How to set the number of hidden layers for neural network?

 I am using "Multiclass Neural Network" to build a model. I can configure number of hidden nodes, iterations etc., but I couldn't find anything to configure number of hidden layers. How to configure the number of hidden layers in Azure ML?

Here is the article describing it - https://msdn.microsoft.com/library/azure/e8b401fb-230a-4b21-bd11-d1fda0d57c1f?f=255&MSPPError=-2147217396
Basically, you will have to use a custom definition script in Net# (http://azure.microsoft.com/en-us/documentation/articles/machine-learning-azure-ml-netsharp-reference-guide/)
to create hidden layers and nodes per hidden layer

Similar Messages

  • How to set the number of seconds a servlet is allowed to run

    I use JSP to generate a report, but it will take about 10 minutes to search.
    IE Client screen displays an error message what is "Cannot find out your page" after 8 minutes. How to set the number of seconds a servlet is allowed to run.

    It's not a matter of how long the servlet is running... it's the browser timing out because the servlet hasn't responded to its request.
    You have several options:
    1) "Browser Pinging"
    Your servlet sends some small data which can be either seen or unseen (html comments, hidden chars, etc) by the user at short intervals while your report is running. When the report is finished, the browser will not have timed out because it has been "snacking" on those small bits of data which tell the browser its original request was both heard and being handled. I don't think there is any timeout in IE as long as it receives data continually (or at least before its own timeout mark over and over again...)
    2) Multithreaded processing
    This would probably be a better approach. Have the report run in a separate thread running on the server. You'd want to store a reference to this executing report in the user's session. Instead of making the browser wait for the report to be finished, have the servlet check the user's session to see if a report exists and is running. If one does not exist, create one and start its execution. If one does exist, and is still running, print a "please wait" type of message OR an animation, etc... along with some javascript which will reload the page every few seconds. If the page reloads and the servlet sees that the report is finished, it can then display it to the user.
    Hope this helps,
    -Scott

  • How can I set the number of batch process for DTP globally?

    Hi guys,
    How can I set the number of batch process for DTP in system globally?
    For eg. set the number to 1
    Any hint is appriciated!
    Regards,
    Liying

    Hi,
    In DTP screen also you can view batch settings. Check the Settings menu, you will find Batch.
    Reg
    Pra

  • How to set the number of rings before voice mail answers?

    How to set the number of rings before voice mail answers?

    For me its:
    1. Open the phone app and dial *#61# on the Keypad. Press the Call button.
    2. Locate this text on the screen: "Setting Interrogation Succeeded, Voice Call Forwarding, When Unanswered, Forwards to +" and record the 11-digit number after the + symbol.
    3. Touch the Dismiss button. Now enter this code on the Keypad: *61*+ followed by the 11-digit Forwards to number recorded in step 2, followed by *11 and *ringtime#. Ringtime is the number of seconds you want your iPhone to ring before voicemail picks up. Your finished code should look something like this:
    *61*+18555513466*11*30#
    In the example above the ring time is set to 30 seconds. Press the Call button.
    4. You should receive the message: Setting Activation Succeeded. Press Dismiss and next time you receive a call it will ring for the new amount of time before going to voicemail.

  • How to set the number of rings for the agent phone rings before it get the not prepared state

    hi, how to set the number of rings for the agent phone rings?  before it get the not prepared state.
    thanks

    The following assumes that you are using ICM with an IPIVR etc (not using CVP), as the answer is different for CVP
    What you are looking for is called "Ring no answer time".  It is set in the Agent Desk Setting List tool.
    Regards,
    Kevin

  • How to find the number of idocs generated for a customer on the basis of his purchase order in a day ?

    How to find the number of idocs generated for a customer on the basis of his purchase order in a day ?

    Dear Friends,
    I am absolutely agree with your answer .
    But my question is,
    Lets say.....
    One customer sending X number of purchase orders in a day , so how many IDocs generated on that specific day for that specific customer .
    So, Question is , How can we find the no of sales orders(IDocs) generated for the customers on the specific day ?
    Hope you all understood my requirement .
    Thanks & Regards,
    Aditya

  • How to find the number of references created for a given  object ??

    How to find the number of references created for a given object in a big application environment.
    That means, if i give any object name (of my application) as input, then how can i find the[b] number of references created for that particular object ??

    Please do not post the same question multiple times.
    As for your original question, there is no direct way to do it.
    Especially not the way you phrased it,
    since objects don't have "names".
    Applications also don't have "names".
    They have classes and instances.
    Also, there are 2 related issues, and I'm not sure which one is the one you asked.
    #1. Finding the number of references to the same object.
    Eg.
    Map<String,String> a = new HashMap<String,String>();
    Map<String,String> b = new HashMap<String,String>();
    Map<String,String> c = a;In this case, there are only 2 objects.
    The first object has (at least) 2 references pointing to it.
    The second object has (at least) 1 reference pointing to it.
    (There may be more, if the HashMap library keeps
    references to these things, or if the HashMap object has
    some internal cyclic references...)
    If you're asking this, then it can't be done.
    It's an active research topic in universities
    and software research labs, called "alias analysis".
    Type it in google, and you'll see people are working hard
    and having little success so far.
    #2. Finding the number of instances created from a class.
    In this case, what you have to do is to add a counter to
    the constructor of the class. Every time an object is constructed,
    you increment the counter. Like this:
       class MyClass
           public static int counter = 0;
           public MyClass( )  { counter++; }
        // Then later in your program, you can do this:
        MyClass a = new MyClass();
        MyClass b = new MyClass();
        System.out.println(MyClass.counter); // It should show 2Note: you won't be able to do this to every class in the system.
    For every class you care about, you have to modify its constructor.
    Also: when an object is deleted, you won't always know it
    (and thus you won't always be able to decrement the counter).
    Finalizers cannot always work (read Joshua Bloch's
    "Effective Java" book if you don't believe me), but basically
    (1) finalizers will not always be called, and
    (2) finalizers can sometimes cause objects to not be deleted,
    and thus the JVM will run out of memory and crash

  • MN05: setting the number of printer copies for the whole range of vendors

    Hi all,
    by t.code MN05 I can set the number of copies of the MM documents printed the FIRST TIME. I can do it for doc.type or vendor.
    I can't set the number of printer copies for the whole range of vendors. Should I do it for each one of them?
    Thanks
    Gandalf

    Unfortunately,
    setting for document type, it doesn't work for all range of vendors.
    Setting for document type, in the field "PartF" I've put in "OA". Could it depend on it?
    you do for document type and then it will cover all range of vendors.
    If you want prints for a specific vendor then set condition recrod for that vendor only.
    regards

  • Without to change the setting.how to set the decimal place to 7 for an UDF.

    Without to change the setting, how to set the decimal place to 7 for an UDF?

    Hi
    Once you create a UDF it will automatically be binded to the data source of data type that you gave at the time of creating UDF.
    So i think you can not set the decimal places without changing the setting in display parameters.
    i am not sure whether it will work or not one thing you can try is that create it as a alphanumeric data type and convert your decimal value to sting and then assign it to UDF,While retrieving for any manipulation you convert it as decimal.
    Hope it helps you
    Regards
    Vishnu

  • How to set the gain and input coupling for each channel on a NI 4462 DaQ card?

    I've seen a few examples in how to set the gain for NI 4462, but none tell me how to chose the channel I wish to set this gain.  Also the same problem with input coupling
    Does anyone know how to set the gain and input coupling for each individual channel?
    Thanks,
    Hector
    LabView 8.5 Windows XP

    Hey Hector,
    http://forums.ni.com/ni/board/message?board.id=100&thread.id=1688
    This has a few examples of how to do that.  Let me know if you have further questions.
    Have fun!
    -gaving

  • How to set the Mail and Fax options  for the Smartforms ???

    How to set the Mail and Fax options  for the Smartforms ??? Please reply me very soon. Its a life deciding question now for me. Please .

    >
    veera Karthik wrote:
    > How to set the Mail and Fax options  for the Smartforms ??? Please reply me very soon. Its a life deciding question now for me. Please .
    Hi
    Check this Link:
    http://help.sap.com/saphelp_nw04/helpdata/en/a5/28d3b9d26211d4b646006094192fe3/frameset.htm
    P.S: Never say reply me soon....people answer you here voluntarily and as everyone has their own desk to manage...sp replies may late or early..depending upon the availabality of the members.
    Vishwa.

  • How to find the WebUrl alert was raised for external network

    I have two weburl's requestes to monitor under SCOM2007 R2
    url one:  https://www.asdftest.com
    url two:  https://www.lkjhtest.com
    "url one" is configured to access the weburl from internal network and external network(internet) as well.
    "url two" is not configured to access from external network(internet). only configured for for internal network.
    I have configured for scom monitoring for the above two urls using the SCOM 2007 R2 web application template. After configuration i have not received any alert from the "Url Two"
    Q1). I am expecting an alert for "Url two" because it is not configured for external network access. 
    why i was not received any alert for that.
    Q2). How to find an web Url alert is raised for internal network or external network. SCOM Tool is not asked me to specify that the weburl is is from internal/external network access.
    Q3). Particularly how to find the Url alert was raised for external network
    please suggest me and correct me if i am wrong. 
    Thanks in advance.

    Hi,
    Please refer to your another thread:
    http://social.technet.microsoft.com/Forums/en-US/10d32ff3-d1a5-4875-b1ad-bb01a5799a33/web-url-monitoring-internalexternal-network?forum=operationsmana
    Regards,
    Yan Li
    Regards, Yan Li

  • How to set the number of rows that an awt.Choice can display

    Dear Sir,
    I want to ask how an awt.Choice  can set the number of rows that it can display, like the method setMaximumRowCount in JCombobox. Since I want to set more row can be displayed, but choice no any method can set. And I have tried to add Jcombobox into awt.frame, then, the handling event function cannot receive event for the right-top cornet button(minimize, maximum, close).
    Best Regards,

    please post a Short, Self Contained, Correct Example showing your problem.
    bye
    TPD

  • How to set the number of records displayed at run time

    Is it possible to set the number of records displayed block property at run time? The built-in 'GET_BLOCK_PROPERTY' can retrieve the number of RECORDS_DISPLAYED. But I can't find SET_BLOCK_PROPERTY to set this property. Is there anyway I can set this property programmatically? Thanks for any suggestions!

    Bookmark Go to End
    goal: How to vary the number of records displayed in a block
    programmatically
    fact: Oracle Forms Developer
    fix:
    Block property 'Number of Records Displayed' can not be changed during runtime
    using SET_BLOCK_PROPERTY. However, it is still possible programmatically change
    the visual appearance of the form so that it creates effect of changing this
    property. To achieve such an effect follow these steps:
    1. in Forms Builder, in the multirecord block define the new set of items.
    The simplest way is to copy/paste the original item and rename created item.
    2. set properties of these new items so that they are the same as the properties
    of the original items. If these new items were copied from original items
    then properties are already the same. Modify following properties
    'Database item' on new items to value 'No'
    'Synchronize with item' to the value of the original item
    'Number of Items Displayed' to desired value.
    'Visible' to 'No'
    In other words, these new items are mirrors of original items.
    3. code event, which is meant to trigger the change in block appearance.
    This code should use SET_ITEM_PROPERTY built-in to set properties
    like 'VISIBLE', 'ENABLED', 'NAVIGABLE', 'UPDATE_ALLOWED' and others
    to desired value for items which are about to be displayed, then
    move cursor to one of these just displayed items with GO_ITEM built-in
    and then hide the previously displayed items.
    Example:
    Assume that the block is built on SCOTT.DEPT schema. Following will
    change the set of displayed items
    set_item_property('dept.mdeptno',visible,property_true);
    set_item_property('dept.mdname',visible,property_true);
    set_item_property('dept.mloc',visible,property_true);
    set_item_property('dept.mdeptno',enabled,property_true);
    set_item_property('dept.mdname',enabled,property_true);
    set_item_property('dept.mloc',enabled,property_true);
    set_item_property('dept.mdeptno',update_allowed,property_true);
    set_item_property('dept.mdname',update_allowed,property_true);
    set_item_property('dept.mloc',update_allowed,property_true);
    set_item_property('dept.mdeptno',navigable,property_true);
    set_item_property('dept.mdname',navigable,property_true);
    set_item_property('dept.mloc',navigable,property_true);
    go_item('dept.mdeptno');
    set_item_property('dept.deptno',visible,property_false);
    set_item_property('dept.dname',visible,property_false);
    set_item_property('dept.loc',visible,property_false);
    Regards,
    Monica

  • How to set the number of sockets for batch processing at runtime?

    Hello all,
    I need to change the execution model at runtime. I have achieved this by setting the 'ModelPath' property of the sequence file at runtime. When I set the sequence file model as batchmodel, i need to set the number of test sockets also dynamically. How can this be done? Once i set the number of sockets, i would also have to set the UUT serial number for each socket. Please help me out in solving this.
    Thanks and Regards
    Madhu Srinivasan.

    Hi Madhu,
        You can do this by inserting a sequence file callback into your main sequence and choose the ModelOptions callback. You can then use the expression step to set the "Parameters.ModelOptions.NumTestSockets" value to whatever you want. If you then use the Test UUTs execution entry point you will be prompted for serial numbers automatically. You could also use this same procedure but alter the ModelOptions callback in the process model directly, either way works just as well but I think that using a sequence file callback gives a bit more flexibility in the system.
    Hope this helps,
       Nick

Maybe you are looking for