How to set the resolution of images when saving Book as HTML

How can I set a different resolution for images converted to *.GIF when I save a book as HTML? Why doesn't the conversion to JPG work?

Hi
I am running a stand-alone version of Framemaket 10.I try to convert a documentation with a lot of screenshots in it. Regardless of the settings on the Reference pages of the first document of the book, Framemaker converts all graphic files to *.gif, and these are downsized so much that they become illegible. I would like to have them converted to JPG, with little resolution loss, so they are still readable.
I think Robohelp is too expensive…
Best regards
REIDEN TECHNIK AG
Alexander Keller
Tech Writer

Similar Messages

How to set the POV in WebAnalysis when data source is HFM?

Hi Every one..
Could any one tell how to set pov in web analysis when data base is HFM. And hoe to make the report Dynamicall (Current Pov Member like in FR). for this if use Essbase Ican get it it easiliy by using Subtitutional variable but is ti possible fo rHFM.
Thnaks in advance
Rao

yeas agree with sanakar,
this field which shankar is talking about must be entry date (if u delta timestamp is date, u will also have to mention this table field name in definition of delta), this means that this field will catch last change to the record, so that it will be delta enabled based on the latest change date. This is very important becuase if u use date like posting date to the delta then back dated posting will not captured in to the delta, as delta for this back date is already been done.
Hope u understand this.

Does anyone know how to set the starting time for an audio book?

I am trying to restart a burn in iTunes that failed for an audiobook. I need to set the start time so it will not have to reburn the disks that were already completed. I cannot find out how to do that in version 11 if the book consists of more than one file. Anyone have an idea how to do this? Apple wants me to pay $20 for something that should be in the help menu.

UCCX 5.0(2)SR02 is the version
I attached a screenshot of what I am trying to use but I am not sure what to put as the value? I tried using "now" and "null" but no success.

How to set the size of applet when invoking forms through formsserver

HI,
I m using forms server to display my forms in browser, my
problem is to change the size of applet at runtime so that the
entire forms is displayed.
right now the forms whose size is more r displayed with
scrollbars.
and thats giving me problem with printing.
Sreekant

- The HEIGHT and WIDTH parameters in the HTML file are
responsible for the size
of the applet area. This is documented in the Forms online
manuals. The
manual also states that these values are in pixels.
Tip
This value can be set to a percentage of the browser's available
work space.
This means that if the browser is resized or the DISPLAY
resolution is changed
the applet area will adjust to those changes.
Example
Instead of the following:
WIDTH=800
HEIGHT=600
Change to:
WIDTH=100%
HEIGHT=100%
This will make the applet use 100% of the browser's work space.
If you
change the values to 50%, the applet will use 50% or the
browser's space.
The HEIGHT and WIDTH values can be defined in your FORMSWEB.CFG
or your own
static html file. These values can also be added to the URL when
using CGI.
NOTE: THIS WILL NOT WORK IF SEPARATEFRAME=TRUE
Regards
Grant Ronald
Forms Product Management

How to set the time in messageTextInut when i am click the submit button

Hi
In my form one messageTextInput field and submit button .when i am click the submit button the time (continuously)display in messageTextInput field.so plz tell me the process.

You can associate a VO Attribute to the textinput field and set its value when the Submit button gets clicked. Thereafter you can renavigate to the same page.

How i prevent text converting into image when exporting as a HTML FORMAT IN ADOBE FIREWORKS?

]I am an architect and wants to design my basic website with minimum graphics.
I am using coreldraw for graphics design but it is related to print (Hardcopies) and corel is not smart soft compared to adobe software.
So, for web design, I started to learn Fireworks. After some practice, i m able to design web graphics in fireworks.
But the main problem is that, when that page is exported into html format. All text were converted into Image and it is not useful.

Fireworks was devdeloped to use with Dreamweaver. It's not a stand alone app for developing web pages. Adobe Muse might be more the kind of app you are looking for. First, however, Give this tutorial a try.
http://www.adobe.com/devnet/fireworks/articles/css_export_rectangles.html

How do I set the default Hero image in a Muse slideshow widget when using Free Form Thumbnails?

Hello,
I am trying to find out how to set the default Hero image when using a Muse slideshow widget and in the Layout section I have the "Free Form Thumbnails"
box checked.
In other words, when the page loads I want to define which image displays as the first Hero image.
If I do not select the "Free Form Thumbnails" option, the top left Thumbnail image always displays first. This is fine.
But when I select the Free Form Thumbnails" checkbox I don't know how to define which image shows first as the Hero image.
I have a short video at this link where I illustrate the question:
http://amson.org/misc/default-hero-image-1.mp4
I have added a WMV video file at the link below:
http://amson.org/misc/default-hero-image-1.wmv
Okay… I think I've worked out how to do it!
[1] First have the "Free Form Thumbnails" box UNCHECKED.
[2] Organize the Thumbnails and place the image that you want to be the first Hero image when the page loads in the top left corner of the Thumbnails group.
[3] When you "Preview Site In Browser" the Thumbnail image in the top left corner will always display as the first Hero image.
[4] If you want "Free Form Thumbnails" go ahead now and SELECT that checkbox.
[5] Whichever image was in the top left of the Thumbnail group before you checked "Free Form Thumbnails" will still show up as the first Hero image when the page loads, regardless of where that thumbnail image is located within the Thumbnail images group.
Thanks very much.
Chris.

Hi,
The sequence of operation you are doing to set the home page for public users is correct. You are getting the login screen as the "custom page group" selected as "home page" has not been granted to public.
Also, while logging-out, it is normal behaviour to get the screen where it shows the list of partner applications from where user has been logged-out. When you click on "Return" button, you will get to the "home page" set above.
Hope it clarifies the things.
Regards,
Ved

How to Set up Print As Image Registry Default.

This is a response to the archived post at:
martin hrubes, "How to customize printing by registry - print as image" #, 6 Nov 2007 2:28 am
I was trying to find out how to set the "Print As Image" advanced setting to be enabled by default. Here is what I discovered through trial and error.
1. The setting is stored per user and per printer. (i.e. it has to be set for each printer for each user.)
2. The registry setting is stored in the following key:
[HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\8.0\General\cPrintAsImage]
3. In this key, each printer has a separate binary value named s0, s1, s2, etc. The number increments by 1 for each printer added. If you open the value data, you will see it contains the name of the printer encoded in hex. (ex. hex coded for \\Server\Printer1)
My recomendation is to open a pdf file in reader, go to File -> Print ->Select Desired Printer -> Click "Advanced" Options -> Enable "Print As Image" -> Click OK - Click OK again. Repeat for each printer you want to
change.
**NOTE** If you don't click OK both times (i.e. cancel the print dialog), the change will not be saved. You have to actually print something to the printer. If you don't want to print something, make sure the printer is offline or not accessible (unplug the network, usb, parallel, serial cable) first. Once the printer has been changed, it will keep the setting until to you change it.
After you have set-up all of the desired printers, open RegEdit and navigate to the above key. Right click on it, and export it. Note the file name and location you are saving to. Close RegEdit. "Edit" (Right Click) the file just exported ("Opening" the file will just import it back into the registry.). Once opened, highlight and copy the registry key and all of the registry values. Paste the key and values at the end of the file. In one of the keys change "HKEY_CURRENT_USER\" to "HKEY_USERS\.DEFAULT\". Save and exit the file.
When imported this file will enable the "Print As Image" setting for the currently logged in user plus add the setting to the default users profile so any new users to the machine will have it enabled by default also. However, it will not add it to any other user profiles that already exist on the computer. To do this, either use a login script for domain computers or add the reg file to the "All Users Startup" folder.
It would be nice to have a setting in the deployment custimazation wizard to handle this, but for now we're stuck with enabling it the hard way.

Yes Spyla, please see this link http://www.404techsupport.com/2008/09/09/make-adobe-reader-and-adobe-acrobat-use-print-as- image-setting-by-default-2/comment-page-1/#comment-3112.
Allan, many thanks for your post, it certainly helped point me in the right direction. what I found though is that you do not need to tick the print as image box at any point during the setting up of this. All you need to do is add the registry key for whichever version of Adobe you are using for this to work. So basically. what you are saying for each instance of Adobe is regardless of whether or not the print as image is selected, the registry key is saying always print as image for the printer as specified by the hex code. I have found that for network printers, you have to include the full path i.e. \\<servername>\<printername> e.g \\testserver\printer1 and convert all of that to hex. With later versions (9 up over), they have allowed for the string name of the printer so that it is just plain text which also makes life easier.
What I do is apply this registry entry via Group Policy on a per room basis so that we only ever need to add one printer to the list. you could do this globally by adding all printers sequentially using s0, s1, s2 or t0, t1, t2 etc depending on which version you are using. The screenshot shows the registry key for 1 printer for Adobe Reader 8.
The value data is the binary code for the actual full printer name
This works a treat.
Hope this helps
Thanks

Setting the resolution of a Pages document

I'd be very grateful if some kind soul could tell me how to set the resolution of a new document in Pages.
I want to use Pages to create an advert for inclusion in a magazine. They need artwork at 300dpi resolution and preferably in jpeg format. I've tried adding an image (300dpi) to a blank Pages document then saving it as a pdf (via File>Print) then opening the pdf in Preview and saving it as a jpeg. However, the resulting jpeg is only 150dpi for some reason.
Any help (or easier method, or tip for what other application is more suitable for this job) would be much appreciated!
Michael

I'd be very grateful if some kind soul could tell me how to set the resolution of a new document in Pages.
I want to use Pages to create an advert for inclusion in a magazine. They need artwork at 300dpi resolution and preferably in jpeg format. I've tried adding an image (300dpi) to a blank Pages document then saving it as a pdf (via File>Print) then opening the pdf in Preview and saving it as a jpeg. However, the resulting jpeg is only 150dpi for some reason.
Any help (or easier method, or tip for what other application is more suitable for this job) would be much appreciated!
Michael

How is the resolution variable or when would we change the resolution of an image and why?

How is the resolution variable or when would we change the resolution of an image
and why?

It all depends on the output:
* for viewing on screen 90 -120 ppi
* for printing on a laser printer 180 -300 ppi
* for printing on a desktop printer 240 - 300 ppi
Some people claim 360 ppi is optimum but I don't see any difference compaired to 300 ppi at least not with the naked eye...

Sending image sequence job to compressor in command line : how to set the framerate?

Hello,
In Compressor, when you import a image sequence, it's possible to set the framerate and add an audio file before choosing a preset and lauching the encoding task.
I want to dlo the same thing with command line. I know how to send a compressor job with command line, but no how to add theses settings.
In the compressor command line help, we've got this :
Job Info: Used when submitting individual source files. Following parameters are repeated to enter multiple job targets in a batch
          -jobpath <url> -- url to source file.
                                           -- In case of Image Sequence, URL should be a file URL pointing to directory with image sequence.
                                           -- Additional parameters may be specified to set frameRate (e.g. frameRate=29.97) and audio file (e.g. audio=/usr/me/myaudiofile.mov).
So there are also framerate and audio parameters in command line but i've no idea how to write the command line with theses parameters
Here is an example of command line for Compressor (by Apple) :
./Compressor ‑clusterid tcp://127.0.0.1:51737 ‑batchname myBatch ‑jobpath /Volumes/Source/ShortClips/NTSC24p.mov ‑settingpath /Users/stomper10/Library/Application\ Support/Compressor/PhotoJPEG.setting ‑destinationpath /Users/machinename/Movies/myDestinationFilename.mov.
Thank you for your help!

You can see in the command sh running-config command
show running-config : Displays the current access point operating configuration
Use the guest-mode SSID configuration mode command to configure the radio interface (for the specified SSID) to support guest mode. Use the no form of the command to disable the guest mode.
[no] guest-mode .
Here is the guideline for usage
The access point can have one guest-mode SSID or none at all. The guest-mode SSID is used in beacon frames and response frames to probe requests that specify the empty or wildcard SSID. If no guest-mode SSID exists, the beacon contains no SSID and probe requests with the wildcard SSID are ignored. Disabling the guest mode makes the networks slightly more secure. Enabling the guest mode helps clients that passively scan (do not transmit) associate with the access point. It also allows clients configured without a SSID to associate.
Examples
This example shows how to set the wireless LAN for the specified SSID into guest mode:
AP(config-if-ssid)# guest-mode
This example shows how to reset the guest-mode parameter to default values:
AP(config-if-ssid)# no guest-mode

How to set the source property of image control dynamically?

Hi,
I have different fxg files which I want to display in a list. For each row in the List, I define which fxg file to be displayed in my database.
I need to know how to set the image1.source = (the fxg path) as a string from database?
Is there any conversion needed in this case? If so, can you please help me how to do this?

Hi,
Thank you for your response. I am new to Adobe Flash Builder, Flex and action script. I don't get your answer straight away.
What I basically need is, I need to set image1.source = strFXG. Right now, this does not show the image. I don't understand fxgObject.pathid.source => how to give this?
Moreover, when I did google search, there is somethink like fxg converter which converts the fxg to a component. I thought this is a very simple problem on how to convert the fxg string to an object format. But now, it looks like it might be a big problem. Can anyone help me in this?
import spark.components.Image;
                              protected function view1_creationCompleteHandler(event:FlexEvent):void
// TODO Auto-generated method stub
var strFXG:String = 'assets.DB_Actief_Graphics';
                                        var image1:Image = new Image();
                                        image1.x = 100;
                                        image1.y = 100;
                                        image1.source = strFXG;
                                        addElement(image1);
Regards,
Chella

Does any body knows how to detect the resolution of an inserted image in word?

Does any body knows how to detect the resolution of an inserted image in word?

I'm not sure I understand your reply but when you insert images into Word that are larger than will fit on the page, they are automatically compressed. If you right click and select Size and Position you can restore it to 100% but you will not see all the image.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How to set jpeg resolution when saving pdf file as jpeg

I'm running Acrobat using interprocess api, I can invoke a script to save a pdf file as JPEG, but I need to be able to set the resolution of the saved jpeg file.
Any clues as to how I can do that ?
Peter

Hi
I am running a stand-alone version of Framemaket 10.I try to convert a documentation with a lot of screenshots in it. Regardless of the settings on the Reference pages of the first document of the book, Framemaker converts all graphic files to *.gif, and these are downsized so much that they become illegible. I would like to have them converted to JPG, with little resolution loss, so they are still readable.
I think Robohelp is too expensive…
Best regards
REIDEN TECHNIK AG
Alexander Keller
Tech Writer

How can I set the resolution of my external display to 1280x800?

Hi, I'm using a Wacom Cintiq 12WX external pen tablet display with a 24" iMac.
The recommended resolution for this Cintiq is 1280x800. But when I go to System Preferences>Displays set the resolution of the display, the only available options for "Wacom Cintiq 12WX" are:
640x480
800x600
832x624
848x480
1024x768
1024x768 is my nearest option, but it has a different proportion than the display's physical shape--resulting in a slightly stretched display. Because I work with graphic design, this is not exactly desirable...
None of the other resolutions have the same proportion as 1280x800, so a stretch seems inevitable; not even working with a smaller resolution will give me the desired ratio.
So my question is, is there any way to choose resolutions other than those listed in the "Display tab" of System Preferences?
I also noticed that I have the option to rotate the tablet screen 90 degrees; when I do this, the option 800x1280 becomes available, but of course it's sideways...
Any help at all would be very greatly appreciated!

thund3r0us wrote:
Thank you for your help.
I installed the update you suggested, but nothing has changed in my Cintiq 12WX Display menu in System Preferences.
Which update ?
The OSX update or the driver update or both ?
Might be neccessary to reinstall the Wacom driver after the OSX update.
And I concur with Kenichi, if all things fail contact the Wacom Support.
That thing has to work as advertised.
Good Luck
Stefan

How to set the resolution of images when saving Book as HTML

Similar Messages

Maybe you are looking for