -> Query Limits tab ->Click on Restrict button provided against the physical connection pool ->Select Allow/Disallow by selecting a particular time period.
Rgds,
Dpka

How to set the root path of XML document when calling Inserting procedure

Hi,
I was create a procedure to insert XML Document in to DBMS Tables, but i am not able to set the Start root element in calling procedure.
My calling procedure is
exec insXmldoc('pmc_sample.xml', 'pmc')
When i am calling this procedure i got this error
11:23:54 Error: ORA-29532: Java call terminated by uncaught Java exception: oracle.xml.sql.OracleXMLSQLException: Start of root element expected.
ORA-06512: at "SYS.DBMS_XMLSAVE", line 65
ORA-06512: at "SCOTT.INSPROC", line 8
ORA-06512: at line 2
I am checking my XML file using XML Validator. My XML file was parsed with out errors.
Please give the solution,and tell me where i did wrong in my calling procedure.
suppose i have this XML file in local E drive ,how to set the path for that XML file in my calling procedure.

Hi, I am doing the code likthis,please give the solution.
SQL> create or replace procedure insProc(xmlDoc IN CLOB, tableName IN VARCHAR2) is
2 insCtx DBMS_XMLSave.ctxType;
3 l_ctx dbms_xmlsave.ctxtype;
4 rows number;
5 begin
6 insCtx := DBMS_XMLSave.newContext(tableName); -- get the context handle
7 rows := DBMS_XMLSave.insertXML(insCtx,xmlDoc); -- this inserts the document
8 DBMS_XMLSave.closeContext(insCtx); -- this closes the handle
9 end;
10 /
Procedure created.
SQL> begin
2 insProc('/usr/tmp/ROWSET.xml', 'emp');
3 end;
4 /
begin
ERROR at line 1:
ORA-29532: Java call terminated by uncaught Java exception: oracle.xml.sql.OracleXMLSQLException:
Start of root element expected.
ORA-06512: at "SYS.DBMS_XMLSAVE", line 65
ORA-06512: at "SCOTT.INSPROC", line 7
ORA-06512: at line 2
Kishore B

How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?

Dear SharePoint Developers,
Please help.
I need to know How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?
I think this is a "sealed column", whatever that is, which is shown in SPD 2013 as a column of content type "document, folder, MyCustomContentType".
I know when I set the column order in my custom Content Type settings page, it is correct.
But, when I load the NewDocSet.aspx page, the column order that I set in the settings page is NOT used for this "sealed column" which is bad.
Can you help?
Please advise.
Thanks.
Mark Kamoski
-- Mark Kamoski

Hi,
According to your post, my understanding is that you want to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx.
Per my knowledge, if you have Content Type management enabled for the list or library (if you see a list of content type with the option to add more), the display order of columns is set for each content type.
Drill down into one of them and you'll see the option under the list of columns for that content type.
To apply the column order in the NewDocSet.aspx page, you need to:
Select Site Settings, under Site Collection Administration, click Content type publishing. In the Refresh All Published
Content Types section, choose Refresh all published content types on next
update.
Run two timer jobs(Content Type Hub, Content Type Subscriber) in central admin(Central Administration--> Monitoring--> Review timer jobs).
More information:
http://sharepoint.stackexchange.com/questions/95028/content-types-not-refreshing-on-sp-online
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to set the magnifier in I phone

Similar Messages

Maybe you are looking for