How to set the value of an radio button using set_radio_button_property

I'd like to set the value of an radio button dynamically, depending of the situation.
(=> the value which the object returns to the radio group)
Means: the 'radio button value' of my object 'rb_1' shall be 1, in other circumstances 99 and so on.
Is it possible to set this value at runtime ?

the problem is as Gerd wrote:
there are two or more radio buttons in an option group.
Their value depends on the text objext t_field.
If t_field is "car" the value of radio button 1 shall be 75, button 2: 90 and button 3 115.
if t_field is "bus" the value of radio button 1 shall be 250, button 2: 275 and button 3 300 and so on.
My problem is to set the value of the radio buttons at runtime after choosing/typing the value of the text field t_field.
Message was edited by:
PatrickM

Similar Messages

How to set the a graphic ( 3 radio buttons ) in the report ?

Hi Exports,
1. How to set the a graphic ( 3 radio buttons ) in the report ?
Acutely I want to fetch the record from MCHB-CLABS and MCHB-CSPEM , if the data read from MCHB-CLABS will show the green light otherwise if read from MCHB-CSPEM, it will show red light.
(e.g : if syntax error in report it is showing red light signal , like that how to set in report program)
Thanking you.
Subash

Hi,
In your internal table declaration, include yet another field for lights..
DATA: begin of itab,
           lights type light,
          end of itab.
DATA: GV_LAYOUT TYPE SLIS_LAYOUT_ALV.
GV_LAYOUT-LIGHTS_FIELDNAME = 'LIGHTS'.
Use the GV_LAYOUT in your FM to display the ALV.
IS_LAYOUT                         = GV_LAYOUT
If itab-lights = 1 => Error
itab-lights = 3 => Success
itab-lights =2 => Warning

How to set the value of process variables/payload using a managed bean?

Hello,
Someone can give me an example about how to set the values of a process payload in a managed bean?
thank you!

Try this:
jsf page:
<af:selectOneChoice label="Select Suburb"
requiredMessageDetail="Select a suburb"
valueChangeListener="#{selectOneChoiceBean.onValueChanged}"
validator="#{selectOneChoiceBean.validate}"
unselectedLabel="None" autoSubmit="true"
binding="#{selectOneChoiceBean.selectOneChoice}"
value="#{selectOneChoiceBean.value}">
<f:selectItems value="#{selectOneChoiceBean.selectionList}"/>
</af:selectOneChoice>
backing bean:
public class SelectChoiceBean {
private List<SelectItem> selectionList;
private String value = "B";
private RichSelectOneChoice selectOneChoice;
public SelectChoiceBean() {
initSelectionList();
public void setSelectionList(List<SelectItem> selectionList) {
this.selectionList = selectionList;
public List<SelectItem> getSelectionList() {
return selectionList;
public void onValueChanged(ValueChangeEvent valueChangeEvent) {
System.out.println(valueChangeEvent.getNewValue());
// Add event code here...
public void validate(FacesContext facesContext, UIComponent uIComponent,
Object object) {
// Add event code here...
private void initSelectionList() {
selectionList = new ArrayList<SelectItem>();
selectionList.add(new SelectItem("A", "A label"));
selectionList.add(new SelectItem("B", "B label"));
selectionList.add(new SelectItem("C", "C label"));
public void setValue(String value) {
this.value = value;
public String getValue() {
return value;
public void setSelectOneChoice(RichSelectOneChoice selectOneChoice) {
this.selectOneChoice = selectOneChoice;
public RichSelectOneChoice getSelectOneChoice() {
return selectOneChoice;
}

How to set the value of something in a component from the main application?

Hi,
Maybe I've been working on this too long, but I can't figure
out how to set the value of the text property of a text input field
in a component from my main application in an mx:Script block. I
have a component called Login in the components folder, and I need
to set the text value of empNum. In my mxml declaration at that the
top, I've declared these components as xmlns:c="components.*" So
logically, the property I'm trying to set is c.Login.empNum.text. I
can't figure out the correct syntax to get this to work, and I've
tried everything I can think of. Does anyone have any suggestions?
I'm thinking this should be an easy one, and I'm just missing
something.
Thanks!
Holli

Did you try giving it an id ?
<c:MyLogin id="loginScreen" /c>
So later you can do loginScreen .empNum.text = "my text"
Laurent,

How to set the value in SelectOneChoice

Hi,
I need an help....
can anyone please tell me how to set the value in SelectOneChoice.
I want to set the value at index 3
i am trying selectOneChoice1.setvalue(new Integer(3)); but it is throwing an NullPointerException.
Thanks,
Neha

Hi,
is it ADF bound? If so then you set the default value to the list binding in the PageDef file. The value of the component must be bound to a method expression, which is why you see an exception. However, I think we need more information
Frank

How to add the BexAnalyser as standard radio button to the add-ins?

HI All,
how to add the BexAnalyser as standard radio button to the add-ins.
Thanks
Vasu

What do you want to do? Pls give some more details.

How to change the "Address is Residential" radio button to default "off"

Hello, I am attempting to set the "Address is Residential" radio button under UPS shipping option to default "off". Our company sells mainly to business locations, and the button is causing confusion and incorrect shipping rates with our customers. Sorry if this has been covered before, I have seen a few discussions when googling the topic, however their links are not working.
Thanks!

Hi,
The option cannot be changed but a possible workaround to avoid client confusion is to hide this div, using some custom JavaScript script that will hide it after is rendered by the shipping option tag.
Unfortunately I do not have the exact script but will leave this topic open for the community to assist if possible.
Kind regards,
-Sidney

How to set the value of a variable in a cluster in LabVIEW from C#?

Hi guys, I'm working on a small c# program, which using the interface provided by LabVIEW. And I know that, using lv.SetControlValue(name, value) can set a variable just on the front panel. But in my case, there're several clusters on the front panel. So it confused me how to set the variables in these clusters. For example there's a cluster named clusterA, and a variable in it named valueA, I've tried something like this:
lv.SetControlValue("clusterA.valueA",1);
but it totally not work. Anyone has some experience about this stuff? Thanks a lot!!
Solved!
Go to Solution.

Hey guys, thanks a lot for all your reply. I just find a simply way to solve this porblem. For example, there a cluster named "ClusterA", and there are only two control values in it, which are: an int value named "IntA" (default value IntA = 10)and a string value named "StringA" (default value StringA = "abc"). In C# if you invoke the method:
var clusterA = (Array) vi.GetControlValue("ClusterA");
you will get an Array looks like: clusterA = {10, "abc"}; Then if you want to change IntA to 123, you just need to do:
clusterA.SetValue(123, 0); // 123 is the value, 0 is the index of IntA in the array clusterA, after this clusterA = {123, "abc"}
After this, you just need to give the array back to LabVIEW by using:
vi.SetControlValue("ClusterA", clusterA);
and now see the panel in you LabVIEW, the IntA is changed.

How to set the value for Power Cost in SCCM reports in Euro's?

Hello,
I have found out how to change the value of the 'cost' of the KWh for these reports (reporting) . But ther original settings where displayed and set in USD($) with some other values. I have of course changed the USD to EUR (€) in my case, but my question
is: how do i know what I have to fill in in the field : costOfKwh, according my manager for my organisation it is in euro's 5,9 euroct/Kwh
Do I have to fill in 5,9 or 0,59 or 0,059 ???
Then also ther are some other values set in the original reports, like :
KwhConsumptionDesktopComputerOn value = 0,07
KwhConsumptionLaptopComputerOn value = 0,02
KwhConsumptionDesktopMonitorOn value = 0,03
Do i have to leave this settings ?

Yes, I know this is an old post, I’m just trying to clean them up.
The default of 0.09 is 9 cents/ KwH so I’m assume that 5.9 cent (euro) so that you bet 0.059
BTW if you have edit the report to change $ to € then you can also set eh default value to whatever the current power cost is too.
http://www.enhansoft.com/

How to set the Value in Dropdownbyindex

Hi Experts,
I am New to Webdynpro-ABAP.
I have one Dropdownbyindex field. I need to set the value from BAPI. how to set that values in Dropdown..
I need Basic step-by-step procedure.
Regards,
P.Manivannan

Hi,
1. First import the BAPI in to WD component using create->service call.
2.The BAPI import, export and Table parameters will be set in to the Component Controller context.Then drag this BAPI node to your view.
3.In the 'texts' property of DDbyindex bind the BAPI output node which will be the Table parameter of the BAPI.It could be under CHANGING node.
4.In WDDOINIT method just click the code wizard and enter the method name which you will give when importing the BAPI.Automatically the values from the BAPI will be loaded into your Dropdown when you run the application.
Regards,
Dinesh

How to set the value in the xml node.

Hi
I am having the application PDF which can be submitted by user using the button. while submitting
i am using below code to set the value in the xml node.
xfa.data.assignnode("employee.id","123",0):
So its generating the xml like below.
<employee>.
<id>123</id>.
</name>
</employee>
Now i need to generate the xml like below.
<employee id= "123" >
</Name>
</employee>
So how to set/create the id node like above?
Advance Thanks.
Regards,
Dhiyane

Hi Dhiyane,
You will have to set the contains property if the id node to "metaData", that is;
xfa.data.assignNode("employee.id","123",0);
xfa.data.employee.id.contains = "metaData";
Very clumsy if you have a number of them, in which case you might want to look at using E4X.
Good luck
Bruce

How to set the value to non enabled UDF fields

Dear All,
I created a UDF at titile level of PO and that UDF item always disabled (i.e oItem.Enabled=false). Now how can set a value through coding.
I wrote like this:
oForm = SBO_Application.Forms.GetFormByTypeAndCount(-142, 1);
                            oItem = oForm.Items.Item("U_Poap");
                            if (oItem.Enabled == false) { oItem.Enabled = true; }
                            oEdit = ((SAPbouiCOM.EditText)(oItem.Specific));
                            oEdit.Value = "1";
                            oItem.Enabled = false;
But system throws an error at : oItem.Enabled=true statement.
How to solve issue.
Thanks in advance
Suresh Yerra

Hi,
You can set the values using datasource object
oDBs_Head = objForm.DataSources.DBDataSources.Item("@TableName")
oDBs_Head.SetValue("U_FieldName", 0, "Value")
regards:
SANDY
Sandeep Saini | Roorkee | India on Dec 26, 2008 11:01 AM

How to set the value of MaxRow Property of DB Adapter 11g dynamically

I have the following requirement:-
i am using DB Adapter to connect with MsSQL server for fetching the records from the table by using simple Select Query in my DB adapter.
1. Receive request from Web Service Client number of records as input to fetch records form MsSQL Server.
2. Return the result set to the service consumer
So, here i m using MaxRow Property of Database Adapter for the number of records to be returned. But the problem is that how i can set the value to the MaxRow Property of DB Adapter dynamically from the value received as input.
If you have any other idea to return the records dynamically from MsSQL server .Please help me.

If you are using the DB Adapter as a reference and as you said, you are using custom SQL i guess...
you can use the sql like...
select top 1 * from tablename, this will result only 1 row from database(top record)...
or select top 5 percent * from tablename, if the rows in the database are 100, then it will return the top 5 records in the database...
check the exact syntax of top command with sql server...but using top keyword should solve your purpose to limit the number of records....
Hope this helps...
Thanks,
N

How to set defalut values for html:radio

Hi all,
can you please tell me how to set defalut values for radio buttons (html:radio) in struts?

You may have more luck if you ask this Struts specific question in a forum devoted to Struts at their own homepage over there at apache.org. It may also help a lot to read its documentation and tutorials. I would really be surprised if they didn't even document such a trivial thing.

HOW to set the value attribute of FORM INPUT data to a variable in a JSP

eg. Registration.jsp
The data is accessed from an hidden field called course
for example, if I have "Java programming" in the field course, and I use
an expression to access the value from the hidden field.
**My problem is that the data gets truncated to "Java" , I need "Java Programming"to display. The code looks like this
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<INPUT TYPE="text" SIZE=12 NAME="course"
VALUE=<%=getParameter("course") %>
IS there ANY OTHER WAY to set the value of VALUE to a variable?

Instead of value=<%=request.getParameter("course")%>
Use double codes
value="<%=request.getParameter("course")%>"

How to set the value of an radio button using set_radio_button_property

Similar Messages

Maybe you are looking for