How to set up 2 agreements for the same From,To,DocType,Version in B2B11g

Hi
I am having an issue in configuring more than one agreement for the same DocType, Version, From and To partner in Oracle B2B11g.
When I click "Valid" button on the second agreement it errors out saying duplicate agreement is found for the same DocType, Version, From and TO partners.
Is there any mechanism to over ride this?
We need to have multiple agreements created for the same To Partner, From Partner, Doc Type and Version. Otherwise we will end up creating multiple partners which is a real pain.
Multiple agreements are required because we have to set up different Interchange and Group IDs for each transaction.
-Sriharish.
Edited by: 840696 on Mar 1, 2011 7:30 AM

You can not have two agreements for same From TP,To TP,DocType & DocType revision combination in B2B 11g.
Multiple agreements are required because we have to set up different Interchange and Group IDs for each transactionIs this requirement for outbound or inbound? You may send Internal Properties from back-end to override envelope parameters in Oracle B2B in case of outbound -
B2B 11G Outbound EDI Envelope Override
http://www.b2bgurus.com/2008/09/internal-properties-in-oracle-b2b.html (this blog is for 10g, so read concept only, not settings)
In case of Inbound, TP identification can be done on the basis of exchange, interchage, group. So if any of this can be same then you may have single agreement. Make sure to enable property "Functional Ack Internal Properties" on B2B console (Administration --> Configuration)-
http://download.oracle.com/docs/cd/E17904_01/integration.1111/e10229/bb_config.htm#CEGEADFJ
Regards,
Anuj

Similar Messages

How to set up automatic payment for the purchase order

Hi, All,
I have one question how to set up automatically payment for the Rent Office purchase Order?
There is the requirement from the client. They want to create one kind of purchase order for the Office Rent, then pay the fees in the certain time of every month to the vendor for the rent fees without any invoice. Whatu2019s the normal solution for this kind of purchase order? Is it ERS? Or something else?
Please give me the details and business flow. Also please tell me how to setup in the SAP and T-code.
Thanks in advance

Either you can set up ERS or you can pay directly from the FI side.
Prerequisites
Evaluated receipt settlement must be flagged in the purchase order item.
The vendor must be flagged as being subject to ERS in the vendor master record.
The goods receipt must refer to a purchase order.
Goods-receipt-based Invoice Verification must be defined for the purchase order item.
A tax code must have been maintained in the purchase order item.
The order price of the materials may not be an estimated price.
If you flag a vendor as being subject to ERS, the system sets the ERS indicator as a default in each item when you create a purchase order for the vendor. You can prevent this happening for certain vendors by flagging the info record for the material and the vendor as not being subject to ERS.
In Purchasing, you can delete the default ERS indicator in a purchase order item.
Choose Logistics Invoice Verification ® Automatic Settlement ® Evaluated Receipt Settlement (ERS).
The selection screen appears.
You can use the following criteria to narrow down selection of the transactions to be settled:
Company code
Plant
Goods receipt posting date
Goods receipt document
Fiscal year of the goods receipt
Vendor
Purchase order and order item
You can define the selection criteria for the invoice documents by:
Delivery
Purchase order
Purchase order item
Goods receipt document
Credit memo
Invoice
Currency
Choose Execute.
The system issues a log for Evaluated Receipt Settlement, which displays the following:
Settled
In line with your selection criteria, the system displays all the order items that were settled (or if you are working in test mode, which would have been settled).
Could not be settled
In line with your selection criteria, the system displays all order items for which ERS is defined but could not be settled. It also lists the reasons.
If the system reports being unable to invoice a transaction, you should exclude the transaction from ERS to avoid it being included in the log the next time ERS is run.
Select the item and choose Exclude from ERS.
The system also generates and possibly sends a message to inform the vendor(s) about the transaction settled, depending on the settings in Customizing.
You can display the following environment information for the order items selected. To do this, choose Goto ®:
Display purchase order
Display invoice
Display material document
Display long text

How to create multi garnishment order for the same garnishment document

Hi,
Can anyone tell me how to create multi garnishment order for the same garnishment document. I tried to copy the entry in IT0195 but the sequence field is grayed out so it will just delete the old record. What configuration should I do to make this possible?
Thanks a lot in advance.

hi,
As far as I got it.
You cannot have multiple Garnishment order but if a need arises you have to maintain it in IT216.
For that follow this path goto PA30->pernr->194->change->Garnishment->adjustment.
Since like order you cannot maintain adjustment also directly.
Regards,
Amit
Reward all helpful replies.

TS1389 how to authorize computer in itunes for the purchased from another account

how to authorize computer in itunes for the purchased from another account ??

Use that account's Apple ID and password; the procedure is otherwise the same as authorizing it for the first account. If the iTunes library contains protected content from more than five iTunes Store accounts, you may not be able to fully sync it.
(92807)

Hi experts, how i can make confirmed quantity for the same day ???

Hi experts, how i can make confirmed quantity for the same day ???
regards,
uday

Hi Joao/ Phani,
I have created a sales order in my IDES system with VA01 today and the delivery dates is confirmed for tomorrow ie 21st.
My Question is how can i change the confirmed delivery date for the same day ???

How to create an alternative bom for the same product

Hi expert,
I want to know how to create an alternative bom for the same product. Can i use the different bom usage to create or use the same bom usage? In addition, how can i use the production version to link the alternative bom for the same product?
Please help me solve the problem.
Thanks in advance for any assistance.
George shi

HI
you can go with t-code CS01
if you have the BOM already and you want to create the alternative BOM then just goto create BOM
and enter the material and plant and uasge system will auto matically prapose the next numner ie, if you have Alt BOM1
then next system will prappose 2.
then you can enter the components as per you requirement
if you go to different BOM usage then sytem will not go for alternative BOM it gives again alt bom 1.
prodcution version you need to craet from mateial master
each version you can go woith alternative BOMS
Version 1 will have alt BOM1
Version 2 can haev ALT BOM2
-ashok

How to set a backgound pic for the panel

I use a JTable as a member of a JPanel Object, and I want to set a backgound pic for the panel ,How to?

Hello,
import java.awt.*;
import javax.swing.*;
public class ImageTest extends JFrame
     public static void main(String[] args)
          new ImageTest();
     public ImageTest()
          setDefaultCloseOperation(EXIT_ON_CLOSE);
          MainPanel pan = new MainPanel();
          pan.add(new JTable(6, 3));
          getContentPane().add(pan);
          pack();
          setVisible(true);
     class MainPanel extends JPanel
          private Toolkit tool = Toolkit.getDefaultToolkit();
          private MediaTracker media = new MediaTracker(this);
          private Image background = tool.getImage(yourImage);
          MainPanel()
               super();
               media.addImage(background, 0);
               try
               {     //wait to calcute sizes correctly
                    media.waitForID(0);
               }catch (InterruptedException e){}
          public void paintComponent(Graphics g)
               super.paintComponent(g);
               g.drawImage(background, this.getX(), this.getY(), this);
          public Dimension getPreferredSize()
               return new Dimension(background.getWidth(this), background.getHeight(this));
}regards,
Tim

How to maintain two credit limits for the same customer.

We have two lines of business for the same company code. One customer is trading in two lines of business.
We want to maintain two credit limits for same customer. How is this possible.

Hi,
Credit Limits are assigned to customer master in a credit control area, so a customer can have different credit limits for the different credit control areas.
(Please note that Credit Control Areas are normally assigned to company codes or sales area.)
But if you are having only one credit control area, then only one credit limit can apply.
However you can use the user exits to put any check you want for the customer. There are various user exits available for it like LVKMPTZZ,LVKMPFZ1,LVKMPFZ2 and LVKMPFZ3 in transaction SMOD
Regards,
Gaurav

How to construct table in jsp for the resultset from helper class

Hi Dudes!!!
Want to construct table in jsp for the resultset, but the resultset are retrieved at the helper class.I constructed Table in Helper class Using StringBuffer and return it as string from the helper class.Is their any other feasible and efficient way to construct table in Jsp for the resultset from Helper class.Solution will be highly appreciated.Thanx in Advance.

no, we can't.
Certainly noone can with such vague specifications even if they had the intent to do so.
"the computer", which computer?
"attach to our current page", what is meant by that?
And noone should ever help you if you're planning to breach security anywhere.

How to set a fixed size for the browser window on startup?

so the browser window has the same size and location on the desktop every time i open a new window???

In a 2D coordinate system the horizontal values are represented by some letter, usually x. In the same coordinate system the vertical values are classically represented by y.
Note: In your code, if you wish, you can replace x and y with anything you desire--p and q or perhaps jeff and alice or any variable name you wish, but for simplicity, and usually ease of understanding because almost everyone has had 100's of math problems drilled into their head with (x, y), x and y are used as convention.
In Java the screen coordinates run from 0 to the width-1 for x and 0 to height-1 for y of the component you are using to display.
So logically when you have a value of x or y that goes beyond the addressable bounds of your display, then you have to make some type of adjustment--when your value dips below 0, you reset it to 0, when your value goes above what ever width-1 or height-1 then you have to set that value to width-1 or height-1.
This all assumes that when you hit the wall, floor, or ceiling you stick there until you change directions--if you wish to wrap then you set your value to the opposite bound--so if you go below 0, you would then pop out back in on the right side--your appropriate x would be set to width-1 instead of 0 and in the case of y going below 0 your y would be set to height-1. This is also to say that when you descend below your minimum, then you would pop back out on the opposite side you went out on--so x greater then width-1 would get set to 0 and y greater than height-1 would get set to 0.
That is not even a start on if you want to include elastic collisions, angle of impact, any type of deceleration force, or anything else.
In any case... I would recommend that you add more math to your studies, I've never met an engineer or computer science grad that said: "Wow, I really regret taking all that math in college (or HS), I never use it."

How to set Different applications running on the same computer to use different Gateways?

Dear All,
I would like to have different applications running on the same computer to use different Gateways (both gateways are in the same subnet).
Is it possible in Windows7 with / without a third-party utility?
Current scenario & requirements:
I have two internet connections. Both are in the same subnet (192.168.1.0/24) and connected to the same LAN switch
Gateway for the first connection is 192.168.1.1
Gateway for the second connection is 192.168.1.2
I need to set my chrome browser & google talk to use the gateway 192.168.1.1
I need to set my IE & skype to use the gateway 192.168.1.2
Is it possible? Answers are appreciated!!
Regards,
Anees

Hi,
I agree with Bill. Gateway is essentially an IP address for one network to other networks. For example, you have two networks: network A and network B, to make the two networks communicate with each other, you must go through Gateway. That is, as long
as you set Gateway, then you can make the two networks communicate with each other. The ip address for Gateway is the ip of device with routing enabled. One host machine can own multiple gateways.
Andy Altmann
TechNet Community Support

How to handle Multiple date formats for the same date field in SQL*Loader

Dear All,
I got a requirement where I need to get data from a text file and insert the same into oracle table.
I am using SQL*Loader to populate the data from the text file into my table.
The file has one field where I am expecting date date data in multiple formats, like dd/mon/yyyy, yyyy/dd/mon, yyyy/mon/dd, ,mm/dd/yyyy, mon/dd/yyyy.
While using SQL*Loader, I can see Loading is failing for records where we have formats like yyyy/dd/mon, yyyy/mon/dd, mon/dd/yyyy.
Is there any way in SQL*Loader where we can mention all these date formats so that this date data should go smoothly into the underlying date column in the table.
Appreciate your response on this.
Thanks,
Madhu K.

The point being made was, are you sure that you can uniquely identify a date format from the value you receieve? Are you sure that the data stored is only of a particular limited set of formats?
e.g. if you had a value of '07/08/03' how do you know what format that is?
It could be...
7th August 2003 (thus assuming it's DD/MM/RR format)
or
8th July 2003 (thus assuming it's MM/DD/RR format)
or
3rd August 2007 (thus assuming it's RR/MM/DD format)
or
8th March 2007 (thus assuming it's RR/DD/MM format)
or even more obscurely...
3rd July 2008 (MM/RR/DD)
or
7th March 2008 (DD/RR/MM)
Do you have any information to tell you what formats are valid that would allow you to be specific and know what date format is meant?
This is a classic example of why dates should be stored on the database using DATE datatype and not VARCHAR2. It can lead to corruption of data, especially if the date can be entered in any format a user wishes.

How to manage different supply parameters for the same item based on demand quantity?

We are using unconstrained ASCP. We have some products that can be produced in a 'small' machine or can be produced in a large tank. If ASCP has created a planned order for a quantity less than 1000 it will be made on the small machine with the supply quantity = demand quantity. For example, we have a demand of 250, we will make exactly 250 on the small machine. But if the demand quantity is greater than 1000 we will make the supply in the tank with a fixed order quantity of 1590. Financially it will cost us less to do this and scrap the difference because the small machine is very expensive to run compared to the tank.
The challenge is, say we need 1200. ASCP generates a planned order for 1200 and all the dependent demands support 1200. Now we want to make 1590 and we are short of materials. This assumes we have set the item with no supply parameters. On the other hand, if we set a fixed order quantity of 1590 but only need 100 then we we have to scrap the materials for the balance due to a short shelf life.
Any ideas how to set a supply quantity using different parameters based on the demand quantity?
Mark Madal

Hi Mark,
I personally don’t see any standard solution for this requirement especially with an unconstrained plan.
However, if it is feasible, you can try below solution with a 'constrained plan with decision rules enabled' and check if it works,
1.   1. Define two different items – Item A and Item B
2.   2. Item A uses small machine in its routing and can have any demand that is below 999. So, Max order quantity = 999.
3.   3. Item B uses Large Tank in its routing and is a substitute of item A. Also, fixed order quantity = 1590.
4.   4. Define component substitution relationship between A and B. A and B will have identical BOM.
In a constrained plan with decision rules enabled, optimization logic will ensure that planned orders are generated for Item A whenever there is demand below 999. And for Item A, supply will always be equal to demand quantity. When the demand is more than 999, optimization engine will select substitute item B and will generated fixed supply of 1590 for it.
Check if this satisfies your requirement.
Regards,
Durgesh P
(Please mark this post helpful or correct, if answered)

How do I make simplesearch look for the same tag in multiple locations

Currently i'm trying to write a simplesearch implementation that will only return the result it if contains a specific tag. I would also like to include DAM assets in the search, wherein lies the problem:
I need to look in both jcr:content and jcr:content/metadata for the tag, and if the tag is found in either location, return that page. Here is the code I am trying to use, but it currently only looks for the tag(s) in one location. Any tips on how to get it to look in multiple locations?
Code:
                    tagPredicate = new Predicate("tags2", "tagid");
                    tagPredicate.set("property", "jcr:content/cq:tags");
                    for (Cookie cookie : tagsFromCookie) {
                                   if (cookie.getName().contains(CREDENTIALS)) {
                                                  tagPredicate.set("tagid",
                                                                      (cookie.getValue().replaceAll("---", ":")));
                                                  search.addPredicate(tagPredicate);
Thanks for any help you can give!

I figured this one out on my own. Kind of a "Doh!" moment.
What I ended up doing is this: I created a PredicateGroup, and populated this group with the predicates I needed. Then, I set the PredicateGroup allRequired to false. Voila! It works!
Code:
          PredicateGroup tagPredicateGroup = new PredicateGroup();
                    tagPredicateGroup.setAllRequired(false);
                    Predicate tagPredicate = new Predicate("tags", "tagid");
                    if (slingRequest.getParameter(GROUP1) != null) {
                                   tagPredicate = new Predicate("tags", "tagid");
                                   tagPredicate.set("property", "jcr:content/cq:tags");
                                   tagPredicate.set("tagid", GROUP1);
                                   tagPredicateGroup.add(tagPredicate);
                                   tagPredicate = new Predicate("damTags", "tagid");
                                   tagPredicate.set("property", "jcr:content/metadata/cq:tags");
                                   tagPredicate.set("tagid", GROUP1);
                                   tagPredicateGroup.add(tagPredicate);
                    return tagPredicateGroup;

How to set task to start on the same day its predecessor ends

I want my tasks with depdencies to start on the same day that its predecessor ends.
This is what I want for example (note differences in bold):
Task 1
Start-Finish Date: 3/3 - 3/5
Task 2
Start-Finish Date: 3/5 - 3/6
Predecessor: Task 1
This is what MS Project sets it as default:
Task 1
Duration: 3/3 - 3/5
Task 2
Duration: 3/6 - 3/7
Predecessor: Task 1
How do I change this? Sorry, the bold doesnt work on this forum (Not sure why MS did this)
MS Project 2013

Hello,<o:p></o:p>
Please change the date format to show time, which will help to show start time and end
time along with dates. You can add time using below steps.<o:p></o:p>
Project 2010/2013: Click on File >> Options >> under general tab select the date format to show date and time<o:p></o:p>
Project 2007: Tools >> Options >> View >> Date Format<o:p></o:p>
By default task start time is 8 AM and end time is 5 PM. So if Task 1 finish date is 3.6 5:00 PM then the next task will start on next day 8 AM.<o:p></o:p>
You can change the duration of task1 to 1.5 days which will help to end the task on 3.6
12:00 PM and then the task2 will start on same day. <o:p></o:p>
I would not recommend changing the start and end date/time for task manually
as doing that will add constraint to the tasks. Instead of that you should change the duration for tasks and let MS Project calculate the dates for tasks.<o:p></o:p>
Hope this helps.<o:p></o:p>
Thank you,<o:p></o:p>
Kiran K.<o:p></o:p>

How to set up 2 agreements for the same From,To,DocType,Version in B2B11g

Similar Messages

Maybe you are looking for