How to set the report path in a model plugin

I am trying to figure out how to set the report path in a process model plug-in. I can seem to figure out how to get access to it. It seems like this would be a reasonable thing to do since the plug-ins are for results processing. Does anyone know how to do this? We typically use the Sequential process model but I am trying to keep my plug-in as independent of that as possible.
Thanks.
Solved!
Go to Solution.

If I understand, you want your plug-in, when enabled, to alter the settings of any other instances of the NI report plug-in such that their reports share the same directory as your plug-in is configured to use.
If so, your plug-in can access and modify the settings of all other plug-in instances. All instances are passed to all plug-in entries point in the plugins array sub-property of the ModelConfiguration parameter. You can iterate through this array. Any element of the array with a Base.SequenceFilename equal to "NI_ReportGenerator.seq" is an instance of the NI report plug-in. Its report options are stored in the element under PluginSpecific.Options.
You can change the report options to what ever you want. Note that the ReportOptions model callback is called from the Initialize model-plugin entry point, so you might want to ensure that your changes are applied after that, so they aren't overwritten. To do that, you could make your changes in the the Initialize entry point of your plug-in, and ensure that your plugin runs last. To make it run last, you could set the FileGlobals.ModelPluginComponentDescription.Default.Base.RunOrder in your plug-in file to a value greater than 0, such as 1.0 (see TestStand Help>>Fundamentals>>Process Model Architecture>>Process Model Plug-in Architecture>>Structure of Plug-in Sequence Files>>Model Plug-in Entry Points>>Order of Entry Point Execution at Run Time).

Similar Messages

How to set the file path dynamically based on sytem, username, and date

Hi All,
My requirement is upload the data into one structure like xyz that is related to t.code MCSZ.
file will be in UNIx SERVER .
PATH IS: /sapif
file name is xy789 load .txt
I have to write code in one user-exit
how can i set the file path for this.
shall i put hard code file path?
because i have to writecode in user-exit.
plz tell me how to set the file path based ons syetem, username, date
Thanks in advance
Ram.A

Concatenate the field SY-SYSID, SY-UNAME and SY-DATUM for the file path

Sun ONE Studio 4 aka Forte: How to set the output path for classes ?

Help !
Beginner's question:
Sun ONE Studio 4 aka Forte:
How to set the output path for classes ?
As default, the class files are created in the same directory as the
sources.
In opposite, both JBuilder and Together support that there is a tree
with the sources and another tree with the classes.
The first answer I got was "not possible with Forte, but just if you write your own "ANT Build script" !
a) Please point me to a ready-to-use ANT script for this purpose, if such is available
b) Is using ANT instead of the MAKE as comfortable ? Besides the separation of sourcecode and classes, I would like to keep everything else to be the same, i.e. I don�t want to edit the ANT file if I enlarge the project by directories or files.
Tia
Sincerely
Rolf

You can set S1S's options to place newly created .class files in a specific location.
Identify the compiler that is being used - Open the S1S's Tools/Options window, expand Editing and select Java Sources. Note the Default Compiler value. (If it's one if the Ant options, you use Ant to specify this option, not S1S.)
Open the S1S's Tools/Options window, expand Building/Compiler Types and select the appropriate compiler.
The Properties tab of the compiler has the property Target, which sets the filesystem where the compiler output is directed. If you choose <not set>, the .class files are written to their source directory.
When you set the Target, your change affects all classes that use this compiler.
Very few options can't be set in S1S; the challenge is finding out where they're set!

How to set the File Path to run a javascript using Plugin Code?

Hi All,
Im new to Indesign Plugin Development.Can any one help me out with my problem.
What i want to do is to run a javascript using Plugin Code.When i went through this forum i was able to find out that i should use the IscriptRunner Class to automate this.I could also figure out that the Member Function to use is "CanHandleFile" &"RunFile".
The first parameter in CanHandleFile & RunFile Member Function is to specify the path of the JavaScript File i suppose!I could also find out that IDFile has to used to set the file path Information.
But im clueless how to set the Javascript FilePath using IDFile.Can any one help me how to do this?Any Code Snippets Please?
Waiting for reply.
Thanks
myRiaz

Hi, Andreas Can you explain this in detail? I found it in your post before. The content of elements are returned through the Characters callback function: From ISaxContentHandler.h: /** Receives character data The parser will call this method to report each chunk of character data. SAX parsers may return all contiguous character data in a single chunk, or they may split it into several chunks. But all characters in any single event must come from the same external entity so the Locator provides useful information. Note some parsers will report whitespace using the IgnorableWhitespace() method rather than this one (validating parsers must do so). @param Chars The characters from the XML document. */ virtual void Characters(const PMString& chars) = 0; What i have done is implement my own SAXContentHandlerServiceBoss, and in my file XXXSAXContentHandler.cpp, I override the fonctions StartElement, EndElement, and Characters() like below: I add the PMString xmlData to collect the file content: class XXXSAXContentHandler : public CSAXContentHandler { void XXXSAXContentHandler::Characters(const WideString& chars) { xmlData.Append(chars); } void XXXSAXContentHandler::StartElement(const WideString& uri, const WideString& localname, const WideString& qname, ISAXAttributes* attrs) { xmlData.Append("<"); xmlData.Append(localname); xmlData.Append(">"); } void XXXSAXContentHandler::EndElement(const WideString& uri, const WideString& localname, const WideString& qname) { xmlData.Append("</"); xmlData.Append(localname); xmlData.Append(">"); } } and in my program, I use the code below to call the fonction I overrided, but I dont know how I can get the String xmlData I defined in the XXXSAXContentHandler.cpp InterfacePtr<IK2ServiceRegistry> serviceRegistry(gSession, UseDefaultIID()); InterfacePtr<IK2ServiceProvider> xmlProvider(serviceRegistry->QueryServiceProviderByClassID(kXMLParserService, kXMLParserServiceBoss)); InterfacePtr<ISAXServices> saxServices(xmlProvider, UseDefaultIID()); InterfacePtr<ISAXContentHandler> saxHandler(::CreateObject2<ISAXContentHandler>(kXXXSAXContentHandlerServiceBoss)); saxHandler->Register(saxServices); bool16 parseFailed = saxServices->ParseStream(readStream, saxHandler); Can you give me any help? Thanks and regards!

How to set the root path of XML document when calling Inserting procedure

Hi,
I was create a procedure to insert XML Document in to DBMS Tables, but i am not able to set the Start root element in calling procedure.
My calling procedure is
exec insXmldoc('pmc_sample.xml', 'pmc')
When i am calling this procedure i got this error
11:23:54 Error: ORA-29532: Java call terminated by uncaught Java exception: oracle.xml.sql.OracleXMLSQLException: Start of root element expected.
ORA-06512: at "SYS.DBMS_XMLSAVE", line 65
ORA-06512: at "SCOTT.INSPROC", line 8
ORA-06512: at line 2
I am checking my XML file using XML Validator. My XML file was parsed with out errors.
Please give the solution,and tell me where i did wrong in my calling procedure.
suppose i have this XML file in local E drive ,how to set the path for that XML file in my calling procedure.

Hi, I am doing the code likthis,please give the solution.
SQL> create or replace procedure insProc(xmlDoc IN CLOB, tableName IN VARCHAR2) is
2 insCtx DBMS_XMLSave.ctxType;
3 l_ctx dbms_xmlsave.ctxtype;
4 rows number;
5 begin
6 insCtx := DBMS_XMLSave.newContext(tableName); -- get the context handle
7 rows := DBMS_XMLSave.insertXML(insCtx,xmlDoc); -- this inserts the document
8 DBMS_XMLSave.closeContext(insCtx); -- this closes the handle
9 end;
10 /
Procedure created.
SQL> begin
2 insProc('/usr/tmp/ROWSET.xml', 'emp');
3 end;
4 /
begin
ERROR at line 1:
ORA-29532: Java call terminated by uncaught Java exception: oracle.xml.sql.OracleXMLSQLException:
Start of root element expected.
ORA-06512: at "SYS.DBMS_XMLSAVE", line 65
ORA-06512: at "SCOTT.INSPROC", line 7
ORA-06512: at line 2
Kishore B

How to set the default path of the tag while working with xtype "tags"

Hi,
I am working with xtype tag, where i have to select tags in the dialog box. Everything is fine, but my requirement is set the tags path.
Currently it is defaulted to /etc/tags and showing all the tags. Instead i have show only the single tag path that is required for me.
Is there any way where i can set the root path and set to my custom tag path like: /ets/tags/mycustomtags/
Thanks for the support in advance
Riyaz

Hi,
Use namespaces property to set the path. But it only works with namespaces that you directly creates under /etc/tags
so for example if you want to use or show two namesapces /ets/tags/mycustomtags & /ets/tags/mycustomtags1
then set this property as
namespaces       string[]             mycustomtags
                                                   mycustomtags1
and if you have only want to show one then
namespaces       string[]             mycustomtags
I hope it will help you.
Also refer http://dev.day.com/docs/en/cq/current/widgets-api/output/CQ.tagging.TagInputField.html
Let me know if you need more information.
THanks,
Pawan

How to set the class path?-

my forlder is :C:\Documents and Settings\india
jdk is in:C:\Program Files\Java\jdk1.5.0_11\bin
can any body can help me to create a classpath for my folder?

An alternative - as stated in reply 2 in your other thread on this topic: http://forum.java.sun.com/thread.jspa?threadID=5170470 - is not to set the CLASSPATH environment variable at all. Use the -classpath switch instead.
As the documentation linked to in that reply points out: "The class search path (more commonly known by the shorter name, "class path") can be set using either the -classpath option when calling a JDK tool (the preferred method) or by setting the CLASSPATH environment variable. The -classpath option is preferred because you can set it individually for each application without affecting other applications and without other applications modifying its value."
As always, the documentation is worth reading; the available command line options worth using.

How to set the Context path to AAA/BBB in Weblogic 5.1?

Hi folks,
 I want to deploy a web application and set the servlet context as:
 AAA/BBB. Put more simply, my application should be accessible via the
 following:
 http:localhost:7001/AAA/BBB/main.jsp
 where http://localhost:7001/AAA/BBB maps to my document root.
 One work around is to set the context to AAA:
 weblogic.httpd.webApp.AAA=WebAppLocation
 And in the deployment descriptor (web.xml) to register all servlets
 with a BBB/ prepended to the desired alias:
 <servlet-mapping>
 <servlet-name>main</servlet-name>
 <url-pattern>BBB/main.jsp</url-pattern>
 </servlet-mapping>
 But this solution does not work for me. Parts of the application refer
 the context root (AAA) and create URLs relative to that. These URLs
 will not have the BBB part. Searching for it in the code and replacing
 it is not desirable (we do not own the code). Does anyone have any
 suggestions?
 Thanks in advance,
 Musafir


What you have done for changing the context root to "/" is all fine but it is important to know that there is a ROOT.war in the deploy folder of JBoss which by default gets bound to "/" context. You must be getting the error message like "Web mapping already exists for deployment" when you would be starting your JBoss server after changing your context root to "/". So either you can completely remove the ROOT.war from the deploy folder or change the context-root of ROOT.war by updating its web.xml like:
<web-app>
<display-name>Welcome to JBoss</display-name>
<description>
Welcome to JBoss
</description>
*<context-param>*
*<param-name>context-root</param-name>*
*<param-value>/jboss-root</param-value>*
*</context-param>*
<servlet>
<servlet-name>Status Servlet</servlet-name>
<servlet-class>org.jboss.web.tomcat.service.StatusServlet</servlet-class>
</servlet>
</web-app>
and also update the jboss-web.xml of ROOT.war:
<jboss-web>
<security-domain>java:/jaas/jmx-console</security-domain>
*<context-root>/jboss-root</context-root>*
</jboss-web>
I hope this serves your purpose.
There can be a workaround also by modifying the index.html of ROOT.war in the deploy folder of your server and redirect request to your web application using meta refresh like:
<meta http-equiv="refresh" content="0;URL='/store'">

How to set the pll path in run time environment

kindly temme the solution for this

I have same question but my version is 6i
I also want to know is this with report too.
My scenario is i make frm folder in other folder with folder with the name of module for pll i make foler at same level at frm with the name of lib how to resolve this

How to set the initial path of a Select File dialog.

I'm using the Flex3 File.browseForOpen() method. I'm opening a xml file; but I want to seed a path to the open dialog so used don't have to do much file navigation. Is there a way to specify a path that the file browser starts in?
Thanks.
-Hays

Answering my own question.
var file:File = File.desktopDirectory; //this is the initial dirrectory as long as it's valid
file:File.addEventListener(Event.SELECT, newXMLSelected);
file:File.browseForOpen("XML", [new FileFilter("XML", "*.xml")]);

How to set the Initial path in the FILE name field of a JFilechooser?

as title
thx...

try this....
File file =null;
JFileChooser fileDemo=new JFileChooser();
fileDemo.setCurrentDirectory(new File("e:\\test"));
instead of "e:\\test" you can specify your path.

How to set the filter object in distribution model

can any one pls help me

Hi,
Go to BD64 and select your message type which you want and double click on this message type.Now a popup will display and below this popup there is a pushbutton Create filter group.Press this pushbutton then you will get the all filter object in that message type here you will add filter values.
Before that you have chekc in BD59 tcode that is any filter object required is assigned to your message type or not if no filter object not assigned to you message type then you can add your required filter fields here.
Thanks,
shyla

How to write the folder path in standard webi report - Most Accessed Documents

How to write the folder path in standard webi report - Most Accessed Documents
All
   -> Public Folders
                  -> Auditor
                  -> ABCD
I want to give path of folder 'ABCD' and all the reports/ subfolders under it?
Prompt - 'Enter the Folder Path(Add % at the end to include Sub Folders)' ?
Give me exact path syntax

Hi Daniel,
But when I give my URL as
http://serverA:80/irj/portal??NavigationTarget=ROLES://portal_content/crm-practice/14-Feb/Test_Page
I am able to access the iview but the thing is I am getting TLN,Toolarea,Masthead,etc.
I will tell my requirement,
ServerA (EP 7.0) has some iviews,pages...
I need to access these iviews from serverB(EP 6.0)....
In ServerB only the iviews has to be displayed in the content area but not TLN,Toolarea,etc.
Kindly help me in this regard.
Thanks and regards,
Purushothaman.
Message was edited by: Purushothaman Vyasarao

How to set the password encrytacion a database. Accdb from Visual Basic 2010 for a report. Rpl

I want to know how to set the password encrytacion a database. Accdb from Visual Basic 2010 for a report. Rpl

You have to connect via ODBC, then use code along the lines of what is described here:
http://scn.sap.com/thread/3526924
by me on March 28 and Jan on March 29.
Also see KBA: 1686419 - SAP Crystal Reports designer does not recognize Access *.accdb file
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

How to set the PATH in Terminal?

As a newbie to Bash and the Terminal, in connection with installing a new version of Ruby and various add-ons, I have been messing around with changing the PATH via various methods I've found on the internet, and trying to add a new directory to my PATH. Unfortunately, I cannot figure out how to set the PATH correctly. Here is what I understand so far:
1. Bash first looks to ".bash_profile" in the home directory for PATH settings.
2. If none, Bash then looks to ".bash_login" for PATH settings.
3. If none, Bash then looks to ".profile".
4. If none, Bash then looks to a system file in "/etc/profile" for default PATH settings.
5. For a new shell after login, Bash looks for a ".bashrc" file.
I cannot find any of the above files (I have Finder set to show hidden files already). Somehow, following some instructions from the internet without really knowing what I was doing over the past week I have set my PATH as follows:
/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/Users/*****/src:/usr/X11/bin
but I cannot find the file that is setting this PATH. I have tried creating a new ".bash_profile" shell file and putting it in various places such as "/bin" and "/usr/bin" but the file is not being read.
* As a temporary workaround I tried using the command "source .bash_profile" upon login to set the PATH using the .bash_profile file that I created, but it does not work.
* I am able to temporarily alter the path using the command "PATH=/usr/local/bin:$PATH" but this only lasts for an active shell; when I close out and reopen a new shell, it reverts to the default.
So my questions are:
Is it correct that there is a "/etc/profile" somewhere that is setting the default PATH? If so where is it? Should I alter it, or create a new ".bash_profile" somewhere to set the PATH? If not, where is my PATH being set? If I should create a new ".bash_profile", what exactly should go in it?
Thanks in advance for any assistance.

... I created a new ".bash_profile" file directly under my home directory and it worked like a charm. Below is the content of the file:
"PATH=/usr/local/bin:/bin/:/sbin/:/usr/bin/:/usr/sbin/:/Users/******/Ruby:/Users/*******/src:/Users/******/Java Programs/"
What are the "..."'s? Is that just you, or is the contents of the file actually inside of double quotes?
is there an 'export PATH' also in the file? As in
PATH=/usr/local/bin:/bin/:/sbin/:/usr/bin/:/usr/sbin/:/Users/******/Ruby:/Users/*******/src:/Users/******/Java Programs/
export PATH
And did you either restart your Terminal session so your .bash_profile was read, or issue a 'source .bash_profile' command to execute the .bash_profile after your change?
The only remaining problem is that from the home directory, I'm unable to directly run programs in the above-designated subdirectories (without first navigating to the subdirectory containing the file. Is there something wrong with the syntax or order of the directories I put in the path?
For example: there is a file called "newprogram.rb" in the "Ruby" directory listed above. I should be able to execute it from the home directory using "ruby newprogram.rb" but it does not work. The same command works fine from within the "Ruby" directory.
Does the 'ruby' command search PATH to find its scripts?
Have you read the "man ruby" man page to see if it talks about PATH?
A common Unix feature is that programs and scripts with the executable bit set, and are located in a PATH directory, will be run if you just type their names.
For example, if the first line of newprogram.rb script starts with
#!/usr/bin/ruby
and if the script is executable
chmod +x newprogram.rb
And if it is in a directory in PATH, then just typing
newprogram.rb
should run your perl script using /usr/bin/ruby. If you want to use a different version of Ruby, then change the #! line so it point to your version of Ruby. Or if your version of Ruby is found earlier in PATH then the /usr/bin/ruby, you can use
#!/usr/bin/env ruby
as your script's first line which will search PATH for 'ruby' and use the first one it finds.
Message was edited by: BobHarris

How to set the report path in a model plugin

Similar Messages

Maybe you are looking for