How to set up 81/2 x 11 document to fold to 5 1/2 x 11?

I am so frustrated.... I have worked in Pages before and alwasy seem to figure it out. However, I am stumped on a very easy, thus irritating, problem. I am creating a basic 8 1/2 x 11 Brochure that will be 2 sided and fold to 5 1/2 x 11. I only want page numbers on the inside and not consecutively, as I am setting it up to be printer ready. As part of this new Pages, it appears the simple task of grabbing a layout quide is gone. Am I missing something? Please help?

This is what I wrote some time ago for earlier versions of Pages. It should still work in Pages 5 since the booklet creating is done in another step after creating a PDF.
You'll need to use Create Booklet Service to create a booklet with any number of pages (best in a multiple of 4). You can create the booklet directly from the print dialog after you install the service. For US letter size booklets, I find it best to create them in legal size in a larger font size to make the proportions better. Download the service from the link & run its installer. It will open the booklet in Preview. You will then need to save the new booklet. Don’t just click the Save button. It will save it in a temp folder that is very difficult to find. I just type ⌘ D to go to the Desktop & then I can move the file wherever I choose.

Similar Messages

How to set print option for a Billing document using T-code VF02

Hi All,
Please suggest me the way to set print option for a Billing document for T-code VF02 and please let me know how to get print preview for any particular Billing document?
regards
Anand.

Enter the billing documents detail
Goto Goto> Header>Output.
Check the status for your output type in this screen.
If it is green then come back to the VF03 screen.Enter the billing document number.
Click on Billing document-->Issue output to.
Press (CtrlShiftF1) or click on the icon beside "Print options".
Here you can see the print preview.
If the status is red then click on the processing log.Here you will get the error messages.
If the status is in yellow colour,then click on the "Further Data" button
Set "Dispatch time" as "4 Send immediately (when saving the application)"
Before the print preview option you should make sure you have added correct output type to the relevant billing document. To do that, go to transaction VF02.
Enter the billing document no
Go to Menu option -> Go to -> Header -> Output
In that screen you have to add relevant output type. (Standard output type is RD00)
Add that & press enter key
Highlight that line & press "Further Data" button
Set "Dispatch time" as "4 Send immediately (when saving the application)"
Press "Back" Button
again select that line & go to "Communication method" button
Set "Logical destination" as LOCAL"
Don't mark "Print immediately" & "Release after output" ticks. If you mark them, sa soon as you save the billing document, you'll get a print out.
Press "Back" Button
Save
Now form the initial "Change Billing Document" screen, Go to Menu option; Billing Document -> Issue Output to
You can see that output type line appear.
select that line & press "Print Preview" button or (CTRLSHIFTF1)
You can see the print preview.
Alternatively you can use VF31 to print multiple print outs at same time.
If you want to get PDF outputs of billing documents, go to your printer settings in the your computer from Control Panel.
Set PDF Writer as "Default Printer" (Right click & select "Set as Default Printer")
Then normal way, print the billing from SAP.
It'll automatically send to your PDF writer. You can save it to the path you want,

How to set the root path of XML document when calling Inserting procedure

Hi,
I was create a procedure to insert XML Document in to DBMS Tables, but i am not able to set the Start root element in calling procedure.
My calling procedure is
exec insXmldoc('pmc_sample.xml', 'pmc')
When i am calling this procedure i got this error
11:23:54 Error: ORA-29532: Java call terminated by uncaught Java exception: oracle.xml.sql.OracleXMLSQLException: Start of root element expected.
ORA-06512: at "SYS.DBMS_XMLSAVE", line 65
ORA-06512: at "SCOTT.INSPROC", line 8
ORA-06512: at line 2
I am checking my XML file using XML Validator. My XML file was parsed with out errors.
Please give the solution,and tell me where i did wrong in my calling procedure.
suppose i have this XML file in local E drive ,how to set the path for that XML file in my calling procedure.

Hi, I am doing the code likthis,please give the solution.
SQL> create or replace procedure insProc(xmlDoc IN CLOB, tableName IN VARCHAR2) is
2 insCtx DBMS_XMLSave.ctxType;
3 l_ctx dbms_xmlsave.ctxtype;
4 rows number;
5 begin
6 insCtx := DBMS_XMLSave.newContext(tableName); -- get the context handle
7 rows := DBMS_XMLSave.insertXML(insCtx,xmlDoc); -- this inserts the document
8 DBMS_XMLSave.closeContext(insCtx); -- this closes the handle
9 end;
10 /
Procedure created.
SQL> begin
2 insProc('/usr/tmp/ROWSET.xml', 'emp');
3 end;
4 /
begin
ERROR at line 1:
ORA-29532: Java call terminated by uncaught Java exception: oracle.xml.sql.OracleXMLSQLException:
Start of root element expected.
ORA-06512: at "SYS.DBMS_XMLSAVE", line 65
ORA-06512: at "SCOTT.INSPROC", line 7
ORA-06512: at line 2
Kishore B

How to set the lifetime properties of a document

Hi Experts,
Do somebody know how to set the lifetime attributes "valid from" and "valid to" via java of the lifetime properties?
Which java class should I use?
Do somebody have an example for this issue maybe?
Thanks in advanced!
Best Regards,
Markus

Hi Markus,
Below is a sample method which i am using for setting expiry date for a KM Doc...
public void setTimeBasedPublish(IResource resource) throws WcmException {
          IRepositoryServiceFactory repServiceFactory =
               ResourceFactory.getInstance().getServiceFactory();
          IRepositoryService repositoryService =
               repServiceFactory.getRepositoryService(
                    resource,
                    IWcmConst.TIMEBASED_PUBLISH_SERVICE);
          ITimebasedPublishServiceManager tpbService =
               (ITimebasedPublishServiceManager) repositoryService;
          java.util.Date startDate = new java.util.Date();
          java.util.Date endDate = new java.util.Date();
          endDate.setMinutes(
               startDate.getMinutes()
                    + Integer
                         .valueOf(getproperty("LIFETIME_MINUTES_FOR_LATEST_REPORTS"))
                         .intValue());
          endDate.setDate(
               startDate.getDate()
                    + Integer
                         .valueOf(getproperty("LIFETIME_DAYS_FOR_LATEST_REPORTS"))
                         .intValue());
          tpbService.saveValidDate(resource, startDate);
          tpbService.saveInvalidDate(resource, endDate);
Regards
BP

URM How to set default value in the "New Check-in" - "Folder" field

Hello everyone,
I'm trying to find out how to set the default value for the "folder" field in a check-in profile created using the Configuration Manager. If I browse to the folder in the "Browse Content -> Folders" menu and check-in a file inside the folder, it will fill this field automatically. I need to replicate this behavior using the "New Check-in" drop-down menu and selecting a profile, in other words, associate a Folder with a check-in profile.
I know it was possible to do so in previous versions using the folders_g component, but I'm unable to figure out how to accomplish it with the new FrameworkFolders component.
Any help is greatly appreciated.
Thank you.

Hello,
It is working fine try this.
PARAMETERS :
y_p_list TYPE char32 AS LISTBOX VISIBLE LENGTH 22
                              MODIF ID rsg. .
AT SELECTION-SCREEN ON VALUE-REQUEST FOR y_p_list.
MOVE: text-200 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-203 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-210 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-211 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-204 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-205 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-206 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-207 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-208 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'FIELD'
      dynpprog        = sy-repid
      stepl           = 1
      value           = ' '
      value_org       = 'S'
      display         = ' '
    TABLES
      value_tab       = y_i_listbox[]
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc <> 0.
ENDIF.
REFRESH y_i_listbox.

How to set the HomePage and FolderSize of a managed folder?

Recently, I deside to get the FolderSize and HomePage of a managed folder throw GetFolder operation in EWS, but the FolderSize and the HomePage always not present.
Unfortunately, I could not set these two element directly in Exchange management shell like "StorageQuota".
I tried to create some items in the managed folder, but I also could not get the FolderSize.
How can I do next? Is there anybody know the ways to set the HomePage and FolderSize of a managed folder?

Hi,
We can use the Set-OrganizationConfig -ManagedFolderHomepage command to specify the homepage. To limit the managed folder size, we can use the StorageQuota parameter with the New-ManagedFolder command.
Here is a related article about the Set-OrganizationConfig command for your reference.
Set-OrganizationConfig
http://technet.microsoft.com/en-us/library/aa997443(v=exchg.141).aspx
Best regards,
Belinda
Belinda Ma
TechNet Community Support

How to set water marking in sharepoint 2010 document library

hi,
we have one requirement for Water marking. i have one document library in that document documents is there when downloading documents that time we have set water marking to download document using programmatically

You can check this link:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/180acc9f-b7f2-467a-84e0-db78b2cdf793/how-to-set-a-water-mark-for-a-new-document-uploading-a-document-in-document-libary?forum=sharepointcustomizationlegacy
_eNo_,
Moderator Note: Never propose your own posts as answers. The "Propose as Answer" function is for people to propose the good answers of other people. It is not for self-proposing.

How to set "Created By" field for KD Documents

In our system documents that are entered to the Knowledge Directory are not tagged with who it was that submitted them.
We would like to capture that information but I'm not sure how to enable it (or if its possible).
I've looked at the Global Property Map and don't see a setting for a document, I looked at the Global Document Map but that seems to specifically relay info between the documents meta data and portal properties (which is not what I'm looking to do).
Does anyone know how to attach the portal user in some type of "submitted/created by" field to a document?
Thanks and happy September!

Hello Keshav.T,
Thank you for your information.
Finally, I got an answer from OSS and the following is that.
The popup is shown when there are more than 10 variants exist.
If do not want to have this popup, you can modify the include
LSVARTOP in SE38:
C_VARILIST TYPE I VALUE '10' - maybe change value to '100'
or if you want to have the popup but without the name inside:
change include LSVARE01 and comment the line:
ename-low = sy-uname. append ename. "old
ename-low = sy-uname. append ename. "new
I believe this message might be able to solve my problem.
Thanks again.
BR,
Chris Kim

Urgent: How to set content type on upload depending on target folder?

Hi,
i have to set the content type of a file uploaded via SMB depending on the folder the file is placed in. All files placed below a certain root directory have to be of my custom content type. All others should be stored as documents of type "Document". Is there an easy way to accomplish this task? I can't assume any specific file extensions and can therefore not register my custom content type to that extension.
Any hints are welcome.
Thanks.

Hi,
i have to set the content type of a file uploaded via SMB depending on the folder the file is placed in.All files placed below a certain root directory have to be of my custom content type.
+++ Use an agent to verify the name and extension using the IfsEvent class and EVENTTYPE_CREATEINSTANCE
All others should be stored as documents of type "Document". Is there an easy way to accomplish this task?
+++ Those that aren't your custom content type move to a different folder using the agent.
I can't assume any specific file extensions and can therefore not register my custom content type to that extension.
+++I've found that registering content type only really affects things like how a browser knows what kind of file it's downloading/looking at (mime type) or how a renderer knows how to render it.
Any hints are welcome.
Thanks.

How to set up Adobe Printer to save .pdf in folder

Good morning.
I am looking for guidance on how one can set up a virtual "adobe" printer that saves a print job as a .pdf in a specific shared folder.
Example:
1. External application creates a print job
2. Print job goes to a pre-named, virtual printer.
3. The virtual printer accepts the print job
4. The print job is turned into a .pdf document and the document is saved in a shared folder.
Additionally, can the naming convention of the saved folders be "dynamic"? In this scenario, a print job named "ABC123" is saved as "ABC123.PDF" and another print job named "XXX900" is saved as "XXX900.pdf", etc.
Appreciate the help.
medina

Yes.
Ideally it would be installed on the application server where the job is generated and sent to the specified printer (internal settings). Then when the job hits the printer it drops a .pdf in a shared folder.
Appreciate the help.

Sun IdM: How to set a multi-value field on document.mainform via javascript

The following will set variables.variable1 to variables.variable2 when the "Script Link" component is clicked. I would like to modify
this so that el2 references a multi-valued element (e.g. a list generated by a Select Field)
<Field>
<Display class='Javascript'>
<String>
function myScript() {
el=getElement(document.mainform,"variables.variable1");
el2=getElement(document.mainform,"variables.variable2");
el.value=el2.value;
</String>
</Display>
</Field>
<Field name='Script Link'>
<Display class='Link'>
<Property name='URL'>
<String>javascript:myScript();submitCommand(document.mainform,%20'Recalculate');</String>
</Property>
</Display>
</Field>
My issue is, if variables.variable2 is a list / multivalued, i get errors trying to traverse through the "array".
How can i read and set a list element via the javascript function above? I've tried things like get(), put() , as well
as path expressions like variables.variable2[0] .
any help would be appreciated....
is there an API somewhere i can reference?

The MultiSelect field-type is a little different than the rest of the fields. If you use the applet version, then selecting/deselecting values cannot be captured by referencing the field directly in javascript.
The way to identify the selections is to use the javascript methods includes/MultiSelect.js file (IDM form submission uses the same method):
fixMultiSelectAppletBeforeSubmit( )
fixMultiSelectNonAppletBeforeSubmit( )
.. and then referencing the "<multiselect-field>_selected" form element.
So in your case, the code should look something like this:
function myScript() {
    fixMultiSelectAppletBeforeSubmit(document.mainform,"variables.variable1");
    var el1 = getElement(document.mainform,"variables.variable1_selected");
    // assign the value to variable2..
    el2 = getElement(document.mainform,"variables.variable2");
    el2.value = el1.value;
}Just make sure ":variables.variable2" is not a multi-select field, else the value set here will be reset during form submission.
Adi
[www.xpressutils.com|http://www.xpressutils.com]

How to set the language key in Sales document header text?

Hi Guys,
When I am creating a sales order I found in the header text tab only three languages English, Thai and Ukranian are mentained.. So can you please tell me how to add/ delete more language keys in language key field in a step by step process???
Thanx and regards,
JEET

Just select the "unwanted language" keys (By 'right clicking') on each & then use the "delete" icon (3rd icon) on the bottom half.
you can also manintain as many languages as you want.
Pls do the needful.
Rgds
Sumanth.Gururaj
Edited by: SUMANTH GURURAJ on Jan 21, 2011 6:21 PM

How to set different margins for a single document?

Hello,
I'm creating a Pages document that will be exported to PDF.
On text pages I need to set margins on all sides, but for photo pages I want the margins completely removed.
What would be the best way to do this?

The best way would be to choose either *Layout mode* which is free form layout except for headers and footers, or to use *Word Processing* mode but make all your Photos in Floating imageboxes which can be placed wherever you like.
see p132 of the Pages09_UserGuide.pdf downloadable from under the Help menu.
Peter

How to set the encoding of an XML-document

I need to change the encoding of an xml-document.
When I convert the document into a string, UTF-8
is used, I want to use ISO-8859-1.

use this in your identity transform:
transformer.setOutputProperty(OutputKeys.ENCODING, "ISO-8859-1");

How do you set a password for a text document

I was wondering, does anyone know how to set a password for a text document for example, if you have your passwords saved on a text document, how can you get a password to retreive them.

How about Dashcrypt?
http://www.dashboardwidgets.com/showcase/details.php?wid=588

How to set up 81/2 x 11 document to fold to 5 1/2 x 11?

Similar Messages

Maybe you are looking for