How to set the same in mozilla? : 1. Go to Tools(Internet Browser)- Internet Options- Security

''locking this thread as duplicate, please continue at [https://support.mozilla.org/questions/1002512]''
We are using a tool called BMC and we are unable to run reports. In IE the settings 1. Go to Tools(Internet Browser)->Internet Options->Security
2. Select the Security tab
3. Click on the Internet zone icon at the top of the tab page
4. Click the Custom Level button
5. In the Miscellaneous section change Display mixed content to Enable
6. Repeat steps 1 – 5 for the Local intranet and Trusted sites zones
solved the issue, could u suggest how to set the same in Firefox pls?
Thank you!

Similar Messages

How to set the same General settings for all users

Hi Experts,
How can i set the same general settings for all users e.g. marking the checkbox "Display header" to true for all users? General settings are possible under User Settings Button.
Regards,
Arti.

Hi Arti!
You can default user settings in a PFCG role, in the "personalization" tab.
If you have a PFCG role that is common to all your users, you can set the default values here.
However it does not prevent them to change these settings later, except if you modify the "user settings" fields properties in cProjects application.
Matthias

How to enable root on mac on 10.9.2 and how to set the password for the same ?

how to enable root on mac on 10.9.2 and how to set the password for the same ?

http://support.apple.com/kb/ht1528
Follow the steps for Lion.
But, why are you doing this? I've never found the need to do that.

TS2755 How do get my mail on my ipad 3 to set the same email rules as is on my imac ???

How do get my mail on my ipad 3 to set the same email rules as is on my imac ???

Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
 Cheers, Tom

How to set the default settment rule for the same kind project.

hi experts:
the project of the same kind of the project profile have the same settment rule to one account (G/L).
how to set the default settment rule for the project of this kind of the project profile.
regards

Hi,
You need to define the settlement profile and allocation structure.
next you need to define the Strategy for settlement rule.
navigation-PS> costs> automatic and periodic allocations> settlement> Settlement rule for WBS
--> Define strategy for settlement rule.
Select the strategy and click on settings. in that new entries, check the Acc Assg element, enter Settlement profile and mention accass category as reposnsible cost center.
Save this transaction.
Now create a project assgin responsible costcenter for the WBS element in the project buider and save the transaction.
Now run CJB2 transaction for the project, settlement rule will generated automatically.
even you can configure the same for profitability segment.
Rgds
Sudhir Reddy

How to set the table input in Query template?

Hi all.
I need to call a Bapi_objcl_change, with import parameter and a table as an input. I have done this, in BLS. I have set the table input in the
form of xml. In BLS, I get the output(the value gets change in SAP R3, what i have given in BLS). But if i set the same xml structure in
query template, I didn't get the output. Table input parameter does not take that xml source. How to set the table input in Query template?
can anyone help me?
Regards,
Hemalatha

Hema,
You probably need to XML encode the data so that it will pass properly and then xmldecode() it to set the BAPI input value.
Sam

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

How to Use the same iview for both KM End User and the KM Administrator

Hi friends,
*This is my scenario :* How to Use the same iview for both KM End User and the KM Administrator but with different Context
Menu Options.
i followed these steps but im getting same context menu for both KM End User and the KM Administrator .
Assign the role Content Administrator to the user km_admin. This is needed so that km_admin can change
the presentation settings for the KM Folder u201EReports_kmFolder‟.
Now, login with user km_admin. Navigate to the Km Folder reports_kmFolder through Content Administration
-> Km Content. Click on Details link of the folder reports_kmFolder.
Go To Settings -> Presentation. Click on the tab u201ESettings for You‟-> Click on button u201ESelect Profile‟.
Select the radio button corresponding to u201Elayout Set‟, and choose u201EConsumerExplorer‟ from the dropdown.
Click u201EOK‟.
Select both the check boxes corresponding to Items Affected as shown above, and click u201ESave‟
Now, remove the u201ESuper Administrator‟ role from the user km_admin and login with this user.
How rto resolve this????
Regards,
Prasad.

Hello Prasad,
Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
Regards,
Lorcan.

How to retain the same resolution while croping a tiff image using jai api

Hi all,
I have designed a program to crop a tiff image.But after croping the tiff,the resultant file resolution is not the same as the original source file.
In the program,the source file Nadeshiko_v1_02.tif has the resolution(X) of 1200 DPI and resolution(Y) has 1200 DPI pixels.
But after croping the resolution of output file is 100 DPI.
Please give me some idea on how to retain the same resolution.
<code>
package jai;
import java.awt.Frame;
import java.awt.image.RenderedImage;
import java.awt.image.renderable.ParameterBlock;
import java.awt.image.renderable.RenderableImage;
import java.io.FileNotFoundException;
import java.io.FileOutputStream;
import java.io.IOException;
import javax.imageio.*;
import javax.imageio.stream.ImageOutputStream;
import javax.media.jai.Interpolation;
import javax.media.*;
import javax.media.jai.JAI;
import javax.media.jai.PlanarImage;
import javax.media.jai.RenderedOp;
import javax.media.jai.widget.ScrollingImagePanel;
import com.sun.media.jai.codec.FileSeekableStream;
import com.sun.media.jai.codec.SeekableStream;
import com.sun.media.jai.codec.TIFFEncodeParam;
import javax.media.jai.OperationDescriptorImpl;
import java.io.*;
import java.util.Iterator;
import javax.media.jai.operator.*;
// import javax.media.jai.widget.ScrollingImagePanel;
public class crop {
 /** The main method. */
public static void main(String[] args) {
/* Validate input. */
/* if (args.length != 1) {
System.out.println("Usage: java JAISampleProgram " +
"input_image_filename");
// System.exit(-1);
float a=(float) 70.3;
float b=(float) 70.4;
float c=(float) 3100.3;
float d=(float) 5522.4;
* Create an input stream from the specified file name
* to be used with the file decoding operator.
String TIFF="TIFF";
FileSeekableStream stream = null;
try {
 stream = new FileSeekableStream("D:\\tif images\\Nadeshiko_v1_02.tif");
// stream = new FileSeekableStream("D:\\tif images\\Nadeshiko_v1_01.jpg");
} catch (IOException e) {
e.printStackTrace();
System.exit(0);
// Load the source image from a Stream.
RenderedImage im = JAI.create("stream", stream);
RenderedImage image2= CropDescriptor.create(im, a, b, c, d, null);
ScrollingImagePanel panel = new ScrollingImagePanel(image2, 100, 100);
// Create a frame to contain the panel.
Frame window = new Frame("JAI Image Cropping");
window.add(panel);
window.pack();
// window.show();
// Define the source and destination file names.
// String inputFile = "D:\\tif images\\Nadeshiko_v1_05.tif";
String outputFile = "D:\\tif images\\Nadeshiko_v1_04.tif";
// Save the image on a file. We cannot just store it, we must set the image encoding parameters
// to ensure that it will be stored as a tiled image.
TIFFEncodeParam tep = new TIFFEncodeParam();
tep.setWriteTiled(true);
tep.setTileSize(80,80);
JAI.create("filestore",image2,outputFile,"TIFF",null);
try {
 stream.close();
 } catch (IOException e) {
 // TODO Auto-generated catch block
 e.printStackTrace();
</code>
Thanks,
Sanat Meher

Try the following,
TIFFEncodeParam tep = new TIFFEncodeParam();
// Create {X,Y}Resolution fields.
TIFFField fieldXRes = new TIFFField(0x11A, TIFFField.TIFF_RATIONAL,
 1, new long[][] {{DPI_X, 1}});
TIFFField fieldYRes = new TIFFField(0x11B, TIFFField.TIFF_RATIONAL,
 1, new long[][] {{DPI_Y, 1}});
tep.setExtraFields(new TIFFField[] {fieldXRes, fieldYRes});

How to set the report path in a model plugin

I am trying to figure out how to set the report path in a process model plug-in. I can seem to figure out how to get access to it. It seems like this would be a reasonable thing to do since the plug-ins are for results processing. Does anyone know how to do this? We typically use the Sequential process model but I am trying to keep my plug-in as independent of that as possible.
Thanks.
Solved!
Go to Solution.

If I understand, you want your plug-in, when enabled, to alter the settings of any other instances of the NI report plug-in such that their reports share the same directory as your plug-in is configured to use.
If so, your plug-in can access and modify the settings of all other plug-in instances. All instances are passed to all plug-in entries point in the plugins array sub-property of the ModelConfiguration parameter. You can iterate through this array. Any element of the array with a Base.SequenceFilename equal to "NI_ReportGenerator.seq" is an instance of the NI report plug-in. Its report options are stored in the element under PluginSpecific.Options.
You can change the report options to what ever you want. Note that the ReportOptions model callback is called from the Initialize model-plugin entry point, so you might want to ensure that your changes are applied after that, so they aren't overwritten. To do that, you could make your changes in the the Initialize entry point of your plug-in, and ensure that your plugin runs last. To make it run last, you could set the FileGlobals.ModelPluginComponentDescription.Default.Base.RunOrder in your plug-in file to a value greater than 0, such as 1.0 (see TestStand Help>>Fundamentals>>Process Model Architecture>>Process Model Plug-in Architecture>>Structure of Plug-in Sequence Files>>Model Plug-in Entry Points>>Order of Entry Point Execution at Run Time).

How to set the File Path to run a javascript using Plugin Code?

Hi All,
Im new to Indesign Plugin Development.Can any one help me out with my problem.
What i want to do is to run a javascript using Plugin Code.When i went through this forum i was able to find out that i should use the IscriptRunner Class to automate this.I could also figure out that the Member Function to use is "CanHandleFile" &"RunFile".
The first parameter in CanHandleFile & RunFile Member Function is to specify the path of the JavaScript File i suppose!I could also find out that IDFile has to used to set the file path Information.
But im clueless how to set the Javascript FilePath using IDFile.Can any one help me how to do this?Any Code Snippets Please?
Waiting for reply.
Thanks
myRiaz

Hi, Andreas Can you explain this in detail? I found it in your post before. The content of elements are returned through the Characters callback function: From ISaxContentHandler.h: /** Receives character data The parser will call this method to report each chunk of character data. SAX parsers may return all contiguous character data in a single chunk, or they may split it into several chunks. But all characters in any single event must come from the same external entity so the Locator provides useful information. Note some parsers will report whitespace using the IgnorableWhitespace() method rather than this one (validating parsers must do so). @param Chars The characters from the XML document. */ virtual void Characters(const PMString& chars) = 0; What i have done is implement my own SAXContentHandlerServiceBoss, and in my file XXXSAXContentHandler.cpp, I override the fonctions StartElement, EndElement, and Characters() like below: I add the PMString xmlData to collect the file content: class XXXSAXContentHandler : public CSAXContentHandler { void XXXSAXContentHandler::Characters(const WideString& chars) { xmlData.Append(chars); } void XXXSAXContentHandler::StartElement(const WideString& uri, const WideString& localname, const WideString& qname, ISAXAttributes* attrs) { xmlData.Append("<"); xmlData.Append(localname); xmlData.Append(">"); } void XXXSAXContentHandler::EndElement(const WideString& uri, const WideString& localname, const WideString& qname) { xmlData.Append("</"); xmlData.Append(localname); xmlData.Append(">"); } } and in my program, I use the code below to call the fonction I overrided, but I dont know how I can get the String xmlData I defined in the XXXSAXContentHandler.cpp InterfacePtr<IK2ServiceRegistry> serviceRegistry(gSession, UseDefaultIID()); InterfacePtr<IK2ServiceProvider> xmlProvider(serviceRegistry->QueryServiceProviderByClassID(kXMLParserService, kXMLParserServiceBoss)); InterfacePtr<ISAXServices> saxServices(xmlProvider, UseDefaultIID()); InterfacePtr<ISAXContentHandler> saxHandler(::CreateObject2<ISAXContentHandler>(kXXXSAXContentHandlerServiceBoss)); saxHandler->Register(saxServices); bool16 parseFailed = saxServices->ParseStream(readStream, saxHandler); Can you give me any help? Thanks and regards!

Hi, I am using Indesign CS6, How to set the page size in Inches.

Hi, I am using Indesign CS6, How to set the page size in Inches.

All fields in InDesign can be entered in any measurement system. So, if you want to make an 8"x10" document and go to File>New Document and the window looks like this:
…you can type either 8 in or 8" into the Width field like this:
…and when you move to the next field, it will convert the eight inches into the equivalent number in the unit of measure that it is using at the moment, like this:
… (203.2 milimeters is the same as 8 inches). You can also enter a different measurement unit into other fields once the file is created, such as the width or height of a frame, or the position of an object in the X and Y coordinates.
If you would rather just work in inches instead of having to type the inches mark or abbreviation, go to InDesign>Preferences>General and select the Units & Increments tab. There you will see Ruler Units for Horizontal and Vertical at the top of the window. Set them to Inches and all of the fields will display in inches. If you do that to an open document, you will change the unit of measure for that document. If you do it while no documents are open, it will change the unit of measure for any new documents you create. To change the unit of measure for existing documents, you will have to open each and make the change.

Sending image sequence job to compressor in command line : how to set the framerate?

Hello,
In Compressor, when you import a image sequence, it's possible to set the framerate and add an audio file before choosing a preset and lauching the encoding task.
I want to dlo the same thing with command line. I know how to send a compressor job with command line, but no how to add theses settings.
In the compressor command line help, we've got this :
Job Info: Used when submitting individual source files. Following parameters are repeated to enter multiple job targets in a batch
 -jobpath <url> -- url to source file.
 -- In case of Image Sequence, URL should be a file URL pointing to directory with image sequence.
 -- Additional parameters may be specified to set frameRate (e.g. frameRate=29.97) and audio file (e.g. audio=/usr/me/myaudiofile.mov).
So there are also framerate and audio parameters in command line but i've no idea how to write the command line with theses parameters
Here is an example of command line for Compressor (by Apple) :
./Compressor ‑clusterid tcp://127.0.0.1:51737 ‑batchname myBatch ‑jobpath /Volumes/Source/ShortClips/NTSC24p.mov ‑settingpath /Users/stomper10/Library/Application\ Support/Compressor/PhotoJPEG.setting ‑destinationpath /Users/machinename/Movies/myDestinationFilename.mov.
Thank you for your help!

You can see in the command sh running-config command
show running-config : Displays the current access point operating configuration
Use the guest-mode SSID configuration mode command to configure the radio interface (for the specified SSID) to support guest mode. Use the no form of the command to disable the guest mode.
[no] guest-mode .
Here is the guideline for usage
The access point can have one guest-mode SSID or none at all. The guest-mode SSID is used in beacon frames and response frames to probe requests that specify the empty or wildcard SSID. If no guest-mode SSID exists, the beacon contains no SSID and probe requests with the wildcard SSID are ignored. Disabling the guest mode makes the networks slightly more secure. Enabling the guest mode helps clients that passively scan (do not transmit) associate with the access point. It also allows clients configured without a SSID to associate.
Examples
This example shows how to set the wireless LAN for the specified SSID into guest mode:
AP(config-if-ssid)# guest-mode
This example shows how to reset the guest-mode parameter to default values:
AP(config-if-ssid)# no guest-mode

How to set the timezone in a DATE datetype?

How to set the timezone in a DATE datetype?
Thanks
Maximus

10.5 Date, Time, and Timestamp
The JDBC API follows the Java platform's approach of representing dates and times as a millisecond value relative to January 1, 1970 00:00:00 GMT. Since most databases don't support the notion of a time zone, the JDBC 2.0 API adds new methods to allow a JDBC driver to get/set Date, Time, and Timestamp values for a particular time zone using a Calendar. For example,
ResultSet rs;
Date date1 = rs.getDate(1);
returns a Date object that wraps a millisecond value which denotes a particular date, like January 3, 1999, and a normalized time 00:00:00 in the default time zone. The time component of the Date is set to zero in the default time zone since SQL DATE values don't have a time component. Since a Calendar was not supplied explicitly to getDate() , the default time zone (really the default Calendar) is used by the JDBC driver internally to create the appropriate millisecond value assuming that the underlying database doesn't store time zone information.
The following example retrieves a date value in GMT-Greenwich Mean Time.
ResultSet rs;
TimeZone.setDefault(TimeZone.getTimeZone("GMT"));
Calendar cal = Calendar.getInstance();
Date date2 = rs.getDate(1, cal);
In the example above, a Calendar is passed explicitly to getDate() to inform the JDBC driver how to calculate the appropriate millisecond value. Note that the same result could have been achieved by simply changing the default time zone, and not passing the Calendar explicitly since the JDBC driver will use the default time zone by default.
Note that the two Date objects created above will not compare as equal assuming that the default time zone is not GMT, even if they represent the `same' date.
if (date1.equals(date2))
//never get here
This is because each Java language Date object really just wraps a normalized millisecond time value and these millisecond values will differ across time zones. If an application wishes to compare dates in different time zones it should first convert them to a Calendar.
An application should create a Date object using a Calendar. The application is responsible for specifying the time as 00:00:00 on the desired date when using the Calendar since JDBC uses this convention. In addition when creating a Time value the application must specify a date of January 1, 1970 to the Calendar used to create the millisecond value for the Time as this is the convention specified by JDBC for time.
Above from:
http://java.sun.com/products//jdk/1.2/docs/guide/jdbc/spec2/jdbc2.0.frame10.html
I hope it can help you!

How to set the extra component to horizontal scrollbar position

How to set the component to position of horizontal scrollbar , that position contain two component horizontal scrollbar and any component (JButton , JLabel ) like that.. Ms-Word scrollbar ,
Like that bellow fig.


{font:'Times New Roman'}{size:12pt}<img src="file:///C:/DOCUME~1/ADMINI~1/LOCALS~1/Temp/msohtml1/04/clip_image002.jpg" alt="" width="485" height="27" />{size}{font}
How to design ?

pradeep.rajadurai wrote:
I want set the JTable as a background of jframe or jinternalframe , how it is possible One way that may work, you can always extract the image from a rendered JTable and then paint the same image into the JPanel that holds your components via it's paintComponent method, then added the JPanel to the app's contentPane.
give me simple pgmIs English your second language? Because if so, please understand that this demand can be taken by some as rude.

How to set the same in mozilla? : 1. Go to Tools(Internet Browser)- Internet Options- Security

Similar Messages

Maybe you are looking for