How to set the Time Zone for BPM 10 g participant.

Hi All,
One BPM 10g(version 10.3.2) application runs on windows server. There are some participants assigned to some role. How to view and adjust the time zone of any existing participant.
Please advise. It's urgent.
Thanks,
Anupam

It's been a long time, but if I remember correctly - in 10g a participant sets this by logging into the Workspace and clicking "Settings". Believe the time zone is something that the individual end user can select there.
Dan

Similar Messages

The time on my firefox browser is not correct. How do I set the time zone for Firefox? It is not the same as my mac computer setting?

I am using a hotmail acount with bigpond. The time that it says I sent an email is out by 11 hours... can you please tell me how to set my firefox browser to be at the right time? My mac is set at the right time zone...

I was able to do what you suggested, and the time listed in the code field was correct. However, when I sent a test email to myself on the bigpond site, it said it was received at 8:04am when it was actually 18:04. So there is an error of more than half a day. I have a snapshot of the screen if that is helpful. I asked Bigpond about this and they said it was a Firefox problem... Please advise.

How to set up time zone for Bid Invitation

Hi,
Our client is using Surrogate Biddding. Buyer send bid invitation in SRM and when he enter Quotation after recieving in SRM, System showing "Bid is already closed", thought it has time to close.
Where i have to maintain this time zones in SRM system for Bid Invitation.
Thanks
Ravi

Hello,
You can find the timezones of the BP's in the ADRC table, field TIME_ZONE. You can set the timezones in Tx STZBC.
Hope this helps.
Thanks
Ashutosh

How to update the time zone for Asuncion, Paraguay.

It recently changed (03/23/2014) from the daylight saving time to the normal and now the appointments are displayed in the wrong schedule.
Is there any update available to fix this?

Hi py-cjgaston,
Welcome to the Support Communities!
The article below may be able to help you with this. Click on the link to see more details and screenshots.
International settings - iPhone
http://help.apple.com/iphone/7/#/iph3dd6171a
Go to Settings > General > International to set the following:
The region format (date, time, and telephone number)
The calendar format
Also, confirm your date and time settings:
iOS: Troubleshooting issues with date and time
http://support.apple.com/kb/ts3920
Cheers,
- Judy

How to set the time interval for data obtain through labview via write measureme

I'm need to programme to obtain data from oscilloscope. Currently my laptop able to communicate with Agilent DSO6014A oscilloscope via USB. I'm include the write measurement in mty program and save the data in .lvm file. But the time interval in the data are too small which is in micron seconds. Is there a way to modify the interval values?

The attached file is the capture of my diagram. Thanks.
Attachments:
Capture.PNG ‏56 KB

Please help to set the time zone in a porper way

Dear Folks please help to set the time zone in a porper way
select sessiontimezone from dual;
Database: Oracle 11.2.0.2
Operating system: AIX 5.3
SESSIONTIMEZONE
+00:00
SQL> select systimestamp from dual;
SYSTIMESTAMP
06-NOV-12 04.21.07.438426 AM +00:00
SQL> select dbtimezone from dual;
DBTIME
+00:00
SQL> Select DBMS_SCHEDULER.get_sys_time_zone_name from dual;
GET_SYS_TIME_ZONE_NAME
Asia/Kuala_Lumpur
By looking Doc ID: Note:149120.1 in Metalink:
ALTER DATABASE <my db name> SET TIME_ZONE = 'Asia/Kuala_Lumpur'
or
ALTER DATABASE <my db name> SET TIME_ZONE = '+08:00'
For reflecting the change I refreshed the db by shutdown and restart.
but still the returning no timezone value for user schema, please help how to set the time zone in a proper way?

SQL> conn sys/sys as sysdba
Connected.
DBNAME
db
SQL> select u.name || '.' || o.name || '.' || c.name "Col TSLTZ"
2    from sys.obj$ o, sys.col$ c, sys.user$ u
3   where c.type# = 231
4     and o.obj# = c.obj#
5     and u.user# = o.owner#;
no rows selected
SQL> select DBTIMEZONE from dual;
DBTIME
+00:00
SQL> alter database set time_zone='Asia/Kuala_Lumpur';
Database altered.
SQL> select DBTIMEZONE from dual;
DBTIME
+00:00
SQL> startup force;
ORACLE instance started.
Total System Global Area 426852352 bytes
Fixed Size                  1375060 bytes
Variable Size             260048044 bytes
Database Buffers          159383552 bytes
Redo Buffers                6045696 bytes
Database mounted.
Database opened.
SQL> select DBTIMEZONE from dual;
DBTIMEZONE
Asia/Kuala_LumpurRefer:
Re: how to check db time zone
Edited by: Ora on 5 Nov, 2012 11:36 PM

How to set the time on a WRT160N

On the status page of the admin console, the current time is listed as 'Not Available'. I've looked through the web admin pages but cannot find the place to set the current time.
How do I set the time on a WRT160N?

Under the setup tab...You can select the Time Zone...Select the time zone for your location. If your location experiences daylight savings, leave the checkmark in the box next to "Automatically adjust clock for daylight saving changes" and click on save settings.

"I would like to know how to set the default view for the columns. Somewhere I read it could be done in by music icon under Library. Can't find it. Thanks

"I would like to know how to set the default view for the columns that are shown in iTunes. Every time I open it, I have to either go to the options, or right-click to get the pop-up options, and delete "rating" and add "composer." I'd really like to just do it once and be done with it." Somewhere I read you could do this by clicking on the Music icon under LIBRARY then arramge the columns. Trouble is, I can't find a Musi Folder or icon in my user library.
Any help would be appreiated. OSX 10.9.2 iTunes version 11.1.5 Thanks!!! CW!

From the iTunes menu bar try View>Show View Options. Make sure what you want to see is checked and what you don't is unchecked. You can do this (may need to do this) for any playlists, your main Library, etc.
Good luck
srb

How to set the Tme Zone of flash player

I received time in milli second of UTC time and timezone of
server. At client side, I need to display it at the server time
zone. How can I set the time zone info of Flash time zone?
Thanks!

Player 10 is not released although it has now be announced on
Adobe Labs:
http://labs.adobe.com/technologies/flashplayer10/
You can follow the instructions and test it out. If it
doesn't meet your requirements, please report that to the Player
team as per the instructions on that page.

How to set DST/time zone consistently?

I'm using several laptops and a desktop Mac (10.6 all) with Outlook 2011 to access a calendar on an Exchange 2010 server (SP1 I think). I see the following weird behavior. For some (not all) yearly calendar entries, like birthdays, which are set to be "whole day" (which then has the time grayed out as 12am), every once in a while they get automatically changed to last 2 days, and the grayed out times say "8pm to 8pm". I change it back (hit "edit series", and the dates are still grayed out, so I have to change Recurrence to "once only", change the date back to be just the 1 day, and then set it to repeat yearly, and click "all day event" off and back on for the 8pm to change to 12am), but some time later I look and it's back to lasting 2 days! Apparently this has to do with time zone and DST info being different on various clients. I posted on the Microsoft forum and was pointed to:
http://support.apple.com/kb/TS1638
So now I'm trying to set consistent Daylight Savings Time and Time Zone on my laptop, desktops, iPhone, and iPad. I think I'm missing something because it's still happening.
On my iPhone, in the Date&Time preferences, it says time zone is "New York"; in Calendar preferences, it says Time Zone Support is set to Boston. In Outlook, it says "UTC-05:00 Eastern Time US & Canada". Is this all correct? Where, on all these devices, do I set the time zone and DST so that it's all consistent?

Hi Neha,
The [TimeZoneAlias] section should have all the mobile device time zone in it. The spelling has to be exactly what is seen on the mobile device. The Mobile Device timezone transmits to the Agentry Server , it maps based on what the server understands, then transmit back to the Backend.
Eg:
[TimeZoneAlias]
Australian Eastern Standard Time=(UTC+10:00) Canberra, Melbourne, Sydney
India Standard Time = (GMT+05:30) Chennai, Kolkata, Mumbai, New Delhi"
Note: Agentry server while adjusting the timezone gets the list of timezones from Windows registry. It was found that some of the timezone settings may not be recognized by the Windows OS in the server. Please verify the same.
Modify your Agentry.ini to include the exact spelling of your mobile device time zone alias plus the corresponding equivalent as understood by the Agentry Server. I am also attaching the official KBA note tied to Time Zone Alias.
http://wiki.scn.sap.com/wiki/display/SAPMOB/Set+Up+Time+Zone+Alias+in+Agentry.ini+Configuration+File
https://support.wdf.sap.corp/sap/support/notes/1813025
Additional discussion (Thread): Syclo - Client Time Zone error message
Thanks
Resmi

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

How to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B

Hi Friends,
How to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B.
External Trading Partner is sending the EDI 856 via AS2 URL to our Oracle B2B Server.
In the inbound 856 agreement, we have checked the option of Funtional Ack and also Functiona Ack handled by B2B is yes.
We have the outbound agreement which is sending that Functional ack 997 (auto generated by oracle b2b) and we have specified the Outbound AS2 channel of the Partner.
997 doc is being sent to external partner using AS2 channel, but the filename is generating as '40101'.
Please can you let me know how to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B.
Appreciate your valuable answers!!
Thanks,
Amirineni

Amirineni,
AFAIK, there is no option to set the file name when the 997 is generated automatically by B2B.
Alternatively, if this is a must requirement, you can generate the FA from backend and send to B2B with MSG_TYPE =9. In this case, you can set the header with filename (How to set the actionname property in B2B 11g)

How to set the Default values for Info Objects in Data Selection of InfoPac

Hi All,
Flat file Extracion:
How to set the Default values for Info Objects in Data Selection Tab for Info Package
ex: Fiscal Year Variant Info Object having values 'K4' 'Y2' etc in Flat file
Initially default value(not constant) for this info Object value should be 'K4' in Info Package
If I set data selection value for this info object K4 it will retreive records with this selection only? how to handle
Rgds,
CV

Hi,
suppose as your ex. if you are having fiscalyear variant in the dataselection tab then specify K4 in the from column, again the ficalyearvariant row and click on insert duplicate row at the bottom . you will get another row . In that enter Y2 in the from column. now you can extract K4, y2 values .
haritha

Sun ONE Studio 4 aka Forte: How to set the output path for classes ?

Help !
Beginner's question:
Sun ONE Studio 4 aka Forte:
How to set the output path for classes ?
As default, the class files are created in the same directory as the
sources.
In opposite, both JBuilder and Together support that there is a tree
with the sources and another tree with the classes.
The first answer I got was "not possible with Forte, but just if you write your own "ANT Build script" !
a) Please point me to a ready-to-use ANT script for this purpose, if such is available
b) Is using ANT instead of the MAKE as comfortable ? Besides the separation of sourcecode and classes, I would like to keep everything else to be the same, i.e. I don�t want to edit the ANT file if I enlarge the project by directories or files.
Tia
Sincerely
Rolf

You can set S1S's options to place newly created .class files in a specific location.
Identify the compiler that is being used - Open the S1S's Tools/Options window, expand Editing and select Java Sources. Note the Default Compiler value. (If it's one if the Ant options, you use Ant to specify this option, not S1S.)
Open the S1S's Tools/Options window, expand Building/Compiler Types and select the appropriate compiler.
The Properties tab of the compiler has the property Target, which sets the filesystem where the compiler output is directed. If you choose <not set>, the .class files are written to their source directory.
When you set the Target, your change affects all classes that use this compiler.
Very few options can't be set in S1S; the challenge is finding out where they're set!

How to set the stack size for alchemy application?

Anybody know how to set the stack size for alchemy application?
If you know, please tell me how to adjust the stack size for alchemy application?

Hi,
The stack size is set as public const gstackSize in the alchemy generated code. You can see this if you build with ACHACKS_TMPS set. The default is one megabyte.
One way to change the stack size is to use llvm-dis to disassemble avm2-libc/lib/avm2-libc.l.bc, generating avm2-libc.l.ll, modify the constant, and then use llvm-as to recompile your modified library and overwrite the old one. These utilities should be in your path if alchemy is set up.

How to set the Time Zone for BPM 10 g participant.

Similar Messages

Maybe you are looking for