How to set umask for specific directories?

Hi all.
Usually one set umask in .profile or .bash_profile. For example one recommendation is to set umask 022 for the Oracle DB software owner.
But i if wanted to change file permission for specific directories, for example udump and bdump directories, say 0177, how can that be acomplish...?
Thanks in advance ...!

Hello Frits.
I found the article pretty interesting and actually complements some research i'm doing about database security. Particularly something called project lockdown by Arup Nanda: http://www.oracle.com/technology/pub/articles/project_lockdown/phase1.html
On this document , section 1.4 Use umask. it specifcally states to set umask to 0177 for dump_dest and other directories, so it all comes down to how to set this umask for these particular directories.
I'd like to here you opinion on this ....
Best regards, Luis ...!

Similar Messages

  • How to set value for radio button in sap crm survey suite

    Hi ,
    I created a survey in CRM Service, in which I added a question with answer as '10 Selection Button Group ('radio button'). And answer has 11 answer options (which means 11 radio buttions). Now when we test the survey, the value for the radio buttons is appearing like 'id_0050569b03091ee480a29d8ee61e953c'. But i want to set a specific value for each radion button (from 1 to 11). So, how to set value for radio button in sap crm survey suite???.
    Thanks & Regards,
    Seshu

    Hi,
    I found solution myself. Click on Goto -> Editing Mode -> Expert Mode. Now you can set value for radio button.
    Regards,
    Seshu

  • How to set View for Completed items inside Tasks?

    How to set button for 'View' and see Completed items or not completed inside Tasks?

    Hi,
    You want to set custom views for Tasks folder so that when we click a view button, it will show all Completed or incomplete tasks, am I correct?
    Which version of Outlook are you using? There are existing views for completed/incomplete tasks in Outlook. In Outlook 2010 and Outlook 2013, we can find the buttons under View tab > Change View. Click Completed button to view all completed
    tasks; Click Active button to view incomplete tasks.
    In Outlook 2007, just click View > Current View to switch between different views.
    If I've misunderstood something, please feel free to let me know.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • How to set  password for BPEL domain

    Hi,
    I am new to SOA.
    I want to setup client-server environment for few developers.
    I installed SOA 10.1.3.3 in the server machine.
    And I created few domains in BPEL, one for each developer.
    It didn't ask me to set the password while creation of the domain.
    Please let me know how to set password for newly created domain so that each developer login to his/her own domain and manage processes.
    Thanks!!!

    Thanks for the prompt response.
    What roles should I give to my developers to allow them to manage their services in ESB control, BPEL control, WSM control.
    And I would like to know how to set the password for a BPEL domain too.
    Message was edited by:
    user644377

  • How to set password for every application

    Hi,
    As a administrator how to set password for every weblication in sharepoint 2013.
    Is there any way to set?
    Thanks,

    Who's password are you trying to set? Please provide more details.

  • How to set password for a zip file and should be checked when reading that

    Hi friends,
    how to set password for a zip file and should be checked when reading that file???
    thanks.
    Praveen Reddy.J

    Heyy man, i think, u did not get my problem.
    all i have to do is:
    i have to create a zip file, and we should secure it with password when creating. and whenever the user wants to open that zip file he should provide correct passowrd otherwise he could not read that file. So, we should check for that also.
    Tanks for reply.

  • How to set password for Local are connection?

    How to set password for Local are connection?

    do you mean the 802.1x authentication?
    check out links below:
    http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2950/software/release/12-1_9_ea1/configuration/guide/scg/Sw8021x.html
    http://technet.microsoft.com/en-us/network/bb545365.aspx
    Every second counts..make use of it. Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
    IT Stuff Quick Bytes

  • How to set value for trim and bleed using jsx script?

    I have tried using bleedoffsetRect but somehow it is not working. Can anybody please help me on how to set value for trim and bleed using jsx script? Any example will be highly appreciated.
    Following is the code I am trying with:
    var _saveName = new File ( root_path +_strFileName+".pdf");
        var _saveOpts = new PDFSaveOptions();
        _saveOpts.printerResolution = 300; 
        var bleedarray = new Array();
         bleedarray[0] =9.00;
         bleedarray[1]=9.00;
         bleedarray[2]=9.00;
         bleedarray[3]=9.00;    
        _saveOpts.bleedOffsetRect = bleedarray;

    I would expect although I've not actually tried this for the bleed off set box to be larger than the artbaord and the first two values to be negative or 0…
    var bleedarray = new Array(-9,-9,artboard.width+9,artboard.height+9);
    Where 'artboard.width' & 'artboard.height' you will have calculated from your file. An Array(9,9,9,9); would not constitute any boxes bounds.

  • How to set sourceURL for MS Access database in other computer?

    How to set sourceURL for MS Access database in other computer?
    getConnection("jdbc:odbc://www.micrsoft.com:9999/msaccess");
    How do you determine the port for the MS Access?
    Thank you very much.

    How to set sourceURL for MS Access database in other computer?You don't.
    How do you determine the port for the MS Access?You don't.
    Databases like Oracle and MS SQL Server have 'server' software which runs on a server computer. Requests talk to that server software. MS Access does not have a server, so there is nothing to talk to.
    You either must use a DSN or create you own server. For the DSN each client must have a mapped driver to the computer with the database. For your own server search the Sun site for JDBC drivers or use RmiJdbc (http://www.objectweb.org/)

  • How to set color for a tabstrip in BSP

    Hello all,
    Can anyone please let me know how to set color for a tabstripn in BSP?
    I am using the below syntax but it still gives me the default color.
    <htmlb:content design="design2003" >
      <htmlb:page title="test " >
        <htmlb:form>
    <htmlb:tabStrip id         = "TabStrip"
                          bodyHeight = "200"
                          bodyColor  = "red"
                          width      = "700" >
    </htmlb:tabStrip>
    </htmlb:form>
      </htmlb:page>
    </htmlb:content>
    Thanks,
    Sandeep

    Hi...
    The below code is working fine for me...
    <%@page language="abap" %>
    <%@extension name="htmlb" prefix="htmlb" %>
    <htmlb:content design="design2003" >
      <htmlb:page title="stg " >
        <htmlb:form>
          <htmlb:tabStrip width      = "430"
                          bodyColor  = "rgb(88,5,64)"
                          id         = "t1"
                          bodyHeight = "112" >
            <htmlb:tabStripItem id      = "t1"
                                index   = "1"
                                title   = "Sales"
                                tooltip = "My Tooltip for Tab 1" >
              <htmlb:textView text="Tab N 1" />
              <htmlb:tree id        = "treeReports"
                          showTitle = "true"
                          table2    = "<%= mt_nodes %>"
                          title     = "Menu"
                          width     = "100%" />
            </htmlb:tabStripItem>
            <htmlb:tabStripItem id      = "t2"
                                index   = "2"
                                title   = "Production"
                                tooltip = "My Tooltip for Tab 2" >
              <htmlb:textView text="Tab N 2" />
            </htmlb:tabStripItem>
          </htmlb:tabStrip>
        </htmlb:form>
      </htmlb:page>
    </htmlb:content>

  • How to set optional for table structure in functiona module

    hi experts,
    as i have small doubt regarding
    while publishing web service by using rfc where i am unable to set optional for table structure i am able to put optional for import parameters may i know how to set optional for table structure ....
    reagrds prabhanjan

    Ignoring the TABLES/CHANGING/EXPORTING argument...
    while publishing web service by using rfc where i am unable to set optional for table structure i am able to put optional for import parameters may i know how to set optional for table structure
    Why not?  There's no issue with marking a TABLES interface parameter with 'Optional' and publishing the function module or function group as a web service...

  • How to get Reports for specific User that how many password has been reset using FIM SSPR in FIM 2010 R2 SSPR

    Hi,
    How to get Reports for specific User that how many password has been reset using FIM SSPR in FIM 2010 R2 SSPR
    Regards
    Anil Kumar

    Hello there Anil,
    A simple way to quickly get a overview is to look at the request history within the portal environment (note that this will expire in a few day based on your environment, after that you would need to FIM Reporting Module - but you could increase this to
    maybe 60 days to so, watch the DB size).
    To do this you could create some custom search scopes of do some custom queries. The creator of the SSPR activities always has the same GUID so you can use that so search.
    In your search scope you can use the following XPath to play with.
    - All Password Reset Requests - /Request[Creator='b0b36673-d43b-4cfa-a7a2-aff14fd90522' and Operation='Put']
    - All Completed Password Reset Requests - /Request[Creator='b0b36673-d43b-4cfa-a7a2-aff14fd90522' and RequestStatus=‘Completed']
    You can play with the "RequestStatus".
    Hope this helps.
    Almero Steyn (http://www.puttyq.com) [If a post helps to resolve your issue, please click the "Mark as Answer" of that post or "Helpful" button of that post. By marking a post as Answered or Helpful, you help others find the answer
    faster.]

  • How to set value for selectOneChoice

    Hello,
    How to set value for selectOneChoice defined as:
    <af:selectOneChoice label="Label" id="soc1" binding="#{DepositorMergingBean.socSurnameComponent}">
    <f:selectItems id="si1" value="#{DepositorMergingBean.socSurnames}"/>
    </af:selectOneChoice>
    where socSurnames is List<SelectItem> - manually filled list of SelectItem(SomeObject, (String)text_description), so - SOC is filled manually (no binded iterators, etc..)
    Neither socSurnameComponent.setValue( new Integer(0) ) nor socSurnameComponent.setValue( socSurnames.get(0) ) do not help.
    Thanks in advance.

    this.selectOneChoice.setValue(selectItems.get(2).getValue());Try as per the following sample:
    SelectOneChoiceTest.JSPX:
    <af:form id="f1">
    <af:selectOneChoice label="Select One Choice" id="soc1"
    binding="#{SelectOneChoiceTestBean.selectOneChoice}">
    <f:selectItems value="#{SelectOneChoiceTestBean.selectItems}"
    id="si1"/>
    </af:selectOneChoice>
    <af:commandButton text="Set Selected Value" id="cb1"
    actionListener="#{SelectOneChoiceTestBean.onClick}"/>
    </af:form>
    SelectOneChoiceTestBean.java:
    import java.util.ArrayList;
    import java.util.List;
    import javax.faces.event.ActionEvent;
    import javax.faces.model.SelectItem;
    import oracle.adf.view.rich.component.rich.input.RichSelectOneChoice;
    public class SelectOneChoiceTestBean {
    private RichSelectOneChoice selectOneChoice;
    public SelectOneChoiceTestBean() {
    super();
    private List<SelectItem> selectItems;
    public void setSelectItems(List<SelectItem> selectItems) {
    this.selectItems = selectItems;
    public List<SelectItem> getSelectItems() {
    selectItems = new ArrayList<SelectItem>();
    selectItems.add(new SelectItem("One", "One"));
    selectItems.add(new SelectItem("Two", "Two"));
    selectItems.add(new SelectItem("Three", "Three"));
    return selectItems;
    public void setSelectOneChoice(RichSelectOneChoice selectOneChoice) {
    this.selectOneChoice = selectOneChoice;
    public RichSelectOneChoice getSelectOneChoice() {
    return selectOneChoice;
    public void onClick(ActionEvent actionEvent) {
    this.selectOneChoice.setValue(selectItems.get(2).getValue());
    Thanks,
    Navaneeth

  • How to set registry for sql client on win...

    Hi.
    how to set registry for sql client on win fro work with Ukranine
    charset.
    I got such problem
    nls_language set to American_Ukranine.clmswin1251 on client
    this give me ukraniane char.
    but it override all my settings in initsid.ora this mean
    nls_date_format=DD-MON-YYYY
    nls_date_languages
    twhen I type select sysdate vrom dual answer is 11-jun-99, but
    not 11-(ukr month)-1999;
    What should I correct in regestry? ( i don't like to do alter
    session set..... each time I start sqlplus )
    Thank You in advice
    null

    you can create method on Application Module and to Client listener
    like
        public  Object[] getData(Number n,Date d)
    Object val[]= new Object[2];
    String sp = "{? = call get_data(?,?,?)}";
                Connection conn = null;
                CallableStatement proc = null;
                try {
                 //   conn = isConnSupplied ? userConn : ResourceManager.getConnection();
                    proc = getDBTransaction().createCallableStatement(sp,0);
                proc.registerOutParameter(1, OracleTypes.Number);
                proc.setObject(2,12);
               proc.setObject(3,dateobj);
              proc.registerOutParameter(2, OracleTypes.VARCHAR);
                proc.executeQuery();
                 int amttext= proc.getInt(1); //for return value
    String msg=proc.getString(2);//for out param
    val[0]=amttext;
    val[1]=msg;
                catch(Exception e)
                    System.out.println(e);
    return val;
    }and access this method from backing bean using following code-
                BindingContext bindingctx=BindingContext.getCurrent();
                   BindingContainer binding=bindingctx.getCurrentBindingsEntry();
                OperationBinding operationBinding1 = binding.getOperationBinding("getData");
                operationBinding1.getParamsMap().put("n",anyno);
                operationBinding1.getParamsMap().put("d",dateobj);
                operationBinding1.execute();
                String vval[] =(String[])operationBinding1.getResult();

  • How to set Classpath for MySQL

    Hi
    I want to connect to my mySQL db with a java program , but I don't know how to install the mySQL connector driver. Can anyone help me? or indicate somewhere where I might find the answer?
    And how to set Classpath for MySQL.
    my program gives an exception ClassNotFound.
    Exception :com.mysql.jdbc.Driver
    java.lang.ClassNotFoundException: com.mysql.jdbc.Driver
    at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:164)
    at Files.main(Files.java:352)
    Plz help me
    Thanx
    Lalit

    to make your life easy i tried to connect..
    what you have to do is.. you mysql database server should be running
    next you have to download one of the version of mysql driver.. i downloaded mysql-connector-java-5.0.5
    go to my computer right click - >advance tab -> click on environment variable -> put you path e.g. C:\Program Files\Java\jarFiles\mysql-connector-java-5.0.5\mysql-connector-java-5.0.5-bin.jar
    into your classpath in a user variable section..
    Try this code
    import java.sql.*;
    public class MySqlConnect{
         public static void main(String [] args){
              try{
                   Class.forName("com.mysql.jdbc.Driver");
                   String url ="jdbc:mysql://localhost:3306/test";
                   Connection con =DriverManager.getConnection(url,"root", "password");
                   System.out.println("Connection: " + con);
              }catch(ClassNotFoundException cnfe){
                   cnfe.printStackTrace();
              }catch(SQLException se){
                   se.printStackTrace();
    }have fun
    Gurnah

Maybe you are looking for

  • How to set up and use AirPlay

    How to set up and use AirPlay

  • R12 AR-Receipt Refund Error:ORA-01403 no data found

    Hi,all That apply the receipt to refund and enter the refund attribute all are done well ,while I save it it dispalys a warning message:ORA-01403 no data found. Below is the statement message I get from the fndlog_messages_ ar.plsql.ar_refund_pvt.cre

  • Repeat command in illustrator

    Hello, Is there a repeat command like the one you find in office (control+Y). My problem is that I have a bunch of objects in a page, each one is 100 pixels height, I want to change each one to 95. Any suggestions? By the way, is there any format pai

  • SELECT seems to ignore a space

    Hi: I'm hoping someone can shed some light on this strange case. A table is being loaded from a 3-party source. One column is a 5-digit identifier. For whatever reason a space is coming in as a 6th character. Let's ignore the fact that we can fix the

  • How to change Apple ID associated on Mac?

    I just downloaded Mountain Lion and when I was setting up iCloud, I mistakenly put in the wrong Apple ID. I had iCloud set up under my me.com address, but put in the other ID I have for iTunes. Now I can't sync. How can I change the Apple ID on my iC