How to set the router and play the Command & Conquer using direct IP mode?

My router is WRT54GFirmware Version: v3.03.1
How to set the router and play the Command & Conquer using direct IP mode with other computer?

Hi, when you say direct IP mode, what do you mean ? do you wanna play the game online or on the LAN ??
can you give a few more details.

Similar Messages

  • My iPad2 no longer connects to my home wifi network but there is no problem connecting to other saved wifi networks. Currently using iOS8.0.2. with storage capacity of 12.2Gb but only 147Mb free. Disconnecting the router and rebooting the iPad worked

    My iPad2 no longer connects to my home wifi network but there is no problem connecting to other saved wifi networks. Currently using iOS8.0.2. with storage capacity of 12.2Gb but only 147Mb free. Disconnecting the router and rebooting the iPad worked briefly as a temporary fix but not anymore

    You could try this
    Temporarily disable security on your home network
    See if the iPad connects
    If it does then reset the security - with the same or different password

  • Replacing the router (and maybe the modem)

    I've had loads of problems with my infinity. Essentially it is incredibly variable, going from the full 75MB/s DL to 0.37 MB/s DL which gets very annoying. A lot of my devices also tend to lose the wireless despite being in the same room as the modem/router. I know the problem doesn't lie with the devices as they work everywhere else, therefore I am looking to change the modem/router.
    I purchased this one a while back it's the Netgear N300 Dual Band Modem-Router. I am just wondering if it is able to completely replace the modem and the router, or even just the router? I.e. will it work with infinity?
    If it won't work, can anyone suggest an alternative router for me?
    Many thanks

    chayes030 wrote:
    So we've spent a long time living with these problems and I got fed up and tried to get one of my friends to play about with the netgear modem-router i got, to get it working. unfortunately he couldn't link it up to actually get the internet, and he thought it was because the router wasn't actually recognising the modem and therefore picking up the internet.
    I'm just wondering on the routers set-up bit, there's an area where it asks if my internet connection requires a password, is that where I put in the Homehub login details?
    If i'm spouting rubbish point me in the direction of a step-by-step guide on what to do (i've tried searching myself but i don't think i know what i'm actually looking for!!) and i'll follow that to the letter and see if it works!!
    Hi there,
    First off, make sure that you're connecting the ethernet cable that's coming from the OpenReach modem to the port marked WAN on the back of your router. If you connect it to any of the other ports, it won't see the connection.
    Another thing you need to do is in the username/password fields for your connection the login would be [email protected] and the password is anything you like, but most people just use "bt" - Just don't leave it blank, or it won't connect.
    See below for a screenie (A picture tells a thousand words and all that)
    I hope this info helps

  • How to shuffle on albums and not the individual tracks on albums

    This is breaking my head.
    I have ripped my CD's in iTunes and now i have a large number of songs.
    I have a playlist that is uploaded to my iPod Shuffle.
    But my Q is:
    How can i shuffle on my iPod shuffle between albums instead of the individual songs.
    I have seen the playback options in the advanced section saying shoffle by Album. But that options does not appear to have any effect on the shuffling on my iPod.
    Any ideas
    Thanks
    Jitse

    If you want to shuffle a single album go to Settings
    -> Shuffle and set to Songs.
    The go to Music -> Albums (or Music -> Artists->
    Albums), select an album then press Play.
    If you want to play albums at random, Settings ->
    Shuffle - Album.
    When you play anything, it will play a song at
    randiom, then play in order the songs on that album
    (if it start at song #3, it will play #3 thru end)
    then go to another random song in the selection and
    play the remainder of that album.
    All well and good... B U T the OP (and this thread) was talking about doing it on a Shuffle:
    "...I have a playlist that is uploaded to my iPod Shuffle.
    But my Q is:
    How can i shuffle on my iPod shuffle between albums instead of the individual songs..."
    Get it?

  • Using CAN bus to transport and play the stream audio data

    hello,
    Just want to build a PC-Based control network using CAN bus (Ethernet not considered).The system is separated two parts , one is the front unit(FU), and the other is the centeral unit(CU). FU performs dialing-up number to the CU , and play the stream audio media data come from CU, CU monitor the telephone call activated from FU's user , send rm or mp3 data to the FU . I'd like to know if CAN bus could realize this function? if it can , which hardware must be supplied ? Is there any suggestion that not use PBX to realize the voice (telphone) communication ? Please give an solution , your advise is greatly appreciated . Thanks.
    David

    Hi David,
    the CAN protocol essentially just gives you the ability to transfer (broadcast) up to eight data bytes across the network at a maximum data rate of 1 Mbit/s.
    There are so-called higher level (or layer) protocols that further specify the data exchange between a data producer can the consumer (DeviceNet, CANopen, etc.).
    If your application is not tied to any of those protocols, that means you have the freedom to design all (CAN) nodes of your network, you can implement your own protocol based on the eight data bytes and the arbitration ID CAN offers.
    For more information on the CAN protocol, take a look at appendix B of the NI-CAN Hardware and Software Manual, or visit the web site of CAN in Automation (CiA).
    For your particular application you would need a CAN port on both the FU and the CU (preferably high-speed physical layer) and a PCI interface CAN card for you development.
    -B2k

  • How to Ignore chapter markers and play track without interruption to end

    I have imported an FCP track with half a dozen markers in it.
    In the main menu I link to this track and want to play it through in its entirety without stopping
    In a separate Chapter Menu button, I link to a bunch of submenus so you can play each chapter separately.
    Ever since putting in the submenus, the track won't play in its entirety and stops and goes back to the main menu when the play head hits the first chapter marker.
    How can I make it do what I want?
    Also, what is the accepted practice with chapters...does one set them to go right to the end of the track or just to come back to the submenu where they were first started?
    TB

    Yes, I did,, but in desperation, I removed all the menus except the main menu...so now I have
    just a DVD with Two tracks in it. When I play the first track, it plays to the first chapter marker then suddenly jumps to the end and plays the last few secs....Do I need to start all over again with a fresh import?

  • Please Help, Setting up router and AirPort with port forwarding

    If anyone can help me it would be greatly appreciated.
    I have a DSL Router supplying my internet connection, this is then connected to my AirPort Base station and distributes my internet connection to my two Macs and my two iPhones. Everything is working fine, however I want to forward some of the ports and I cannot do this since the base station is in bridge mode. If I take the AirPort base station out of bridge mode it gives me an error that say's Double NAT.
    Thanks in advance for any help.

    "When the AirPort Extreme base station (AEBS) is in bridge mode every port is already forwarded directly through the AEBS. ... Therefore the option to forward ports is unneeded and not available."
    I don't believe this to be true. Isn't port forwarding done on the router and not the AEBS, as it is not a router?
    Go into your DSL router by typing the routers address (found in the network pane in system preferences) into your browser's window. This should take you to your log-on page on your router.

  • How do I set MacBook to an external display when the plug and play doesn't recognize it?  I am trying to set my Samsung 530 LCD as a monitor but HDMI and VGA cords (and the adaptor for them) doesn't seem to work.

    I have tried everything I can find on line but they all claim that the plug and play works, and they don't for me.  I tried the mini dvi to HDMI and a HDMI cord and that was not recognized no matter which unit I rebooted first.  I found someone who said that my Macbook might be too old for the HDMI technology so I returned the cords and went to the VGA cord and adaptor.
    I tried this first with the HDMI setup:
    http://support-us.samsung.com/cyber/popup/iframe/pop_troubleshooting_fr.jsp?idx= 167919&modelname=LN40C650L1F&modelcode=&session_id=NDhJrD0DQT0Z8KRsm62yhxJxqnyPy SKhlhpB8vQ6h9Q7R2BZJGzj!-1089109758!1761676444!7501!-1!434477884!1761676348!7501 !-1!1292098185857
    Then I tried this with the VGA setup:
    http://support-us.samsung.com/cyber/popup/iframe/pop_troubleshooting_fr.jsp?idx= 167901&modelname=LN40C650L1F&modelcode=&session_id=NDhJrD0DQT0Z8KRsm62yhxJxqnyPy SKhlhpB8vQ6h9Q7R2BZJGzj!-1089109758!1761676444!7501!-1!434477884!1761676348!7501 !-1!1292098185857
    I contacted Samsung support and they said I needed to set the display settings to external display on the mac.  I went to the display settings and moved the icon to my status bar.  When I click on search for displays or whatever it says (I'm not at my Mac right now) it does nothing.
    What am I missing?

    I am using MAC OSx 10.5.8 (9L31a) as my operation system.  The TV says "No signal.  Check connected device's power, cable connection and source selection."  Seems to me that that goes in hand with what the Samsung tech said about the Mac needing to be forces to use the external display.  But how do I do that?

  • My ipad does not have the amount of GB on the back and in the settings it says 56gb! Also there is no setting called regulatory. It is an ipad 4 retina w wifi that i got as a Christmas present. Could it be a fake? How can i tell?

    My ipad does not have the amount of GB on the back and in the settings it says 56gb! Also there is no setting called regulatory. It is an ipad 4 retina w wifi that i got as a Christmas present. Could it be a fake? How can i tell?

    The amount of storage that is shown on the box and in Settings are calculated differently - the package uses 1 billion bytes as a gig (i.e. decimal), whereas in Settings it's shown as the binary definition : http://support.apple.com/kb/TS2419
    Also some space has been used for iOS, the built-in app and some space is lost due to formatting.

  • TS1717 I just downloaded a song and it only plays the first 50 seconds and then moves to the next song in the list. How can I get it to play the rest of the song?

    I just downloaded a song and it only plays the first 50 seconds and then moves to the next song in the list. How can I get it to play the rest of the song?

    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copy of the track and try redownloading a fresh one. See the following document for instructions:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

  • How can I play an album in order on my iphone?  The shuffle is turned off both on the phone and when the phone is sync'd but it continues to shuffle.

    How can I play songs from an album in order on my iphone 4?  The shyuffle is turned off both on the phone and on the device when I sync the phone with my iMac but it continues to shuffle.  All the songs in the album have been checked in iTunes.

    Bill, you ignorant moron.  Turn off the ultra secret hidden shuffle diabolically placed behind the album cover.  Just tap the album cover to expose the sinister little shuffle icon on the right.  Is it blue?  Well, tap it until it is no longer blue! Also, make sure you are in your playlist and not the genius playlist. 
    Hope this helps!  Now, who's ready for ice cream?  Or do  you want to "shyuffle" some more, you weirdo?!?

  • How to set Multi User Environment in the weblogic 5.1 and 6.1 server..(Urgently)

    Hi all,
    I need to know how to set Multi User Environment in the weblogic 5.1
    properties file..
    Here my question is..:)
    1) I have a database with multiple users and having different privileges
    for the users.. and i need to use all the privileges when user aceess
    the database through weblogic server connectionPool.
    2)According to the user privileges i need access the database tables
    content and gives the frontEnd(jsp).
    3)How to modify dynamically weblogic.properties file in the weblogic
    5.1.
    If anybody having idea reg. this issues pl...help me..
    Thanks in advance
    Chandu([email protected],[email protected])

    Hi. A JDBC connection pool is a set of identical, interchangeable, pre-made
    connections, and the controls to make sure only one user uses a particular
    connection at any one time. If you want to have different DBMS users, you can
    have a separate pool for each DBMS user, which may contain as many or few
    connections as you want. Some applications has a pool for the accounting
    applications, and another for the sales applications etc. Some do have a
    separate pool for john, jane, joe etc, each with one connection. Pools
    can be created and destroyed dynamically using the dynamic pool API.
    Joe
    softstar wrote:
    >
    Hi all,
    I need to know how to set Multi User Environment in the weblogic 5.1
    properties file..
    Here my question is..:)
    1) I have a database with multiple users and having different privileges
    for the users.. and i need to use all the privileges when user aceess
    the database through weblogic server connectionPool.
    2)According to the user privileges i need access the database tables
    content and gives the frontEnd(jsp).
    3)How to modify dynamically weblogic.properties file in the weblogic
    5.1.
    If anybody having idea reg. this issues pl...help me..
    Thanks in advance
    Chandu([email protected],[email protected])

  • I purchased the Brookstone DLP projector for the iPhone, and all the reviews state the iPhone 4S can be mirrored with it. However, I can't not figure out how to do so. Is there a setting to change? Can't figure it out! ARGGG!

    I purchased the Brookstone DLP projector for the iPhone, and all the reviews state the iPhone 4S can be mirrored with it. However, I can't not figure out how to do so. Is there a setting to change? Can't figure it out! ARGGG!
    It will show pictures and videos if I choose, Start Slideshow, but it won't show anything else, no apps, etc.
    Here's a few examples of the reviews which state it mirrors:
    http://www.bgr.com/2011/11/07/brookstone-pocket-projector-for-iphone-4-and-4s-re view/
    http://www.gadgetaddict.info/brookstone-pocket-projector-for-iphone-4-and-4s-rev iew/
    I bought this for video analysis presentations with an app on the phone, so this is a key feature for me.
    Any help is appreciated.
    Jim

    I also have not figured out how to mirrow either.  I ask you both, is the sound via the projector louder than the phone itself when projector is tuerned off?  No matter what I do the max vilume through the projector speakers is lower that the phone itself even with phone remaining installed in projector.  I am think of taking it back to try another one.
    Keith

  • TS3297 I downloaded a song but it did not download properly and only the first 5 seconds of the song plays.  How do you fix this and get the entire song downloaded?

    I purchased a song and when downloading there was an error.  No error on the other 8 songs just one and now only plays the first 5 seconds of the song.  How do you fix this and do the download again so the entire song is downloaded?  Thanks!

    Delete the song from your library and re-download it from the Purchases section of the iTunes Store.
    http://support.apple.com/kb/PH12491

  • Play a song from itunes? it will show the art work then skip three or four songs and start playing! How can I get it to play the songs I touch? This is a new phone but has been restored from backup. Not even all my icloud music is showing

    play a song from itunes? it will show the art work then skip three or four songs and start playing! How can I get it to play the songs I touch? This is a new phone but has been restored from backup. Not even all my icloud music is showing

    Hi amorg1876,
    If your iPhone is skipping over certain songs, you may want to check out this article:
    Troubleshooting songs that skip
    http://support.apple.com/kb/TS3217
    Cheers!
    - Ari

Maybe you are looking for

  • ASA 5505 not connecting to the internet

    My ASA 5505 9.1 previously worked but I recently swapped out my modem (different issue).  The new modem is bridged so my ASA gets an IP address from the ISP. Internet ------ SB6141 modem ---------- ASA ---------- rest of network (direct connection or

  • Brand New Internal Hard Drive with "disk0s2: I/O error" (iMac 2007/10.6.8)

    Hello, I have a 2007 iMac 21" Aluminum running 10.6.8 with 4GB RAM. Two years ago I had a 2TB Western Digital drive installed, which ran fine until about two weeks ago. The performance of my iMac went down hill fast. At first I didn't suspect the dri

  • Use TV as 2nd screen thru apple TV

    Hi, I just bought a apple TV, and I want to use it not only to share photos etc.. but also as a real 2nd screen: i.e. just as my powerbook screen, is that possible? cheers and thank you for any info T

  • Hi I am Trying to Develope an Operating System  in Java

    hi i am developing a OS with the Help of Java any body can tell me about from Where i can get the Kernel(Free) to Embbed with my OS any Site or Suggestion thanks

  • Error in dynamic ref cursor

    hi i tried the following but getting the error.. Could you help me in this please SQL> create or replace package curpack as   2    type T_CUR is ref cursor;   3    procedure CHECKDYNREF (io_cur out T_CUR);   4  end curpack;   5  / Package created. SQ