How to set the number of rings before voice mail answers?

How to set the number of rings before voice mail answers?

For me its:
1. Open the phone app and dial *#61# on the Keypad. Press the Call button.
2. Locate this text on the screen: "Setting Interrogation Succeeded, Voice Call Forwarding, When Unanswered, Forwards to +" and record the 11-digit number after the + symbol.
3. Touch the Dismiss button. Now enter this code on the Keypad: *61*+ followed by the 11-digit Forwards to number recorded in step 2, followed by *11 and *ringtime#. Ringtime is the number of seconds you want your iPhone to ring before voicemail picks up. Your finished code should look something like this:
*61*+18555513466*11*30#
In the example above the ring time is set to 30 seconds. Press the Call button.
4. You should receive the message: Setting Activation Succeeded. Press Dismiss and next time you receive a call it will ring for the new amount of time before going to voicemail.

Similar Messages

  • 8330 Call Forwarding​...How do I set the number of rings before calls are forwarded?

    8330 Call Forwarding...How do I set the number of rings before calls are forwarded? Right now it instantly forwards my calls but I don't want that. I want to change it so that let's say that if after 5 rings I don't answer the call is forwarded. I've looked everywhere for an answer but have had no luck. Any help would be appreciated. I am with Virgin Mobile if this makes a difference.
    Thank you 
    Message Edited by 8WDDdotcom on 08-01-2009 02:39 PM
    Message Edited by 8WDDdotcom on 08-01-2009 02:44 PM

    Well, call forwarding is a feature provided by your carrier -- it is not a function of the device. However it works for your carrier is how it works. Actually, from what I understand about call forwarding, it normally is an all-or-nothing circumstance...calls forward to the number you've asked them to be forwarded to, keeping you in a DND status. Regardless, though, if your carrier tells you how it works on their system, there's nothing that the device can do to override that. Unless there is some kind of 3rd party app that would do it, bypassing (somehow) the carrier network CF feature...but I've never heard of such a thing.
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HT4515 how do I set the number of rings before the caller goes to voice mail ?

    How do i set the number of rings before the coller goes to voice mail on my iphone?
    Thanks you.

    Determined by your carrier, so contact them.

  • How to set the number of rings for the agent phone rings before it get the not prepared state

    hi, how to set the number of rings for the agent phone rings?  before it get the not prepared state.
    thanks

    The following assumes that you are using ICM with an IPIVR etc (not using CVP), as the answer is different for CVP
    What you are looking for is called "Ring no answer time".  It is set in the Agent Desk Setting List tool.
    Regards,
    Kevin

  • How to extend the number of rings before phone goes to answering machine?

    On 5S, How to extend the number of rings before the message machine turns on?

    Check with your carrier. It is not an iPhone controllable setting.

  • How can I set the number of rings before going to voicemail?

    Help please..... my phone rings more than 10+ times before rolling to voicemail. How do I set the number of rings I want? I am missing calls as callers will not wait through through so many rings to get to vm if I am unable to pick up the call. Thank you for any help you can give!

    You can't. Try contacting your phone carrier as they handle voicemails.

  • How do you set the number of rings before going to voice mail?

    I can't find the option to shorten the number of rings before going to voice mail, any ideas?

    It's preset by some phone software but you still may have some sound settings for the answer time. Go to settings and check under call answer settings.

  • 6310i reduce number of rings before voice mail cut...

    Can anyone help as to how I reduce the number of times the phone rings before voice mail cuts in?

    When you set the Call Divert, there should be an option for delay, with preset options up to a maximum of 30 seconds I think.
    Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
    Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

  • How can I set the number of rings before an incoming call goes to voicemail?

    How can I set my iPhone4 to ring more than 3 times before going to voicemail. I keep missing calls because I can't get to the phone that fast. I read on an Apple blog that this is controlled by the service provider, namely Verizon. Looked all over your site of FAQs and couldn't find the answer.

        x-x, I'm sad to hear that you want to leave VZW because of this. The number of rings is standard at 5-6 rings which is approximately 30 seconds. If yours is only ringing 3 times, it may be the ringtone you have selected. Make sure to also reboot your phone often and dial *228 option 2. If still having issues, try calling yourself from another phone to see how many times it rings on that end.
    MarquiaF_VZW
    Follow us on Twitter @VZWSupport

  • How do you control the number of rings before voic...

    When people call me, Skype rings far to many times before voice mail comes on.  How do you reduce the number of rings on an inbound call, so that voice mail comes on in 4 to 5 rings?

    Hi, billwalker1125,
    Skype does not determine when to send calls to voice mail by the number of rings, but instead by the amount of time that has elapsed.  Check your settings (in Windows, it would be Tools -> Options -> Calls -> Voice Messages -> Start recording a voice message if ...   Remember to Save your changes!
    Regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • How to change the number of rings before going to voicemail?

    hi, i have call forwarded my calls from my macpro (skype) to my iphone4s and want to change the number of rings to 15 seconds.  Can someone help please?

    You'd need to contact your carrier. They're the only ones who can change that.

  • How do you change the number of rings before a call goes to voicemail?

    How do you change the number of rings before a call goes to voicemail.

    You can't; it's set by Verizon at 30 seconds.

  • With a Sprint iPhone, how can I shorten the number of rings before going to voicmail?

    Using a Sprint iPhone, how can I shorten the number of rings before going to voicemail?

    23 rings? Really. My friends iPhone rings 4 times then goes to voice mail.
    I know on Verizon, AT&T and T-Mobile the number of rings is set through the carrier. Have you called Sprint?
    Here is the manual, which is also bookmarked in Safari on your iPhone and can be added for free to your iBooks app through the iBookstore: http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • Updating my iPhone 5 software has shortened the number of rings before the answer phone kicks in, how do I extend the time delay?

    Updating my iPhone 5 software has shortened the number of rings before the answer phone kicks in, how do I extend the time delay?

    If the codes Tanzim mentioned don't work, just call your carrier and ask them to extend your time until voicemail picks up, to 30 seconds. They do this routinely.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to set the number of seconds a servlet is allowed to run

    I use JSP to generate a report, but it will take about 10 minutes to search.
    IE Client screen displays an error message what is "Cannot find out your page" after 8 minutes. How to set the number of seconds a servlet is allowed to run.

    It's not a matter of how long the servlet is running... it's the browser timing out because the servlet hasn't responded to its request.
    You have several options:
    1) "Browser Pinging"
    Your servlet sends some small data which can be either seen or unseen (html comments, hidden chars, etc) by the user at short intervals while your report is running. When the report is finished, the browser will not have timed out because it has been "snacking" on those small bits of data which tell the browser its original request was both heard and being handled. I don't think there is any timeout in IE as long as it receives data continually (or at least before its own timeout mark over and over again...)
    2) Multithreaded processing
    This would probably be a better approach. Have the report run in a separate thread running on the server. You'd want to store a reference to this executing report in the user's session. Instead of making the browser wait for the report to be finished, have the servlet check the user's session to see if a report exists and is running. If one does not exist, create one and start its execution. If one does exist, and is still running, print a "please wait" type of message OR an animation, etc... along with some javascript which will reload the page every few seconds. If the page reloads and the servlet sees that the report is finished, it can then display it to the user.
    Hope this helps,
    -Scott

Maybe you are looking for

  • Where to get a icon?

    Hi there, I new at swing and I would like to know if there is any free tool available to draw an icon or a site where I could download one Thanks, Andre

  • My points are not updating

    Hello Experts, my points are not updating. 3 months before the points were auto updating but its not updating now. I dont know what went wrong. Could you pls suggest what shall I do to update the same. Thank you & BR Venkat...

  • LR 4 & PS 5 compatible?

    Is LR 4 compatible with PS 5?  That is if I switch from LR3 to LR 4, will I still be able to export to PS 5, edit the files in PS 5 and come back to LR for printing?

  • Please help is any way you can.

    Hi. I am getting so sick of this program. I have been trying to do it for the past couple of weeks and I am getting nowhere. I really wish someone can help me on it ... like totaly help me on it. I am getting so frustrated. I would appreciate all the

  • Tax condtions are missing in service order

    HI all, when I am creating a service order in PCUI  all the tax conditions for the service material are getting determined in the document.But after changing the userstatus to technically complete and after maintaining the MOP  in the service orderan