How to set up a RSS channel via portal

Hi,
I know this question is very simple to some but I am a newbie. But I know that we need to use the xml channel to create a rss channel. I am trying to use the swforum rss channel as my example. But where do I find the info for the xslFileName and where to put it?
A step by step will be appreciative.

Hi
I am not sure If I have understood your question correctly.
If the question is how to set up batcj jobs using lsmw the following steps should help:
1. Create a recording for the set up of batcj jobs(t-code SM36)
2. Specify the fields like batch job name, class, user, program, variant and the frequency. Some values might be constant.
3. Complete the LSMW script. This will create a batch input session. Use t-code SM35 to process the session either in background or foreground. You can check the batch jobs created using t-code SM37.
However if your question is relating to how the batch job is set up to upload files using lmsw, then once the script creation is completed, then a batch input session is created and has to be processed using SM35. It will create the open items/master data using the t-code mentioned in the recording of the lsmw.

Similar Messages

How to set up the communication channel for third party idoc

Hello,
I am trying to send an idoc from an sap 4.6c system to an third party system. The third party system is supporting idcos with trfc.
My problem is to set up the communication channel in the integration builder (configuration) for the third party system. The idoc is waitung in XI to transport.
My settings are:
adapter type: idoc
transport protocol: idoc
message protocol: idoc
adapter engine: integration engine
rfc destination: xyz (is working fine)
interface version: sap release 4.0 or higher
port: ??
sap release 46c
My problem is the port. should i set up a port in idx1? But the third party is not an sap system and so i dont have a client.
On the xi i have defined a port in transaction we21 (transactional rfc) for the third party with my rfc destination xyz. But if i enter that port in communication channel i got error messages.
Thanks for any help.

Hi Christian,
yes, you have to mainztain that port in idx1.
First ypi load the rfc-metadata from an SAP referenzsystem and afterwards copy this metadata to the third party port.
For further details check the onlinedocumentation "IDoc Processing with the IDoc Adapter" XI -> runtime -> adapter
Good luck,
Holger

How to set the specified communication channel invisible in RWB?

Hi,gurus:
We have many communication channels in our XI server.
You know that we can filter the communication channel in communicaiton channel monitoring.
Are there other methods to set the specified communication channel invisible in RWB without using filter or deleting the communication channel?
Thanks in advance.

Hey,
>Are there other methods to set the specified communication channel invisible in RWB without using filter
NO - To my Knowledge,
In RWB - you can stop/inactive the Adapter
Cheers
Agasthuri

How to set up an RSS reader or RSS feed

Can you please help me to set up an RSS feed.

You can use a extension in Safari, take a look at this link, https://extensions.apple.com

How to set audio hardware input channels for narration & to what?

Searched forum - hope I didn't miss solution for the following:
Using PE3 in Windows XPSP3
Tried for the first time to add narration to a project. Was using a stereo/microphone headset. Got nothing but noise. Could record in Windows recorder and Audacity. However, the microphone as part of the set would not work in Windows Audio Hardware Test Wizard. The set was using a sound chip on the motherboard.
A friend of mine has the same OS, motherboard and is using PE3. He too had never tried adding narration - but tried with a USP connected set, and was successful.
I removed my stereo set, and connected a USB set. To make sure all settings were reset, I did a cold reboot. The USB set worked in Windows Audio Test Wizard. I opened my project again, and in Edit/Preferences/Audio Hardware, clicked AIIO Settings. Unchecked the old set (Realtek) in both the Output and Input Ports area, checked the USB Audio Device, moved to the top of both lists.
Then tried to add narration and got the error message "Your current audio hardware selection does not have any input channels. Please use Preferences>Audio Hardware to correct this problem.
Thinking that maybe this was a preset for the project and couldn't be changed, I started a new project, no video, just tried to add narration, and got the same message.
The entries in the columns in the ASIO Direct Sound for Full Duplex Setup menu for the USB Audio Device in the Input section are: 2048, 0, 1, 16, Yes
The only one of these that seems to be able to be adjusted is the second number - the Offset (Samples). The Audio Channels number is set to 1 and doesn't seem to be changeable. Suggestions?

When working with Audio in most NLE's, i.e. Premiere Elements, or Pro, there are basically three areas that can affect how the Audio is handled on one's system. First, there is the Sound settings in Windows (from Control Panel). Next, the Audio card/chip probably/possibly has a console to make settings at the card/chip level. Last, and these are really two locations, but I'm only counting them as one since they are both in the NLE - Edit>Preferences>Audio & Audio Hardware. This is where Steve is referring to. Check all settings, and I'd suggest doing so in the order that I listed them above: OS, Audio card, then Premiere. A Mute, or by-pass in the first two, can override the settings in Premiere, and you may have its setting correct, but still not be able to effectively use your hardware.
The exact settings chosen will depend on the exact hardware that is properly installed. Without knowing all of your hardware and other settings elsewhere, one cannot give you a definitive answer. Ideally, in the settings drop-downs, you *should* see your hardware listed. Look closely, as these can be a bit cryptic.
If you are still unable to get your hardware working properly, a fourth place to look would be Control Panel>System>Hardware>Device Manager for your Audio hardware. Check that Device Manager sees your hardware, and that it is working properly.
If all is set up properly, but still not working, report back with exact specs on your system, including all of your Audio hardware. There are possibly some more steps that can be taken. I will not mention them now, as they *should not* be needed. If you do need further assistance, please list every option in all of the drop-down lists from Premiere, so we can know what your choices are.
Good luck,
Hunt

How to Set Left/right audio channel while Video playback

how can I controlling the left / right audio channel while video playback, I can't find any method or class for this in JMF, anyone that can direct me how to do it?

The way I found to control two stereo channel is to implement a plug-in Effect that will control two volumes (left/right) indipandently.
You can start from the example GainEffect from sun, and implement your control.
For eample, if you want to mute the left channel, simply set to 0 all the odd samples (or even...I don't remember exactly, try it).
You have then to add you plug in to the processor chain... again see the examples.
More complex effects (panning etc) can be done in the same way, but it seems to me that it's quite CPU intensive.
Bye
Marco

How to set up for file transfers via Bluetooth

Hi all,
I have a blackberry bold 9000 which I need to set up to transfer some pics, etc to another phone (not a Blackberry) When I try to connect from the other phone it says
"You can't connect with target device because it lacks of the File Transfer Profile (OBEX FTP) and/or the Object Push Profile (OBEX OPP) Bluetooth services"
Can anyone tell me how to get these??
The other phone is a HTC Magic.
Thanks in advance.

Which device is the "target" device? From what you describe it sounds like the HTC is the target device and that would be an issue with that device, not the BB.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

How to set a I/O channel in NI PXIe-6556 to ground when in PMU mode

Is there a way or API call in LabVIEW to set any one of the channels to ground within the PXIe-6556 when in PMU mode?
Solved!
Go to Solution.

If you disconnect the PMU, you will have the option to go to tristate or your previous digital state, but not ground. Forcing 0V is probably the closest you can get to a GND like behavior. The default line state is tristate for this device, which will leave the line floating if there is no active driver.
Kyle A.
National Instruments
High Speed Digital I/O Product Support Engineer - R&D

How to set sap directories for FTP via TCode:AL11?

Hi, all
I want transfer data from a FTP server to BW. With TCode AL11 I setup SAP directory for FTP, format as following:
Z_MYDIR ftp://user:[email protected]
ftp://10.5.1.21 is the main directory in my FTP server.
but when I double click the row of the above, error occoured as the following:
Wrong order of calls <- CALL opendir(,,..)
I want to ask how to setup the ftp directory in sap al11, and why the error occoured.
Thank you very much.
Jiande Ding
Edited by: Jiande Ding on Dec 3, 2008 9:24 AM
Edited by: Jiande Ding on Dec 3, 2008 9:49 AM

Hi,
As i know there is no possibility if alphanumeric number range in sap.You check with any exit before updating the no in database.check this and post .
Regards,
Madhu.

How to set status in fb showing via ios

**** off

if you pull down on the notification center and use 'tap to post' on the facebook button. if you just try to post in the facebook app itself it won't show 'via ios'. if that is a concern for you, contact facebook.

How to set JVM system properties in Oracle Portal ??

Hello Guys,
I want to set javax.net.ssl.trustStore="path to keystore" ,JVM system properties on oracle portal,
Like i want to configure my keystore with oracle portal so that my application can make a success full connection with back end using https.
i read the following note from one of the Oracle tech note,which says that
It is important that this system property is passed as a command line option to Oracle Application Server Containers for J2EE (OC4J). Setting the property in oc4j.properties will not help because the system property is read first before OC4J reads this file. Therefore, it is best to modify the <java-option> line in the OC4J_portal section of ORACLE_HOME/opmn/conf/opmn.xml.
So, i made the required changes to OC4J_portal section of opmn.xml file as below
added value is shown in bold
<data id="java-options" value="-server -Xrs -Djava.security.policy=C:\oracle\OraPortal\j2ee\OC4J_Portal\config\java2.policy -Djava.awt.headless=true -Xmx256m -Djavax.net.ssl.trustStrore=C:\keystore1 -Djavax.net.ssl.trustStrorePassword=password1"/>
Even after making these changes, my application not able to make connection using https.
Could u guys explain me, what things are going wrong or somethings else i need to do to make it work.
Any thoughts would be highly appreciated.
Thanks
<Neeraj Sidhaye/>
http://ExtremePortal.blog.co.uk

Hello Guys,
I want to set javax.net.ssl.trustStore="path to
keystore" ,JVM system properties on oracle
portal,
-Xmx256m -Djavax.net.ssl.trustStrore=C:\keystore1
-Djavax.net.ssl.trustStrorePassword=password1"/>Hi,
if the above is an exact copy of the values you inserted then it looks like you have two typos in the command line parameters.
-Djavax.net.ssl.trustStrore -> trustStore
-Djavax.net.ssl.trustStrorePassword -> trustStorePassword

I have my first iphone 5 and don't know how to set it up?

Can you advise how to set up my new phone via Apple/icloud? It is all entirely new to me. Thank you

http://www.apple.com/support/iphone/essentials/

Fetching data in R/3 via portal application(JSPDYNPage)

Hello Everyone,
I want to fetch data in R/3 server via portal application(JSPDYNPAGE) & display that data as an output of the portal application in TABLEVIEW format. Can anyone guide me on this (I:e-How to connect to R/3 server via portal component & fetch data & display the same). any similar application developed for a reference will be of great help.
Thanks,
Chetan

Hi Chetan,
I hope you know how to create a JSP Dyn Page, anyway I will explain it briefly.
Open NWDS->File->New->Create a portal application project->Specify the project name
right click on the project->New->Create a new portal application object->Portal component->Select JSP dyn page-(By default it creates class and all)->this is available under description on the right column-
Now goto the Java page->see the functions->attach zip and jar files(HTMLB plugin)
->Right click on the project->goto properties->Java build path->Add external jars->Select com.sap.portal.htmlbbridge.zip and htmlb.jar
This is how JSP page is created.
Now we want to do establish connection with R/3. That I will discuss in the next session.
Award points if this was helpful......
All the best for you
Regards,
Arun Jacob.

How can I set up a Mainstage channel strip to recognize coarse detune?

Can anyone clue me in on how to get Mainstage 2 to recognize coarse detune? Right now I have it set up so that a mainstage channel strip recognizes standard pitch bend messages and I can set the pitch bend range of the associated instrument to 12 (the default for the channel strips appears to be 2), and so standard pitch bend works fine.   But when the pitch bend messages I'm sending are coarse detune, I'm getting zip...nada...nuttin -- even when I have set the pitch bend range for the instrument on the channel strip set to 12.
I don't want to just offset the pitch by a set amount; I want to use coarse detune to bend the pitch by semitones during a performance. If anyone here has any suggestions or knows how to make this happen, I'd really appreciate your help --
thanks in advance,
Lipp

sblipson wrote:
(the default for the channel strips appears to be 2), and so standard pitch bend works fine.
Hi
The default bend range is set within the Instrument plugin setting associated with a channel strip.
sblipson wrote:
But when the pitch bend messages I'm sending are coarse detune, I'm getting zip...nada...nuttin -- even when I have set the pitch bend range for the instrument on the channel strip set to 12.
I don't want to just offset the pitch by a set amount; I want to use coarse detune to bend the pitch by semitones during a performance.
This could depend on the Instrument plugin (which on eare you referring to?).
Try making a knob or fader object in Layout mode and MIDI learn it to incoming PitchBend messages, then map that control to the dtune function.
CCT

How to set a cookie in the browser from an html page called via an Iview

How to set a cookie in the browser from an html page called via an Iview
Hello all,
I have an issue which is causing problems. I have a snap survey (html form with submit and cookie setting) which is embedded in a url iview.
Although the submit and the form work fine, the portal will not allow the cookie to be set it seems.
Is there a way to allow cookies to be set from an embedded page in a url iview??
You will make my day if you know!
System: EP7 SP13
Kind regards
Alex

Hi,
Check this:
http://www.oracle.com/technology/products/ias/portal/html/same_cookie_domain_with_pdkv2.html
Cookie Basics
Web browsers have built in rules for receiving and sending cookies. When a browser makes a request to a web server and the web server returns cookies with the response, the browser will only accept a cookie if the domain associated with the cookie matches that of the original request. Similarly, when a browser makes a subsequent request, it will only send those cookies whose domain matches that of the target web server.
These rules are designed to ensure that information encoded in cookies is only "seen" by the web server(s) that the originator of the cookie intended. These rules also ensure that the cookie cannot be corrupted or imitated by another server. By default, the domain associated with a cookie exactly matches that of the server that created it. However, it is possible to modify the domain at the time the cookie is created. Relaxing the cookie domain increases the scope of the cookie's visibility making it available to a wider "audience" of web servers.
For example, if a cookie is created by a.us.oracle.com, it's domain will usually be set to a.us.oracle.com. This means that the browser will only send the cookie to a.us.oracle.com. It will never send it to any other servers. However, if at the time of creation, the domain of the cookie is set to .us.oracle.com, the browser will send the cookie to any server whose domain falls within .us.oracle.com. such as portal.us.oracle.com, provider.us.oracle.com, app.us.oracle.com etc
Regards,
Praveen Gudapati

How to set up a RSS channel via portal

Similar Messages

Maybe you are looking for