How to set up an E-mail server, ( To recieve and send outside a company network)

Hie,
The scenario is, our company wants to start hosting their own emails and not through an ISP. I somehow managed to install and configure MS Exchange server 2010, we are able to send and receive mails but only when we are connected to our company network.
Is there something i have missed?
Regards
Felix

Hi,
this should help you:
Enable Outlook Anywhere:
http://technet.microsoft.com/en-us/library/bb123542(v=exchg.141).aspx
Enable Exchange ActiveSync:
http://technet.microsoft.com/en-us/library/bb124234(v=exchg.141).aspx
Understanding Outlook Web App:
http://technet.microsoft.com/en-us/library/aa998629(v=exchg.141).aspx
Hope that helps
Regards
Sebastian

Similar Messages

  • How to set up the "incoming Mail server" for google apss account

    how to set up the "incoming Mail server" for google apss account

    The settings are not generic for all webmail accounts, only your office IT department would know what the server address is for their outgoing email server.  You'll have to ask them about it.

  • HT1277 how do I find my outgoing mail server info for gmail account set up?

    how do I find my outgoing mail server info for gmail account setup?

    Most current Mac systems have a preloaded set of information and settings for the common email providers.  Try just choosing gmail and enter your userid and password at the prompts and see if the preload configures correctly for you.

  • How to set up SAPconnect with email server

    Hi,
    Does any one know <b>how to set up SAPconnect with email server</b>
    We are using workflow and when it fails it we are sending the notification mail to the user on his company mail id, i.e. [email protected]
    This is working in the current production system. We are doing the new development which will replace the current production system. The existing Basis team does not know how it was setup in production system and how to set it up in the new system.
    When we send any mail notification from workflow we can see the mail in SCOT transaction but it is not received at the specified mail address.
    Can any one provide the configuration steps or any document for this.
    Thanks in advance..
    Pratik

    Hi Pratik,
    Check the following link:-
    /people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
    http://help.sap.com/saphelp_nw04/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
    these link will help u to config SMTP.
    And one more thing u have to do..
    Go to SE11 n open Table sxnodes in change mode.
    And change F_ESMTP field to false i.e. BLANK for the Field NODE = SMTP.
    Hope this will work For U.
    Regards
    Sachin Dhingra

  • How do set operation timeout in tomcat server?

    hi all
    suppose i have one endless loop program(jsp) that program run under tomcat server,
    so it's keep on runing in tomcat server.
    i want, after some time the server send error message like operation timeout.
    how do set operation timeout in tomcat server?
    if anybody know help me.
    my mail id [email protected]

    Well, the server.xml file has connection time outs, but that is for idle time, I think... I'm not sure what would happen in a loop... , especially if you are sending some data back to the client in each iteration. Generally you shouldn't be starting a loop that will really run forever. Maybe have some type of counter to break out if something hasn't occurred within x iterations, or create a separate thread that can sleep for x seconds and set a flag to break the loop after that time.

  • Help with setting up a basic mail server for Notes sync

    Hello,
    I have managed to setup a CalDAV and CardDAV server for local syncing of my iOS devices with Mavericks via Mavericks Server.
    I wish to also sync notes.
    I understand a mail server is required and I have been trying to set one up solely for notes sync.
    After turning on the mail server I can sync notes to the server on my Mac but I cant figure out how to do it on the iOS devices.
    Is it possible to setup a local mail server?
    Can someone provide me with a basic guide?
    Thanks

    Thanks for reply Simon.
    I havent been able to find a guide so I have been guessing trying to setup the email server. Basically ive tried to setup a user email [email protected] (syncuser is also the account I use to sync my calendar and contacts)
    I have turned on the mail server, made a new account on my Mac in mail:
    Description: OS X Server
    Email Address: [email protected]
    Full Name: syncuser
    Incoming Mail Server: myserver.local
    User Name: syncuser
    In the user account  I have added the email address.
    Im guesing I have to make the mail account somewhere in the server settings but I cant find anything. If turn off SSL in the mail settings I at least get a response from the server:
    Unable to Connect
    There may be a problem with the mail server or network. Verify the settings for account “OS X Server” or try again.
    The server returned the error: The connection to the server “myserver.local” on port 143 failed (error 49: Can't assign requested address)

  • Cannot set up an Incoming Mail Server

    I am trying to set up Aliases but when I get to the Incoming Mail Server field in Mail Preferences it is greyed out with "mail.example.com" and if I alter any other field and then try to save that account I get a message "Incoming Mail Server field cannot be empty".  How can I get the Incoming Mail Server field to highlight so I can insert something and what do I put in?

    Yes that is what I was doing.  I am confused because initially I thought I had completed the process in Safari iCloiud but the the Aliase email address didn't show uo when I composed message and wanted to send it from that address and not the default.  I added the Aliase in Mail>Preferences>Accounts>Add new account and sent an email but looking at the inbox in Mail there is a "lightening" symbol and clicking on that and entering the password comes up with the message "Mail cannot conect to the account (aliase address)".  When I wnt back to Preferences that is when I realised that the form wasn't completed.  Since I started this thread I have received a reply to my earlier email using the Aliase address and sent a reply to that but the lightening symol still remains.  Any ideas?

  • If the MS Exchange ActiveSync port had been changed, how to set up the iPad Mail account?

    Hi all,
    The default MS Exchange ActiveSync port is 443 but due to security reason it had been changed.
    Under this situation how to set up the iPad Mail account?
    I could not find out the port modification area in iPad account settings.
    Or any other apps are suitable for multiple accounts within 1 domain?
    That means i can use this app for more than 1 email accounts within 1 exchange server.
    I had tried eMailGanizer. It could allow you to modify the port number but if you need to send email you still need to set up the account in Apple mail first.
    I tried Outlook Mail but could not allow multiple accounts within 1 domain.
    I tried Mail Access 2010 but it could not display the emails in the server.
    Please help!
    Thanks a lot!

    Next test
      using Outlook.com I just deleted an email
        by clicking the Trash icon that appears
          when hovering near an email subject
            in the list of emails.
    Then I clicked the Send/Receive button
      in Apple Mail.
    The email disappeared from the Inbox listing
      in Apple Mail.
    The email is listed in the Deleted Folder
      within Apple Mail.
    The email also appears in Outlook.com
      within the Deleted Folder
    I'm not seeing an equivalent operation in Outlook.com
      to perform the Erase Deleted items
        such as Apple Mail provides..
    There was momentarily a "Sweep to Delete"
      animation that appeared and is now gone..
    Pomme is correct.. by selecting "Erase Deleted Items"
      within Apple Mail does not clear the Deleted Folder
        when the email was first deleted using Outlook.com
    Now I'm seeing further synch problems in that deleting in Outlook.com
      The emails disappear from Apple Mail Inbox,
        but do not appear within the Apple Mail Deleted Folder..
          (as it did with the first message I deleted using Outlook.com)
    Yes.. there is some synchronizing problems..
    I just exited Apple Mail, and restarted it, synched
      and now all messages deleted from Outlook.com
        appear within Apple Mail Deleted Folder..
    For Outlook.com the equivalent operation to Erase Deleted Items
      Is to click the Trash icon next to the emails
        within the Deleted Folder..
    Moral of the story is for Apple Mail
      periodically select Erase Deleted Items
      and for Outlook.com
        periodically look in the Deleted Folder
          and delete those emails (that you already deleted)
            a second time..

  • How do you turn your outgoing mail server to online vs offline?

    How do you turn your outgoing mail server to online vs offline

    I had this problem too but I fixed it today. I have been unable to send emails with two of my 4 accounts.
    Go to the mail menu preferences.
    Click on account in question.
    Select the outgoing SMTP mail server (the one offline), this has a drop down list, click on the edit server list.
    Click on the advanced button.
    Make sure use default port is checked.
    Make sure SSL is unchecked (unless your provider requires it, mine does not work with it checked).
    Have authentication set to password.
    User name should be your email address for that account.
    Make sure correct password is entered (for some strange reason my password box was blank on this account).
    Push the ok button.
    For me the SSL box was checked and the password was missing. This is strange to me considering I have unchecked the SSL Box on the mail preference advance page. Also, I went through the complete set up account when I first created the account, why was my outgoing server password box empty?
    I hope this helps.
    Here is a link to some visual aids with the steps from my ISP
    http://support.knology.net/content/smtpauth/smtpredirect.cfm

  • Java newbie wants to set up a java mail server

    hi
    i want to set up a java mail server... but I don't really know how
    I've installed tomcat-apache and a mail server but I don't know how to implement the java part...
    here's an example that i refer to: http://java.sun.com/developer/technicalArticles/javaserverpages/emailapps/
    any step by step guide for beginner like me?
    thanx a lot
    bye

    http://james.apache.org/

  • How can I find out the mail server from email address?

    Hi:
    How can I find out the mail server from email address?
    for example: If I know the email address is [email protected],
    how to find the pop3 and smtp mail server?
    THANK YOU

    You can't tell by the email address since you can pretty much put whatever you want in there (especially if the SMTP server is not filtering anything).
    The header may be able to tell you something. There is a Received header value which looks like it has the routing information although I am not sure if this is a complete trace or just the last hop the message took.
    Sean

  • How to set expanded conversations on Mail ?

    Hi there,
    I need to know how to set expanded conversations on Mail inbox.
    Every time I turn off/on the iMac and open again the Mail, the visualization of mail conversations are unttached again, I mean, I have to manually set to expand all conversations again and again.
    How to fix that ?
    mail > sort by converstation > expand all conversations
    mail > preferences > visualization > ... include related conversations
    I did it all, but they conversations stay expanded only when Mail app is open. If I close it, I'll have to all all over again.
    Hope you can help.
    EBD

    googled! which i should have done prior.

  • Could anybody suggest how I must fix the outgoing mail server-SMTP problem, when it indicates to be offline? I couldn't manage to turn it on. Thank you!

    Hello everybody!
    Could anybody suggest how I must fix the outgoing mail server-SMTP problem, when it indicates to be offline?
    I tried everythind and still couldn't manage to turn it on.
    Thank you!

    Hopefully I solved it....

  • HT204053 how do I change the incoming mail server for iCloud?

    How do I change the incoming mail server for iCloud?

    I'm having the same issue.  It says I need to enter one, but the entire box is greyed out, and I cannot select it to manually change it.  I'm so frustrated!!!

  • How can i erase my .me mails from my iPhone and keep them in the server

    how can i erase my .me mails from my iPhone and keep them in the server

    You can't. The iPhone doesn't actually store all your emails anyway. It is showing you what is on the server directly.
    Only the most recently accessed emails are cached (stored temporarily) on your phone for access when you are offline. If you delete an email from your iPhone, you are actually deleting it from the server.

Maybe you are looking for

  • XML not working in remote host

    Dear colleagues, I've a JSP successfully running locally with J2SE1.4.2 and Tomcat5. The problem is it won't run when uploaded in the remote host. I've spent hours in vain, please help. The program should load an XML file located in the application f

  • Java Concurrent Program .class file location

    Hi frnds, I need to know the .class file location of a java concurrent prog. I know the filename from concurrent program executables and my concurrent program filepath is oracle.apps.xxogl.f04.cp.file. But I dont know where the exact location of the

  • Selection screen event in tbale maintainance generator

    Hi experts,      I had created Table maintainance for Ztable..Now req is i have to some of the delete the entries of table based on input values of user.Now table maintainance displayin all the entries of database table.but before entries to be delet

  • Thinkpad Yoga and UP710E stylus, how do you make them work together?

    So my work just got me a Thinkpad Yoga as per my request I have confirmed that in the Device Manager I do see: "HID-compliant touch screen" I have also gone out on my own and purchased the UP710E wacom stylus, as suggested at various points on this b

  • Use of movement type field (BWART), GR output determination

    while configuring the mail message for Goods receipt, it was detected that this happens only for movement type 101/105. But i want to shoot an mail notification for GR with movement type 103. I tried to use it by creating a new access sequence by cre