How to set the PSSigGetSigValueParams.sigMode and subfilter for a PubSec plugin

Hi,
My PubSec plugin, based on DocSign sample, has its PSSigGetSigValueParams.sigMode value to kPSSigMethodPKCS1 by default. I am creating PKCS7 signatures, but due to this default value i cannot.
My questions:
1 - My understanding is that to create PKCS7 signatures my subfilter should be adbe.PKCS7.detached or sha1. And i assume that PSSigGetSigValueParams.sigMode value in sigGetSigValue() is also related, but its constant and cannot be set. how can i set the subfilter and sigMode values so that my plugin starts creating pkcs7 signatures?
2 - I cannot find a documentation which would describe the detailed process of creating and validating signatures using PubSec, in the same way it is described for DigSig. Can you point out such a document so i dont have to ask these basic questions?
3 - Is there any sample available which creates PKCS7 signatures?
thanks in advance.

OK... i am answering myself again.
1 - Ans: How can i set the subfilter value for a PKCS7 signature in my plugin
2 - Ans: I still cannot find any detailed documentation. I just debugged the plugin and found out answers for myself.
3 - Ans: And i still dont know if there is any PKCS7 signature creating sample. but if u use the DocSign sample and follow the steps described in 1-Ans above, then you can easily create PKCS7 signatures.
So, i am considering my question answered. hope it helps others aswell.

Similar Messages

How to set the BARCODE width and length for label printing..

Hi All,
How to set the Code 39 barcode label format in the sizxe of 0.20" * 1.4". By default while printing barcode size exceeds my current requirement. Please let me know to customize the size of barcode labels.
Thanks.

I don't know what you mean by "Code 39" because my Output Designer software doesn't offer that barcode (or do you mean "code 3 of 9?). In any case, are you trying to control the size of the text (which is what I think of when you refer to "label")? If you are, then just change the font & size. If you are wanting to modify the physical characteristics of the barcode itself (height & length for a certain number of characters) then you are probably out of luck. Or at least in for some trial & error.
There are a series of "barcode.xxx" files in the 'config' folder where Output Designer was installed to. These are text files that contain the physical characteristics of the various barcodes for various printers. The parameters that you would be interested in is the height and width of the bars (black & white). For example, a barcode might be defined as .400 high with narrow bars 3 "dots" wide, wide bars 9 "dots" wide and white space the same or different. Presumably changing these values would affect the generated barcode. For example, in this example the wide bars are 3 times the width of the narrow bars so I would assume that relationship would have to remain. To make the resulting barcode shorter you would then use 2 for the narrow and 6 for the wide.
You would have to make the change in the file(s) that would be used for your printer(s).
There are four width values for each of the parameters. Most of the barcodes only use 2 but some have 4. I'm assuming that when there are 4, like in "4 8 12 16", that the barcode definition has 4 different widths of bars and/or spaces.
There is no guarantee that the scanning hardware & software will "see" and interpret the resulting barcode correctly.

How to set a minimum width and height for a stage or scene?

Hello,
Does anyone how to set a minimum width and height for a stage or scene?
I tried listening for width/height property value changes and then adjust the width/height if necessary, but that causes unpleasant flickering of the window.
In JavaFX 2.1 beta SDK for Mac OS, the Stage class has setMinWidth() and setMinHeight() functions which work very well.
I'm wondering what's the equivalent way to do that when using the FX SDK for Windows.
Any help is appreciated!
Thanks.

I was wondering how to enforce a minimum stage size with JavaFX 2.0.3.The same flickering way you are currently doing it. See: http://javafx-jira.kenai.com/browse/RT-15200 "Need a way to set the minimum size of a window"

Without to change the setting.how to set the decimal place to 7 for an UDF.

Without to change the setting, how to set the decimal place to 7 for an UDF?

Hi
Once you create a UDF it will automatically be binded to the data source of data type that you gave at the time of creating UDF.
So i think you can not set the decimal places without changing the setting in display parameters.
i am not sure whether it will work or not one thing you can try is that create it as a alphanumeric data type and convert your decimal value to sting and then assign it to UDF,While retrieving for any manipulation you convert it as decimal.
Hope it helps you
Regards
Vishnu

How to get the Equipements number and desciption for the contract item ?

Hi Gurus,
        How to get the Equipements number and desciption for the contract item items? It would gr8 helpful to me...
VBAP,,EQUI,,,,,,?
Thanks
Krisna

Check with below tables :
EQUI    Equipment master data
EQKT   Equipment short text
EQUZ   Equipment time segment
Thanks
Seshu

How to set the JNDI resources and params

I am trying to connect my Crystal reports to my JSP page.
I am using MySql DB and TomCat 4.1
My web.xml is in the right place and contains the JNDI name (jdbc/MyDB)
I was able to accomplish the following:
1) Setting the connection pool and
2) Able to specify the JDBC database option and was also able to generate the report in the designer using this JDBC option connectivity.
However, when I try to run the report from the JSP page, it gives me the following error:
javax.servlet.jsp.JspException: Report location is not specified in the configuration file at
com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown Source)
at org.apache.jsp.testing_jsp._jspx_meth_crviewer_viewer_0(testing_jsp.java:159)My CrystalReportEngine-config.xml resides in
C:\Program Files\Apache Group\Tomcat 4.1\webapps\WebModule1\WEB-INF\classes
and it contains the following
<CrystalReportEngine-configuration>
<reportlocation>../..</reportlocation>
<timeout>10</timeout>
<keycode>Azzzzzzzzzzzzzzzzzzzzzz</keycode> </CrystalReportEngine-configuration>
My report that I am trying to execute resides in the root of my application (where it supposed to be).
This lead me to believe that I probably need to specify a JNDI datasource.!! Do you agree? If so, how can I specify the
JNDI Provider URL
JNDI Username (is this the tomcat admin user name)?
JNDI PWD
Initial CONTEXTReally appreciate any help you can offer

Can anyone tell me where to post the previouse message to get a solution, or may be a hint?
If i am doing anything wrong to not get a response, please let me know so i can reward it or correct it.
thanks

2 Question How to set the page size and full screen

I am looking to find out how to set the page to be 1024 by
768 static and also how to force a browser window to go to full
screen. Thanks

Hi Ludek,
i could solve the issue by using the follwing code.
report = new ReportDocument();
PageMargins customPageMargin = report.PrintOptions.PageMargins;
report.PrintOptions.PaperOrientation = PaperOrientation.Portrait;
report.PrintOptions.PaperSize = PaperSize.Paper10x14;
customPageMargin.rightMargin = 1;
customPageMargin.topMargin = 0;
customPageMargin.bottomMargin = 0;
report.PrintOptions.ApplyPageMargins(customPageMargin);
Thanks for you help.
Regards,
smitha.

How to set the Selected row and Column in JTable

Hi,
i have a problem like the JTable having one Method getSelectedRow() and getSelectedColumn to know the Selected row and Column but if i want to explicitly set the Selected Row and Column,then there is no such type of Methods.If anybody has any solution then i will be thankful to him/her.
Praveen K Saxena

Is that what you're looking for? :myTable.getSelectionModel().setSelectionInterval(row, row);
myTable.getColumnModel().getSelectionModel().setSelectionInterval(column, column);

How to set the page size and the margins programatically

Hello,
I am working with crystal report XI Release2 and asp.net.
One of my report is having 4 graphs in a single report.In order to display all the graphs in one page i have set the paper size as A3.(Via Crysta report ->File->Page set up)
But the page size A3 is not provided by all printers.So problem comes when the application is diployed on a machine which does not support A3 Printer.All the graphs will not be shown on a single page.
Also Each and Every time ,when the application is diployed on a machine,user has to open the crystal report and adjust the page size accordingly to get all the reports on a single page.
This is a kind of usability issue also.
Is it possible to set the page size and the margins programatically say for eg 11 X 17.so that with out doing anything all the 4 graphs will get displayed on a single page ?
Please let me know if you require more information regarding this issue.
Thanks in advance.
smitha.

Hi Ludek,
i could solve the issue by using the follwing code.
report = new ReportDocument();
PageMargins customPageMargin = report.PrintOptions.PageMargins;
report.PrintOptions.PaperOrientation = PaperOrientation.Portrait;
report.PrintOptions.PaperSize = PaperSize.Paper10x14;
customPageMargin.rightMargin = 1;
customPageMargin.topMargin = 0;
customPageMargin.bottomMargin = 0;
report.PrintOptions.ApplyPageMargins(customPageMargin);
Thanks for you help.
Regards,
smitha.

How to set the X-position and Y-position

I started an application but was struck due to a problem.
The problem was : I was unable to set the X-position and Y-position in the desired place... Any one who can help please help me to continue my application......
I wanted to set my choice group elements in the center of the screen.. help me plz....

You want to change to x/y position of what? The main frame?
If it is the Frame class take a look into the CDC/PP specification:
"An implementation may prohibit resizing of Frames by a user. In such a case, attempts to make any Frame resizable will fail silently"

How to set the File Path to run a javascript using Plugin Code?

Hi All,
Im new to Indesign Plugin Development.Can any one help me out with my problem.
What i want to do is to run a javascript using Plugin Code.When i went through this forum i was able to find out that i should use the IscriptRunner Class to automate this.I could also figure out that the Member Function to use is "CanHandleFile" &"RunFile".
The first parameter in CanHandleFile & RunFile Member Function is to specify the path of the JavaScript File i suppose!I could also find out that IDFile has to used to set the file path Information.
But im clueless how to set the Javascript FilePath using IDFile.Can any one help me how to do this?Any Code Snippets Please?
Waiting for reply.
Thanks
myRiaz

Hi, Andreas Can you explain this in detail? I found it in your post before. The content of elements are returned through the Characters callback function: From ISaxContentHandler.h: /** Receives character data The parser will call this method to report each chunk of character data. SAX parsers may return all contiguous character data in a single chunk, or they may split it into several chunks. But all characters in any single event must come from the same external entity so the Locator provides useful information. Note some parsers will report whitespace using the IgnorableWhitespace() method rather than this one (validating parsers must do so). @param Chars The characters from the XML document. */ virtual void Characters(const PMString& chars) = 0; What i have done is implement my own SAXContentHandlerServiceBoss, and in my file XXXSAXContentHandler.cpp, I override the fonctions StartElement, EndElement, and Characters() like below: I add the PMString xmlData to collect the file content: class XXXSAXContentHandler : public CSAXContentHandler { void XXXSAXContentHandler::Characters(const WideString& chars) { xmlData.Append(chars); } void XXXSAXContentHandler::StartElement(const WideString& uri, const WideString& localname, const WideString& qname, ISAXAttributes* attrs) { xmlData.Append("<"); xmlData.Append(localname); xmlData.Append(">"); } void XXXSAXContentHandler::EndElement(const WideString& uri, const WideString& localname, const WideString& qname) { xmlData.Append("</"); xmlData.Append(localname); xmlData.Append(">"); } } and in my program, I use the code below to call the fonction I overrided, but I dont know how I can get the String xmlData I defined in the XXXSAXContentHandler.cpp InterfacePtr<IK2ServiceRegistry> serviceRegistry(gSession, UseDefaultIID()); InterfacePtr<IK2ServiceProvider> xmlProvider(serviceRegistry->QueryServiceProviderByClassID(kXMLParserService, kXMLParserServiceBoss)); InterfacePtr<ISAXServices> saxServices(xmlProvider, UseDefaultIID()); InterfacePtr<ISAXContentHandler> saxHandler(::CreateObject2<ISAXContentHandler>(kXXXSAXContentHandlerServiceBoss)); saxHandler->Register(saxServices); bool16 parseFailed = saxServices->ParseStream(readStream, saxHandler); Can you give me any help? Thanks and regards!

How to Set the APPR status in Background for service orders

Hi Friends,
could anybody please ,let me know how to set the APPR satus for the seleted service orders( IW32) in background?
Regards,
Xavier.P.

Hi,
Thanks for the reply and you are correct, I am using BADI and I am calling this BAPI inside the method.
Now I am trying to execute this BAPI from SE38 and I am getting the error message, "Error in processing ,Function was not executed". I am able to see this message in the return parameter of the BAPI (Error type - 'E'). And it is giving dump after the call to BAPI_TRANSACTION_COMMIT.
I am using conversion routine 'CONVERSION_EXIT_ABPSN_INPUT' before passing the WBS element to the BAPI.
Please help in this regard.
Regards,
V Kumar
Edited by: V Kumar on Jun 26, 2009 1:42 PM

How to set the default Maximun idle time for servlets

Hello I'm trying to set the default maximun idle time for servlets in Contenedor Release 1.0.2.2.1, but I dont know where to do it. Please somebody help me!!

Saul,
Are you trying to setup the session timeout ? If so please look at the Web FAQ at http://otn.oracle.com/tech/java/oc4j/htdocs/OC4J-WEB-FAQ.html#7
regards
Debu Panda
Oracle

How to set the keepalive timeout and nativepoll in application server 8.2

Hi,
I would like to know how to set "keepalive timeout" and "nativepoll" on application server 8.2.
Thanks,

These parameters were set in Application server 7 as per the following documentation:
http://docs.sun.com/source/817-2180-10/pt_chap4.html
However I am not able to find any documentation with regards to application server 8.2
Please advice..
Thanks

How to set the system date and time in LabVIEW 6i?

Hi,
How can I set the time of the computer from Labview 6i? Is there any function to do this?
Thanks.

Arnau wrote in message news:<[email protected]>...
> Hi,
>
> How can I set the time of the computer from Labview 6i? Is there any
> function to do this?
>
> Thanks.
Not natively that I know of. You could use a LabVIEW DLL call to link
to a Win32 API call which sets the date and time. You would need to
have privileges to do it.
Doug D.
[email protected]

How to set the PSSigGetSigValueParams.sigMode and subfilter for a PubSec plugin

Similar Messages

Maybe you are looking for