How to set up an internet radio with itunes?

I want to set up an internet radio so that when I play musics from itunes, my friends could share to enjoy. I guess this needs to stream from itunes and then broadcast. Nicecast would do the job. But it is not free. Is there another solution? Thanks.

Nicecast is only $40. I use it and it is very easy to use once set up. A few years ago I saw a Quicktime Broadcaster but I never investigated that. It might still exist.
But I would recommend Nicecast. It works right on your computer and depending on your upload capacity you can handle 5-10 listeners.
click to listen to Radio Daddio
Tracy

Similar Messages

  • 10.6.1 Server - how to set up as internet gateway with dynamic IP?

    Hi,
    I installed Snow leopard server 10.6 on a macpro, to share server services (address book, ical, web, mail and VPN) over my office local network, wirelessly (less than 10 computers, all macs).
    I would like to set it as a gateway, as indicated on the manual "getting started", so: Internet > adsl modem > server > Time capsule/extreme (for sharing wirelessly the internet connection and all the services provided by server).
    I don't have a static IP address and i don't have a DNS managed from ISP.
    I tried to read many posts, discussions and apple/resources manuals, but i didn't find out the right way to fix this, with proper configuration of DNS, to keep it standing.
    Which steps should i follow?
    Note: There is a thread from Singapore for setting up server without a static IP, but the configuration is: internet > DSL modem > airport > server (it's not specified how users can connect from outside the network)
    i would like instead to set up the configuration explained above: internet > adsl modem > server > Time capsule/extreme
    Thanks in advance for your help
    Pietro

    Check out this reference material. http://images.apple.com/server/macosx/docs/NetworkServices_Adminv10.6.pdf
    It's a little lengthy and in-depth, but not terribly difficult to walk through.
    In short:
    1.- pick an address range (192.168.1.1-254, for example)
    2.- assign a static ip to your server (192.168.1.1)
    3.- configure your server's network interface to point at your current router (adsl modem), and use your server's static ip for dns lookups
    3.- turn on the dhcp service and configure a scope (192.168.1.20-254, to give you a few addresses at the bottom of the range outside the leasing scope)
    4.- turn on the dns service and configure a forward and reverse lookup zone for your internal domain name (internal.yourcompany.com)
    5.- configure your clients to pull addresses from dhcp
    I'm sure I missed some important stuff, and don't be upset if your neighborhood gets access to your internal resources due to a misconfiguration of your routers acl's.
    If you're still not clear on what to do, bring in an I.T. consultant for a short engagement to initialize and stand up all your services and show you how to support them.

  • How can I connect to internet radio in itunes 11.0.1.12?

    Other answers refer to a radio button next to 'playlists' when 'music' is selected in the library but this doesn't appear on my itunes.

    I'm still not sure what this option (to shuffle a Playlist and then Sync that to the iPod) was or where it was in iTunes 10. This is despite your question having been raised by other people.
    Surely, since you can shuffle a Playlist on an iPod, it's not necessary to shuffle it before Syncing, is it?

  • How do i set up my apple id with itunes and the appstore?

    How do i set up my apple id with itunes and the appstore?

    iTunes 10 for Mac: Set up an Apple ID account for use in the iTunes Store
    http://support.apple.com/kb/PH1726

  • Muse: How to set up a bilingual site with 2 different navigation bars?

    Hi,
    I would like to create a website in 2 languages, desktop and mobile version. The structure of the page remains the same for each language. How should I create the site so that I get one navigation bar for the first language and a second one for the other language? Is it feasible in Muse?
    Thanks for any hint in advance.
    Regards,
    christine

    Hi Christine,
    Some related threads,
    Muse: Multilingual site?
    How can i create a multilingual website?
    how to set up a multilingual website with Adobe Muse and push it live to Adobe Business Catalyst
    Do let me know if you have any question.

  • How to Set JFilechooser to show file with the same extension in the filetyp

    How to Set JFilechooser to show file with the same extension in the filetypes??
    help

    I also don't understand, but if you mean how to display only files with a certain extension in your JFileChooser then you should have a look at the JFileChooser API:
    http://java.sun.com/j2se/1.5.0/docs/api/javax/swing/JFileChooser.html
    The introduction shows an example of how to do that.

  • How to set up iOS calendar app with shared Google Calendar data

    At work (in our small office) I've been given access to the shared Google Calendar that has our work schedule. It was set up using this page (click on Share an existing calendar):
    https://support.google.com/calendar/answer/37082
    The question I have is how to set it up to work with iOS calendar app on my iPhone?

    "currently there is no shared group calendar support."
    Well, not really. You hinted at it with: "set up a group wiki."
    Go into Workgroup Manager and set up an Open Directory group. Add people to it.
    Each client must then go into iCal --> Preferences --> Accounts and add an account. The name and password entered must be the same as that added to the group, Kerberos must be unchecked, and the account URL will be like (fill in the blanks properly):
    http://<your domain name here>:8008/principals/groups/<your group name here>/
    Now each properly logged in user of that group can make changes to the shared group calendar, without any "hacks" like making dummy users and delegation.
    However, I am getting a notifier: "Request Error: Accesss to <event name> in <your group name here> in account <your group name here> is not permitted." But that seems to be a lie, since multiple members of the group can make changes and others can see the changes.
    Oh yea, make sure you have a functioning DNS with valid reverse lookup.
    Message was edited by: Bytesmiths

  • How do I set up my new 5S with itunes when I'm not on my home computer?

    How do I setup my new 5S with itunes when I'm not on my home computer?

    Update the iOS on your new iPhone first then restore the phone from your iCloud backup.

  • I cannot figure out how to set my apple id to use: itunes (two of accounts), apps store and Itunes store. How do I make one password that will be recognixed by all these devices?

    I cannot figure out how to set my apple id to use: itunes (two of accounts), apps store and itunes store. How do I make one password that will be recognized by all these devices? My apple id is constantly not working.

    Hi Lrwill,
    If the apps that are on your son's iPad were purchased under his Dad's Apple ID, then signing your Apple ID onto the iPad will not help you with updating those apps.
    Also, if the iPad was sync'd with his Dad's iTunes library, then hooking it up to your computer/iTunes library, will require you to reset the iPad, and everything that was loaded under the other Library and Apple ID will be wiped out.
    Can you provide a little more info about what was set up under which Apple ID and what iTunes library the iPad was sync'd with?
    Cheers,
    GB

  • Internet Radio through iTunes...

    How do I get my internet radio station onto the iTunes radio list?

    Does this article contain anything useful?
    (24422)

  • How do i connect my apple ID with itunes?

    I keep on trying to sign into itunes with my apple id, but it never works . How do I connect my apple ID with itunes?

    To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use. 
    You may find that when you try to do this, the password for your old ID it isn't accepted.  If this happens, and if your old ID is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • How do you use new ipod nano with itunes 10.6.3?

    How do you use new ipod nano with Itunes 10.6.3.  I have MBP and it lists itunes 10.6.3 as most current version and won't let me install itunes 11

    The seventh generation iPod nano requires at least iTunes 10.7 and Mac OS X 10.6.
    (85225)

  • My iPod Classic is seen by Windows but not by iTunes.  I have reset it, gone to disk mode and it won't show up in iTunes.  There appears to be music on it in a file called MUSICSAVE.  How can I get this to work with iTunes again?

    My iPod Classic is seen by Windows but not by iTunes.  I have reset it, gone to disk mode and it won't show up in iTunes.  There appears to be music on it in a file called MUSICSAVE.  How can I get this to work with iTunes again?

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4 Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
    7. Check for third-party software conflicts.
    <Link Edited By Host>

  • I need specific directions on how to set up 2 iPads to same iTunes account.

    I need specific directions on how to set up 2 iPads to 1 iTune account.  I want both iPads to receive some things alike - calendar, contacts, etc.  I want same book on both but to open to correct page for each iPad reader.  Games on both but levels for each iPad user.

    It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it.
    It sounds as if you have already found the method to change your card details, but just to confirm: go to the iTunes Store. Click 'Account' under 'Quick links' at the right. Log in.
    Where it says 'Payment Information' click on 'Edit' to the right of it.
    You should then be able to enter the correct card details.
    Is this not working? Do you get an error message?

  • How can I sync my iPod classic with iTunes if I only have an iPad?

    How can I sync my iPod classic with iTunes if I only have an iPad?
    I recently downloaded music on my iPad via iTunes, but I can't get it to my iPod. Any help?

    You cannot. There is no iTunes application on an iPad and iPods cannot sync with an iPad.

Maybe you are looking for