How to set the settings

for such a file:
to get it out in the same size?
~Karl

Thank you all who racked their brains about it, (sich den Kopf zerbrachen),
and have nice Easter days,
Karl

Similar Messages

How do I set the settings back to default?

Inherited my photoshop from previous employee. How do I set the settings back to default like the keyboard shortcuts and anything else in the preferences? Would like to do this without reinstal as finding the original disc will probably be a hassle.
Thanks

you can reset the Photoshop preferences in the following way
Windows: Shift + Ctrl + Alt
Mac: Shift + Command + Option
Hold down the above keyboard combinations while starting photoshop.
You will be asked if you want to reset preferences -answer yes.
Cheers
John

How to set the "Auto detect proxy settings on N82"...

Hi folks,
I have a WLAN at the university which is secured of course and I need to under go a web authentication in order to connect to the network and i have done till then on my N82 and later i cannot browse.
To browse from the fireforx or explorer i need to set the settings to "Auto detect proxt settings" and IP auto... from Laptop.
I am not able to find such option on mobile ,, i need to give the proxy server name which is unknown to any one and mostly the university IT guys will not say to us
So can you suggest me some thing to overcome this problem .
Regards,
Surya

Hi
there's a location services checkbox in Safari-Preferences-Security
and one in System Preferences-Security-General
However, many websites look at the country location of the isp connection you're using, which is a different matter, & not in control of the user. Some sites allow choosing a personal language/location setting, stored in a cookie.

How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?

Dear SharePoint Developers,
Please help.
I need to know How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?
I think this is a "sealed column", whatever that is, which is shown in SPD 2013 as a column of content type "document, folder, MyCustomContentType".
I know when I set the column order in my custom Content Type settings page, it is correct.
But, when I load the NewDocSet.aspx page, the column order that I set in the settings page is NOT used for this "sealed column" which is bad.
Can you help?
Please advise.
Thanks.
Mark Kamoski
-- Mark Kamoski

Hi,
According to your post, my understanding is that you want to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx.
Per my knowledge, if you have Content Type management enabled for the list or library (if you see a list of content type with the option to add more), the display order of columns is set for each content type.
Drill down into one of them and you'll see the option under the list of columns for that content type.
To apply the column order in the NewDocSet.aspx page, you need to:
Select Site Settings, under Site Collection Administration, click Content type publishing. In the Refresh All Published
Content Types section, choose Refresh all published content types on next
update.
Run two timer jobs(Content Type Hub, Content Type Subscriber) in central admin(Central Administration--> Monitoring--> Review timer jobs).
More information:
http://sharepoint.stackexchange.com/questions/95028/content-types-not-refreshing-on-sp-online
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to set the report path in a model plugin

I am trying to figure out how to set the report path in a process model plug-in. I can seem to figure out how to get access to it. It seems like this would be a reasonable thing to do since the plug-ins are for results processing. Does anyone know how to do this? We typically use the Sequential process model but I am trying to keep my plug-in as independent of that as possible.
Thanks.
Solved!
Go to Solution.

If I understand, you want your plug-in, when enabled, to alter the settings of any other instances of the NI report plug-in such that their reports share the same directory as your plug-in is configured to use.
If so, your plug-in can access and modify the settings of all other plug-in instances. All instances are passed to all plug-in entries point in the plugins array sub-property of the ModelConfiguration parameter. You can iterate through this array. Any element of the array with a Base.SequenceFilename equal to "NI_ReportGenerator.seq" is an instance of the NI report plug-in. Its report options are stored in the element under PluginSpecific.Options.
You can change the report options to what ever you want. Note that the ReportOptions model callback is called from the Initialize model-plugin entry point, so you might want to ensure that your changes are applied after that, so they aren't overwritten. To do that, you could make your changes in the the Initialize entry point of your plug-in, and ensure that your plugin runs last. To make it run last, you could set the FileGlobals.ModelPluginComponentDescription.Default.Base.RunOrder in your plug-in file to a value greater than 0, such as 1.0 (see TestStand Help>>Fundamentals>>Process Model Architecture>>Process Model Plug-in Architecture>>Structure of Plug-in Sequence Files>>Model Plug-in Entry Points>>Order of Entry Point Execution at Run Time).

Sending image sequence job to compressor in command line : how to set the framerate?

Hello,
In Compressor, when you import a image sequence, it's possible to set the framerate and add an audio file before choosing a preset and lauching the encoding task.
I want to dlo the same thing with command line. I know how to send a compressor job with command line, but no how to add theses settings.
In the compressor command line help, we've got this :
Job Info: Used when submitting individual source files. Following parameters are repeated to enter multiple job targets in a batch
          -jobpath <url> -- url to source file.
                                           -- In case of Image Sequence, URL should be a file URL pointing to directory with image sequence.
                                           -- Additional parameters may be specified to set frameRate (e.g. frameRate=29.97) and audio file (e.g. audio=/usr/me/myaudiofile.mov).
So there are also framerate and audio parameters in command line but i've no idea how to write the command line with theses parameters
Here is an example of command line for Compressor (by Apple) :
./Compressor ‑clusterid tcp://127.0.0.1:51737 ‑batchname myBatch ‑jobpath /Volumes/Source/ShortClips/NTSC24p.mov ‑settingpath /Users/stomper10/Library/Application\ Support/Compressor/PhotoJPEG.setting ‑destinationpath /Users/machinename/Movies/myDestinationFilename.mov.
Thank you for your help!

You can see in the command sh running-config command
show running-config : Displays the current access point operating configuration
Use the guest-mode SSID configuration mode command to configure the radio interface (for the specified SSID) to support guest mode. Use the no form of the command to disable the guest mode.
[no] guest-mode .
Here is the guideline for usage
The access point can have one guest-mode SSID or none at all. The guest-mode SSID is used in beacon frames and response frames to probe requests that specify the empty or wildcard SSID. If no guest-mode SSID exists, the beacon contains no SSID and probe requests with the wildcard SSID are ignored. Disabling the guest mode makes the networks slightly more secure. Enabling the guest mode helps clients that passively scan (do not transmit) associate with the access point. It also allows clients configured without a SSID to associate.
Examples
This example shows how to set the wireless LAN for the specified SSID into guest mode:
AP(config-if-ssid)# guest-mode
This example shows how to reset the guest-mode parameter to default values:
AP(config-if-ssid)# no guest-mode

How to set the PATH in Terminal?

As a newbie to Bash and the Terminal, in connection with installing a new version of Ruby and various add-ons, I have been messing around with changing the PATH via various methods I've found on the internet, and trying to add a new directory to my PATH. Unfortunately, I cannot figure out how to set the PATH correctly. Here is what I understand so far:
1. Bash first looks to ".bash_profile" in the home directory for PATH settings.
2. If none, Bash then looks to ".bash_login" for PATH settings.
3. If none, Bash then looks to ".profile".
4. If none, Bash then looks to a system file in "/etc/profile" for default PATH settings.
5. For a new shell after login, Bash looks for a ".bashrc" file.
I cannot find any of the above files (I have Finder set to show hidden files already). Somehow, following some instructions from the internet without really knowing what I was doing over the past week I have set my PATH as follows:
/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/Users/*****/src:/usr/X11/bin
but I cannot find the file that is setting this PATH. I have tried creating a new ".bash_profile" shell file and putting it in various places such as "/bin" and "/usr/bin" but the file is not being read.
* As a temporary workaround I tried using the command "source .bash_profile" upon login to set the PATH using the .bash_profile file that I created, but it does not work.
* I am able to temporarily alter the path using the command "PATH=/usr/local/bin:$PATH" but this only lasts for an active shell; when I close out and reopen a new shell, it reverts to the default.
So my questions are:
Is it correct that there is a "/etc/profile" somewhere that is setting the default PATH? If so where is it? Should I alter it, or create a new ".bash_profile" somewhere to set the PATH? If not, where is my PATH being set? If I should create a new ".bash_profile", what exactly should go in it?
Thanks in advance for any assistance.

... I created a new ".bash_profile" file directly under my home directory and it worked like a charm. Below is the content of the file:
"PATH=/usr/local/bin:/bin/:/sbin/:/usr/bin/:/usr/sbin/:/Users/******/Ruby:/Users/*******/src:/Users/******/Java Programs/"
What are the "..."'s? Is that just you, or is the contents of the file actually inside of double quotes?
is there an 'export PATH' also in the file? As in
PATH=/usr/local/bin:/bin/:/sbin/:/usr/bin/:/usr/sbin/:/Users/******/Ruby:/Users/*******/src:/Users/******/Java Programs/
export PATH
And did you either restart your Terminal session so your .bash_profile was read, or issue a 'source .bash_profile' command to execute the .bash_profile after your change?
The only remaining problem is that from the home directory, I'm unable to directly run programs in the above-designated subdirectories (without first navigating to the subdirectory containing the file. Is there something wrong with the syntax or order of the directories I put in the path?
For example: there is a file called "newprogram.rb" in the "Ruby" directory listed above. I should be able to execute it from the home directory using "ruby newprogram.rb" but it does not work. The same command works fine from within the "Ruby" directory.
Does the 'ruby' command search PATH to find its scripts?
Have you read the "man ruby" man page to see if it talks about PATH?
A common Unix feature is that programs and scripts with the executable bit set, and are located in a PATH directory, will be run if you just type their names.
For example, if the first line of newprogram.rb script starts with
#!/usr/bin/ruby
and if the script is executable
chmod +x newprogram.rb
And if it is in a directory in PATH, then just typing
newprogram.rb
should run your perl script using /usr/bin/ruby. If you want to use a different version of Ruby, then change the #! line so it point to your version of Ruby. Or if your version of Ruby is found earlier in PATH then the /usr/bin/ruby, you can use
#!/usr/bin/env ruby
as your script's first line which will search PATH for 'ruby' and use the first one it finds.
Message was edited by: BobHarris

How to set the REPORTS_DEFAULT_DISPLAY

how to set the REPORTS_DEFAULT_DISPLAY

However, as I believe is expected, OS X (and Windows for that matter) will create files by default with character encoding of Cp1252 (Latin-1). That is, the FILE encoding in the file metadata - the Byte Order Mark I believe. The file itself, not the characters written to it.
Apps like TextEdit and Mail have settings that let you determine the encoding of text produced. The default would normally depend on the character content of the file, ranging from ASCII for basic English to Windows Latin-1 (Win 1252) or ISO Latin -1 (ISO 8859-1) to UTF-8 for other content.
Win 1252 is not ASCII, but has twice the number of characters in the latter.
Byte Order Mark is something totally different --it's a particular character used to signal certain encodings.
http://en.wikipedia.org/wiki/Byteordermark
As a simple example, just `touch somefile` from terminal creates a file in Cp1252 -- I'm obtaining that info by opening in jEdit by the way (anyone know of something better?).
For what Terminal does and how to change it, it might best to post in the Unix forum:
http://discussions.apple.com/forum.jspa?forumID=735
For problems with a FireFox plugin, it might be good to ask on their own forums as well.

How to set the view privilege of a portlet?

Dear all,
I would like to ask how to set the view privilege of a portlet (which is located on the Intranet homepage) to only a group of users?
As far as I know, I can create a tab with view privilege to address the about scenario. But is it possible to directly set the view privilege to the portlet ?
thanks
George (HK)
Welcome to my photo albums at http://community.webshots.com/user/GeorgeLee80
Message was edited by:
georgelkh

OK, you got me there George. I don't know where you can set view rights to an out of box portlet. So how about a different approach?
1) Create a blank page with no nav bar or anything else
2) Assign the group you want to see the notifications portlet view rights on the page
3) Make sure the show as portlet check box is checked on the Optional tab in the page properties
4) Add the notifications portlet to the page
5) Ensure the portlet settings are how you desire in terms of what notifications to show and the region settings are how they should be in terms of border, headers, etc
6) Edit the page where you want the notifications portlet to be shown and add the page portlet you just created instead of the notification portlet
This should achieve what you seek without having to dig into out-of-box portlets.
Rgds/Mark M.

How to set the default settment rule for the same kind project.

hi experts:
the project of the same kind of the project profile have the same settment rule to one account (G/L).
how to set the default settment rule for the project of this kind of the project profile.
regards

Hi,
You need to define the settlement profile and allocation structure.
next you need to define the Strategy for settlement rule.
navigation-PS> costs> automatic and periodic allocations> settlement> Settlement rule for WBS
--> Define strategy for settlement rule.
Select the strategy and click on settings. in that new entries, check the Acc Assg element, enter Settlement profile and mention accass category as reposnsible cost center.
Save this transaction.
Now create a project assgin responsible costcenter for the WBS element in the project buider and save the transaction.
Now run CJB2 transaction for the project, settlement rule will generated automatically.
even you can configure the same for profitability segment.
Rgds
Sudhir Reddy

How To Set The Nokia Music Player Media Equaliser?...

Hi, I am currently using nokia 6300 and I wish to know if anyone knew how to set the media equaliser settings to boost the music effect and sound quality. Plz help if you know, thank you...

14-Oct-2008 09:36 AM
icu44 wrote:
Hi, I am currently using nokia 6300 and I wish to know if anyone knew how to set the media equaliser settings to boost the music effect and sound quality. Plz help if you know, thank you...
Hi,
Go to Media> Equaliser and set your desired settings
You could also enable the stereo widening effect to widen sound effects.
=)

How to set the same in mozilla? : 1. Go to Tools(Internet Browser)- Internet Options- Security

''locking this thread as duplicate, please continue at [https://support.mozilla.org/questions/1002512]''
We are using a tool called BMC and we are unable to run reports. In IE the settings 1. Go to Tools(Internet Browser)->Internet Options->Security
2. Select the Security tab
3. Click on the Internet zone icon at the top of the tab page
4. Click the Custom Level button
5. In the Miscellaneous section change Display mixed content to Enable
6. Repeat steps 1 – 5 for the Local intranet and Trusted sites zones
solved the issue, could u suggest how to set the same in Firefox pls?
Thank you!

''locking this thread as duplicate, please continue at [https://support.mozilla.org/questions/1002512]''
We are using a tool called BMC and we are unable to run reports. In IE the settings 1. Go to Tools(Internet Browser)->Internet Options->Security
2. Select the Security tab
3. Click on the Internet zone icon at the top of the tab page
4. Click the Custom Level button
5. In the Miscellaneous section change Display mixed content to Enable
6. Repeat steps 1 – 5 for the Local intranet and Trusted sites zones
solved the issue, could u suggest how to set the same in Firefox pls?
Thank you!

How to set gprs settings in i phone 4

Dear Sir
How to set GPRS settings in i phone 4 pls send me the details
Thanks

See pages 11 and 135 of the iPhone User Manual:
iPhone User Guide (For iOS 6.1 Software)

How to set the Rman backup parameter.

Hi,
Can U guide me how to set the Rman backup path,control file auto backup & others parameter.

Hi,
Go through this,
Show all configurable settings:
RMAN>SHOW ALL;
Write disk backups to the /rmanback directory: (%U will be replaced with unique filenames)
RMAN> CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/rmanback/%U';
Backup using a flash recovery area rather than disk
RMAN> CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT CLEAR;
Configure RMAN to back up the control file after each backup
RMAN> CONFIGURE CONTROLFILE AUTOBACKUP ON;
By default, RMAN automatically names control file backups and stores them in the flashrecovery area.
To configure RMAN to write control file backups to the /backup directory:( %F will generate a unique filename)
RMAN> CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/backup/controlfile%F';
Ensure that RMAN retains all backups needed to recover the database to any point in time in the last 7 days:
RMAN> CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
Retain three backups of each datafile:
RMAN> CONFIGURE RETENTION POLICY TO REDUNDANCY 3;
Delete backups no longer required by the retention policy:
RMAN> DELETE OBSOLETE;
To override the configured retention policy for individual backups - use BACKUP.. KEEP (or CHANGE.. KEEP)
Configure backups to run in parallel by assigning two sbt channels:
RMAN> CONFIGURE DEVICE TYPE sbt PARALLELISM 2;
Reset any CONFIGURE setting to its default by running the command with the CLEAR option
RMAN> CONFIGURE CHANNEL DEVICE TYPE sbt CLEAR;
RMAN> CONFIGURE RETENTION POLICY CLEAR;
Regards,
oraclekt
Edited by: oraclekt on Sep 1, 2010 9:58 PM

Dose any one know how to set the MMS in the Belle?

Hi Nokia and all,
After updated to the Belle for my N8, the MMS a access point setting is missing. As I remember in Anna version, the MMS access point setting can be find in this way, menu -> Setting -> connectivity -> Settings -> Network destinations -> MMS. In there you can set the IP of the MMS etc.
Dose any one know how to set the MMS in the Belle, please let me know as soon as possible, thanks a lot!
Nokia N8
059D145
Solved!
Go to Solution.

@easydoweb
This resource has probably not been updated to take account of Belle http://www.nokia.com/gb-en/support/troubleshooting/?action=singleFAQ&caseid=FA134387_en_US but can't you get your network provider to resend "Settings" SMS?
Happy to have helped forum with a Support Ratio = 42.5

How to set the settings

Similar Messages

Maybe you are looking for