How to set up a password or security using wireless g broadband router wrt54g

Hello Everyone I have had my router for a while and a friend mentioned I should password protect my connection so other people can't lech off of my wireless connection. My roter is installed and connected to my main office computer and I only bought it so i could use my laptop around the house. Everytime I go to profile then secuirty settings and try to imput any password and hit ok. Well after I connect to my wireless profile it comes up with my router has no secuirty turned on at this point. Yet I read from many sites that my router which is model wrt54g has secuirty features. Could someone please help me figure out how to password protect my wireless connection. THank you

Hit there exiledone1!
If there'd be any computer which is working through the router, you could get into the router's User Interface without any problems then. You need to get to this page so that you'd be able to do necessary changes on it's wireless settings.
http://192.168.1.1 would be the address, type this on the Address Bar of your Internet Explorer browser or Mozilla Firefox browser. If you'll be prompted for a login page, simply leave the username blank (or don't write anything on it) and your password would be admin. You'll be able to see the Wireless Tab once you'll be inside the page and below the Wireless Tab would be subtabs and one of them is Wireless Security. Just click on Wireless Security and you can choose WPA for your Security Mode. Just type in anything right on the WPA Pre-shared key field and this will then serve as your wireless password (a.k.a network key). Just make sure the length of the key would not be less than the count of 8 characters.

Similar Messages

  • HT3728 after soft resetting how to set a new password to my airport express

    after soft resetting the airport exppress how to set a new password to my airport express

    Hello, MevanK.
    Thank you for the question.  You may find this article helpful in changing or creating a password for your AirPort Express. 
    AirPort Utility 6.x: Password-protect your wireless network
    http://support.apple.com/kb/PH5119
    Cheers,
    Jason H. 

  • How to set username and password at line vty 0 4?

    hi guys,
    would like to know how i can set username and password so when i telnet to the router, i can login as username and password..?
    thks,
    ken

    Hi,
    for a simple telnet password with user name & password, find the steps below,
    aaa new-model
    username password
    line vty 0 4
    password
    login local
    if you wanted different types of users to login with different privilagez,do the following
    username privilege 15 password
    username privilege 5 password
    privilege exec level 15 conf t
    privilege exec level 5 show
    line vty 0 4
    password
    login local
    in the above statement "privilege exec level 15 "will have full access, "privilege exec level 5" will have the limited like "show" related
    hope this helps.
    rate this post if cleared.

  • How can i get my password and security questions back? everytime i write my mail in iForgot it doesnt send the mail to  my account, why? someone hacked me but i dont know how.

    how can i get my password and security questions back? everytime i write my mail in iForgot it doesnt send the mail to  my account, why? someone hacked me but i dont know how.
    example;
    my apple mail: [email protected]
    and i write down the account in iForgot [email protected] but i never recieve the mail asking for the new password, why? someone hacked me and change that and the security questions, what can i do?

    Alternatives for Help Resetting Security Questions and Rescue Mail
         1. Apple ID- All about Apple ID security questions.
         2. Rescue email address and how to reset Apple ID security questions
         3. Apple ID- Contacting Apple for help with Apple ID account security.
         4. Fill out and submit this form. Select the topic, Account Security.
         5.  Call Apple Customer Service: Contacting Apple for support in your
              country and ask to speak to Account Security.
    How to Manage your Apple ID: Manage My Apple ID

  • HT4061 how do I set up my iPhone5 voice mail. I haven't set up a password, yet it tells me my password is incorrect. I don't know how to set up a password.

    how do I set up my iPhone5 voice mail? I haven't set up a password, yet it tells me my password is incorrect. I don't know how to set up a password.
    I purchased the phone in a retail store a few days ago. Am trying to avoid making an appointment and going back.  The purchase took 3 hours.

    Have you got Settings > General > Restrictions > In-App Purchases set 'off' - that should stop all in-app purchases. And what have you got 'Require Password' set to on the Restrictions screen (I can't remember what version of iOS that setting came in with, so you may not have it) ?

  • I signed up yesterday with synch. I dont know my password and I need it to reset a new password. Please advise how to set a new password when I dont know old 1

    I signed up yesterday with synch. I don't know my password and I need it to reset a new password. Please advise how to set a new password when I dont know old 1
    I set it up on my "upstairs computer" and then came to my "downstairs computer" to synch and I can not get into the account because of the above password problem. I write down my passwords. I must have mistyped it or mis written.
    I want to change my password

    The new Sync version uses the Firefox account and stores the login data (username/email and password) under the https://accounts.firefox.com site heading in the Password Manager and use the signedInUser.json file in the profile folder to store the credentials once connected to the account to avoid having to enter the master password on each start.

  • How do I migrate the passwords from secured pdfs/their profiles to a new computer and new version of

    how do I migrate the passwords from secured pdfs/their profiles to a new computer and new version of acrobat?  I lost one computer that had standard 9, went to new computer, then upgraded to XI.  All my password profiles are not coming through.  How do I get them back?

    There is also a program called Senuti that I used when I had a PC crash with all my iTunes stuff on it:
    www.fadingred.com/Senuti

  • How to set up the airport express with a linksys wireless-g broadband router

    I need to know if and how to set up an airport express to use to extend a home wi-fi network. I have AT&T service with a 2WIRE modem. I am using a Linksys wireless-G broadband router. I also have the new Macbook Air notebook. The airport express keeps giving me a blinking amber light even when the ethernet cable (from the modem) connected. Please let me know how to set up an extended wifi network using this system. Any help would be appreciated.

    If that is all that is done, the Express would not provide more wireless coverage.  Instead, it would duplicate the coverage provided by the Linksys and there would be two WiFi systems covering approximately the same area.  As per my above comment, one Express connects via Ethernet to the Linksys.  The second Express provides the extension.
    You must have misunderstood what I was saying.
    Linksys is providing a wireless network.
    The Express is connected to one of the LAN ports on the Linksys router using a long Ethernet cable (or Ethernet powerline adapters)
    The Express is located on the other side of the house, for example.
    The Express is configured to create a wireless network using the same wireless network name, security and password as the Linksys router
    The Express is configured in Bridge Mode
    This has worked quite well for me for years. Computers "switch" from one wireless access point to another smoothly and automatically while they move around the house.
    Although this is an "extended" network, it is technically known as a "roaming" network.
    This is what I was suggesting as a possible alternative without having to buy more hardware.

  • How to set a variable in portal session using web dynpro java.

    Hi,
    I have created a web dynpro application, which is running inside portal. I have created a role called "R1". Inside role R1, i have created 3 workset W1, W2 and W3. and inside each workset i have some pages and iviews.
    My requirement is when user logins to the portal , and when he clicks on role R1 for the first time, a login page should come (so that we can do revalidation), and when he enters his password again in that login page , then only workset W1, W2 and W3 should be visible/accessible to him and after successful revalidation, if he clicks again on role R1, in that particular portal session, than that login page should not come.
    for this, i thought i will set a variable in portal session, whenever user successfully revalidated himself, and if after successful revalidation he clicks again on role R1, i will check in doinit method of webdynpro whether variable is set or not (which i already set on successful revalidation), and if it is set then i will do Donavigation else i will present login page to the user.
    Can anyone tells me how to set a variable in portal session using web dynpro java.
    thanks
    Arush

    Hi,
    Try this:
    WDScopeUtil.put(WDScopeType.CLIENTSESSION_SCOPE, key, value)
    WDScopeUtil.get(WDScopeType.CLIENTSESSION_SCOPE, key)
    Ex:
    WDScopeUtil.put(WDScopeType.CLIENTSESSION_SCOPE,"Key1","Value1");
    String value1=WDScopeUtil.get(WDScopeType.CLIENTSESSION_SCOPE,"Key1").toString();
    /people/william.cui/blog/2007/02/12/sharing-session-context-between-parent-and-external-windows-running-on-same-host
    Regards,
    Charan

  • How to set fetchsize of sql Query when using Database Adapter.

    Hi All,
    I am using DatabaseAdapter to connect to database and retriving huge amount of data.For improvement in the performance I want to set the "fetchsize" of sql query. I know fetchsize can be preset in Java using Jdbc 2.0 API.Please let me know how to set this value in BPEL when using DBAdapter?
    Thanks
    Chandra

    I talked to the developer of the db adapter - and he told me this feature will be available in BPEL PM 10.1.3 (which is supposed to be production later this year, and a public beta soon). If this is an emergency I would recommend going throug Oracle support and have them file an enhancement for 10.1.2.0.2
    hth clemens

  • How to crate new user in adf security using jspx page

    how to crate new user in adf security using code in java file.plz help me this work will submited to day plz help me...

    sigh
    Search really would help and point you in the right direction. You'd find [url http://forums.oracle.com/forums/thread.jspa?messageID=4584464]this, for example.

  • How to set value for trim and bleed using jsx script?

    I have tried using bleedoffsetRect but somehow it is not working. Can anybody please help me on how to set value for trim and bleed using jsx script? Any example will be highly appreciated.
    Following is the code I am trying with:
    var _saveName = new File ( root_path +_strFileName+".pdf");
        var _saveOpts = new PDFSaveOptions();
        _saveOpts.printerResolution = 300; 
        var bleedarray = new Array();
         bleedarray[0] =9.00;
         bleedarray[1]=9.00;
         bleedarray[2]=9.00;
         bleedarray[3]=9.00;    
        _saveOpts.bleedOffsetRect = bleedarray;

    I would expect although I've not actually tried this for the bleed off set box to be larger than the artbaord and the first two values to be negative or 0…
    var bleedarray = new Array(-9,-9,artboard.width+9,artboard.height+9);
    Where 'artboard.width' & 'artboard.height' you will have calculated from your file. An Array(9,9,9,9); would not constitute any boxes bounds.

  • How to set request number of info package using start routine

    Hi All,
    I have a specific requirement in which I need to upload only selective request nos from PSA to DSO.
    Any one can suggest how to set request number of info package using start routine or any other mode so that only selective request should proceed using DTP?
    Thanks
    Sangita

    You'll probably want to do this in a start routine.  It is probably not advisable to hard-code the technical name of the InfoPak.  They seem to remain the same upon transport, unlike DTP technical names which are locally generated.
    I would do a SQL select like this in a start routine, and then filter based on the results of the SQL.  You'll probably want to sort the results by date and time, both descending.  Or do a MAX in the SQL.
    Please let me know if this isn't clear.
    select q~rnr q~logdpid q~tdatum q~tuzeit
    from rsreqdone as q
      inner join rsldpio as p
        on p~logdpid = q~logdpid
    where p~objvers = 'A'
    and p~logdpid like 'ZPAK%'
    and p~source = 'your data source'

  • How to set default value of a table using sequence number

    Dear all,
    Does any body know that how to set default value of a table
    using sequence number.
    But I don't want to use trigger to do that.
    Please help!!!!
    Eldon

    Andrew is essentially correct. You can get around the trigger,
    but not the sequence, if (and this may be a very big if) you can
    guarantee that every time an insert is done into the table, from
    whatever source, the statement looks something like
    INSERT INTO tbl VALUES (sequence.nextval,other_columns_values)

  • HT2534 I followed the instructions on how to set up an Apple ID without using a creditcard or iTunes card many times on several devices, but I still do not get the NONE option on the billing page. Please help??

    I followed the instructions on how to set up an Apple ID without using a creditcard or iTunes card many times on several devices, but I still do not get the NONE option on the billing page. Please help??

    Follow the steps on this page when creating a new account http://support.apple.com/kb/HT2534
    e.g. if using a computer's iTunes : https://discussions.apple.com/message/24321860
    If you've already created an account and are being prompted to review it when trying to see it then you could see if this post by mountaingoatgirl lets you do so without needing to enter credit card details : https://discussions.apple.com/message/24303054

Maybe you are looking for

  • Using Apple TV 2 to replace Sonos- speaker recommendations?

    I purchased a Sonos Play:3 last week, but am considering returning it because, although it sounds nice, the integration with iTunes is weaker than I thought: 1) To play music from iTunes, you either have to have a computer on with iTunes running or a

  • Getting an error while changing a tag in an XML file

    Hi, When I am trying to replace the existing XML tag with other one I am getting the following exception: org.w3c.dom.DOMException: NOT_FOUND_ERR: An attempt is made to reference a node in a context where it does not exist. at org.apache.xerces.dom.P

  • OHD - Logical File Name

    Hello all, I have a question about using a logical file name in an OHD (BI 7.0).  Because we need to transport the OHD to a different server, we cannot use the File option in defining the OHD.  We need to use the option, Logical File.  In t-Code FILE

  • S-video-ou​t cable ??

    Hi guys . I have an hp pavilion  dv4000 and I want to connect it to a regular tv by S-Video-out cable .  I bought a S-Video-out cable and hooked  it up with the tv and my laptop . The tv  won't display my laptop desktop screen ?? Help   .

  • Getting ftp error message. Can't find remote host

    I'm using this for three websites. All the same user and pw. Tried everything. BTW, don't laugh, still using CS3. About to upgrade but having to learn how to import settings. Never done that before. Why would my other websites work, but not this one?