How to set UOM in the material Specification Section of Trade?

Dear,
When I select UOM in the material Specification Section of Trade, I cannot find Volume UOM as ml , L...
How Can I add some UOM Item for this Qty column? Because some beverage products use volume UOM.
Thanks

Anytime you consume a material spec (in a trade or a formulation spec lets say) the UOM list is defined by a few things:
1. Standard Mass Listing is always included
2. Volume UOMs appear if density is defined on the material specification
3. Additional "Other" UOMs will appear if defined in the Available UOM > UOM Conversions Grid
There is a strict UOM configuration available that allows you to restrict which UOMs are used per specification. It this is turned on then only the UOMs listed in the Available UOMs section will appear in the drop down.
Hope this helps,
Kelly

Similar Messages

How to change the base UoM in the material master?

Hi,
I want to change the base UoM in the material master for a particular material but I can't change irt with MM02 as system says it has open routings for this material.
I have set the deletion flag on the routings but still system shows open routings while changing UoM.
Is there any standard SAP program by which UoM can be changed if open POs, stock etc. are present in the system?
Thanks,
Input

HI
It is possible to change the Base unit of measure in the following cases:
1) If there are no stocks of the material in the syatem
2)If there are no purchase requisitions, purchase orders, or scheduling agreements for the material.
3)If a purchase order or purchase order item is not being created or changed.
Procedure for changing is:
Access the material master record in Change mode.
Overwrite the old base unit of measure with the new one on any departmental data screen.
Save the change.
Thanking you.

How to set and retrive the index log path stored by parameter LOG_DIRECTORY

how to set and retrive the index log path stored by parameter LOG_DIRECTORY.

http://download-west.oracle.com/docs/cd/B19306_01/network.102/b14213/lsnrctl.htm#sthref72
http://download-west.oracle.com/docs/cd/B19306_01/network.102/b14213/cmctl.htm#sthref239

How to set values to the structure containing a node with cardinality 0..n

Hello.
I 'm trying to set values for the node with cardinality 0..n. The node type is "Fields".
<xsd:complexType name="Field">
 <xsd:sequence>
 <xsd:element name="fieldCode" type="xsd:string"></xsd:element>
 <xsd:element name="displayValue" type="xsd:string" minOccurs="0"></xsd:element>
 </xsd:sequence>
</xsd:complexType>
<xsd:complexType name="Fields">
 <xsd:sequence>
 <xsd:element name="field" type="tns:Field" minOccurs="0" maxOccurs="unbounded"></xsd:element>
 </xsd:sequence>
</xsd:complexType>
I need to set several values for the element "fieldCode" but it has cardinality 0..1 and BPM does not allow it but I did not find any option about how to set values for the structure of type "Fields". Could you help me?
Best regards,
Timur Semenchuk

Hi Marcus,
If there is no way you could change the cardinality of the node, and thus it can contain 0..n items, I think you should create-and-add a new element programmatically.
Since the collection can contain zero elements, I would add a 'new' button, which upon clicking adds one new element via:
IYourNodeElement yourNodeElem = wdContext.nodeYourNode().createYourNodeElement();
wdContext.nodeYourNode().addElement(yourNodeElem);
Hope this explains a bit!
Best,
Robin van het Hof

Does anyone know how to set alerts in the iCloud calendar of Outlook 2010 for PC?

Does anyone know how to set alerts in the iCloud calendar on Microsoft Outlook 2010 for a PC? Outlook gives me a warning message and does not allow me to save alerts for calendar events created in iCloud calendar. It will allow me to save events in the non-iCloud calendars.

Ignore what office says, when the warning comes up saying that the reminder will not work click on yes,
I just tested it and i had the reminder on my ihpone in outlook and also as i had the calendar open in safari it popped up on there too ( I wasn't aware it did that)

How to set focus on the last row of JTextPane

how to set focus on the last row of JTextPane?
import javax.swing.*;
import javax.swing.text.html.*;
import java.awt.*;
import java.awt.event.*;
public class MyGUITest extends JPanel implements ActionListener
{ public static void main(String[] args)
 { SwingUtilities.invokeLater(new Runnable()
 { public void run()
 { JFrame f = new JFrame("My GUI");
 MyGUITest GUI = new MyGUITest();
 GUI.setOpaque(true);
 f.setContentPane(GUI);
 f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
 f.pack();
 f.setLocationRelativeTo(null);
 f.setVisible(true);
 JTextPane txtP;
 JButton add;
 HTMLEditorKit hek;
 HTMLDocument hd;
 String txt;
 MyGUITest()
 { this.setLayout(new BorderLayout());
 this.setPreferredSize(new Dimension(400,200));
 txtP = new JTextPane();
 txtP.setEditable(false);
 txtP.setContentType("text/html");
 txtP.setText("");
 hek = new HTMLEditorKit();
 txtP.setEditorKit(hek);
 hd = new HTMLDocument();
 txtP.setDocument(hd);
 JScrollPane sTxtA = new JScrollPane(txtP);
 add = new JButton("add");
 add.addActionListener(this);
 sTxtA.setBorder(BorderFactory.createTitledBorder(""));
 this.add(sTxtA, BorderLayout.CENTER);
 add(add, BorderLayout.SOUTH);
 new Thread(new Runnable()
 { public void run()
 { while(true)
 { try
 { Thread.sleep(100);
 }catch(InterruptedException ex)
 { ex.printStackTrace();
 appendText("This is HTML text");
 //add.doClick();
 }).start();
 public void actionPerformed(ActionEvent e)
 { txt = "asd";
 try
 { hek.insertHTML(hd, hd.getLength(), txt, 0, 0, null);
 }catch(Exception ex){ ex.printStackTrace(); }
 public void appendText(String txt)
 { try
 { hek.insertHTML(hd, hd.getLength(), txt, 0, 0, null);
 }catch(Exception ex){ ex.printStackTrace(); }
}thanks~

anIdiot wrote:
im not sure what is the caret location...So don't youthink you should have looked for it in the API?
anyway, i want the scroll bar to scrolled down automatically when the output is displayed.
normally, the scroll bar is scrolled down automatically when a new text is inserted, but it doesnt work on this timeGo through camockr's http://tips4java.wordpress.com/2008/10/22/text-area-scrolling/
db

How to set Border in the Excel using UTL_FILE ?

Hi all,
Any one aware of
How to set Border in the Excel using UTL_FILE ?
Am doing excel creation from a stored procedure.
Thanks
Dora

Hello Dora,
if you need more than simple csv: at Re: How to save a query result and export it to, say excell? you can find links to different solutions. At least the package behind the second link supports defining your own formats (and has a tutorial how to do it).
Regards
Marcus

How to set Blocking Indicator for product specific TransportationLanes?

Hi All,
I'm facing a problem while trying to set the blocking indicator for product specific Transportation Lanes-external procurement.
How can i proceed on the same?
I've figured out 2 methods for blocking the product specific TLanes.
1. using /SAPAPO/TR_TL_TRANSFER_BAPI.
2. using BAPI_TRLSRVAPS_SAVEMULTI.
I tried using the BAPI - /SAPAPO/TR_TL_TRANSFER_BAPI, which comes inside the DELETE BAPI - BAPI_TRLSRVAPS_DELMULTI. Although I had passed the parameters reg. external procurement, nothing seemed to be happening in the system. There was no blocking indicator - D(locked and flagged for deletion) set against the subjected TLane. In fact, to my amazement, the BAPI didn't return even a single msg. BAPIRETURN internal table after execution was empty.
Here, I'm passing:
(IV_LOGQS) TYPE /SAPAPO/LOGQS
(IV_LOGSYS) TYPE LOGSYS
(IV_CALLER) TYPE /SAPAPO/MD_CALLER
(IT_TR) TYPE /SAPAPO/TR_TTD_TR
(IT_TR_X) TYPE /SAPAPO/TR_TTX_TR
(IT_TRPROD_SRC) TYPE /SAPAPO/TR_TTD_TRPROD_SRC and
(IT_TRPROD_SRC_X) TYPE /SAPAPO/TR_TTX_TRPROD_SRC
I haven't tried on the second method yet. Is there any other programming alternative for setting the blocking indicator of a TLane / multiple Tlanes?
Could anyone pls explain and guide me on a suitable method to be chosen and the process to be followed, parameters to be passed, etc.

Hi Sanjay,
Use the standard BAPI: BAPI_TRLSRVAPS_SAVEMULTI2 (according to SCM version you are using)
to update the deletion flag for product specific T-lane, in this BAPI you have to pass the data to EXTERNAL_PROCUREMENT parameter table in which LOCKED_FLG field is there in which you can pass the "D" for deletion or block flag.
Also you have to pass the same entries in EXTERNAL_PROCUREMENT_X parameter table of this BAPI.
If any further help required, refer the documentation of BAPI or let me know.
I hope this will help you to solve the issue.
Regards,
Saurabh

How can I fast refresh the materialized view !!

I created a MV base on some tables in order to improve the querey speed.
but the mv I have created falied to refresh fast.
because there are two same table in the from clause:
jcdm jc1,jcdm jc2
create materialized view temp_mv
nologging
pctfree 0
storage (initial 2048k next 2048k pctincrease 0)
parallel
build immediate
refresh force
on demand
as
select
TAB_GSHX.rowid hx_rid,
TAB_GSHD.rowid hd_rid ,
JC1.rowid jc1_rid ,
JC2.rowid jc2_rid ,
YSHD_ID     HXID,
JC1.JCDM     QFD,
JC2.JCDM     JLD
FROM
TAB_GSHX,
TAB_GSHD,
jCDM JC1,
JCDM JC2
WHERE
YSHD_ID=YSHX_ID
AND YSHD_QFD=JC1.JBJC_ID
AND YSHD_JLD=JC2.JBJC_ID
AND TO_CHAR(YSHX_time,'YYYYMMDD')='20030101'
the column msgtxt of the table MV_CAPABILITIES_TABLE is :
"the multiple instances of the same table or view" and " one or more joins present in mv".
How can I succeed in fast refresh the above temp_mv!!!
thanks.

lianjun,
When you are using Oracle9i there is a procedure which can help you setup the materialized view. If some option isn't working it gives you hint why it doesn't work.
The procedure is dbms_mview.explain_mview.
Take a look at the documentation how to use it. (In the Oracle9i DWH guide the package is explained.)
Hope this helps
With kind regards,
Bas Roelands

I have destroyed the motherboard of a Mid 2009 MacBook Pro. How do I find out the technical specifications so I can give accurate information to someone who buys it for parts?

I recently had an unfortunate incident with a glass of water and a mid 2009-MacBook Pro. 13 inch screen.
According to the techs at the genius bar, the screen, keyboard, chassis and hard drive (160g) were still all good - as were all components other than the Motherboard.
I just completed the complete erasure of the hard drive, but don't have the technical specifications at my disposal.
Does anyone know how I can get them - the guy at apple said he didn't think he could help?
Serial No. Is available.
Thanks-

http://www.everymac.com/

How to find vendor of the material?

Hi!
I want to know how to find vendor who supplied the material. for eg i am displaying the material in list if user clicks in the material he should be displayed the vendor who supplied the material.
what all the table to access whats the link. Pls reply ASAP.
Thanks,
Imran.

Hi
Refer:
http://www.erpgenie.com/sap/abap/tables_mm.htm
For Tables and Relations.
Regards,
Sree

How to set focus on the title of JTabbedPane

I have created a JTabbedPane and added three JPanels to it. They are titled, say "Panel 1", "Panel 2" and "Panel 3". And each of them contains buttons and text areas. Since this app is for physically disabled users, it must provide navigation through these three tabs with keyboard operations only (i.e. without mouse clicks).
When the title "Panel 1" gets focused, users can go to "Panel 2" by the right arrow key. When Panel 2 is brought up, however, the title "Panel 2" does not get focused. Instead the first button inside panel 2 is focused. In order for users to navigate to 'Panel 3" by the arrow key, the title "Panel 2" has to be focused. How do I set focus on the tab title?
I have tried 'requestFocus()' on Panel 2, but it does not work. Please help me with this issue. Thanks in advance.

I'd be quite interested to know if this can be doen as well so I thought I'd post this message to move it to the top of the board.
Thanks.

How to set widescreen for the guest OS (Oracle Linux 5) in Oracle VM 4.1.12

Hi all
I have got a concert about how to set the guest system(Oracle Linux5) to use widescreen? appreciate whatever you can help!
Thanks,

You're looking for the VirtualBox forums. https://forums.virtualbox.org/
This forum is for discussion of Oracle VM Server.

Process open items: how to set defaults for the additional selections

Hi FI experts,
Can anyone tell me if it is possible to set defaults for the additional selections in the processing of open items.
I am using transaction F-04 (or F-06 or F-07) to post with clearing.
When processing the open items I can use additional selection parameters. In my case I need to use the document type. I would like to save this selection as a default but this doesn't seem to be possible.
1. it is not possible to save a variant for the processing of open items
2. I can not create a variant transaction (with trx. SHD0) for F-0x since this is only possible for dialog transactions
Do you see another way to store defaults for the additional selections in open item processing?
Thanks a lot.
Dimitri

Hi,
When you create a transaction variant from FB05, then also you will not able to default the value for additional selections variable. Hence SHD0 is not going to help.
As said above, either you can change the additional selection screen parameters, but here again you can't default the value. You can only reduce the number of entries on the screen.
Else you can create a custom transaction code by copying the standard. Even SAP recommends to create custom codes from standard tcode for clearing purposes depending on requirements.
Please check this link:
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/41/37b8e7455b11d182b40000e829fbfe/frameset.htm
In the above link, in navigation choose clearing -- Specifications for processing open items
If it is a custom transaction then you can default document number.
Regards,
Ravi

How to set "Identity" of the MDM Payload from iPhone Configuration Utility?

Does anybody know how to set the "Identity" of the Mobile Device Management (MDM) payload of a Configuration Profile from iPhone Configuration Utility (iPCU)? The description says that this is the "Cryptographic credential used for authentication" and I should "Add credentials in the Credentials payload". Any help is appreciated.

The Identity field in the MDM payload section of a configuration profile can only be set AFTER you have set the correct credential in the Credentials section. If you have set the correct credential in the Credentials section, then you will (in my experience) only have one choice for Identity in the MDM payload section. It will be the correct choice fortunately.
To set the correct credential in the Credentials section of the configuration profile, you must have a valid personal certificate in the Windows certificate store. If you have a valid personal certificate in the Windows certificate store it will show up in the (very long) list of certificates you can choose from when you click on Configure in the Credentials section.
You should be prompted for the password for 'exporting your identity'. Fill in both boxes and then click on OK. The set the password again. Yes, the password must be entered three times.
At this point you can go back to the MDM payload section and everything should be OK.
Note that my comments only apply to Windows. My system is Windows 7. However, only version of Windows probably works the same.

How to set UOM in the material Specification Section of Trade?

Similar Messages

Maybe you are looking for