How to set the RFQ creator as the doc owner of the RFx created from RFQ

Hi,
   I know for sure that when we add the DOC_OWNER_USER to a csv/xml file to import MAu2019s using the schedule task,  the MA document is created by the schedule task Run As user but the MA Doc Owner is set to the user who is passed in the DOC_OWNER_USER column.
In the RFQRFx process the standard mapping does not send this information from ECC. But we have customized the ORDERS05 IDOC to send the RFQ creator and made changes to the standard mapping in PI to map this information to  the standard field DOC_OWNER_USER  in the XML sent to Sourcing.
But when this xml is imported, the document owner of the RFx  is still being set to the scheduled task Run As user instead of the DOC_OWNER_USER passed from ECC.
The import manager is not recognizing the DOC_OWNER_USER field and not  taking the appropriate action to set this user as the owner.  Have you guys faced similar issues? Can I report this as a BUG or do I need to handle this through scripting??
Regards
Rachith

Thanks for the reply Jaap.
It was really helpful. But i need further help on this.
I need to change the browser title based on the tab selected. And here the tabs on spaces page is actually coming from a custom task flow. Any idea how can i achieve this? And there is no page refresh involved.
Some help on this please.
Thanks

Similar Messages

  • How to set up Email in S60v3/5/^3 and bypass the N...

    There are many threads on this board that all say the same thing and usually are about how Nokia Messaging or email is not working or syncing.
    In an effort to have a base-line to assist with these, I have made the following tutorial to help users to bypass the Nokia Messaging (NM) as it is the auto-default to set up email on Nokia devices.
    NM allows for “push” email, which will not keep you constantly online and will allow for marking your server email with what you have on your device.  Ie-if it is read on the device, it will be marked as read on the server, deleted, then deleted, etc. 
    When you bypass the NM, you will lose the “push” but you can setup most email as an IMAP4 which will do the same thing, and you can select what folders to sync, and how often to have them sync, not keeping you online.
    This tutorial was done on a Symbian s60v5 device, and while some of the dialog may be different among devices, the process is relatively the same when bypassing NM.
    Open the email client, select options
    Select Settings
    Select E-mail
    Select Mailboxes
    Options
    New mailbox
    E-mal wizard will show up, tap Start
    Next screen, Preparing for installation:
    If asked, allow to use network.  It will default to network to allow for set-up of NM.
    If first time setting up email, this screen will show, “Welcome to E-mail setup”  after you have done it once, it may not show up.  Tap Start.
    Enter E-mail address, then tap OK
    Splash screen
    Enter Password, then tap Ok.
    Splash screen
    This is the screen where you can choose between the NM and the internal email client.  Aka, Terms of Service (on some devices you have to “agree”) (aka-TOS).  The default  is Yes! Activate my Nokia Messaging account, and if you have already set one up, it will say, “Add to my Nokia Messaging account.
    You need to select “No Thanks.  I’ll check for new messages manually.” Or “Create a separate account that uses manual delivery.
    Splash screen
    Confirmation screen. Select Ok.
    Your new mailbox may not show up in the next screen which is supposed to show all the mailboxes set up.  It is a slight glitch in some phones.  Just tap the back button and then mailboxes, then you should see it set-up in the mailboxes as shown.  Highlight your new mailbox and then select options to setup the settings of the email address. 
    You will need your inbound and outbound server settings and ports and securities if needed.  You should be able to google for the various email types and if it is a company email, you should be able to get this information from your system admins.
    The following are just some screen shots so that you can see the process to follow.  While the NM will sync and mark messages as read the same in the inbox, if you set up your email as an IMAP4, it will do the same and sync all the folders on the server as well.  There is an option to for how frequent you would like your email to auto-sync, just as with the NM.  AND what days you would like it to work!
    As there are older, the same, and newer versions of the Symbian and NM, this should help many people as least have the right guidance to bypass it if they wish and get on with consistent email service without using the NM.

    I managed to set up an account manually on the C7 but I had to trick the email application by entering an invalid email address and password. After it could not find my account it then opened up all the settings and permitted me to add the manual IMAP settings, reply to address and other details. After I committed the settings, the phone recognised the account as a gmail account and it locked down all the settings again so I could not go back and change them if wrong. 
    I was quite chuffed with myself for seemingly resolving all my issues.....but on using the new account settings I could not sync the gmail sent / bin folders. All the other folders synchronised fine and when I send email it has the correct reply to address. Strangely this matches the best results I obtained when connecting using the Mail for Exchange settings so am no further forward. I am a little confused by this as when I let the phone set up the Gmail account on it's own it can sync everything.....but I just can't 
    I am now hoping that the new software update (PR1.2) gets email working a little better....well when I eventually get it hehe.

  • How to set up same timezone in BI Publisher for all the USERS?

    Hi Experts,
    My OBIEE version is 11.1.1.6.6  and any user can go into the My Account and then preferences  and set the timezone.
    But as an admin, i see they are too many users and wanted to setup common timezone for all of them.
    How do i setup common timezone in BI Publisher for all the users?
    Thanks
    Ashish

    Check
    Time Zone Specification from http://docs.oracle.com/cd/E12844_01/doc/bip.1013/e12187/T421739T481157.htm#4535403
    just in case https://blogs.oracle.com/xmlpublisher/entry/how_to_keep_your_dates_from_go

  • How to set FBL1N T code Layout to default to all the users using this T cod

    Dear Friends
    I have created a new layout by modifying the some of the fields in FBL1N T code output.  I want to set as default layout to all the users using this T Code. Is there any way we can set the  custom layout as default layout  to all the users.
    Presently Only I can see as default layout but  not the other users
    Thanks in Advance
    Thanks
    MVS

    Hi
    I have one above like issue but in FB03, I have been one layout as default using -lay admin when i come back and re execute the
    FB03 transaction  the default lay out not working directly every time i have to  "display as list from the" Go to" menu then only
    document showing as per lay out..I want  that lay out has to be work with out  going to Dispaly as list
    please advice me where i did wrong .its not working  even after the changes i log out the from the SAP and re login
    thanks
    Ranamka
    Edited by: Ranamka on Mar 10, 2011 9:59 PM

  • How to set up facetime with iPad and MacPro that have the same Apple ID?

    I have a iPad and a MacPro both with the same Apple ID but they are different locations. I am using the iPad in NY and my husband is using the MacPro in a different location. I cannot call him on the MacPro with facetime. When I call the message says "....not available"

    Hello Susan Dietz,
    Much like calling from one phone to another, you would need a separate Apple ID to contact with FaceTime (just as calling your own phone number would direct you to your own voicemail, rather than ring your phone).
    iOS: Using FaceTime
    http://support.apple.com/kb/HT4319
    Create an Apple ID.
    https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/wa/createAppleId?loca lang=en_US
    Cheers,
    Allen

  • How to set a default folder for Live Bookmarks ( instead of the bookmarks toolbar folder ) ?

    When I subscribe to a RSS feed, Live Bookmarks put these in the "Bookmarks Toolbar" folder by default.
    I'll like to change this default folder to another one into the bookmarks ( like the firefox : "Subcribed Feeds" folder )
    Thanks

    Hi Andrew
    The short answer is that I dont think you can change the default "browse folder". It will let the end users browse whatever folders they have the permission to view. But you can solve your problem in some other ways, like:
    1) Remove any permissions regarding the root folder for the end users. In this way they will not be able to browse it through the search component. Configure permissions for all other folders you dont want end users to access.
    2) Create a range of meaningful indexes and only let the user search the indexes (with a meaningful name), not the folders. If you like, you can hide the folder search option by adding &EnableSearchFromFolder=False to the KM search parameters (search the forum for more info).
    3) Give the users access to a simple KM navigation iview with a customized layoutset that only lets the end user browse the documents repository and contains a link to the UI command "search_from_here" which will "Opens a dialog box for searching within the current folder or subfolders" (taken from the description of the ui command).
    Best regards,
    Martin Søgaard

  • How to Set corrid using JMS adapter in ESB while inserting the data in JMS

    Hello all,
    Can any one help me in setting the corrid using JMS adapter in ESB.
    I haven't been able to find any clues.
    We can do this in BPEL but my adapter is in ESB and i have no idea how this can be done in ESB.
    Your help is highly appreciated.
    Thanks,
    Saurav
    Edited by: sauravsingla on Oct 7, 2009 10:46 AM

    hi
    you could do this from and xsl transformatuion by use of the .. function
    see :
    http://biemond.blogspot.com/2008/02/esb-adapter-failover.html
    http://kr.forums.oracle.com/forums/thread.jspa?threadID=658502 (comment of AmitSoaDev, he sets correlationid too)
    hope this helps, gl

  • How to set SPD workflow to send email one day before the Due Date? ?

    I need to add a step in workflow for a item tracking list: send reminder email one day before the due date.
    I thought there is an Action in SPD: wait for [Due Date] to equal [Today]minus one day
    But there is no way to do that.
    I figured may be I need to create a calculated field [cal-date] that set to: =[today] plus one day.
    Then in workflow -
    wait till [Due Date] is equal to [cal-date], and send an email
    What is the formula for the above calculated field [Today] plus one day?

    Hi,
    You can add an approval action( such as Start Approval Process) -> click "Approval" -> go to “Change the behavior of a single task” . Then you will
    see the "When Task expires" stage.
    You can have a look at the blog:
    https://www.nothingbutsharepoint.com/sites/eusp/Pages/5-Steps-to-Enhance-SharePoint-2010-Approval-Workflow.aspx 
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers
    if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
    Eric Tao
    TechNet Community Support

  • How to set a default trust store just for DirContext not the whole JVM

    I need to connect to a secure LDAP server ( URL is ldaps://..../). The Server certificate in this LDAP server is a self signed cert so I need to put this certificate in my Keystore as well for me to connect to it.
    My code is something like :
      DirContext ctx=null;
        Properties prop = .... ;
        // I set URL etc. in this.
        KeyStore ks = some_function_call();
        // save this keystore to file
        java.io.FileOutputStream fos =  new java.io.FileOutputStream("/tmp/newKeyStoreName.jks");
        char[] password = .....
        ks.store(fos, password);
        fos.close();
        // set this keystore as the default Keystore.
        System.setProperty("javax.net.ssl.trustStore", "/tmp/newKeyStoreName.jks");
        System.setProperty("javax.net.ssl.trustStorePassword", ...);
        System.setProperty("javax.net.ssl.trustStoreType", "jks");
        ctx = new InitialDirContext(prop);My problem is when I do a System.setProperty it makes it the default trust store for the whole JVM. I want a solution that would use this trust store only for the DirContext as I do not want this keystore to be used for other parts of my code. And its an MT application so setting keystore back to default one after this LDAP query gets over won't work.
    I tried changing System.setProperty to props.put() it doesn't work.
    Any ideas?

    I have the same problem. I have to make 2 different SSL calls to 2 different 2 servers and if I set to System truststore and keystore properties I have a problem, 'cause those are different for each server.
    I you have found the solution in the meanwhile, maybe you can write it here.
    thanks,
    Mihai

  • How to set first column as date (dd/mm/yyyy) in the specific format in excel

    hi need help wat i did need help is tht i need wen ever i send view a excel data  the first column set to date  but some times wen i view in different type of pc the date format change to mm/dd/yyyy. is  thr any way i can set the format?

    If you just need to reformat a correct date to show up as dd/mm/yyyy, just use the "Format Cells" command and set a custom format string to exactly that. If, on the other hand, you are finding that Excel just doesn't get that the first value is a DAY, not a month, such as trying to graph a temperature data logger that records data in dd/mm/yyyy:
    Reformat the strings as dd/mm/yyyy, using the first method. This will make them LOOK correct, even though the actual date VALUES are still day-month inverted. Now save the table as a .CSV file. This will save the dates as plain text in the correct order, which you can then re-import and have Excel now read the correct date value.
    Ryan R.
    R&D

  • How to set up LPD printer properly? I just upgraded to Snow Leopard from 10.4.  I can not get my laser printer to work.

    OK, here is what I have found.  Since the printer is on an ethernet network it can not be seen since there is no more apple talk.  I must set it up as a LPD printer.  Xante tech support has told me how to do this but they are baffled by the fact that it will not print.  I am using a Linksys wireless/broadband router.
    These are my numbers:
    IP 192.168.1.110
    subnet mask: 255.255.255.0
    Router: 192.188.1.1
    DNS Server" 66.103.237.2.66.103.251.130
    Xante has suggested using 192.168.1.112 and the printer is found and the print queue is opened and the following message is in the print queue window: Network host '192.168.1.112' is busy; will retry in 10 seconds...  Nothing ever prints.
    On this list I have seen a successful connection in the past through an airport connection.  I think that the number that Xante has suggested is not correct.
    I am able to print to this printer through another computer on the network that has not been upgraded to Leopard.
    Any thoughts?  Thanks

    The best answer to this question requires a little more digging.
    More specifically, what spare inputs do you have on the TV, and what video card are you currently driving.
    IMHO S-Video is going to give you about a poor a picture as you can get, mostly because of the limited bandwidth and the fact it's based around standard resolution TV (e.g. NTSC signaling).
    The best experience would be via HDMI, but for that you'd need a video card with a DVI interface, plus a DVI -> HDMI cable. If you don't have a DVI-based video card and you're OK spending a few dollars that would be your best bet, although off hand I don't know specifically which card you'd need - most of the modern cards are PCI-X or PCIe and won't work in the G4.
    If you don't want to replace the card then you'll need to let us know what kind of video card you have in it so that we can find the best match.

  • When I click PRINT for a PDF file, a window pops up asking me to "save the file as" an xxps doc.. The page dows not print even if I click save. I do not want this "save" window will not printh

    How can I eliminate this seemingly automatic "save" window. Just want to print the pdf.
    THANK YOU!

    Deleted it, restarted it. tried it again. no change. repeated the whole cycle. no change. thinking about uninstalling and reinstalling, but that won't reallyk change the settings.

  • How do you set a calendar alarm for a specific time on the day of the event without it being an all-day event

    Does anyone know how to set a calendar alert at a specific time on the day of the event.
    So that the alert date adjusts accordingly if you were to copy and past it to another date.
    The custom alert function kind of does this, but because it is an absolute alert (not relative) it will still refer to the date you initially set it to when you copy and paste it to another date. So this creates more work where you would have to go and manually change all the custom alerts. I have potential
    Anyone know how to set this kind of calendar alert?
    Thanks in advance

    Greetings: Set the alarm to message you (on your screen) and then snooze it every day for 15 days, or, set 15 separate alarm messages. There is probably an AppleScript somewhere on the web too, try searching that way as well.

  • HT4587 How to set up an older version Airport Express on the 6.2 Utility

    I have a older version of Aiport Express  (M9470LL/A model A1084) and I get the following message when I try to set it up with the Airport Utility Version 6.2 on my iMac with Snow Leopard 10.8.2. -
    "This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information."
    Any advice on how to set it up ?

    Mountain Lion no longer supports the older A1084 AirPort Express that you have.
    If you want to try a workaround.....not supported by Apple.....see this article to find out how to add another version of AirPort Utility that will work with Mountain Lion and hopefully allow you to configure the AirPort Express that you have.
    http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

  • HT1751 Not all the music I have in Itunes is in the Itunes library, how do I make sure all is there to transfer to new computer

    I am trying to move my Itunes Library to a different computer. When I put the Itunes library onto the external hard drive it only had a portion of the songs. Alot did not copy over. How do I make sure that all the songs in Itunes are in the Itunes Library stored on my computer?

    These are two possible approaches that will normally work to move an existing library to a new computer.
    Method 1
    Backup the library with this User Tip.
    Deauthorize the old computer if you no longer want to access protected content on it.
    Restore the backup to your new computer using the same tool used to back it up.
    Keep your backup up-to-date in future.
    Method 2
    Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
    Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
    I'd recommend method 1 since it establishes an ongoing backup for your library.
    Note if you have iOS devices and haven't moved your contacts and calendar items across then you should create one dummy entry of each in your new profile and iTunes should  merge the existing data from the device.
    If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
    Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
    tt2

Maybe you are looking for