How to set up an iMac g3 with new hard drive

I have an iMac g3 grafite se, the person before me forgot their admin password so I bought a new hard drive for it but I don't know how to re install the software I turned the iMac on and I just had a grey blank screen would really appreciate some help please I have an iMac software install disc which say Mac OS version 9.1, I have iMac applications cd, all 4 iMac software restore discs and they say Mac OS version 9.1 , 10.0.3 and a Mac OS X version 10.0.3

I have iMac applications cd, all 4 iMac software restore discs and they say Mac OS version 9.1 ,
Boot from the gray system restore disk marked "Disk 1" by inserting the disk and then restarting while holding the C key. It takes a couple of minutes to boot from a CD or DVD but, when complete, you will have access to an installer. I'd install OS9 first to see if the comptuer works.

Similar Messages

How to set up One iTunes Library with Multiple Hard Drives

Hello,
I have a question about setting up a daisy chain of external storage hard drives for my itunes library and need some advice. I have run out of room on my 4TB external storage. I have an additional 4TB and a 2TB external storage (all are MyBooks) and trying to figure out how to separate out my itunes folder: I would like to put the TV on one 4TB and the Movies and the other 4TB and the Music/Apps/etc on the 2TB. Here are my questions
1.) How to I point my iTunes to where I have moved them? Just make and alias of the folder and put that back in the original folder?
2.) How do I get the new iTunes downloads to go the correct folder to download so it does not set up a new library for downloading? Can I set more that one location in my preference? If so- how?
I have looked in the forums and all the information is older and does not address this exact issue.
Set up:
Mac mini hooked up to Vizio TV running Lion 10.7.2
      Processor 2.26 GHZ Intel Core Duo 2
     Memory 4GB ( do not really store anything on this one)
MY Books
     1 2TB   Mac OS Extended (Journaled)
     2 4TB   Mac OS Extended (Journaled)
     1 1TB   Mac OS Extended (Journaled)- this is for documents, etc
All these are daisy chain with 800 Firewire to the Macmini and hooked to TV with HDMI.
Any suggestions would be helpful. I can not download anything else from iTunes until I get this resolved and it is a real bummer.
Sara

Here are three different methods >
How to use multiple iPods, iPads, or iPhones with one computer, http://support.apple.com/kb/HT1495
This article > iOS: How to transfer or sync content to your computer, http://support.apple.com/kb/HT1296
suggests using contacts groups.
When syncing contacts, you can choose to sync all of your contacts or only selected groups.
You can select a group of contacts to which all new contacts created on your iOS device will be added.
You can set up groups in the Address Book application.
If you are all going to use the same iTunes apps library, turn off "Automatically sync new apps" in the apps tab just below the list of apps. Then you won't get new apps on your device unless you select them.

How do i upgrade my iMac to two TB hard drive start to finish?

How do I upgrade my Imac to two TB hard drive start to finish?

Those are definitely good drives. The OP lists his iMac as a 2011 unit, so it should have a Thunderbolt port on it. If money isn't an object, he could probably put together a RAID unit using Thunderbolt. I think OWC is selling an Thunderbolt hub of some sort. He could do all this, get good performance, and not even need to bother cracking the case. It's a lot easier and convenient working on an external drive than it is having to service an internal drive. He just needs to steer clear of some of the low power/backup drives.
Just my two cents, of course.

Will Time Machine with Leopard Sync With New Hard Drive and Snow Leopard?

My computer is a 20" iMac that I bought in late 2008. The hard drive had trouble so Apple repaired with disk utility. Week later, more trouble so they did full hard drive erase. Data was backed up on Time Machine, 500GB also bought in 2008. After full hard drive erase, and reinstall of basic software, upon reboot, computer would power on then immediately off. It doesn't get past white screen. They advised a new hard drive install is needed.
A computer friend can install a hard drive just fine for me. However, I do not have the Leopard install disc. He could do it with Snow Leopard but I am scared. I'm afraid because my Time Machine last backup was with Leopard, not snow Leopard. I do not have my application discs with me, they are in storage in another state. Thus, if upon adding replacing hard drive and installing Snow Leopard my computer won't be able to sync FILES and APPLICATIONS from Time Machine because its on Leopard I will have a problem.
How can I either 1)Get a Leopard install disc and do that with the new hard drive install OR 2)make sure that a Snow Leopard install with new hard drive won't prevent my Time Machine from being able to install the saved FILES and APPLICATIONS if I don't have original APPLICATION (ie Aperture, Photoshop) with me? Thanks for any help you can provide.

thetrudz wrote:
A computer friend can install a hard drive just fine for me. However, I do not have the Leopard install disc.
Hi, and welcome to the forums.
That Mac should have come with Leopard. If so, call AppleCare. They'll send you replacement discs for a nominal fee.
Once this is sorted out, make a 8-10 GB partition on an external HD or your internal HD, and use the Restore tab of Disk Utility to copy the Install disc to that partition. Then you can boot and run from it instead of the physical disc. It will boot and run much faster, too.
He could do it with Snow Leopard but I am scared.
If he does, and doesn't provide a retail Snow Leopard disc, you must buy one ($29). It's a violation of the license to share software, and you'll need a SL disc to do things like restore a Snow Leopard backup, or the Snow Leopard Apple apps, or repair the internal HD.
Your best bet is to stay with Leopard, at least until you have access to your 3rd-party software discs.
What you can do, however, is borrow his Snow Leopard Install disc (assuming it's a white Retail disc, not a gray one that came with his Mac), and use it to do a full system restore from your backups. That's not a violation of the license, since you don't install or use OSX from that disc; you just use the Installer utility on it to restore the Leopard OSX and all your data from your backups.
See #14 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum), for details.

Can't recover software to Satellite L745-S4210 with new hard drive

Was using the laptop when it completely froze. Used power button to force shutdown. When restarted, hard drive was making a ticking noise and got this error message:
PXE-MOF: Exiting PXE ROM
No bootable device - insert boot disk and press any key.
Setup utility did not show the presence of a hard disk drive. Assumed that hard drive had gone back.
Purchased a new hard disk drive at MicroCenter. Toshiba 2.5-inch SATA 640GB drive, the same drive that came in the laptop from the factory. Also used the opportunity to upgrade RAM from 4MB to 8MB.
Installed new hard disk drive and new memory. Ordered the Recovery Disk set from Toshiba.
At startup, new hard drive doesn't tick. Setup utility sees a Toshiba hard disk drive. Got the "no bootable device" message. Inserted the first disk of the Recovery package and held down the C key, per instructions. System began to respond but then switched to Windows Boot Manager screen.
Here are the error messages:
File: \Boot\BCD
Status: 0xc00000e9
Info: An unexpected I/O error has occurred
Reseated both new hard drive and new RAM. Tried again with same result. Reinstalled old RAM. Tried again with same result.
Now at a wall. What has gone wrong? Is the new hard disk bad? Bigger problem. The unit is outside the factory warranty.
Any help is appreciated.

File: \Boot\BCD
Status: 0xc00000e9
Info: An unexpected I/O error has occurred
I don't understand how that could appear when you boot from a recovery disc with a new hard drive in place. It implies there is something on the drive.
0xc00000e9 "Boot\BCD" "unexpected I/O error "
Maybe try another drive?
-Jerry

How do i intall mountain lion on a new hard drive

How do i do it?
I bought a new 13" MBP a few weeks back and have now got my SSD. I realise that Apple no longer give out OS install discs and i don't have mountain lion purchased on my app store as it came with my laptop. So how do i install mountain lion on my new hard drive without having to buy mountain lion.

Option 1 - Newer Mac's like your come with internet recovery. Which means if your drive fails or is corrupted or in your case your install a brand new drive, internet recovery will let you reinstall the OS you are eligible for. So replace your drive and boot your system with cmd + R keys pressed down for 15 secs or so and your machine hooked to the internet. This will install ML from apple in your case.
Option 2 - Clone or backup (your entire system using time machine) your hard drive to a external USB disk. Replace your drive and then restore the new drive from the clone or backup.
Check this site for related articles .... http://nyacomputing.com/category/os/mac-os-x/

How do I get the os on a new hard drive?

optical drive doesn't work, hard drive crashed. how do I get the os on a new hard drive?

You can connect an external optical drive.
You can use another Mac with a good optical drive together with a Firewire cable if both computers have Firewire ports.
You can have someone clone the installer DVD to an 8 GB USB flash drive.
You can take it to an Apple retailer and see if they will install for you.

How to move/copy Home Folder to a new hard drive?

Hard drive crashed in Snow Leopard, but before it did I pulled off my home folder. I am going to reinstall Snow Leopard on a new hard drive. How do I move/copy my home folder to the new hard drive? The home folder is sitting on an external hard drive that connects via firewire 400. Do I simply recreate the user account on the computer with new hard drive and copy/move the old home folder over to overwrite the new home folder? Looking forward to any suggestions.
David

Normally you can move your exiting home dir to another drive without any problems. For example, see
How to Move the Home Folder in OS X – and Why
But you appear to want to take a home dir from another system and make it the home dir on another system. That may or may not work. The operations are the same, i.e., point to the new home dir via the Accounts system prefs advanced options. But if the account id's are not the same there is going to be permissions problems.
Similarly, you can have permissions problems for the same reason just copying the stuff over the newly created home dir.
If you already know the user id's are the same then I think you may just get away with the substitution.

How to transfer time machine back up to new hard drive

How to transfer time machine back up to new hard drive?

You may like to take a look at this thread... https://discussions.apple.com/thread/4207670?start=0&tstart=0

I purchased creative cloud when I purchased my laptop, I've since had to put in a new hard drive. How do I reinstall the programs on my new hard drive?

I purchased creative cloud when I purchased my laptop, I've since had to put in a new hard drive. How do I reinstall the programs on my new hard drive?

Creative Cloud Help / Sign out, Sign in | Creative Cloud desktop app
http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
Creative Cloud Help / Install, update, or uninstall apps
http://helpx.adobe.com/creative-cloud/help/install-apps.html
Installing Creative Cloud Apps
http://tv.adobe.com/watch/cs6-creative-cloud-feature-tour-for-video/installing-desktop-app s-from-creative-cloud/

Set up issues with new Hard drive

Hi all,
I bought a new hard rive for my late 2008 aluminium macbook. I've got it booted and had issues restroing from time machine back up using the REcovery partition. Such research showed this is an issue and said I should just use migration assistant or via the usual set up when rebooting my macbook with the new hard drive in.
Unfortunately the keyboard does not seem to be responding well of at all and I get stuck part way through the set up process and cant even get to my desktop now.
Any ideas about what is happening and how to solve this???!!
Many thanks,
Greg

time machine backups are specific to the mac that creates them, since you had the HD replaced the time machine thinks it's a different mac therefore it won't let you "restore" the data to the mac. that is why you have to "migrate" from the time machine backup to restore it.
this is done either using migration assistant or during the setup assistant (whichever applies in this case)
if the wireless keyboard is not connecting properly, i would suggest using a USB keyboard and mouse to get the data restored and then go into settings and figure out why it's not connecting correctly.
following article tells how to migrate from time machine backup:
http://support.apple.com/kb/HT4500
hope all goes well for you!

How do you set Automatic Acoustic Management (AAM) for new Hard Drive?

I have a new hard drive that I'm about to have installed into my iMac. The drive is a WD1001FALS (Western Digital Caviar Black 1TB). The only concern I have is that by all accounts it is a bit louder than some other drives, although everything being relative I don't know what that means to me since I've not heard it run yet.
Still, the 320GB drive currently in the iMac is absolutely inaudible and while I'll make some concessions for speed and size I'd like to minimize the amount of noise coming out of the box. I know that the drive supports Automatic Acoustic Management (AAM), however its default state is "disabled". Is there a way, either through the OS or third party software to enable this feature?

I just wanted to close out this question.
I never received a clear answer but in the end I don't need to use the function. My concern was that a new WD1001FALS would be louder than the OEM 320GB HDD in my iMac to the point that I wouldn't be happy with it. Not wanting to trade speed for quiet I passed on the Green caviar and went for the Black. After living with it for several weeks I can say that it is very quiet and while I don't know if it's measurably louder than the old drive, it's not enough for me to notice (and I'm pretty picky).
So, I'm happy with the drive as-is, case closed.

IPad won't sync with old iMac with new hard drive.

The new drive recognizes the iMac, and the photos on the iPad were successfully imported into iPhoto, but 2 home videos on the iMac will not transfer. I have tried to manually drag and drop, different cords and ports, over wi-fi, etc... The Summary box says the iPad has never backed up to this computer, but when I try to do that, it tries and then stops with no error message. The Movies tab has the two videos I want to transfer, but the sync button is gray. I have hard rebooted the iPad and restarted the iMac. Also deauthorized and reauthorized the iMac. I suspect that somehow the iPad is not recognizing the new hard drive. Is that possible? Any suggestions? Thank you for your help!

I don't mean the latest version of iOS. I mean the latest version of iTunes on your Mac.
Open iTunes on your Mac. Click Help and then Check For Updates

How to Replace existing Hard Drive with new Hard Drive, while keeping old files

Hi All,
I have recently replaced my hard drive on my Macbook Pro, with a new hard drive. The old Hard Drive was 160 GB, while the new one is 320 GB.
What I did before replacing it was clone my hard drive using "SuperDuper". I cloned it to the new hard drive and then simply removed my old hard drive and installed the new one with the clone on it. Then I booted it up and began running it. In fact I am using it right now.
My questions are:
Is this a good practice?
Will this work, without problems, indefinitely?
Is this the prescribed way to upgrade ones laptop hard drive?
The reason I did it this way was because I upgraded to Mountain Lion via the apple store download and I do not have the CD for the OS. So I figured if I could make a bootable copy, that might work. So far everything seems fine, but I really just want to know if this will last for a long time. I plan on also making a partition with Windows on it also, so I was wondering if anyone can comment on that too.
If anyone can comment or give any advice on this topic I would really appreciate it.
Thank you very much!
Cheers.

Every thing is fine except Super Duper does not clone the recovery partition. If you start your MBP holding the OPTION key, you should see the internal HDD and the ML recovery partition.
You can reinstall ML or reclone using Disk Utility>restore.
Ciao,.

Replaced Hp with new hard drive but now i cannot install windows 7 recovery disks

Ok, so my laptop is a hp pavilion dv4-2165dx that has a broken screen and sometime after best buy tried to fix it the hard disk blew. I bought a new hard disk and put it in the computer and i got the official recovery and installation disks for windows 7. The hard drive is recognized by the computer and does start the recovery manager but it gets to 1% and does not go further. I let it run all night and the next morning it said that the cd failed. Did it fail because i have to connect an hdmi cord to my lg tv to see anything? Or was it because of something else?
I researched and found that with a new hard drive i will have to partition it and then format it to work with windows 7.
My question is, if the computer doesnt boot or let me use windows how can i partition and format the new hard disk? I have an older hp laptop as well that works efficiently in regard to its age (7) yrs. i wonder if i can buy a usb to sata/ide cord and attach the new disk to my old laptop and partition/format it there? Idk

Hello CaptianNike, welcome to the HP Forums.
I see that you're trying to install Windows 7 on a replacement hard drive. I will try to assist you with this.
You definitely could use another computer to format and partition the drive. I'm not certain about the cables you've mentioned though (looked with goolgle and you can get usb to sata cables). If the computer is a desktop you should be able to connect it internally to just do the format/partition.
If the recovery disks worked correctly, then you should have the option to do the format and partition via Windows. This could be an indication as well that there's an issue with the disks.
Which leaves you with the option of obtaining another set of disks to try, or trying to partition first then installing. The easier would be the latter.
I hope this helps.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

How to set up an iMac g3 with new hard drive

Similar Messages

Maybe you are looking for