How to set the same General settings for all users

Hi Experts,
How can i set the same general settings for all users e.g. marking the checkbox "Display header" to true for all users? General settings are possible under User Settings Button.
Regards,
Arti.

Hi Arti!
You can default user settings in a PFCG role, in the "personalization" tab.
If you have a PFCG role that is common to all your users, you can set the default values here.
However it does not prevent them to change these settings later, except if you modify the "user settings" fields properties in cProjects application.
Matthias

Similar Messages

How do I set the about:config settings for all users? iprism keeps prompting from authentication for users.

When users log on and try to open Firefox 23.0.1, users are prompted with Iprism Authentication. We made changes to the firefox about:config values "network.automatic-ntlm-auth.allow.-non-fqdn" and "Network.negotiate-auth.allow-non-fqdn" to true and it works, but only works on a per user basis. How can we set this up for all users?

I would think the about:config entries discussed are ex-factory set to values each user has to change individually, after the installation has run its course. The solution could be to have patched files ready to install post factum:
[https://developer.mozilla.org/en-US/docs/Mozilla/Preferences/A_brief_guide_to_Mozilla_preferences A Brief Guide to Mozilla Preferences - MDN]

How to use the same POWL query for multiple users

Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
Sandhya

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

How to set the default web site for WGM users

Hi,
In Tiger server there was a place to input the URL of the default web page for all browsers when users logged into network home folders. This was really helpful and saved a bunch of bandwidth and class time. Is there any way to do this in Leopard server? If so, please point me in the right direction.
Thanks,
..Tom

Antonio, Thanks! That seems to have worked for Safari. However, we like Firefox too, and I tried to set that up the same way, but was told "can't find a manifest for that app". I wonder if I can copy the Safari list then alter and rename it?
...Tom

How to have the same adjustment settings for each photo?

Hi all,
Can anyone shed any light on this? When I click on a photo and I want to sharpen, noise reduce etc, I have to select these parameters to appear, I do the adjustments and then click on the next photo....
Now, I want to do DIFFERENT adjustments BUT use sharpen, noise reduction again, and it does not remember this, so I have to select these again... very annoying.
So, can I make sure that the same adjustment panels appear each and every time I click on the photo?? Hope this is clear!!
Many thanks!
Jon

try this tip ...
http://discussions.apple.com/thread.jspa?threadID=674833&tstart=0
but be warned that there is an issue with monochrome mixer and this ...
http://discussions.apple.com/thread.jspa?threadID=674833&tstart=0

How do I set the default audio output for all users

Here's the story. I have a Mac Pro in a classroom that is connected to the audio system via the digital (Toslink) output. The systems are bound to AD and OD with some minor management being performed via MCX (printers, login, etc...)
When a new user authenticates to the system the output defaults to the internal speakers not the Digital Out.
My assumption was that I could configure default 0 key in the com.apple.audio.SystemSettings.plist to AppleHDAEngineOutput:1B,0,1,4:2, which is the digital output.
However it seems that new users are still generated with the Internal Speakers which is AppleHDAEngineOutput:1B,0,1,2:0.
Is there somewhere else that I can configure that default such that all users will default to the Digital Out, AppleHDAEngineOutput:1B,0,1,4:2? Or am I perhaps not configuring the SystemSettings plist correctly?
Most of these tasks were previously taken care of by another technician but he has left and I'm quickly trying to pickup the slack for configuration of our Macintosh environment.
Thanks,
-alex-

Best answer I could find: [https://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/#comment-132668]
If you can figure out how to add the printer name, this can be used to lock the margins.

How to Set-CasMailbox -ActiveSyncAllowedDeviceIDs (To Allow for all user devices, where I don't know what devices the user has)

I need to change this for all of our users and have created this script so far. Does anyone know how to Allow for all devices?
$mailboxes = Get-casMailbox -Filter {hasactivesyncdevicepartnership -eq $true -and -not displayname -like "CAS_{*"} | Get-Mailbox
foreach ($mailbox in $mailboxes)
#write-output $mailbox.UserPrincipalName
$devices = Get-MobileDevice -Mailbox $mailbox.UserPrincipalName
foreach ($device in $devices){
#write-output $device.deviceid
Set-CASMailbox -identity $mailbox.UserPrincipalName -ActiveSyncAllowedDeviceIDs @{Add=$device}
write-output $mailbox.UserPrincipalName
write-output $device.deviceid

For Exchange issues post in Exchange. You should also just try searching.
http://social.technet.microsoft.com/Forums/exchange/en-US/1ddc526d-f147-444c-a7bb-39d14415f9bc/clear-activesyncalloweddeviceids
This was first on list.
¯\_(ツ)_/¯

How to disable the annoying security warning for all users in Windows Server 2008 R2

Hi,
The employees from the administration complain all the time about the different types of security warning that they get when trying to run some applications which are used frequently.
Since the number of the users is too big it is unfeasible to go through all the users and disable the User Access Control at their account settings.
Is it possible to achieve this through given account policy settings. I want to perform the changes on the server so it applies to *all* (or maybe those of Administration department) users.
One useful information here can be the following: we use 2 different severs, the application which cause the errors are in the terminal server, and the users are in the main server. Where should I perform the changes?
Best,
D

Hiya,
It could sound like that one indeed. There are a few options to go for, however it should be fairly easy to find out :)
Create a test GPO and apply to a limited amount of users. GPUpdate and verify that the GPO has been applied using rsop.msc
Then open the application to test and see if it has the desired effect. You might need to change more than one setting, depending on the application and desired behavior.

How can I install and activate extensions for all users

Hi, within the version 7.0.1 I am able to install noscript extension for example for all users.
With version 8.0 the extensions are disabled by default, so I do not install it on company computers.
How can I manage extensions and settings for all users in 9.0?
Best regards
Jens

Hi John,
I appreciate your prompt response.
We have an Australian client here in the Philippines and would want to purchase an adobe software under Creative Cloud Licensing.
Since this type of licensing is not yet available here in the Philippines, they are suggesting that they can purchase it in their country.
My main concern is, will there be any conflict upon installing/activating an adobe software under Creative Cloud which will be purchased from their country?
And what are the steps for installing and activating a software under this type of license.

How to set the default settment rule for the same kind project.

hi experts:
the project of the same kind of the project profile have the same settment rule to one account (G/L).
how to set the default settment rule for the project of this kind of the project profile.
regards

Hi,
You need to define the settlement profile and allocation structure.
next you need to define the Strategy for settlement rule.
navigation-PS> costs> automatic and periodic allocations> settlement> Settlement rule for WBS
--> Define strategy for settlement rule.
Select the strategy and click on settings. in that new entries, check the Acc Assg element, enter Settlement profile and mention accass category as reposnsible cost center.
Save this transaction.
Now create a project assgin responsible costcenter for the WBS element in the project buider and save the transaction.
Now run CJB2 transaction for the project, settlement rule will generated automatically.
even you can configure the same for profitability segment.
Rgds
Sudhir Reddy

How to set the same in mozilla? : 1. Go to Tools(Internet Browser)- Internet Options- Security

''locking this thread as duplicate, please continue at [https://support.mozilla.org/questions/1002512]''
We are using a tool called BMC and we are unable to run reports. In IE the settings 1. Go to Tools(Internet Browser)->Internet Options->Security
2. Select the Security tab
3. Click on the Internet zone icon at the top of the tab page
4. Click the Custom Level button
5. In the Miscellaneous section change Display mixed content to Enable
6. Repeat steps 1 – 5 for the Local intranet and Trusted sites zones
solved the issue, could u suggest how to set the same in Firefox pls?
Thank you!

''locking this thread as duplicate, please continue at [https://support.mozilla.org/questions/1002512]''
We are using a tool called BMC and we are unable to run reports. In IE the settings 1. Go to Tools(Internet Browser)->Internet Options->Security
2. Select the Security tab
3. Click on the Internet zone icon at the top of the tab page
4. Click the Custom Level button
5. In the Miscellaneous section change Display mixed content to Enable
6. Repeat steps 1 – 5 for the Local intranet and Trusted sites zones
solved the issue, could u suggest how to set the same in Firefox pls?
Thank you!

I have 3 apple devices and I use the same apple ID for all 3. I would like to create a new I'd for one of my devices, but do not want to loose the apps on that device. Anyone know how I can do this?

I have 3 apple devices and I use the same apple ID for all 3. I would like to create a new I'd for one of my devices, but do not want to loose the apps on that device. Anyone know how I can do this?

Create a new ID:
On the iPod go to
- Settings>Messages>Send and receive and sign out your ID and sign into the other one. Make sure that only her ID email address is listed.
- Settings>FaceTime sign out of your ID and sign into the other one. Make sure that under You can be reached at only the newID email address is listed
- Settings>iCloud and sign out and sign in with the new one
- Settings>iTunes and App Store and sign out your ID and sign in with the new one.
- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.

HT1660 how can I use one single library for all users on the same laptop?

how can I use one single library for all users on the same laptop?

You are most of the way there. Each user having access to hard drive is the key. If users are limited in file privileges this is harder.
Any files you add to your library and any files she adds to her library are available to the other. Just not automatically. Each user must add the files to their own library using the add file or add folder option from menu bar.
What I have done is set library location to a location outside of My Documents\My Music. On my network storage I have a folder names s:\itunes. Both accounts iTunes are set to use this location for the library.

HT201269 How can I set up same back up for all my apple devices

How can I set up same back up for all my apple devices
I use online tools all from apple devices 2 iPhone 5g & 5s & iPad mini
I want same back up for all devices
Specially I use appointments app
I don't want to loose any appointment
So can I use same backup for I devices
Please help !,,,,,

You can also just use the same restore backup for all your devices you will get the same notifications BUT you have to click on Sync over wifi so it can work if not they will only work when you sync them when you sync on computer

My macbook pro's screen constantly goes dim. I have set the energy saver settings for battery to 7 mins but it goes dim if the period of inactivity is less than 7 mins. Please help. MBP 13" OSX 10.6.8 (2011)

My macbook pro's screen constantly goes dim. I have set the energy saver settings for battery to 7 mins but it goes dim even if the period of inactivity is less than 7 mins. Please help. MBP 13" OSX 10.6.8 (2011)

Doesn't sound like it. It sounds like you're being logged-off.
Does your Mac go through the complete Restart cycle -- black screen, gray and/or blue screen momentarily, startup chime, etc?
If you're not sure, do a Restart just to watch the process; the next time the problem occurs, see if it's the same.
You need to know which it is, as these will have very different causes, and different places to look for a solution.

How to set the same General settings for all users

Similar Messages

Maybe you are looking for