How to set up AD user permisions for a CIFS share on a 7210

Hi
We have a 7210 and so far got it configured and working fine using NFS.
We also wish to use CIFS for general storage on our windows network.
I have added the 7210 without any problems and I can create the share and assign permissions for the root folder using an ephemeral UID and GID , however I cannot see how I would go about setting permissions on subdirectories for individual AD users.
Looking at the wiki it recomends using idmapping, but I don't really want to start creating 250 odd unix accounts ( yes permissions will need to get down to individual user level :-( ) or setting up an ldap and then mapping those to my AD users.
Other mentions in the wiki say to use the OOB client to assign permissions , however , when I connect to the share using a windows client and try to alter permissions , I am only allowed to add permissions of any unix user on the 7210 box.
I hope I'm missing something trivial ......
Thanks
David

Hi
Depending on your needs, you may find that Set level offers the best approach:
Within a Set you have the Playbacks (Set Level, so they work for the entire set) with individual patches in the set "live" for the EWI etc as needed.
You need only map one set of controls for all the Playbacks since only 1 set can run at a time.
CCT

Similar Messages

How to set up multi-user access for an email account?

Hi,
In our business, we run 3 macs with Mountain Lion and use Mail to access our IMAP account. Each of us needs to be able to respond to and see incoming/outgoing messages on our respective computers. Unfortunately our mail provider doesn't like concurrent connections. What kind of application can we use to synchronize this account so everyone sees the same thing on each computer? Any suggestions appreciated.
I should note that we actually have 10 e-mail accounts which all need to function this way, but in the interest of simplicity let's consider we have just the one. Because we have 10 accounts, we can't use iCloud sync, nor do I want to because I don't trust it. I'm looking for something bulletproof and ideally locally stored.

I use Dreamhost and have been happy with them. There are probably a few hundred companies with similar services, although Dreamhost is one of the largest. It is pretty standard practice these days to have either Google or Microsoft transparently hold e-mail services. Exchange has definitely won the e-mail protocol wars. Basically just pick one that uses Google or Microsoft.

I have set up two users, one for myself and one for children. The computer automatically logs in for the children with no password required. When the children go to spotlight and type in a search criteria all of my files show up. How do I prevent this?

I have set up two users, one for myself and one for children. The computer automatically logs in for the children with no password required. When the children go to spotlight and type in a search criteria all of my files show and open up. How do I prevent this?

Log in to your account, and move all your files to your home folder. No other users should be able to access them there and they won't show up with a Spotlight search.
Make sure your kids' account(s) do not have admin privileges.

How can i set up multiple user accounts for my new ipad mini?

How can i set up multiple user accounts for my new ipad mini?

The iPad mini is basically a one user device. There are no Accounts. You can set up restrictions so that only you can do certain things.

I want to set up a user account for my 3 year old, so when she goes into her account, only her games show up on the desktop

I am trying to set up a user account for my 3 year old so that when she goes into her account, only her games show up on her desktop. How??

yes -- I think I am setting it up right, but when I go into her account to check it, it doesn't work.

How to Set A Default Start Time For New Events In Calendar?

How to Set A Default Start Time For New Events In Calendar?

John,
Thanks for that suggestion - could not get it to work. However, I did manage a different approach. I finally determined the sequence of events in terms of how the various events and listeners fire (I think).
Basically, the CalendarActivityListener fires, followed by the listener associated with the Calendar object's Create facet, followed finally by the CalendarEventListener - the final is where the TriggerEvent is available and then finally, control is passed to the popup/dialog in the Create facet. So, my approach of trying to set/get the TriggerDate in the user's HTTP session was doomed to failure because it was being get before it had been set :(
Anyway, I ended up adding a bit of code to the CalendarEvent listener - it grabs the current BindingContext, navigates through the DCBindingContainer to derive an Iterator for the ViewObject which drives the calendar and then grabs the currently active row. I then do a few tests to make sure we're working with a "new" row because I don't want to alter start & end dates associated with an existing calendar entry and then I define the Start and End dates to be the Trigger Date.
Works just fine. Snippet from the listener follows
BindingContext bindingContext = BindingContext.getCurrent();+
*if ( bindingContext != null ) {*+
DCBindingContainer dcBindings = (DCBindingContainer) bindingContext.getCurrentBindingsEntry();+
DCIteratorBinding iterator = dcBindings.findIteratorBinding("EventsView1Iterator");+
Row currentRow = iterator.getCurrentRow();+
if ( currentRow.getAttribute("StartDate") == null)+
currentRow.setAttribute("StartDate", calendarEvent.getTriggerDate());+
if (currentRow.getAttribute("EndDate")==null)+
currentRow.setAttribute("EndDate", calendarEvent.getTriggerDate());+
*}*

How can I get a "user guide" for Elements 8?

How can I get a "user guide" for Elements 8?

See here (scroll down.):
http://muvipix.com/products.php?subcat_id=44http://muvipix.com/products.php?subcat_id=44http://muvipix.com/products.php?subcat_id=44
and here (Scroll to the bottom of page 2):
http://www.amazon.com/s/ref=sr_pg_2?rh=n%3A283155%2Cn%3A%211000%2Cn%3A5%2Cp_27%3ASteve+Gri setti&page=2&ie=UTF8&qid=1370352322

HT201684 In Yosemite this no longer works, has anyone figured this out? How to set a custom default umask for all applications?

In Yosemite this no longer works, has anyone figured this out? How to set a custom default umask for all applications?
I've tried everything to get a custom umask set for all apps. It just seems impossible...
Is there a replacement for launchd-user.conf?

Please file a bug report: https://bugreport.apple.com
I am sure this is something that got lost, like environment variables, in the Yosemite/iOS merger.

How to set upper and lower limit for service notification in SPRO

Hello everyone,
Good morning....!!
I am new to SAP PM and to SCN as well.
I have a question on Service notification user status.
I have notification profile configured in SAP as below:
Status no      Status          Short text              Lower limit          Upper limit
5                  REGD          Registered                1                          70
10                PCKS            Pack sent                  1                          70
20                APRC            Application received 1                        70
etc..
I want the statusesto be set as navigation should only allow to go back one by one...like from APRC -->PCKS not to REGD.From PCKS -->REGD etc..not vice versa.
Can enayone explain me to how to set lower and upper limits for these according ot the above requirement.
for more details please check my attachment.
Thanks in advance..!!
Regards,
Sudha.

Once you change the status to previous status, just save the order. Then again open the order & try to change the user status.
Just I made replica of your profile. I could able to change (even without saving the order).

How do u handle the user parameters for a currency field.

How do u handle the user parameters for a currency field.
   Decimal saperator and a hundreds saperator. (depending upon the user parametes set for the user the saperators may differ)
      Eg: currency field: 13.896,01 (In this case u2018,u2019 is a thousand saperator and u2018.u2019 is a decimal saperator) How to handle this one.
Regards,
Ram.

Hi,
Try this code....
DATA: V_KURSF1 TYPE c LENGTH 10,
        v_kursf2 type c LENGTH 10,
        v_dcpfm    TYPE xudcpfm, "Decimal or Thousand Notation
        v_thousand TYPE char1,   "Thousands Notation
        v_decimal TYPE char1.   "Decimal Notation
CONSTANTS:    c_x      TYPE char1 VALUE 'X',
                c_y      TYPE char1 VALUE 'Y',      "Value Y
                c_comma TYPE char1 VALUE ',',      "Comma
                c_point TYPE char1 VALUE '.',      "point
                c_blank TYPE char1 VALUE ' '.      "Blank
IF v_dcpfm IS INITIAL.
    SELECT SINGLE dcpfm
    FROM usr01
    INTO v_dcpfm
    WHERE bname = sy-uname .
    IF sy-subrc = 0.
      CASE v_dcpfm.
        WHEN c_x.
          v_decimal = c_point.
          v_thousand = c_comma.
        WHEN c_blank.
          v_decimal = c_comma.
          v_thousand = c_point.
        WHEN c_y.
          v_decimal = c_comma.
          v_thousand = c_blank.
      ENDCASE.
    ENDIF.
   ENDIF.
           Find c_point in wa_segment-exchange_rate. ( Eg:ield)
          if sy-subrc = 0.
            replace c_point in wa_segment-exchange_rate with v_decimal.
          endif.

How can we restrict the users/planners for a planning book?

Hi experts,
How can we restrict the users/planners for a planning book?
Thanks,
Naga.

Hi Naga,
we describe this in our SAP Demand and Supply Network Planning rapid-deployment solution.
Access this area directly via
http://service.sap.com
/rds-dpa
In the configuration guide Demand Planning Settings, Macros and Chart
Engine (DP3) read Appendix: Setting up Roles and
Authorizations.
BR Frank

How to setting the root user profile?

It seems that I can't fine any complet manual to introduce how to setting the root user profile file which locate at /etc/profile? Who can help me find out or figure it out

first /etc/profile is a global profile for the system
its not only specific to root
from here you can configure the system wide paths
Regardless of the shell you are using, when you first log in your system generally runs the system profile file, /etc/profile. This file is generally owned by the system administrator and is readable (but not writable) by all users.
After your system executes the system profile, it runs the user profile. The user profile is one (or more) initialization files that define your working environment. For example, if you're in the CDE environment your system checks this file (or set of files) each time you start a new terminal or window.
refer this::
http://www.shrubbery.net/solaris9ab/SUNWabe/ADVOSUG/p33.html
man page here
http://www.unix.com/man-page/OpenSolaris/4/profile/

How can i obtain a user guide for the ipod nano 16GB 5th gen. with out printing it off the computor

How can i obtain a user guide for the ipod nano 16GB 5th gen. without printing it off the computor.

You can't, at least not the one provided by Apple.
B-rock

How to find the exact user exit for our requirement?

Dear Mr. keerthi,
can you please explain me how to find the exact user exit for our requirement?

Hi sandip
There is more than one method in which you can check for user-exits.The following method is used very often.
How to find the exact user-exit for your requirement.
1. You can check the user exists using transaction SE85.
2. Repository Information System -> Enhancements -> Customer exits
3. You can search the user-exits by package name.
4. Double click on each exit name to check the function module exits.
The procedure to find the package name.
Execute transaction SE93
Enter the tcode of the transaction for which you want to check the user exit.
Example: if you want to find the user-exit for purchase orders while changing, enter ME22n and press display.
You will get to see the package name
But you need to confirm that the user exit will get triggered at the appropriate event.
( example: you might want some validations to be done ON SAVE of a purchase order)
Checking if the user-exit is getting triggered or not.
1. Open the user exit function module (that you have got in step 4) in Tcode SE37.
2. Click on where used button. In the pop up that immediately appears choose only programs .
3. You will get a list of programs. Double click on the program name.
4. You will get the list of location where this function module user exit is used.
5. Place session break points at each of these location ( at each CALL FUNCTION statement)
6. Now go to your transaction ( say change purchase order tcode:Me22n) and check if the user exit is getting triggered on appropriate event.
regards,
Prasad

How to find the appropriate user exit for invoic02 idoc in idoc_output_invo

Hi all,
I am new to this community p
i have issue regarding the How to find the appropriate user exit for invoic02 idoc in idoc_output_invoic function module.........
thanks,

Hi ,
welcome to SDN.
You can select the appropriate Customer exit accrding to the available parameters .
The list of exits available are
EXIT_SAPLVEDF_001
EXIT_SAPLVEDF_002
EXIT_SAPLVEDF_003
EXIT_SAPLVEDF_004
For Example , if you want to modify the Idoc data(EDIDD) you have to use the EXIT_SAPLVEDF_002. accodingly you can select the user exit according to the avaialable parametres.Use Table MODSAP fto get the Enhancement name.
Hope this Helps
Rgds
Sree
Edited by: Sree on Jul 23, 2010 12:11 PM

How to set up AD user permisions for a CIFS share on a 7210

Similar Messages

Maybe you are looking for