How to set the name of the spool's record in report

Hello everyone:
I have just met a problem in setting a name of a spool record in report.
Does anyone have an idea?
Thanks for your help...

Similar Messages

How to set the spool retention period till 30 days(Printer Properties).

Hi SAP Experts
I need to setup a job which creates a spool. I want to set the spool retention period till 30 days(Printer Properties). But I have the option of keeping it only for 8 days or Do Not Delete at all. Can you please let me know how can I setup a job which creates a spool which wil be retained for 30 days and then will automatically get deleted?
Advanced Thanks
Thanks & Regards,
Kishore.

Hello Kishore,
I can understand why you dont want to change the variant.
However may be a slight change in the variant might help your cause though I am not sure whether you will like this suggestion or not.
Create a dummy output device type to which all spools created for this report need to be assigned.
Once this is done make a small change in the variant for the field Output device in such a manner that all the spools belonging to this printer/output device are not deleted.
Then create a new variant for this output device ensuring that only spools belonging to this output device and older than 29 or 30 days are deleted.
While this will ensure that normal spool requests are deleted these ones are not.
Really dont if this solution is acceptable or not.
Regards.
Ruchit.

How to set the number of records displayed at run time

Is it possible to set the number of records displayed block property at run time? The built-in 'GET_BLOCK_PROPERTY' can retrieve the number of RECORDS_DISPLAYED. But I can't find SET_BLOCK_PROPERTY to set this property. Is there anyway I can set this property programmatically? Thanks for any suggestions!

Bookmark Go to End
goal: How to vary the number of records displayed in a block
programmatically
fact: Oracle Forms Developer
fix:
Block property 'Number of Records Displayed' can not be changed during runtime
using SET_BLOCK_PROPERTY. However, it is still possible programmatically change
the visual appearance of the form so that it creates effect of changing this
property. To achieve such an effect follow these steps:
1. in Forms Builder, in the multirecord block define the new set of items.
The simplest way is to copy/paste the original item and rename created item.
2. set properties of these new items so that they are the same as the properties
of the original items. If these new items were copied from original items
then properties are already the same. Modify following properties
'Database item' on new items to value 'No'
'Synchronize with item' to the value of the original item
'Number of Items Displayed' to desired value.
'Visible' to 'No'
In other words, these new items are mirrors of original items.
3. code event, which is meant to trigger the change in block appearance.
This code should use SET_ITEM_PROPERTY built-in to set properties
like 'VISIBLE', 'ENABLED', 'NAVIGABLE', 'UPDATE_ALLOWED' and others
to desired value for items which are about to be displayed, then
move cursor to one of these just displayed items with GO_ITEM built-in
and then hide the previously displayed items.
Example:
Assume that the block is built on SCOTT.DEPT schema. Following will
change the set of displayed items
set_item_property('dept.mdeptno',visible,property_true);
set_item_property('dept.mdname',visible,property_true);
set_item_property('dept.mloc',visible,property_true);
set_item_property('dept.mdeptno',enabled,property_true);
set_item_property('dept.mdname',enabled,property_true);
set_item_property('dept.mloc',enabled,property_true);
set_item_property('dept.mdeptno',update_allowed,property_true);
set_item_property('dept.mdname',update_allowed,property_true);
set_item_property('dept.mloc',update_allowed,property_true);
set_item_property('dept.mdeptno',navigable,property_true);
set_item_property('dept.mdname',navigable,property_true);
set_item_property('dept.mloc',navigable,property_true);
go_item('dept.mdeptno');
set_item_property('dept.deptno',visible,property_false);
set_item_property('dept.dname',visible,property_false);
set_item_property('dept.loc',visible,property_false);
Regards,
Monica

How to Keep the spool created of a report for one month

Hi ,
How do we program to keep the spool created of a report for 1 month?
I used SUBMIT TO SAP-SPOOL but it seems that its maximum retention is only 9 days...
Please advice.
Thanks!

This would be a question for your basis administrator.
Rob

How to set the tilte for a multilingual report

Hi all!
I am trying to display some titles for a report
that is multilingual (in each page)
I was thinking a bit and I came with two possible solutions.
for both solutions I create a field in
the main section in the margin section in the margin, called F_TITLE_1
solution 1
pass to the reports all the fields necessary for the title
and make all the queries in the forms.
but this solution I don't like. If I have to modify the title I have to modify the report and the form
solution 2
pass to the report a code_language : P_CODE_LANGUAGE
create a query on the report
the query is the following
select title as title_1 from titles where code_language = :P_CODE_LANGUAGE AND code_title= 12
and then I assigned to the property source (in F_TITLE_1)
title_1 (that comes from the query)
but when I want to se the report I have a an error
REP-1213 Field 'F_TITLE_1' references column 'title_1' at a frequency below its group
so, is there any way to solve this or a solution similar to this? I don't like the solution 1
Alejandro

Check if the column_title is in a group and keep the frame on top of the column
it will take care of your problemn

How to set dynamic name of the mail attachment according to source file ?

Hi,gurus:
Our scenario is like below:
Sending files from an FTP server to another FTP server without using the integraiton repositary,and the file name is not changed .Now, we want to also send the file to some with by mail adapter.The scenario now works by using two business services in receiver determination.But the name of the attachment is "untitled.xml".We know how to set the file name staticly,but how to set the name dynamicly according to the source file name ?
I have checked miachel's blog "XI: Dynamic name in the mail attachment - pseudo "variable substitution"(/people/michal.krawczyk2/blog/2006/02/23/xi-dynamic-name-in-the-mail-attachment--pseudo-variable-substitution),but how can I get the source file name?
And another question:Must we restart the adapter or j2ee engine to make the user defined module work?

Hi,
>>>but how can I get the source file name?
form dynamicconfiguration (ASMA)
>>>And another question:Must we restart the adapter or j2ee engine to make the user defined module work?
no need for a restart
Regards,
Michal Krawczyk

[SOLVED] How to set the packager name for an AUR package?

Hi,
I'm maintaining an AUR package (fspcc), but I don't know how to set the name of the "packager" for that package.
E.g. when you request info about some package
$ pacman -Qi somepkg
there is a line
Packager: Unknown Packager
that specifies the packager.
How do I set this "Packager" info so that any user installing my package will see what I want?
Last edited by lisztinf (2014-04-13 13:39:43)

Thanks for the answer.
I guess that when I run
$ makepkg
in my local build directory, then "mkpkg" will build a package with the "Packager" info set accordingly to my local makepkg.conf.
However, I would like another user - with his own makepkg.conf - to see what I want when installing the package. How can I achieve this?
If I install an official package - say pacman itself - through ABS, I see the "Packager" field properly set for that official package. But certainly this info doesn't come from my local makepkg.conf. I would like the same behaviour for my package. Is it possible?

How to send the spool output to the specific user during ALE distribution

Hi All
In ALE internal order Configuration done by BAPI Method SAVEREPLICA Business object BUS2075whenever user changed the internal order which is moved to the destination system because of change data setting in data element fields.
I want to know how to send the spool output of the changed internal order to the specific user during ALE distribution.
Please help me to reslove the above issue
Thanks & Regards
KRISHGUNA

Solved by myself

How to set the user who can access to repository

Hi,
I know we can create user and group in the tools->security.And if this users is belong to Administrators Group, it can access to RPD and do some modify..
Can we create group or user who can access RPD in some situation(like mentioned in HELP, A can access to repository on Mondays and Wednesdays, B can access to repository on Saturdays and Sundays) and how to set the privilege..
Thanks
anne

Hi Anne,
The example specified in Help is about restricting query execution on weekdays/weekends for a particular webgroup. Inorder to configure such access ,
Double click on the web group name -> Query Limits tab ->Click on Restrict button provided against the physical connection pool ->Select Allow/Disallow by selecting a particular time period.
Rgds,
Dpka

How to set the file path dynamically based on sytem, username, and date

Hi All,
My requirement is upload the data into one structure like xyz that is related to t.code MCSZ.
file will be in UNIx SERVER .
PATH IS: /sapif
file name is xy789 load .txt
I have to write code in one user-exit
how can i set the file path for this.
shall i put hard code file path?
because i have to writecode in user-exit.
plz tell me how to set the file path based ons syetem, username, date
Thanks in advance
Ram.A

Concatenate the field SY-SYSID, SY-UNAME and SY-DATUM for the file path

How to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B

Hi Friends,
How to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B.
External Trading Partner is sending the EDI 856 via AS2 URL to our Oracle B2B Server.
In the inbound 856 agreement, we have checked the option of Funtional Ack and also Functiona Ack handled by B2B is yes.
We have the outbound agreement which is sending that Functional ack 997 (auto generated by oracle b2b) and we have specified the Outbound AS2 channel of the Partner.
997 doc is being sent to external partner using AS2 channel, but the filename is generating as '40101'.
Please can you let me know how to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B.
Appreciate your valuable answers!!
Thanks,
Amirineni

Amirineni,
AFAIK, there is no option to set the file name when the 997 is generated automatically by B2B.
Alternatively, if this is a must requirement, you can generate the FA from backend and send to B2B with MSG_TYPE =9. In this case, you can set the header with filename (How to set the actionname property in B2B 11g)

How to set the parameter

hi i am creating xml publisher and from OAF with parameters
cusname:
runreportdate:
go clear buttons
click go open report in pdf
SELECT hp.party_name CustomerName,
csi.incident_number SRNumber,
to_char(csi.incident_date,'DD-MON-YYYY') SRDate,
to_char(csi.close_date,'DD-MON-YYYY') SRCloseDate,
mtl.description SRItemName,
csi.summary Summary,
csi.problem_code,
csi.incident_address SRAddress,
csi.INCIDENT_COUNTRY SRCountry,
'31-DEC-2008' Reportrundate,
COUNT ( * ) over () cnt,
cis.name,
COUNT(
CASE
    WHEN cis.name='Low'
    THEN 1
END) over () Low,
COUNT(
CASE
    WHEN cis.name='Medium'
    THEN 1
END) over () Medium,
COUNT(
CASE
    WHEN cis.name='High'
    THEN 1
END) over () High1,
to_char(csi.incident_date,'MON-YYYY') SrMonth
FROM hz_parties hp,
hz_cust_accounts hca,
hz_contact_points hc,
cs_incidents_all_b csi,
ar_lookups arl,
cs_incident_severities_b cis,
mtl_system_items_kfv mtl
WHERE hca.cust_account_id   =csi.account_id
AND hp.party_type          IN ('PERSON','ORGANIZATION')
AND hp.status               ='A'
AND hp.party_id             = hca.party_id
AND hca.status              ='A'
AND hp.party_id             =hc.owner_table_id(+)
AND hc.owner_table_name(+) ='HZ_PARTIES'
AND hp.party_id             =hca.cust_account_id
AND hc.contact_point_type(+)='PHONE'
AND hc.primary_flag(+)      ='Y'
AND hc.status(+)            ='A'
AND arl.lookup_type(+)      = 'PHONE_LINE_TYPE'
AND arl.lookup_code(+)      = hc.phone_line_type
AND hp.party_name='Business World'
AND csi.incident_date BETWEEN to_date('01-JAN-2000','DD-MON-YYYY') AND to_date('31-DEC-2008','DD-MON-YYYY')
AND cis.incident_severity_id=csi.incident_severity_id
AND mtl.inventory_item_id=csi.inventory_item_id
GROUP BY hp.party_name,
csi.incident_number,
csi.incident_date,
csi.close_date,
csi.summary,
csi.problem_code,
csi.incident_address,
cis.name,
csi.INCIDENT_COUNTRY,
mtl.description,
to_char(csi.incident_date,'MON-YYYY')
Am code
    public void initQuery(String paramString1, String paramString2)
          SrReportVOImpl vo=getSrReportVO1();
        if ((paramString1 != null) && (!("".equals(paramString1.trim()))) && (paramString2 != null) && (!("".equals(paramString2.trim()))))
          vo.setWhereClauseParams(null);
          vo.setWhereClauseParam(0, paramString1);
          vo.setWhereClauseParam(1, paramString2);
          vo.executeQuery();
    public XMLNode getPrintDataXML()
    //SrReportVOImpl vo=getSrReportVO1();
    OAViewObject vo = (OAViewObject)findViewObject("SrReportVO1");
    //vo.initQuery(s,s1);
    XMLNode xmlNode=(XMLNode) vo.writeXML(4,XMLInterface.XML_OPT_ALL_ROWS);
        return xmlNode;
CO code
      SrAMImpl am=(SrAMImpl)pageContext.getApplicationModule(webBean);
      if(pageContext.getParameter("Go")!=null)
          //am.searchSrDetails(pageContext,webBean);
           String s=pageContext.getParameter("CustomerName");
           String s1=pageContext.getParameter("RunReportDate");
               am.initQuery(s,s1);
             // Get the HttpServletResponse object from the PageContext. The report output is written to HttpServletResponse.
             DataObject sessionDictionary = (DataObject)pageContext.getNamedDataObject("_SessionParameters");
             HttpServletResponse response = (HttpServletResponse)sessionDictionary.selectValue(null,"HttpServletResponse");
             try {
             ServletOutputStream os = response.getOutputStream();
             // Set the Output Report File Name and Content Type
             String contentDisposition ="attachment;filename=ServiceReport.pdf";
             response.setHeader("Content-Disposition",contentDisposition);
             response.setContentType("application/pdf");
                 Serializable param[]={pageContext.getParameter("CustomerName"),pageContext.getParameter("RunReportDate")};
                 System.out.println("hiiii 12");
                 // Get the Data XML Output as the XMLNode
                 XMLNode xmlNode = (XMLNode) am.invokeMethod("getPrintDataXML",param);
                 System.out.println("hiiii 13");
                 System.out.println(xmlNode.toString());
                 System.out.println("hiiii 14");
             // Get the Data XML File as the XMLNode
             ByteArrayOutputStream outputStream = new ByteArrayOutputStream();
             xmlNode.print(outputStream);
             ByteArrayInputStream inputStream = new ByteArrayInputStream(outputStream.toByteArray());
             ByteArrayOutputStream pdfFile = new ByteArrayOutputStream();
             //Generate the PDF Report.
             TemplateHelper.processTemplate(
             ((OADBTransactionImpl)pageContext.getApplicationModule(webBean).getOADBTransaction()).getAppsContext(),
             APP_NAME,
             TEMPLATE_CODE,
             ((OADBTransactionImpl)pageContext.getApplicationModule(webBean).getOADBTransaction()).getUserLocale().getLanguage(),
             ((OADBTransactionImpl)pageContext.getApplicationModule(webBean).getOADBTransaction()).getUserLocale().getCountry(),
             inputStream,
             TemplateHelper.OUTPUT_TYPE_PDF,
             null,
             pdfFile);
             // Write the PDF Report to the HttpServletResponse object and flush.
             byte[] b = pdfFile.toByteArray();
             response.setContentLength(b.length);
             os.write(b, 0, b.length);
             os.flush();
             os.close();
             pdfFile.flush();
             pdfFile.close();
             catch(Exception e)
             response.setContentType("text/html");
             throw new OAException(e.getMessage(), OAException.ERROR);
             pageContext.setDocumentRendered(false);
               System.out.println("hiiii 13");
      if(pageContext.getParameter("Clear")!=null)
          am.ClearFields(pageContext,webBean);
      }can any one tell me how to set the bind parameters or setting parameter

Hi,
Could not understand your problem exactly. DId you try adding bind variables in the query like below:
AND hp.party_name='Business World'
AND csi.incident_date BETWEEN to_date('01-JAN-2000','DD-MON-YYYY') AND to_date('31-DEC-2008','DD-MON-YYYY')
change to
AND hp.party_name=:1
AND csi.incident_date BETWEEN :2 AND :3
Please note you will need three bind variables. Second and third for SR Dates.
~Amol

How to set the value of a variable in a cluster in LabVIEW from C#?

Hi guys, I'm working on a small c# program, which using the interface provided by LabVIEW. And I know that, using lv.SetControlValue(name, value) can set a variable just on the front panel. But in my case, there're several clusters on the front panel. So it confused me how to set the variables in these clusters. For example there's a cluster named clusterA, and a variable in it named valueA, I've tried something like this:
lv.SetControlValue("clusterA.valueA",1);
but it totally not work. Anyone has some experience about this stuff? Thanks a lot!!
Solved!
Go to Solution.

Hey guys, thanks a lot for all your reply. I just find a simply way to solve this porblem. For example, there a cluster named "ClusterA", and there are only two control values in it, which are: an int value named "IntA" (default value IntA = 10)and a string value named "StringA" (default value StringA = "abc"). In C# if you invoke the method:
var clusterA = (Array) vi.GetControlValue("ClusterA");
you will get an Array looks like: clusterA = {10, "abc"}; Then if you want to change IntA to 123, you just need to do:
clusterA.SetValue(123, 0); // 123 is the value, 0 is the index of IntA in the array clusterA, after this clusterA = {123, "abc"}
After this, you just need to give the array back to LabVIEW by using:
vi.SetControlValue("ClusterA", clusterA);
and now see the panel in you LabVIEW, the IntA is changed.

How to set the width of DataGridColumn dynamically?

What I want to do is, load data from a text file and put into a DataGrid component, the fields of ech record in the text have fixed length, and are seperated by a space, like this:
personal.txt
50 Uvwxyz Male    123456789
60 Hijklmn Male    67890123456789
30 Abcdefg Male    123456789012345
40 Opqrst   Female 987654321012345678
the configuration file is column.xml:
<dgcolumn>
     <personal>
          <len>20</len>
          <title>Name</title>
     </personal>
     <personal>
          <len>3</len>
          <title>Age</title>
     </personal>
     <personal>
          <len>6</len>
          <title>Sex</title>
     </personal>
     <personal>
          <len>20</len>
          <title>IdNumber</title>
     </personal>
</dgcolumn>
First I load the column.xml into an arrColumn, then read the personal.txt and seperate the record by the width( "len" in the xml file ), and put the seperated fields into another arrField, set the arrayFld as the dataProvider of a DataGrid, thus, the title can be showed as the headerText of the DataGrid and the data can be loaded correctly.
private function handleComplete( event:Event ):void
     var arrField:Array = new Array();
     var arrFile:Array = loader.data.split(/\n/);
     for( var i:int = 0; i < arrColumn.length; i ++ )
          arrField[i] = convIcom( arrFile[i] );
     adgFile.dataProvider = arrField;
     trace( "The data has successfully loaded" );
private function convIcom( strRecord:String ):Object
     var key:String = null;
     var dataField:String = null;
     var offset:int = 0;
     var obj:Object = new Object();
     if( strRecord.length > 0 )
          for( var i:int = 0; i < arrColumn.length; i ++ )
               dataField = strRecord.substr( offset, arrColumn[i].len );
               key = arrColumn[i].title;
               obj[key] = dataField;
               offset += arrColumn[i].len + 1;
     return obj;
<mx:DataGrid x="10" y="100" width="400" id="dgFile" />
The problem is, the width of the DataGridColumn is average, how to set the column width by the length of each field? I can calculate the rate of each field ( field / fields ), but I don't know how to change the property of the DataGridColumn.width.
Thanks for helping.

In the above post, I pasted an old version of personal.txt, so I paste it again:
personal.txt
Uvwxyz 50 Male   123456789
Hijklmn 60 Male   67890123456789
Opqrst 40 Female 987654321012345678
Abcdefg 30 Male   123456789012345
And I have another question, when the data is loaded into the DataGrid, the fields of each record are ordered in alphabetical order ( the "Age" column will appear firstly, then "IdNumber", "Name", "Sex" ), not as the order in column.xml, how to make it keep the sequence of the xml file?
Thanks again.

How to set the extra component to horizontal scrollbar position

How to set the component to position of horizontal scrollbar , that position contain two component horizontal scrollbar and any component (JButton , JLabel ) like that.. Ms-Word scrollbar ,
Like that bellow fig.


{font:'Times New Roman'}{size:12pt}<img src="file:///C:/DOCUME~1/ADMINI~1/LOCALS~1/Temp/msohtml1/04/clip_image002.jpg" alt="" width="485" height="27" />{size}{font}
How to design ?

pradeep.rajadurai wrote:
I want set the JTable as a background of jframe or jinternalframe , how it is possible One way that may work, you can always extract the image from a rendered JTable and then paint the same image into the JPanel that holds your components via it's paintComponent method, then added the JPanel to the app's contentPane.
give me simple pgmIs English your second language? Because if so, please understand that this demand can be taken by some as rude.

How to set the name of the spool's record in report

Similar Messages

Maybe you are looking for