How to set up Airport Extreme in a Hotel?

Hi guys,
i'm living in a hotel for about a month or so and i don't like the hotel's wireless internet (it's at a Hilton Garden Inn) so i decided to buy this Airport Extreme so i could have a better connection. I like to play xbox 360 also and the lag on the games kills me. Any type of help would help me, as i am not tech savvy. What i'm really getting at is that i want to use my Airport extreme as the place where i get my internet from and where i can play xbox on if that makes any sense?

Tesserax has you on the right path.
IF...the hotel is trying to charge you for each device that connects, you could try changing the Connection Sharing setting to "Share a public IP address". You'll need to click "ignore" to the warning that you will likely receive about a Double NAT on the network.
If you are playing games online, the console will probably not like the Double NAT setting at all. But, it's worth a try if the Bridge Mode setting wants to charge for each separate device that connects.

Similar Messages

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

How to set up Airport Extreme for 11ac and 11n?

I have just purchased the new Airport Extreme (August 2014) because Apple's website states
Simultaneous dual-band support.
AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
I have number of Macs in my home from a new MacBook Pro with Mavericks to a Macbook Air with Snow Leopard (due to required software) and iPads.
So after setting up the new Extreme my new MacBook only accesses 11n as does my older Macs. I checked by holding down the option key while clicking the WiFi icon at the top of my Mac. Well, not so automatic then as I was expecting 11ac and 3 times faster access (as stated by Apple).
I then looked for some documentation for setting up but cannot find anything.
Hence my question here.
How to set up Airport Extreme for 11ac and 11n simultaneously?
At present the new Extreme is no better than my previous 2 year old one.
Thank you.
Michael

How to set up Airport Extreme for 11ac and 11n simultaneously?
Assuming that it is operating correctly, 802.11ac and 802.11b/g/n are broadcast simultaneously by default.
Simultaneous dual-band support.
AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
That is advertising. The real information is usually found in the small and hard to read footnotes:
Based on theoretical peak speeds. Actual speeds will be lower.
AirPort Extreme is based on an IEEE 802.11ac draft specification. Performance based on comparison with Apple’s 802.11n products. Comparison assumes AirPort Extreme network with 802.11ac-enabled computer. Speed and range will be less if an 802.11a/b/g product joins the network. Accessing the wireless network requires a Wi‑Fi-enabled device. Actual speed will vary based on range, connection rate, site conditions, size of network, and other factors. Range will vary with site conditions.
Since the 802.11ac signal is being broadcast only using the 5 GHz band, some users report that they have had better results by using the option to assign a different name to the 5 GHz band, and then pointing their Mac to that specific signal or network. You may want to try that option.
But first as a test, please locate the MacBook Pro about 10-15 feet or 3-4 meters from the AirPort Extreme with clear line-of-sight between the two devices. Restart both the AirPort Extreme and the Macbook Pro and then check to see if the Mac is connected to an 802.11ac signal.
If not, please power off your other wireless devices...computers, mobile devices, etc. temporarily, and try the same test again.
Please report on your results.

How to set up airport extreme with TPG ADSL2 ?

How to set up airport extreme with TPG ADSL2 ?

I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

How to Set Up AirPort Extreme 802.11n only Network

I purchased a used AirPort Extreme base station and a used AirPort Express off eBay to upgrade my home network. Both are the latest model AE (dual band II, firmware 7.5.1) and AX (802.11n, firmware 7.4.2). I want to use my AE as main router (Internet connection, DHCP) and use my AX to wirelessly extend network to my family room, where I have my Xbox accepting only wired network. And I want AE and AX to communicate through 802.11n to maximize bandwidth. Sounds easy right?
Well, I've got this set up mostly working except the 802.11n part. Not matter what I do, It seems only operating in g mode. I made my AE creating a 5Ghz network but I couldn't find this network anywhere. Not on my iPad, not on my iMac.
I'm wondering if I have a defective AE. The seller on eBay told me he used the 11n network just fine. The router is still under warranty, I'm wondering if I should ask Apple for a repair? But since I'm pretty new to Mac in general, I figure there might be something I just missed and hence this post. Any help is greatly appreciated!
Some screenshots of my configuration: http://picasaweb.google.com/xianxu/IPad

I do have an AX that extends the AE network. There is nowhere on AX that I can specify radio mode, once I specified it to extend a network. I assume AX talks to AE over the n network and then extends the network to be g compatible? Sounds really strange.
Maybe not too strange. Since the AX is a single-band device, it can only extend the AEBSn's 2.4 or 5 GH radio, at a time, not both simultaneously. Since your iPhone was able to connect, most likely, it was extending the 2.4 GHz radio ... which was also configured to support "g" devices. What I haven't figured out is how, if you set the AEBSn's Radio Mode to "n only" why non-"n" are still able to connect when the network is extended.
... I chose to create a different network name for 5Ghz radio as something like: MID-EARTH (5 GHz). However I can't seem to find this network anywhere. I'm wondering why this is the case? Is my AE somewhat defective?
This may be a completely different issue than the extended network one. If you remove the AX from the network equation, wireless clients should see two different Network Names or SSIDs ... one being "MID-EARTH (5 GHz)" and whatever you called the 2.4 GHz network. That is, assuming that the client is capable of accessing both bands. If this is not the case, we would need to revisit your AEBSn's configuration settings.

How to set up Airport Extreme wireless router

Hello. I am trying to connect my Airport Extreme base station to my phone line connection.
From the phone line there is an ADSL filter which has a RJ11 output and phone modem. I purchased a RJ11 to RJ45 (Ethernet) and tried to plug into my router. The airport extreme doesn't recognise anything being plugged in!
My ISP is TalkTalk. This is a secondary router. Other one is a Netgear using downstairs phone modem.
Any help would be grately appreciated
Sam

Thanks for your answer.
So if i buy a DSL modem and go Phone line > DSL modem > Airport Extreme > Mac / WiFi - will that work?
Do you recommend any specific DSL modems that dont use USB (or USB...)?
Thanks

How to set an Airport Extreme to DHCP only mode

Folks,
Right off let me advise that I have not even reached amateur status when it comes to this comms stuff, so please bear with me.
I have an ISP supplied cable (no modem) that is connected to the WAN port of my AE. The AE is currently configured to run in DHCP and NAT mode. The ISP is apparently also supplying NAT since I am getting a double NAT warning from AE through Airport Utility. Performance does not seem to be affected although I am seeing some tremendous slowdowns on a couple of websites. From reading quite a bit of info here and elsewhere, I think I would like to run in DHCP only mode and let the ISP do the NAT control.
This is when I run into a problem. When I configure AE to run DHCP only, it asks for a range of addresses. I have no clue what to put in here. When I enter 192.168. ..., I get a message about invalid or overlapping address ranges.
What do I need to do?
Thanks,
Jim

As I said, it is very rare that an ISP would use this type of setup these days.
You would already know if you had a bank of fixed IP addresses that were supplied to you by your Internet Service Provider, since they would have provided you with a document that listed all of the IP addresses to use.
An example of this might look something like.......
12.345.678.910
12.345.678.911
12.345.678.912
12.345.678.913
12.345.678.914
If you do not have a document from your ISP with a list of specific IP addresses to use......then you cannot use the DHCP Only setting.

How do I use Airport Extreme to limit internet time for my kids? His computer is hardwired to the modem.

How do I use Airport Extreme to limit internet time for my kids? His computer is hardwired to the modem.

You can set up daily time limits for each computer that connects using wireless, but it is not possible to do this when a computer is connecting directly using a wired Ethernet connection.
Open Macintosh HD > Applications > Utilities > AirPort Utility on your Mac and click Manual Setup
Click the Access Control tab below the icons
Select Timed Access
For more details on this, click the Help menu at the top of the screen and enter the following phrase into the search box:
Controlling access to your wireless network
A more sophisticated approach would be to use a service provided by OpenDNS. From your computer, this would allow you to monitor web sites visited, and block any unsuitable sites. More info is here:
http://www.opendns.com/landings/familyshield

How do I reset Airport Extreme Model A1034?

How do I reset Airport Extreme Model A1034?
I am using a MacBook Pro to set up the airport, but, I get this message:
"This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information."

You would download and install AirPort Utility on the PC.
For Windows 7 and above.....use AirPort Utility 5.6.1 for Windows - Support - Apple
For XP SP3 and Vista SP2......use AirPort Utility 5.5.3 for Windows - Support - Apple
For XP SP2 and Vista SP1......use AirPort Utility 5.4.2 for Windows - Support - Apple

How do I connect Airport Extreme in place of Buffalo wireless router in Japan?

How do I connect Airport Extreme to replace current Buffalo wireless router? ISP is StarCat in Japan.

Hello DM1960,
Thanks for using Apple Support Communities.
To set up and configure your AirPort Extreme please follow the steps in the article below:
OS X Mavericks: Set up an Apple wireless device
http://support.apple.com/kb/PH14058
Take care,
Alex H.

How fast IS the AirPort Extreme?

I'm in need of a new router/modem to go along with my new ISP and new computer. (the computer is a windows) but i have 3 iMacs and 2 Windows.
I just have a couple of questions.
1. How fast Is the AirPort Extreme? Does it boost the speeds of the speeds you already get from the ISP?
2. Is it a router and modem all in one?
3. How compatible is it with windows? (can I set it up on a windows computer?)
4. Is it REALLY worth the cost?
5. What other router/modem combo can compare to it?

1. How fast Is the AirPort Extreme?
The Ethernet ports are 10/100 (100 Mbps max). The wireless interface is 802.11g (54 Mbps max).
Does it boost the speeds of the speeds you already get from the ISP?
No, the Internet access speed is limited by the connection speed to your ISP.
2. Is it a router and modem all in one?
It IS a router. It has a built-in 56k modem but it does not have a DSL or cable modem built-in.
3. How compatible is it with windows? (can I set it up on a windows computer?)
Ethernet and 802.11g are both standards. There is a Windows version of the AirPort Admin Utility which can be used from Windows to configure the AirPort Extreme base station (AEBS).
5. What other router/modem combo can compare to it?
Verify few other wireless routers have built-in USB printer support. Of those few devices even fewer are compatible with the Mac.

How do you use Airport extreme at hotels etc, when traveling? I can plug my computer into the Airport with my ethernet but how does Airport pickup signal?

How do you use Airport extreme at hotels etc, when traveling? I can plug my computer into the Airport with my ethernet but how does Airport pickup signal? What equipment & devices do I need to travel with to make this possible?

You may mean the AirPort Express.....not AirPort Extreme.....as the Express is a popular travel router.
The whole idea behind using this device is that the hotel must provide an Ethernet jack in the hotel room. Then you connect the AirPort Express to the Ethernet jack with an Ethernet cable and configure it to provide your own wireless network in the room. You still have to agree to terms, pay the fees, etc.
The problem with this approach is that it is getting very difficult to find hotels in North America that prrovide an Ethernet jack....most have moved to wireless networks and the others are not far behind.
So, if the hotel is already providing a wireless signal, the AirPort Express is of no use in that situation.
If you normally stay at the same hotels, and know that they provide Ethernet ports, an AirPort Express might make sense in terms of convenience.

How do I connect airport extreme to seagate hard drive using windows

How do I connect airport extreme to seagate hard drive using windows?

First the AirPort Extreme Base Station (AEBS) cannot share out an external HDD attached to its USB port unless it is formatted in either HFS+ or FAT16/32. It will not work if the HDD is formatted in either NTFS or ExFAT.
If the HDD is formatted properly, when you access the AEBS with the AirPort Utility, does the HDD show up properly on the Disks tab of the utility?
If it does, then you would access the HDD as any other network share, using the following format: //servername/sharename. In the case of the AirPort Disk (a HDD attached to the USB port of either an Extreme or Time Capsule), the "servername" would be the Extreme's Base Station Name, and the "sharename" would be the volumename of the HDD.

How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

If you have not already done so, your chances will really improve if you....
1) Connect the printer to the USB port on the AirPort Extreme
2) Download and install Bonjour Print Services for Windows on the PC

How to set up Airport Express in Bridge mode for hotel use

Please provide step by step instructions on how to set up Airport Express in Bridge mode for hotel use. I do not have a computer with me, only an iPhone and AEX 802.11n.

+"Please provide step by step instructions on how to set up Airport Express in Bridge mode for hotel use. I do not have a computer with me, only an iPhone and AEX 802.11n."+
AirPort Utility is the application that must be used to setup and make any configuration changes to the AirPort Express. I'm not aware of an "App" for this.
If you could borrow a computer from someone there for 30 minutes or maybe use the computer in the lobby, you could download AirPort Utility and reconfigure your Express. To help with setup, use an ethernet cable from the computer to the Express to help AirPort Utility "see" the Express.
http://support.apple.com/downloads/#airport

How to set up Airport Extreme in a Hotel?

Similar Messages

Maybe you are looking for