How to set the particular city as a region for checking my device in SMP 2.3 HWC

Hi Experts,
I am doing a sample for finding the device with in the region or not like if i set the region as particular city like hyderabad, then it will show the next screen otherwise it has to show the alert message like "You are out of the hyderabad, you cannot access this app.",
Now i am able to get the current location latitude and longitude, now i have to set the region.
how to set the particular city as my region in SMP2.3 HWC.
Vamsi K

Hi Midhun,
Thanks for your reply, i just want to set the Hyderabad coordinates, and i am getting the current device location latitude longitude values. i am comparing those two values, if those were matched then i will go to the next screen i.e., something like hello welcome you are logged in, other wise just show an alert " you are out of the region, so you are not able to use this application".
Thanks,
Vamsi.K

Similar Messages

Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa? TIA

Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa? TIA

Hello,
Exactly which USB device are you referring to? Is the device a NI product?
The Product ID for National Instruments DAQPad-6020E is 0x12C0. The USB vendor ID is 0x3923. This is a 16-bit hexadecimal number(1093) (that is decimal 4243).
Also, here's a document on our website that will help you in configuring NI-VISA to control your USB device:
http://zone.ni.com/devzone/conceptd.nsf/webmain/6792BAB18242082786256DD7006B6416?opendocument
Swapnil P.
National Instruments Engineer

How to set the dimension of main page windows for std dot matrix printer

Hi All,
I have to print a form in a pre- printed form which is coming from the standard dot matrix printer( 80 column).
In the Sap script how i will define the dimensions of main page window .
The printer is in US . How i can sets the page dimensions .
reward point will be provided.
Regards

Change SEQUENCE = "213" to SEQUENCE = "218" in the Task ID Field component. That will solve the issue.
--Shiv

How to set the a quantity during MIGO 101 for Production Order

Hi Gurus
My issue is very easy.
Since few weeks we execute 101-MIGO directly on production dep.t at the end of every shift.
When MIGO is called the system propose the residual qty (noy yet Posted) for the PP Order.
Becuase for a PP Order, many 101 movement have to be posted (during differents shifts), I need to clear the qty proposed in field GOITEM-ERFMG. This is becuase sometime users post a single Movement for the total residual quantity !!!!
Is there an Exit or a Badi or a customizing setting is avaliable to do it ???
Thank-You in advance for your help.
Claudio

Hi Claudio,
A 101 movement for the production order takes place when
- You receive the production order via MB31
or
- Confirm the last operation which has PP03 control key
A backflush is done only for the components called by the production order & not for the header material.
Hope the above answers your query.
Regards,
Rahul.

How to give the Fiscal year period in RSA3 for checking the data.

Hi BW Experts, good morning.
We have loaded the data monthlywise with selection parameters as Fiscal Year Period(FISCPER).
While checking the data consistency in both R/3 and BI, the selection parameter which i have given is in the format of         001.2005
I got the records in BI side.
But if we give the same format In RSA3 in the Fiscal Year Period tab , we r getting 0 records.
So kindly help me how to enter the selection parameters for 1 month.
    Thanks
              Anjali

Hi sanyam ,
   Thanks for the help.
I got it now.
Thank you so much
Bye
               Regards
                     Anjali

Hi i want to know how to set the delivery date as a standard for PO

hi in terms of delivery date how is it possible to set a later date so that I dont need to change it every time I save a purchase order.

Hi,
Your query is not clear. The delivery date is calculated by the system based on the planned delivery period you have entered in material master. Based on this planned delivery time & the PO creation date, system automatically proposes the delivery date, which you need not change.
Pl revert if this does not clear the query.
Regards,
Prashant

How to set the home page in FF14.0 for Android?

Just installed FF14.0 for Android. Previous versions allowed users to set their own home page - how is this done in this version?

Shame Firefox does not have ability to support this.
Have recently downloaded Firefox Beta for Android & had been using Aurora. For both - get this Tab home page - not user choice. Was hoping the ability to select own Home Page would be added to a future update.
Didn't like this feature in Chrome - so deliberately don't use Chrome in any OS. Lots of people complained about this in Chrome. Not sure why Firefox would want to restrict what users can do??
(A key feature of Firefox & Netscape before it is that users are able to control & optimise for their own experience - which is the main reason it has been so well supported over many years.)

How To Set the Resultstate of Business Logic CO for Loop Decision Action

Hi,
I'm using a pre-conditional loop block in my GP process and using a Business Logic CO for the loop decision action. My expectation is the business logic CO should be executed at background and based on its resultstate the loop flow will happen. I've 2 resultstates in the loop decision (bus logic CO) - Continue and Break. I'm setting these two resultstates in the following way :
Continue : BOOL(@currentLevel < @totalLevel)
Break : !BOOL(@currentLevel < @totalLevel)
currentLevel and totalLevel are the two input parameters (unsigned int type) of the business logic CO. If I test the CO it works fine and displays the correct resultstate. But at runtime the process gets paused at the loop decision action CO. I see the loop decision action link in my GP workcenter and UWL and on clicking of it nothing happens. If I refresh the screen still it's there as before.
Anybody who can throw any light on this issue will be highly appreciated. And reward points guranteed for any help to solve the issue
Thanks in advance,
Dipankar

Hi,
Well I solved this issue myself ! After lot of research I found out that the resultstates should be in all small case <b>continue</b> and <b>break</b> and NOT Continue or Break.
But now I've a different issue:
I've an initial action under a sequential block. Then the pre-conditional loop block with a loop decision action and a loop body block(seq block).
The expectation is initially the decision action should get the output param passed by the initial action and then in the iterations it will get the values passed by the output params of the loop body action. To achieve that I have mapped the output param of the initial action to the input param of the decision action and the input and output param of the loop body action. But it seems that the loop decision action though mapped to both the output of the initial action and the loop body action takes the value only from the initial action over the iterations and the values from the loop body action are not getting passed to the loop decision action. The context parameter value of the loop decision action remains static and it becomes an infinite loop.
Any help to resolve this issue will be highly appreciated.
Thanks,
Dipankar

How to set the value of a variable in a cluster in LabVIEW from C#?

Hi guys, I'm working on a small c# program, which using the interface provided by LabVIEW. And I know that, using lv.SetControlValue(name, value) can set a variable just on the front panel. But in my case, there're several clusters on the front panel. So it confused me how to set the variables in these clusters. For example there's a cluster named clusterA, and a variable in it named valueA, I've tried something like this:
lv.SetControlValue("clusterA.valueA",1);
but it totally not work. Anyone has some experience about this stuff? Thanks a lot!!
Solved!
Go to Solution.

Hey guys, thanks a lot for all your reply. I just find a simply way to solve this porblem. For example, there a cluster named "ClusterA", and there are only two control values in it, which are: an int value named "IntA" (default value IntA = 10)and a string value named "StringA" (default value StringA = "abc"). In C# if you invoke the method:
var clusterA = (Array) vi.GetControlValue("ClusterA");
you will get an Array looks like: clusterA = {10, "abc"}; Then if you want to change IntA to 123, you just need to do:
clusterA.SetValue(123, 0); // 123 is the value, 0 is the index of IntA in the array clusterA, after this clusterA = {123, "abc"}
After this, you just need to give the array back to LabVIEW by using:
vi.SetControlValue("ClusterA", clusterA);
and now see the panel in you LabVIEW, the IntA is changed.

How to set the sampling interval using DAQ device?

Now I have a capacity sensor and a 24 bit DAQ device (http://www.mccdaq.com/usb-data-acquisition/USB-2404-10.aspx).
The DAQ device has the maximum sampling rate of 50kS/s . My question is how to set the interval of data collection. For example, if I set the sampling rate to 2000, in continuous sampling mode, I use DAQmx read.vi in a while loop and set the 'number of samples per channel' to 100. I want to plot these data as a function of time by using a XY graph and also save these data. So I add a 'Mean' function to get the average of the 100 samples per each loop (than means, there are 20 data output per second). But when I set the 'number of samples per channel' much smaller (to get more data per second), there are some problems. It seems that the program cannot read so many data and get the average at a higher frequency. I don't know where the problem is. All in all, how to collect data more frequently?Maybe I didn't express my question clearly. I'll upload a simple program later if necessary. Thanks.
Solved!
Go to Solution.

Another question is in continuous mode, NI DAQmx uses Samples per channel to determine the buffer size. But according to the website you specified, it says if the acquisition is continuous (sample mode on the DAQmx Timing.vi is set to Continuous Samples), NI-DAQmx will allocate a buffer according to the following table. And for sample rate between 100 - 10,000 S/s, the buffer size is 10 kS. So if I set the sample rate to be 5000 S/s, and set the Samples per channel to be 20000, then what exactly the buffer size is? 20 kS or 10 kS?
Thanks.

Does anyone know how to get the vendor ID and product ID for NI-Visa? TIA

Does anyone know how to get the vendor ID and product ID for NI-Visa? TIA

This question has already been addressed in this thread:
Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa?
John M
National Instruments

How to set the iterator on a particular row by a value?

Hi all,
What I'm trying to do is:
Duplicate a row by a database function and setting the iterator on the duplicated row.
The first part works fine, but I've got no idea on how to set the iterator on the new row.
The function returns the primary key for the new row.
Has anybody got an idea how to find out where the new row is inserted into the iterator?
Thanks alot in advance
Sebastian Lorenz

Take a look at the documentation. You should be able to build a complex key as an array of the key values.
Key public Key(java.lang.Object[] keyValues)Constructs a Key from a set of key values.
A key may be constructed to identify a row or a set of rows. If it is to identify a unique row, the key values must match the row's key attributes exactly.
A partial key (where some key values are null) may be used to locate a set of partially matching rows. This is applicable only for oracle.jbo.RowIterator's findByKey(Key) method. See oracle.jbo.RowIterator.findByKey(Key) for details.
The key values should be ordered as in the defintion for the given row (that of the Entity or the View Object).
Parameters:keyValues - an array of key values.
Hope this helps

#*$!%! Can't figure out how REALLY to set the printing defaults so they STICK for everything

PLEASE DON'T REPLY HERE. PLEASE REPLY TO MY IDENTICAL POST AT
http://h30434.www3.hp.com/psg/board/message?board.id=Software&thread.id=5348
On our 6-month old HP OfficeJet Pro 8500 Wireless A909g, we can't seem to figure out how to set the DEFAULT printing parameters so they really apply to all docs (unless we designate otherwise for a particular doc, of course). When we set them, sometimes they work for the next doc, and sometimes they revert back to an earlier setting.
There seem to be three ways to set parameters for the printer: Properties, Printing Preferences or Printing Defaults on the Advanced tab. (We really thought Printing Defaults on the Advanced tab would do it, since it's so hard to find, but ... NOT.)
My partner thinks it's an HP conspiracy to sell more ink because the reversion is to General with Color (the most ink-intensive, as far as I can figure out). We are trying to fix the machine to start always with Fast-Economical/Black Ink Only. Sometimes it's there and sometimes we have to re-jigger first. We still have to check every time.
Also, I want to fix every job to "Print Back to Front" because the printer shoots out the pages face up. Again, sometimes it's there, and sometimes we have to re-set before the job.
Also, whether we get the default we had set or we re-jigger first, the settings don't stick for every worksheet in an Excel workbook. Or sometimes not even every page.
So, who out there has the 100% foolproof guide to NAILING DOWN THOSE SETTINGS FOR EVERYTHING?
PLEASE DON'T REPLY HERE. PLEASE REPLY TO MY IDENTICAL POST AT
http://h30434.www3.hp.com/psg/board/message?board.id=Software&thread.id=5348

Locking this accidental double post and directing people to the linked original thread.
Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
Rules of Participation

How to set the user who can access to repository

Hi,
I know we can create user and group in the tools->security.And if this users is belong to Administrators Group, it can access to RPD and do some modify..
Can we create group or user who can access RPD in some situation(like mentioned in HELP, A can access to repository on Mondays and Wednesdays, B can access to repository on Saturdays and Sundays) and how to set the privilege..
Thanks
anne

Hi Anne,
The example specified in Help is about restricting query execution on weekdays/weekends for a particular webgroup. Inorder to configure such access ,
Double click on the web group name -> Query Limits tab ->Click on Restrict button provided against the physical connection pool ->Select Allow/Disallow by selecting a particular time period.
Rgds,
Dpka

How to set the timezone in a DATE datetype?

How to set the timezone in a DATE datetype?
Thanks
Maximus

10.5 Date, Time, and Timestamp
The JDBC API follows the Java platform's approach of representing dates and times as a millisecond value relative to January 1, 1970 00:00:00 GMT. Since most databases don't support the notion of a time zone, the JDBC 2.0 API adds new methods to allow a JDBC driver to get/set Date, Time, and Timestamp values for a particular time zone using a Calendar. For example,
ResultSet rs;
Date date1 = rs.getDate(1);
returns a Date object that wraps a millisecond value which denotes a particular date, like January 3, 1999, and a normalized time 00:00:00 in the default time zone. The time component of the Date is set to zero in the default time zone since SQL DATE values don't have a time component. Since a Calendar was not supplied explicitly to getDate() , the default time zone (really the default Calendar) is used by the JDBC driver internally to create the appropriate millisecond value assuming that the underlying database doesn't store time zone information.
The following example retrieves a date value in GMT-Greenwich Mean Time.
ResultSet rs;
TimeZone.setDefault(TimeZone.getTimeZone("GMT"));
Calendar cal = Calendar.getInstance();
Date date2 = rs.getDate(1, cal);
In the example above, a Calendar is passed explicitly to getDate() to inform the JDBC driver how to calculate the appropriate millisecond value. Note that the same result could have been achieved by simply changing the default time zone, and not passing the Calendar explicitly since the JDBC driver will use the default time zone by default.
Note that the two Date objects created above will not compare as equal assuming that the default time zone is not GMT, even if they represent the `same' date.
if (date1.equals(date2))
//never get here
This is because each Java language Date object really just wraps a normalized millisecond time value and these millisecond values will differ across time zones. If an application wishes to compare dates in different time zones it should first convert them to a Calendar.
An application should create a Date object using a Calendar. The application is responsible for specifying the time as 00:00:00 on the desired date when using the Calendar since JDBC uses this convention. In addition when creating a Time value the application must specify a date of January 1, 1970 to the Calendar used to create the millisecond value for the Time as this is the convention specified by JDBC for time.
Above from:
http://java.sun.com/products//jdk/1.2/docs/guide/jdbc/spec2/jdbc2.0.frame10.html
I hope it can help you!

How to set the particular city as a region for checking my device in SMP 2.3 HWC

Similar Messages

Maybe you are looking for