How to set up a samsung 2433LW monitor as a second monitor?

I have a HP Pavilion Elite HPE running on Windows 7 64bit. I have one monitor attached, a HP 2311x connected using one of the two available DVI ports. When I connect a second monitor, a Samsung 2433LW using the second DVI port, the second monitor is not recognised and has a black no input screen and the original HP monitor loses all shortcut icons and only the desktop background is visible.
Please advise how I can get my second monitor to work.
Thanks.

Does the Samsung 2433LW monitor work by itself on the computer???
It sounds like the Samsung is taking over as the primary display and the HP is becoming the secondary display. Try swapping the DVI cables in the back of the computer and see if that helps. Here is a photo of the back of the original display card in your HP Pavilion Elite HPE-540me Desktop Computer;
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Similar Messages

HT3382 I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter. How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter. How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

Hi alangium,
Welcome to the Support Communities!
Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
This article may provide some information about your Mini DisplayPort to AVI adapter. Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/HT3382
18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573#5
How can I detect displays?
If the detect displays option is not available, hold down the Option key while you are in the Display pane.
How do I select additional resolutions on my display?
You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
I hope this information helps ....
- Judy

How to set up multiple monitors on a MacBook Pro

Does anyone know how I might be able to set up more than one monitor to my MBP?
Is there a splitter available, or some other means of connecting additional monitors? Any advice would be appreciated. Thanks!

Hi,
still the best solution although pricey http://www.matrox.com/graphics/en/products/gxm/dh2go/
There are some USB-connected graphics expansions avaiable for Mac, but IMHO these are still not up to the task speedwise.
Regards
Stefan

Cannot get slide show in full screen mode to come up on secondary monitor regardless of how I set up show it always opens on primary screen. Need some help here.

Slide show in PowerPosint for mac 2011 on iMac will not open full screen mode on secondary monitor. Regardless of how I set the slide show preferences it always opens on primary monior with secondardy monitor having totally balck screen. Need some help if anyone else has run into this problem.

You should contact Microsoft for Mac Support and/or post in their forums.

How to Set up an External Monitor on u310

i use the hdmi adaptor to connect to a tv with a pc port
even if i set the display in double mode ( my laptop plus ext monitor ) as soon as i insert the hdmi plug , with no connection to the ext monitor , the screen comes out black
how to set my pc to avoid it ?
thanks
pietro

Dear pgerratico
Welcome to Lenovo forums
could you please try to connect the HDMI while the machine is off and start it and see will it be displaying on the external monitor or not and the computer screen aswell
Thanks
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

How to set Monitoring Discovery Interval for Group Population(GroupPopulator) in SCOM

Hi,
Here with I have created discovery with SystemCenter.GroupPopulator.
<Monitoring>
    <Discoveries>
      <Discovery ID="mydiscovery" Enabled="true" Target="myclass1" ConfirmDelivery="false" Remotable="true" Priority="Normal">
        <Category>Discovery</Category>
        <DiscoveryTypes />
        <DataSource ID="DS" TypeID="SystemCenter!Microsoft.SystemCenter.GroupPopulator">
          <RuleId>$MPElement$</RuleId>
          <GroupInstanceId>$Target/Id$</GroupInstanceId>
          <MembershipRules>
            <MembershipRule>
              <MonitoringClass>$MPElement[Name="SC_a6e117fa996b47c4ae886c188bd8b2ae_Service_b3ad7ca40a1849158c3111d9d508e724"]$</MonitoringClass>
              <RelationshipClass>$MPElement[Name="SCMembership_ecd4ff08a512499d8cbc61f024d165f2"]$</RelationshipClass>
            </MembershipRule>
            <MembershipRule>
              <MonitoringClass>$MPElement[Name="SC_bd2b10979bb54fcf8392edf4eda0b0e1_Service_b3ad7ca40a1849158c3111d9d508e724"]$</MonitoringClass>
              <RelationshipClass>$MPElement[Name="SCMembership_c30716b6e57140ac96fcd406a7bce0cb"]$</RelationshipClass>
            </MembershipRule>
          </MembershipRules>
        </DataSource>
      </Discovery>
</Discoveries>
</Monitoring>
i referred below link,
http://social.technet.microsoft.com/Forums/systemcenter/en-US/291585a6-d7e3-4c58-a703-dc0879ab2bb9/scom-discovery-interval-configuration?forum=operationsmanagergeneral
How to set Interval for this above discovery?
Thanks
-satheesh

Thanks Chunky,
But FilteredRegistryDiscoveryProvider is not helped for me!!
Here i tried to create distributed application via code. First i tried to create via wizard using scom console and saved as one new MP. It working fine and rollup the heath state changes immediately. Then deleted that MP created via Wizard and re-import
that same MP again in to SCOM. It not rollup the state changes immediately. It took time like 4-6 hrs to rollup the state changes.
pls check my link,
http://social.technet.microsoft.com/Forums/systemcenter/en-US/1317dfa1-a124-47b3-97a7-f8bb05ae40c9/not-monitored-state-for-rollup-monitor-in-distributed-application-help-me?forum=operationsmanagergeneral
I tried to find out solution for it. So i tried to run that discovery on Frequency based and rollup the recent heath state.
Why its working while i created distributed application via Wizard, but it took more time for rollup If i re-import that same MP again?.
- satheesh

How to set switch 2900, c3550 or ASA to send traps to monitoring server

how to set switch 2900, c3550 or ASA to send traps to BB monitoring server?
is it just snmp-server enable etc?

You're on the right track.
Please refer to the following Cisco document for a detailed explanation:
Cisco IOS SNMP Traps Supported and How to Configure Them

I want to be able to monitor my teen daughter's computer from home using screen sharing. Anyone know how to set up screen sharing when my daughter's school has her computer set up for Apple Remote Desktop?

I want to be able to monitor my teen daughter's computer from home using screen sharing. Anyone know how to set up screen sharing when my daughter's school has her computer set up for Apple Remote Desktop?

ARD won't be as smooth as you think over the Internet and be a security risk for your daughter.
Your best bet would be to install nannyware, then when she's asleep you can review the logs.
This is the best and Mac friendly
http://www.internetsafety.com/

MacMini connected to Samsung 193P monitor - how do I brighten the display?

MacMini connected to Samsung 193P monitor - how do I brighten the display?

Strange place for it, but try System Preferenes>Universal Access>Seeing>Display, & the Enhance Contrast slider.

How can I use my Samsung 193p as a second monitor?

I am trying to use my Samsung 193P Monitor as my second monitor. It usually has great contrast and good color when attached to my PC. I plugged it into my imac using a DVI to mini DVI adaptor I bought at the apple store. Now it has awful color and the whites are a muddy grey. There do not seem to be any drivers to download. I've called Samsung and Apple and they have no ideas. It is at 1280x1024. Does anyone have any ideas for me? Is there a way to get the monitor communicating with my imac?? Thanks.

Thank you for the suggestions. I tried again. The thing about the Samsung 193P is that it doesn't have any external "buttons" to push for contrast and brightness. You are supposed to use MagicTune to do this, but of course, that is not compatible with mac. Without any adjustments, it usually looks great on a PC. Do you think I could use my Spyder to calibrate it with the mac? Could I only calibrate the 2nd monitor? I don't want to adjust the new mac monitor in any way. Would that be an option?

How do I use my wireless Led TV as a second monitor using my home network without any cables? Both of them are connected to home network

How do I use my wireless Led TV as a second monitor to my mac book pro using my home network without any cables? Both of them are connected to home network

Having a gateway there is not going to be a problem. We just need to configure the Time Capsule correctly to work with the 2Wire.
You will need one ethernet cable to connect the 2Wire to the Time Capsule and a second ethernet cable to temporarily connect your computer to the Time Capsule so that it can be configured.
The 2Wire you have now should already be broadcasting a wireless network, so once you have the Time Capsule setup, you will actually have two wireless networks there.
Here's how to configure the Time Capsule to work with the 2Wire:
Connect an ethernet cable from one of the LAN <-> ports on the 2Wire to the WAN (circle icon) port on the Time Capsule.
Connect another ethernet cable temporarily from your computer to one of the LAN <-> ports on the Time Capsule
Open Hard Drive > Applications > Utilities > AirPort Utility
Click Manual Setup
Click the Base Station tab below the row of icons to assign a name for the Time Capsule, a device password (write this down) and adjust time zone settings
Click the Wireless tab below the row of icons
Wireless Mode....Create a wireless network
Wireless Network Name....Your choice
Radio Mode....Automatic
Channel...Automatic
Wireless Security...WPA/WPA2 Personal
Wireless Password....Your choice (write this down)
Check mark next to....Remember password in keychain
Click the Internet icon
At the bottom, change the setting for Connection Sharing to "Off (Bridge Mode)"
Click Update at the lower right and the Time Capsule will restart after 20-25 seconds and you should get the green light.
You should now be able to connect to your Time Capsule wireless network.
I'm not clear on whether you have tried to setup the Time Capsule to backup your computer. Post back if you need some info on that. We may need to start another thread for that as that will be a different subject.

How to set up and auto-mirror a networked drive?

So here's the situation. I currently have a MBP Retina 15 (max spec'd), and there are some design processes that still run a little slow for my liking. Given that I spend about half my working life at a desk plugged into a monitor anyway, I figured I'd get a Mac Pro to use when I'm in the office.
What I need help with is how to:
-Set up an external networked drive so that I can open and save all my projects to the same place regardless of which machine I'm working on. I spend 90% of my laptop working time at home on the same network.
-Have the networked drive auto-back up to another external storage device so that in case of HD failure. Basically I want to save a file, and have it expeditiously (ideally instantly, but the sooner the better) back up to the secondary HD.
Somebody at the Apple Store suggested using a USB HD plugged into Airport Extreme, and that would work, I suppose, but
1) I'd really prefer something plugged in to the Mac Pro to speed up the data transfer at least one one machine.
2) There's only 1 USB port on the Airport Extreme. So if we were to go this way, the back up mechanism would need to be built in to the drive -- some sort of double external HD that auto-mirrors.
Any suggestions?

Could you use textarea?
sym.$('inputfiled').html('<textarea cols="20" rows="3"></textarea>);
actually the form I used in the file is:
inputMessage = $('<textarea />').attr({'type':'textarea','rows':'10', 'cols': '25','value':'', 'id':'message'});

How to set pixels for smoothest -outline, in a design? I am using PhspCS5 TRIAL Grateful for help!

First, I am not an advanced digital artist rather know (just)basic tools and am quite good with those over the years however, have a new Mac and better
visibility for sure and have a TRIAL version of PSHP CS5 Extended; what I am asking is: how to set the pixels...to acheive the smoothest outline eg. I
designs for greeting cards and now working on a Xmas tree, with gold stars, they look best outlined (vy-light=blk) but when I ZOOM IN I see the 'wavy lines
of the pixels, that are set on 'square'. I wish to know how to set the pixels* #1 and then as far as colours, when I pick a yellow (there are many!yellows !!)
and use my Intuos pen, 'tap tap tap' on the designs (yellow of the star) it does NOT register ....(it did on my other computer and older CS4). So going
back, to my colour swatches, to ...remember just which yellow I picked...ha ha....can be: "not so fast!"
I will be buying this on Subscription at the end of the trial and my bet is that the colour picker/will work on the purchased version when I 'tap tap' to pick up the
same colour II had chosen. Wouldn't it be good to have a monitor of sorts that tells you, what colour(s)one has been using, when you NEED to know, to go
on with the 'design' say after a break for tea etc. ????? ( :
I save my designs when done JPEGs, and see now there is a JPEG 2000...I have no idea what that is all about. I save (1)pdf and one jpeg. Hope this sounds
like what one 'does' ...when one knows far more than I do.
And lastly, what program or tool, can one use to put a 'frame' (border) around a eg: 5 x 7 design (again, my goal is for my designs for Greeting Cards. Is there
another Adobe products I should have for that. Free hand hasn't worked out so well, so far.
I am in advance, so grateful to you - whomever you may be, for your help. I am on my last 'hoorah' path now hoping for success soon....I am a senior of 71 yrs
and so feel I need to really 'get going' and learn these basics to assure my chances of success, at least. Merci, Danke & Thank You ! CDW

Please post in the Photoshop forum.
http://forums.adobe.com/community/photoshop
Bob

How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?

Dear SharePoint Developers,
Please help.
I need to know How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?
I think this is a "sealed column", whatever that is, which is shown in SPD 2013 as a column of content type "document, folder, MyCustomContentType".
I know when I set the column order in my custom Content Type settings page, it is correct.
But, when I load the NewDocSet.aspx page, the column order that I set in the settings page is NOT used for this "sealed column" which is bad.
Can you help?
Please advise.
Thanks.
Mark Kamoski
-- Mark Kamoski

Hi,
According to your post, my understanding is that you want to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx.
Per my knowledge, if you have Content Type management enabled for the list or library (if you see a list of content type with the option to add more), the display order of columns is set for each content type.
Drill down into one of them and you'll see the option under the list of columns for that content type.
To apply the column order in the NewDocSet.aspx page, you need to:
Select Site Settings, under Site Collection Administration, click Content type publishing. In the Refresh All Published
Content Types section, choose Refresh all published content types on next
update.
Run two timer jobs(Content Type Hub, Content Type Subscriber) in central admin(Central Administration--> Monitoring--> Review timer jobs).
More information:
http://sharepoint.stackexchange.com/questions/95028/content-types-not-refreshing-on-sp-online
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to set a Object value by JDI

How to set a Object value using JDI?
For example:
class User{
private String name;
private String id;
set and get method;
public static void main(String[] args) throws Exception {
        VirtualMachineManager vmm = Bootstrap.virtualMachineManager();
        List<AttachingConnector> connectors = vmm.attachingConnectors();
        SocketAttachingConnector sac = null;
        for (AttachingConnector ac : connectors) {
            if (ac instanceof SocketAttachingConnector) {
                sac = (SocketAttachingConnector) ac;
                break;
        if (sac == null) {
            System.out.println("JDI error");
            return;
        Map<String, Connector.Argument> arguments = sac.defaultArguments();
        Connector.Argument hostArg = arguments.get("hostname");
        Connector.Argument portArg = arguments.get("port");
        hostArg.setValue(HOST);
        portArg.setValue(String.valueOf(PORT));
        vmMachine = sac.attach(arguments);
        List<ReferenceType> classesByName = vmMachine.classesByName(CLSNAME);
        if (classesByName == null || classesByName.size() == 0) {
            System.out.println("No class found");
            return;
        ReferenceType rt = classesByName.get(0);
        List<Method> methodsByName = rt.methodsByName(METHODNAME);
        if (methodsByName == null || methodsByName.size() == 0) {
            System.out.println("No method found");
            return;
        Method method = methodsByName.get(0);
I will connect to server and monitor the remote server JVM , There is a object of User, I want to change its value by the Java Debugger Interface by client.
so how to set its value by the client, and I can not got the User bean at client.
I know the basic type filed value changed as follows:
Value newValue = vmMachine.mirrorOf("change var value");// this field is a string.
stackFrame.thisObject().setValue(field, newValue);
But a Object , how can I change its value.
Thanks Advanced.

ObjectReference.setValue() is the method for chaining the value of an Object's field. First you need to find the specific Object you want to change, though.
/Staffan

How to set up a samsung 2433LW monitor as a second monitor?

Similar Messages

Maybe you are looking for