How to set the Purchase Order screen to display Add and Cancle button
Hi Experts,
Do anybody knows that how can we see the Add / Cancle button on Purchase Order screen ? , at present I need to compulsory scroll vertically to look at Add / Button button.
In Stock Transfer / Inventory transfer screen when we maximise it than also we can see the add / cancle button
will change of font will effect it ?
BR
Samir Gandhi
Hi,
Can you maximize the PO screen too? You should try a smaller font to seem more within a window form.
Thanks,
Gordon
Similar Messages
-
How to get the Purchase order Qty in the object dependency
Hi,
We are using variant pricing in the purchase order. I have condition type say u201CZVBPu201D for Pallet cost. I defined Pallet cost as 5 USD per each (pallet). I have to calculate Number of pallets = Purchase order Qty/ 5. The number of pallets should be rounded to nearest integer.
My question is how to get the Purchase order Qty in the object dependency?
Is there any reference table and field can be used to get Purchase order Qty just like we use MMCOM-VKOND for variant pricing.
Appreciate your help
Thanks,
SriniHi,
1. I do not have system now so I can not conclusively tell about table field .
2. Since I did it long back so I also do not exactly remember it, there are more than one place where PO qty appears for example Item overview and Item details - one of the PO qty when used in the characteristic do pull the PO qty which can be used for variant pricing (so request to please update the forum with the correct table and field once you find it - in the meantime if I get opportunity to get to system I will also try and find out ). -
Dear SharePoint Developers,
Please help.
I need to know How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?
I think this is a "sealed column", whatever that is, which is shown in SPD 2013 as a column of content type "document, folder, MyCustomContentType".
I know when I set the column order in my custom Content Type settings page, it is correct.
But, when I load the NewDocSet.aspx page, the column order that I set in the settings page is NOT used for this "sealed column" which is bad.
Can you help?
Please advise.
Thanks.
Mark Kamoski
-- Mark KamoskiHi,
According to your post, my understanding is that you want to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx.
Per my knowledge, if you have Content Type management enabled for the list or library (if you see a list of content type with the option to add more), the display order of columns is set for each content type.
Drill down into one of them and you'll see the option under the list of columns for that content type.
To apply the column order in the NewDocSet.aspx page, you need to:
Select Site Settings, under Site Collection Administration, click Content type publishing. In the Refresh All Published
Content Types section, choose Refresh all published content types on next
update.
Run two timer jobs(Content Type Hub, Content Type Subscriber) in central admin(Central Administration--> Monitoring--> Review timer jobs).
More information:
http://sharepoint.stackexchange.com/questions/95028/content-types-not-refreshing-on-sp-online
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
How to view the purchase order output
Hi all,
how to view the purchase order output in the transaction me23n?
How to obtain the purchase order output form?
Please help..HI,
goto NACE tcode then select the purchase order type and go to output types u cna use standard one NEU and provide the sapcript name and form name default will be there with MEDRUCK and print program.
then in ME23n click on messages there create ur message type NEU and save it
then print the purchase order...
hope u get solved with this
Regards
Syed A -
PO not visible in the Purchase Orders screen
Hi All,
There is a Purchase Order which we are not able to view in the 'Purchase Orders' screen. The PO status is 'IN PROCESS'. The PO is visible in the Purchase Orders Summary screen. Need to do some changes to the PO. Can you please let me know the exact cause for the issue.
Regards,
Radhika.There are times that documents may go into In Process - due to workflow setbacks.
Please use the script POXRESPO.sql for these situations.
The script resides in $PO_TOP/sql.
You can also obtain it from the following patch -
Patch 9072294 - Oracle Purchasing Reset PO script was giving a 'ORA-01476: DIVISOR IS EQUAL TO ZERO' Error.
The script will handle most scenarios and can also take action to save the action history or remove it - but more importantly considers budgetary implications
if Encumbrance is turned on in the system.
The script given previous is not recommended.
Regards,
Mike -
How To Prevent the Purchase Order from Holding!
Hi Experts,
We use the method CHECK in BADI ME_PROCESS_PO_CUST to check custom data in purchase order, if error occurs then some error messages will be issued. We use below statements to issue error messages and also set the PO invalidate:
INCLUDE mm_messages_mac.
mmpur_message_forced 'E' 'ME' '083' text-097 '' '' ''.
CALL METHOD IM_HEADER->invalidate( ).
ch_failed = 'X'.
Actually the BADI works well. But we try to prevent the user from HOLDING the purchase order if the BADI issue the error messages. It seemd that we can not get over this problem by BADI ME_PROCESS_PO_CUST. Can any friends give me some advice on the problem?? Thank you in advance.
Joe
Edited by: Joe on Dec 1, 2010 5:31 PMHi Faheem,
Thanks very much for your help. Your idea really works, but other problem occurs if we use this idea. If we issue an error message in EXIT_SAPMM06E_013 to prevent PO from being holding, all the PO data ( include header and items etc,) are cleared by program.
At last, we negotiated with users and take a non-program step to prevent the PO from being hoding.
Thanks.
Joe
Edited by: Gangrong Chen on Dec 7, 2010 10:45 AM -
HOW TO BLOCK THE PURCHASE ORDER AND MARK FOR DELETION ?
Hi ,
During the Creation of the Purchase order in the SAP System... After creation of the Purchase order should be blocked and a work item is created for the approver. If the Approver approves the Order then the Order is Unblocked and a mail send to the initiators inbox and the Order is Released. Similarly if the Approver Rejects the Purchase Order then its set for Mark for Deletion.
I did Po creation and release part. But i am facing problem during the Blocking & Unblocking the Purchase order. If he rejects i need to set for "Mark For Deletion". plz help me to solve this...Hi,
You can use bapi 'BAPI_PO_CHANGE' to change the status of PO and for release use bapi BAPI_PO_RELEASE.
Hope this will help you.
Smit -
How to get the Purchase Order sample form to have 2 detail regions?
I would like to use the "Purchase Order" sample form as the base, and add one more "detail header" and "detail" subform to it.
So I copy and paste the "detail header" + "detail" subforms, and position them right beneath the first "detail" subform.
It works to certain extend. I can click the "Add Item" button(s), and it would expand the respective "detail" region.
The problem comes when things get expanded to the 2nd page.
Say, I first add 5 rows to the 2nd "detail" region, everything still fits in one page;
then I keep adding rows to the 1st "detail" region, and it begins to expand to the 2nd page....
everything in the first "detail" region can still fit in the first page,
the rows in the 2nd "detail" region should get pushed to the 2nd page...
but when I look at the 2nd page of the form, the "detail header" on the 2nd page is that of the "FIRST" detail header, not the 2nd detail header!!
So, when you look at the entire form, you have
First Detail Header
some First Detail Rows
2nd Detail Header
some 2nd Detail rows
--- end of page 1---
--- page 2---
First Detail Header
some detail rows (can't tell if they belong to the first detail region or 2nd detail region)
This obviously is not right.
So, how do I fix it such that the Detail Header on the 2nd page is that of the 2nd Detail header???an update:
I have found out that the detail rows on the 2nd page are all that of the 2nd detail region.
so, it's like this:
when you look at the entire form, you have
First Detail Header
all the First Detail Rows
2nd Detail Header
some 2nd Detail rows
--- end of page 1---
--- page 2---
First Detail Header
some 2nd detail rows -
How to set the default selection screen
I modified screen using screen-input = 0.
then how to set the screen-input = 1.
that is how to make that field input enable.
if use the statement screen-input = 1 directly it is giving 2 fields to enter valueIn the PBO / AT SELECTION-SCREEN OUPUT
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF screen-name = <your FIELD>. " Fields by name
* IF SCREEN-GROUP1 = <your group of fields>. " Fields with MODIF ID
IF <test>.
screen-input = 1. " For input enable
ELSE.
screen-input = 0. " For input disable
ENDIF.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Regards -
How to find the Purchase Orders from Sales Order number
Hi ...
Is there a way to write a query to find the Purchase orders
from the Sales Order number ....
I have notice the table POR9 (Purchase Order - base Document)
but it seems to be empty.
Could you please help me to figure this out,
Thank you very much
Kind Regards
Sanjayahi,
u did mistake in selecting the table
SELECT T0.DocNum FROM ORDR T0 for sales order
SELECT T0.DocNum FROM OPOR T0 for purchase order
how to find the table in SAP B1.
go to above menu view => system information. tick it(or select it)
then below status bar u can see the table and field name.
open the required form and just keep the mouse cursor on any field.
you can see the table and field name below.
hope now u can able to track the table name.
regards
sandip -
Need to find how to relate the purchase order table with account assignment
i need to reterieve the account assignment from the table bbp_pdacc, what is field or any tables that is between BBP_PDACC and Purchase order number or the purchase order items. I am working on the SRM system
Jacques-Antoine,
You can't directly translate a repeating node or element (such as an Item or a Project Task from the Accounting Coding Block of an Item) to a singular node or element.
The reason is that, though your use case may have the elements assumed to be the same for all items, this isn't necessarily the case, so ByDesign won't assume that you can use that kind of logic.
The simplest approach would be to do an On-Save at the Root node of the Purchase Order along the following lines:
this.projecttaskpo = this.Item.GetLast().ItemAccountingCodingBlockDistribution.AccountingCodingBlockAssignment.ProjectTaskKey.TaskID;
i wouldn't actually recommend this code.
You'd need validations for IsInitial, IsSet, and those kinds of functions.
i'd at least use some foreach loop to check that all the accounting coding blocks were for the same task, raise warnings if they weren't, etc. -
How to consider the Purchase Orders in Long Term Planning
Hi All,
I wanted to include the Purchase Orders of Finished Material in Long Term Planning.
I have selected the check box "Long-term planning: include firmed issues and receipts" in the Planning Scenario but after LTP run system is not considering the Purchase Orders of Finished Materials for Planning.
Regards,
Shailendra
Edited by: Shailendra Hadkar on Apr 5, 2010 12:41 PMDear,
Could you please explain usage of purchase orders for Finished product?
Regards,
SAP CONS -
How to acheive the purchase order items in Crystal report
Hi
In crystal Report am using purchase order layout ,how to remove the unwanted space(i'm using only one item like cement alone so lot of space in page 1 )below screen shot show the clear view how to remove this using formula.if suppose am using 5 items that space will cover ,but for 1 item lot of empty spaces.
Regards
VinothHi Vinoth,
Please follow below Steps.
In Crystal Report for Report Footer Section -- Report >>> Section Report >>> Print at Bottom of Page >>> Uncheck
Please check attachment also.
hope thid help
Regards::::
Atul Chakraborty -
How to get the purchase order's delivery completed date in the dictionary
Hi consutant :
In me23n transaction code ,I set the delivery completed indicator mannul . I can see the state of
delivery completeed by click environment->item changes menu . But I don't find the date that I set
the state of delivery completed in the abap dictionary .
How to find that table store the date of delivery completed about purchase order ?
thanks .hi
you will get delivery date from
eket table .
and field name is eindt.
how to go there. ?
ans===>
SELECT ebeln ebelp eindt " For Delivery Date EKET
FROM eket
INTO TABLE it_eket
FOR ALL ENTRIES IN it_ekpo
WHERE ebeln = it_ekpo-ebeln
AND ebelp = it_ekpo-ebelp.
reward point if its usefull. -
How to disbale the Purchase order item texts (Material PO text)
Hi,
In ME22n, i want to disable texts for material at item level . i tried thru SPRO , but it disables header and item level texts.
How can i achieve this ?
Thanx,Hi Khushi,
I think you cannot disable them but you can delete them using T.Code OLME(But it is not suggestible).follow the path Purchase Order>Texts for Purchase Orders>Define Text Types for Item Texts. Here you have to delete.
But why you want to disable any text to be written in PO?
Thanks & Regards,
Rock.
Maybe you are looking for
-
How many gmail, etc calendars can you have show up on your iphone? I consult and therefore have 5 different email addresses and corresponding calendars. I see 4 show up now, but the Gmail shared calendar (with my ex) doesn't. Thanks for any help.
-
IPhoto won't work on my OLD imac after using migration assistant to my new imac.
So I recently used migration assistant to transfer all of my documents, music, photos, etc. to my new imac which was purchased a month ago. I used an 800 firewire and the migration was successful and there seems to be not problems on the new compute
-
Display of values in sapscript output
Hi, I am working on a sap script in which i am displaying the data coming from the program.but in 1 column there is a problem that it is not able to display the data properly i.e. it is a text which is not able to display properly. Same type of text
-
How to check for transportation cost is greater then delivery cost??
Hi all, My customer dont want to be billed if the cost of the delivery is lesser then the transportation cost... i.e if the total delivery cost is $1000.. and transport cost is $1200 then what check should put in the configuration??? please reply ASA
-
Status : GREEN in MONITOR , YELLOW in MANAGE
Hi Experts, We had scheduled a Full Upload through an infopackage. When we check the request it is green in monitor but in manage screen of the INfocube it is still Yellow. This has been occuring since last few months........manually makin the reque