How to Set up a Belkin F1UP0001 wireless print server in TIGER?

Hi,
I've been trying to make HP Laserjet 1220 work with Mac, it works in Windows 2000, but when i downloaded the universal/binary driver at HP website the printer is not working, so i decided to attached my old printer server :(( and i dont know how to do it, the belkin server could actually communicate with MAc since it printed an information about IP addresses...
Also, there anyway that i cold get teh proper printer driver for HP laserjet 1220?
Your reply could actually make my life easier, i've been trying to fix these for a week already.
Ciao!

Thanks for the reply.
Sorry but I am a bit of a network novice. In all the literature from apple re timecapsule setup it shows that you connect Lan from modem to Wan on Timecapsule. Why do you suggest connecting Lan to Lan? Can I not disable router function of Belkin modem and use Timecapsule as router?
Thanks.

Similar Messages

  • Wireless print server setup

    Have an HP 2355 which was hooked up local to Mac G5 10.4.10. Wanted to allow windows laptops to print to HP so set up 2355 with Linksys wireless print server. Windows PC's find server and print but G5 doesn't. Where can i get some general direction (thats not too technical) as to how to link the G5 to the print server? Thanks in advance. Sorry, I'm a novice at this stuff.

    You need two things -
    First, the HP-provided driver (on OS X) was written to only support direct USB printing, so you need a CUPS driver. Check here to find that and install it:
    http://www.linux-foundation.org/en/OpenPrinting/macosx
    (click on "printers" in the blue bar and look up your printer.)
    Next, you need to read your print server manual and figure out what comm protocols are supported and then enter the right info into the Add printer dialog. For example, the print server's queue name (also called port name) is a required entry (not default) for the IP > LPD and IPP protocols. If the print server supports TCP/IP raw or port 9100 or socket printing, those terms are all equal to the IP > HP Jetdirect protocol on OS X. That protocol doesn't need a queue name, so it's usually easier for Mac users. I think L1 or P1 are typical queue names on Linksys servers.
    If you need more help, I need to know the print server model #.

  • How to set up standalone wireless print server

    I need step-by-step instructions on to set up a KonicaMinolta bizhub multifunction printer to print wirelessly from various Macs. In other words, it would not be hooked up to the internet or my wireless network. I understand this can be done with an AirPort Express or AirPort Extreme. I tried it with a Linksys WPSM54G wireless print server without success. I'd like to try the AirPort Express, but so far haven't been able to get it to work.
    How do I configure my AExp to operate as a print server? How should I have it connected when I do the configuration?
    How do I find the print server's IP address?
    When I plug in the AExp and connect it to the printer via USB, the AExp flashes amber and never turns green (and therefore never connects with the MacBook).
    If I successfully set up the print server as a separate network, can I be connected to the printer and my wireless network at the same time? Or do I need to switch back and forth?
    If I'm accessing the internet via Ethernet, can I simultaneously access the printer via AirPort?
    Any help will be greatly appreciated.

    How do I configure my AExp to operate as a print server?
    The AirPort Express Base Station (AX) or AirPort Extreme Base Station (AEBS) can only operate as a "print" server if the printer is attached to its USB port. Ethernet printers would require their own print server service if connected by Ethernet to either router.
    How should I have it connected when I do the configuration?
    Neither router would need a WAN port connection as both can provide a stand-alone wireless network. For a USB printer, it would need to be connected to the respective router's USB port.
    How do I find the print server's IP address?
    This would be the AirPort's LAN IP address. The default is: 10.0.1.1
    When I plug in the AExp and connect it to the printer via USB, the AExp flashes amber and never turns green (and therefore never connects with the MacBook).
    The flashing amber indicates that the AX has configuration issue. If you temporarily connect your MacBook directly to the AX's Ethernet port, and then, run the AirPort Utility, you can find out what the issue(s) is(are).
    If I successfully set up the print server as a separate network, can I be connected to the printer and my wireless network at the same time? Or do I need to switch back and forth?
    No, you would have to switch wireless networks. One way around this, is to have the AX configured to "Join a wireless network." This mode was specifically designed to allow the AX to perform as a wireless client and simultaneously provide both print sharing and iTunes streaming to network clients.
    If I'm accessing the internet via Ethernet, can I simultaneously access the printer via AirPort?
    Potentially, but your computer and the printer will be on separate broadcast domains/subnets.

  • Printing via Belkin Wireless Print Server

    I am trying to setup my my mac so that it will print via my belkin wireless print server. I have been able to do this for my windows pc's but not with my mac.
    Other threads on this forum have been able to get it working with other printers but I can't seem to make it work.
    I'm using a HP Deskjet 6540 on a 802.11g network. The printer is connected to a Belkin Wireless Print Server (F1UP0001). I print when connected via USB but not via wireless. I've installed the HP drivers and the GIMP drivers but that hasnt worked. When I go to install the printer I choose IP Printer and give the ip address of the print server.
    Any help would be much appreciated, if you need more infomation just ask.
    Thank You,
    mholmau

    Your printer is a non-postscript printer and requires a CUPS driver in order to use the network printing protocols which are part of the CUPS system in OS X. Except for Brother, no manufacturer of non-postscript printers is providing CUPS drivers. The printer model doesn't show up because the OS X driver only works for USB. Apple tried to get around this by including open source Gimp-Print (CUPS) drivers with OS X. But very few HPs are supported. You should try HP Deskjet 900 Series, Gimp-Print driver to see if it "might" work.
    For PPC Macs, there is another open source driver set that supports most HPs, including yours:
    http://www.linuxprinting.org/macosx/hpijs/
    But, these aren't Universal binaries, so they don't work on Intel Macs. The source code is available, and I think it will readily compile on your Mac, but I don't have an Intel Mac to try that on.
    Next issue - print server setup. We don't have auto-setup software, so we have to read the manual closely and decide which protocol to use. If it's IPP (=internet printing protocol, not IP printing) or LPR/LPD, you need to find the print server's queue name (sometimes called port name), and enter that in Add printer dialog near IP address.
    There are other ways to do network printing. The Airport Express print server from Apple allows you to use the USB driver because it uses Airport-Bonjour software to redirect USB output, instead of using standard protocols.
    Hope this helps.

  • Sharing Linksys Wireless Print Server with MAC and PC - How to do?

    I have lost the capability to share a printer on my network by using the Linksys Wireless Print Server-model number WPS54G -V2. Prior to having to return my previous Print Server on an RMA, I was able to use the MAC and PCs on my network. I have a PowerGook G4 with MacOS X 10.4.10. I also have a Airport Extreme Base Station V5.6. The printer on the network that is being shared is an Epson Stylus Photo 820. Recently, when trying to reconfigure the network, I updated the software on the Airport Extreme...so I think after that, I am no longer able to share this printer using current network configuration. As information, I will share how I got the network to share the printer BEFORE I had to replace the previous Print Server and BEFORE I updated the Airport Extreme. Please see this link:
    http://www.macosxhints.com/article.php?story=20050406151311940
    Even though this was for a different type of Print Server, this worked for me.
    When reconfiguring the new Print Server, I contacted Linksys...as had some difficulty until I found out how to assign a static IP to the new Print Server. When trying to talk to them about the Mac issue, and sharing the printer, they shared this link with me...which may be helpful to some, but I found that this does not work for me...
    http://www.macosxhints.com/article.php?story=20060404021600193
    I have been trying to work through the issue, but feel I may now have some compatibility issues between the Airport Extreme and the Epson printer.
    Further details are that I use 10.0.1.78 for the assigned IP address for the Print server. My router (which is the Airport address) is 10.0.1.1. I have tried IPP printing option, LPD printing option...and IPP printing at least returns a status on the Print Server as "printing" as opposed to "idle". I have checked the Print status on the Mac, and I have received two (2) different error messages as to why the print job failed. They are:
    "the process "picwpstops" stopped unexpectedly with status 1"
    and
    "the process "rastertoprinter" stopped unexpectedly with status 1"
    The latter happens when I follow the instructions on the second link I attached on this topic...with the only change being that I select IPP printing as opposed to LPD printing.
    Anyone that has any insight into HOW to configure the mysterious settings for Mac OS printing so that it can be compatible with a Wireless Print Server, please feel free to comment. In the meantime, I am thinking that the links above could help some people...just not me at this point given my current configuration and versions of software/firmware and perhaps the printer I am using.
    Greatly appreciate your consideration, and any suggestions to anyone that might understand what these error messages mean when checking the printer status after sending a file for printing.
    Thank you

    1. No, you don't have to make a bootable clone.
    2. If you use the drive for a bootable backup, then you cannot use the drive for other types of storage unless you partition the drive and make more than one volume.
    3. No, it will not try to boot the computer. You must designate the startup volume using Startup Disk preferences.
    If you wish to use the drive on both a Mac and a PC, then either you make two partitions - one for Mac and the other for the PC or you must format the entire drive using FAT32 so the drive can be used for read//write by both operating systems. If you do this then you cannot use the drive for a bootable backup nor can you use it with Time Machine.
    FAT32 is slower for read/write on the Mac than using Mac formatting.
    Optimally, I would suggest you partition the drive into two volumes. One volume formatted for the Mac and the other formatted FAT32.
    You can send files from a PC to a Mac and vice-versa using File Sharing. Select Mac Help from the Finder's Help menu and search for "file sharing" or "sharing" to find help articles. Also see,
    Mac OS X 10.5 Help- Setting up a Mac computer to share files with Windows users
    Mac OS X 10.5 Help- Setting up a Windows computer to share files with Mac users
    Mac OS X 10.5 Help- Sharing with Windows computers

  • IP Printing to Belkin Wireless Print Server

    Hi Guys
    Ok, I wonder if anyone can point me in the right direction. I am a windows user (groan!, get a proper computer, yes, I know. lol lol) But trying to set up a simple network consisting of three pcs, one laptop all running windows xp/vista and one IBook. Not the best on macs but can find my way round!! All works Ok as far as seeing each other on the network and communicating/internet etc. Have introduced Belkin wireless print server to network and all ok for windows regarding printing wirelessly over the network. However, the IBook I set up as IP printing and set the appropriate address in the ibook printer setup screen. But when printing from the IBook it says the print has gone but it is actually stuck in the queue and never prints. Can anyone help with what may be a simple entry in the setup or is it some black magic IBook setting that evades us windows users??
    All help will be gratefully received and promise to look at conversion!!
    Thanks in anticipation of help..........

    Hello,
    Just a heads up, you ended up in the iPhone forums!
    Go to http://discussions.apple.com/index.jspa
    Click on iBook & post in there to get some help.
    Good luck!!
    -CG

  • IBook printing with Belkin Wireless Print Server

    Hi Guys
    Ok, I wonder if anyone can point me in the right direction. I am a windows user (groan!, get a proper computer, yes, I know. lol lol) But trying to set up a simple network consisting of three pcs, one laptop all running windows xp/vista and one IBook. Not the best on macs but can find my way round!! All works Ok as far as seeing each other on the network and communicating/internet etc. Have introduced Belkin wireless print server to network and all ok for windows regarding printing wirelessly over the network. However, the IBook I set up as IP printing and set the appropriate address in the ibook printer setup screen. But when printing from the IBook it says the print has gone but it is actually stuck in the queue and never prints. Can anyone help with what may be a simple entry in the setup or is it some black magic IBook setting that evades us windows users??
    All help will be gratefully received and promise to look at conversion!!
    Thanks in anticipation of help..........

    Your printer is a non-postscript printer and requires a CUPS driver in order to use the network printing protocols which are part of the CUPS system in OS X. Except for Brother, no manufacturer of non-postscript printers is providing CUPS drivers. The printer model doesn't show up because the OS X driver only works for USB. Apple tried to get around this by including open source Gimp-Print (CUPS) drivers with OS X. But very few HPs are supported. You should try HP Deskjet 900 Series, Gimp-Print driver to see if it "might" work.
    For PPC Macs, there is another open source driver set that supports most HPs, including yours:
    http://www.linuxprinting.org/macosx/hpijs/
    But, these aren't Universal binaries, so they don't work on Intel Macs. The source code is available, and I think it will readily compile on your Mac, but I don't have an Intel Mac to try that on.
    Next issue - print server setup. We don't have auto-setup software, so we have to read the manual closely and decide which protocol to use. If it's IPP (=internet printing protocol, not IP printing) or LPR/LPD, you need to find the print server's queue name (sometimes called port name), and enter that in Add printer dialog near IP address.
    There are other ways to do network printing. The Airport Express print server from Apple allows you to use the USB driver because it uses Airport-Bonjour software to redirect USB output, instead of using standard protocols.
    Hope this helps.

  • HP C309a set-up with wireless print server

    My HP C309a wireless radio no longer seems to work (run diagnostics, reset to factor defaults, etc, over and over without luck), so now I'm trying to set it up with a Linksys Wireless-G print server (WPS54G).  I've gone thru all of the linksys print server set-up steps, but the wireless connection fails.  I turned off the wireless radio on the printer, but are there other steps I need to take to get the wireless print server to work with this printer?  Thanks.

    Have you reset the printer - turn it off, hold # and 6 keys while turning back on.  This can sometimes reset the wireless radio....sometimes not.
    Honestly, I don't know a lot about wireless print servers other than they are hard to set up and its best if the server and your router are made by the same company - and that they usually only support printing.
    Another off the wall option is to use powerline Ethernet (google it).  This uses the power lines in your home to transmit Ethernet signals.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Airport Express questions on wireless print serving

    I have a wireless network setup using a linksys router and thinking about using an Airport Express as a wireless print server in another room. I currently have a Canon MP500, 2 wired PCs connected to the router and 2 wireless laptops one Windows and an iBook. Would the Airport Express connect to my existing wireless network to act as a wireless print server for my network?
    Thank you
    PCs running Windows XP Pro and iBook is running OS X Tiger

    Hi, does anyone know how to change the port setting on Windows XP Pro. I recently purchased an Airport extreme and the network is working great, however when I tried to set up the printer the documentation left some key peices of information out.
    I had followed the step for installing a printer, but when I got to the point about specifing the adapter type, the documentation in the manual that came with the Airport skipped over that part. I guessed at the adapter and unfortunatly (and obviously after reading the instructions here http://www.ifelix.co.uk/tech/1008.html) I chose the wrong adapter. Now I want to go back and fix it but I can't figure out how. When I tried to run the add printer wizard again and the port setting wizard it said the port (IP_10.0.1.1) was alread in use and kicked me out of the wizard.
    How do I change the settings on the port to the correct settings?
    Thanks
    Dell laptop   Windows XP Pro  

  • Wireless Print Server and Macintosh

    Hello:
    I am using a Linksys Wireless Print Server WPS54GU2. I have a HP LaserJet 1012 printer hooked up to it. i have a iMac and a Dell Windows PC. From the dell Windows PC, the wireless printing is working fine to the laserjet, however i just bought my mac and i am trying to setup the printing but it is not working.
    When i connect the printer directly to the mac through USB, it prints fine. However when I connect to through the print server wirelessly, i can see the printer through Applettalk and it does a test print (but it prints garbage). The problem that i see is that the drivers for HP LaserJet 1012 are not listed under the HP Model. So not sure what i need to do.
    Also, how do i print to a printer which is shared by a Windows machine?
    Has anyone got any direction?
    Thanks

    HP wrote the OS X driver so that it ONLY works with USB. To get network printing, install the hpijs and ESP ghostscript driver "set:"
    http://www.linuxprinting.org/macosx/hpijs/
    Add the printer via LPD or IPP (look through server manual), and be sure to enter the server's queue name, L1 or P1.
    Follow this guide to print via Windows:
    http://www.ifelix.co.uk/tech/3015.html

  • Using a wireless print server... help!

    Hi. I have a G5 on a wireless network using a LinkSys WRT-54G router. I just got a wireless print server (D-Link DPR-1260) and want to network my HP 6110xi All-in-one printer. 6110 drivers are installed, and printer previously worked fine when connected directly to computer via USB port.
    Now, I want to share it over the wireless network. I believe I have the print server correctly configured... just not sure how to configure my G5 to print across the network to this printer. How do I set it up?
    Particulars:
    - LinkSys WRT-54G, 802.11g wireless router, firmware v4.20.7 (192.168.0.1)
    - D-Link DPR-1260, wireless print server, firmware v1.00 (192.168.0.10, static)
    - HP 6110xi All in One, latest drivers from HP downloaded and installed.
    - iMac G5, (192.168.0.100, dynamic IP)
    Thanks for any help provided. Regards.

    Hi JD77!
    And Welcome to Apple Discussions
    You have 2 computers respectively connected each to a printer.
    DSL Modem (ethernet)
    ||
    PC1 = Printer1 (USB) (Win)
    PC2 =Printer2 (USB) (iMac)
    PC3 WIFI WinXP laptop
    The iMac has built-in Bonjour technology. So use that. If your windows PC has XP you can download Bonjour for that one as well and use that to share your printer.
    What you can do is use the Airport Express and connect it to a USB printer. Make sure that it is compatible printer.
    Here are some articles you can read:
    AirPort Express: How to join an existing wireless network in client mode
    Windows printer for AirPort Extreme and AirPort Express
    Bonjour for Windows 1.0.3
    AirPort Express (FAQ)
    Hope this helps

  • Printing to a Linksys Wireless Print Server with my MAC

    have a small home network using an ATT DSL modem-router. I have several PCs hardwired to the router and 1 older MAC wireless. I have a MAC G4 laptop and a Dell laptop (my wife's) also connected wirelessly and all work well. I have added a Linksys wireless print server today and am able to get my wife's laptop to print easily and reliable as does the hardwired Dell. What I need is to get my MAC laptop to print wirelessly as well. I have tried all the options in the printer set-up but it does not see the print server. Linksys does not support MAC and there are no MAC drivers for the print server to download that I know of. Does anyone know of a fix on how I could configure this equipment so I can print wirelessly from my MAC laptop. Or perhaps bypass the print server and print using the modem-router and the same printer. I would appreciate any suggestions one could lend. Thanks much.
    Power Book G4 17" Mac OS X (10.4.10) Virtual PC capable

    Looking at figure 8-5 and the text to its left in the User Guide.
    Click Add in Printer Setup, then select IP printer > IPP. Enter the print server's IP address AND queue name P1. With that info filled in OS X has all it needs to address the printer on the print server.
    Download and install the CUPS driver version 1.1.0, and choose it when you Add in Printer Setup.

  • Wireless Print Server

    I have a BTHub 3 connecting two wireless home PCs, all working well.
    I would like to add a shared printer (HP LaserJet P2055d)
    It is not possible to locate the printer with the BTHub3 and make use of the USB port.
    I am looking at using a TP-Link Wireless Print Server but unsure if this is feasable and if so how to set it up

    Hi PeterDee,
    Welcome to the forum and thanks for posting. None of the versions of the BT Home Hub are designed to act as a print server. Connecting a printer to the USB socket won't work, and we don't support this. Some people claim that they've managed to share printers in this way. But the success might be specific to their printer and the Hub just doesn't support this feature. You might have better luck with the TP-Link Wireless print server. Let us know how you get on.
    Cheers
    David
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • Wireless print server with Mac G4 and Dell PC's

    I have a belkin wireless router and a linksys WPS54G print server. Hardwired by ethernet cables to the router are two computers 1) Dell 2400 and 2) Apple G4.
    I am trying to get the Apple to print to the printserver. the linksys software set the Dell up and the print server and they work fine. I have tried everything i can on the Apple but no luck. Seems to be the driver. The printer is printing gibberish from the mac. The printer is an Epson Stylus Photo R320. I dowmloaded the drivers for Mac OS 10.4.4... from the epson website - I chose each one for the printer on my MAC and tried to print. The result was either no print out or differing gibberish each time. What can I do?

    Please search this forum. Your precise issue has been covered several times. You have to use a CUPS driver for network printing - Epson's drivers are Carbon, not CUPS. Start by updating the Gimp-Print drivers that Apple included in OS X to the next newer version, now called Gutenprint 5.0.0:
    http://sourceforge.net/project/showfiles.php?group_id=1537

  • Trying to install a Linksys WPS54GU2 wireless printer server with a Actiontec M1424WR router

    Been trying to get the install software to "see" the router and never get past that.  Have reset router and followed the cabling instructions but never get the installation software to list the server

    You can try performing the setup manually. The Print Server device, if I'm not mistaken should have a web-browser configuration page you can tap into. It isn't as "simple" as a wizard should be, but it will rule out any issues relating to network discovery. Log into the ActionTec at http://192.168.1.1/ and see if you can locate the IP Address the Print Server is holding to the network. If you enter that address into your Web Browser, a configuration page should appear where you can enter in the Wireless settings manually, and continue on with following the installation steps outlined here: http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=59c0e1ff7adc408094106...
    Since the Print server is supposed to support TCP/IP/SMB/Apple, setting up the Printer address should be nothing more than a matter of telling the computer to look for the Printer at a specific IP address/hostname. If you want a guide on how to do all of this, I'll gladly type one up. Before you disconnect the server from the Wired network and switch it over to Wireless, ensure your PCs can at least send jobs to the attached printer. If that's all set, then it's a matter of ensuring any printing-related settings on the PCs carry over on the switch to Wireless. Any issues with printing to the server (when it is on and pingable) would be due to an over-agressive firewall installed on a PC or due to a software (probably driver-related) issue that does not pertain to the print server.
    I strongly suggest setting a Static IP on the Printer server, as an FYI. Hostnames can get iffy sometimes.
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

Maybe you are looking for