How to set up BlazeDS project in FB3?

Hi ,
I want to start a new project with Flex,BlazDS and web
service. web servces are located in other server by SOAP.
I have install BlazeDS in local pc and I do not have a idea
how to start set up in Flex Builder and do the project.
Please help me .Thanks a lot
Mark

Hi,
You don't need BlazeDS for accessing web service unless you
want to use the proxy service of BlazeDS, for accessing the web
service. Please check out the URL below for details on how to
configure FB3 for projects that use server technologies.
http://learn.adobe.com/wiki/display/Flex/Creating+Flex+Builder+Projects+that+Use+Server+Te chnologies
Hope this helps.

Similar Messages

How to set an adapted project dashboard view as initial for all users?

Hi all.
We have the cProjects project dashboard active and have defined (via settings, save as) a custom view with the columns relevant in this particular installation.
I can however only save this view with assignment "user" meaning that it only applies to the user logged on when creating it.
We are however looking to have a common global customized view that all users should begin with.
Compare the R/3 functionality with layout management in reports where you can define whether the layout should be
user specific or not
default
My question is therefore if it should be possible to save global views in the above example and if not how to achieve what we are looking for.
I assume one option could be to see if one can use BADI DPR_EVE_DASHBOARD but it seems this should be possible to handle within the application given that the field "Assignment" is there when you save the view. At the moment only with the value "user" available though ...
Regards / Anders

Hej Anders
You can save a default view for all users under administration mode:
http:<server>:<port>/sap/bc/webdynpro/sap/cprojects?sap-config-mode=X
BR
Matthias

How to set up Firestudio Project with Logic Pro 9

Getting a bit frustrated with this stuff!
I have the system listed below, just purchased a Firestudio Project and can't get audio into Logic Pro. The software that comes with the device records but not with Logic Pro!
I assumed it was an easy thing to get running as most is with my Mac but I am getting frustrated!

I use the local off method but there is another way.
Go to Settings/MIDI and use the "Instrument Without MIDI Thru Function" selector to pick the device and channel your hardware keyboard is transmitting on.
Settings are on a Per Song basis, they're not global like Preferences are.

How do I delete a project in premiere elements

how do I delete a project in premiere elements

Welcome to the forum.
This will depend on how you set up the Project, when you began.
I create a unique folder/sub-folder, for each Project, and everything is in that hierarchy, the Scratch Disks, Copies of all Assets, etc.. When done, I just Delete the Project's folder, and all sub-folders go with it.
One consideration is if there is a chance that you will ever need to revisit that Project, you might use the Project Archiver first, to get a copy of the entire Project onto, say an external HDD - just in case.
How did you set up the Project's folders/sub-folders?
This ARTICLE will give you one workflow.
Good luck,
Hunt

How should I start my project for editing MP4 in Premiere E9

Hello,
I am new to the forums and to video/picture editing in general. The main disconnect I have is with all the different formats and such.
Long story short. I have Premiere elements 9. Im using a Flip Ultra HD (to my understanding it produces MP4).
I was wondering if someone could point me in the direction of the most accurate way to start my project in Premiere elements 9.
Thank you very much in advance to anyone who may be able to help.
-Jeff

You should select the Settings for a Flip Mino/Ultra HD project, then use Get Media to get the files from your camcorder into your computer.
You can see how to set up a project and get media in the first couple of tutorials in my free 8-part Basic Training tutorials at Premiere Elements support site Muvipix.com.
http://forums.adobe.com/thread/537685?tstart=0

How to set the default settment rule for the same kind project.

hi experts:
the project of the same kind of the project profile have the same settment rule to one account (G/L).
how to set the default settment rule for the project of this kind of the project profile.
regards

Hi,
You need to define the settlement profile and allocation structure.
next you need to define the Strategy for settlement rule.
navigation-PS> costs> automatic and periodic allocations> settlement> Settlement rule for WBS
--> Define strategy for settlement rule.
Select the strategy and click on settings. in that new entries, check the Acc Assg element, enter Settlement profile and mention accass category as reposnsible cost center.
Save this transaction.
Now create a project assgin responsible costcenter for the WBS element in the project buider and save the transaction.
Now run CJB2 transaction for the project, settlement rule will generated automatically.
even you can configure the same for profitability segment.
Rgds
Sudhir Reddy

How to set Logo Image for each Project Site Seperately in project server 2010.

Hi,
I want different logo images to be set for each Project Site of different project Separately in Project server 2010.
Scenario is, we have different Project of different client , each client want different logo for their respective Projects.
How to accomplish this task?
Please Help me.
Thanks

Hello. Store the logo somewhere accessible, either in a library at the PWA site collection or on the project site, make a note of the URL to the site then navigate to the project site and depending on what logo you want to update you can click Site Actions
> Site Settings > title and description then update the image URL there. Alternatively, on the homepage of the project site add an image web part then reference the new logo using the URL. Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

How can I programmably extract the project build information set in the project build specification. So I can then use the information in an 'About' dialog.

Extracting Project information
How can I programmably extract the project build information set in the project build specification.
So I can then use the information in an ‘About’ dialog.
Dave

In the labview\resource\appbuild folder their are some VI's that can deal with build specs! They return a variant containing the data!
It's the reason I build a variant probe.
Be aware that the build info is not present in th lvproj file of the built executable!
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

How to set divider line in Project Task List?

Hi
Does anyone know how to set the position of the divider line in project task list?
Thanks

Hi,
As I understand, you would like to customize divider line between task list view and grantt view.
You could press F12 to locate the CSS code of this line, then customize it via CSS style code.
In addition, the line could move by clicking it via Mouse. If you think Gantt view is not clear enough, you could click Zoom in or Zoom out to adjust it.
Regards,
Rebecca Tu
TechNet Community Support

How to set font of a row in DataGrid? (FB3)

I have found examples of how to set the background color of a row based on an attribute of the data item in the row, but I cannot find anything that tells me how to set the font style. Ideally I want to choose either normal or italic based on an attribute which is not displayed in the data grid (as is possible for background color).Can anyone help?
Thanks

The first item renderer post on my blog has an example that colors text
differently. You can use a similar technique to change the fontStyle

How to set up and auto-mirror a networked drive?

So here's the situation. I currently have a MBP Retina 15 (max spec'd), and there are some design processes that still run a little slow for my liking. Given that I spend about half my working life at a desk plugged into a monitor anyway, I figured I'd get a Mac Pro to use when I'm in the office.
What I need help with is how to:
-Set up an external networked drive so that I can open and save all my projects to the same place regardless of which machine I'm working on. I spend 90% of my laptop working time at home on the same network.
-Have the networked drive auto-back up to another external storage device so that in case of HD failure. Basically I want to save a file, and have it expeditiously (ideally instantly, but the sooner the better) back up to the secondary HD.
Somebody at the Apple Store suggested using a USB HD plugged into Airport Extreme, and that would work, I suppose, but
1) I'd really prefer something plugged in to the Mac Pro to speed up the data transfer at least one one machine.
2) There's only 1 USB port on the Airport Extreme. So if we were to go this way, the back up mechanism would need to be built in to the drive -- some sort of double external HD that auto-mirrors.
Any suggestions?

Could you use textarea?
sym.$('inputfiled').html('<textarea cols="20" rows="3"></textarea>);
actually the form I used in the file is:
inputMessage = $('<textarea />').attr({'type':'textarea','rows':'10', 'cols': '25','value':'', 'id':'message'});

How can I move my project from external hard drive to my macbook pro?

How can I move my project from external hard drive to my macbook pro? every time I try to do some editing, the sequence is very slow, thanks in advance

Try here...
Setting-up a new Mac from an old one, its backups, or a PC

How to export all the projects at one time

I got about 20 projects and content about 7000 pics. I don't want to just export project each time, and I would like to just export all of them at one time, is it possible?
I don't know where and how to change the name of the master files, and how to organize them properly. Such as I dragged pics from one project to another album, but if I try to delete the pic in the project, it warns me I will delete the master file as well. In the end, I have so many unwanted pic in the project and I can't delete them. Please help with the organizing ...

Let's start from the whole story. I got too many photos and too many project which taken too much spaces in my computer. So I want to delete those not too good ones and only keep a few in my laptop. On the other hand, some of those not too good ones I want to keep as well. So I use time machine to back up them, but it seems time machine only keep them for about 3 months. In that case, if I delete them, I don't think I would be able to find them after 3 months time.
I am thinking about exporting them to an external hard drive as an extra backup.
Now, another part of the story, I was exploring Aperture, setting up different projects, album and dragging the pics around, then everything becomes a mess. I notice that if I drag a photo from project A to B, then the photo will only appear in B but disappeared in A. But if I drag photo from Project C to album D, both of them would have the pic, delete the pic either in the project or the album, it will warn me that I will delete the master file... I don't know how come.
Therefore, puzzled by where and how they store the master file and how they referenced it, I am here.

How to set proxy authentication using java properties at run time

Hi All,
How to set proxy authentication using java properties on the command line, or in Netbeans (Project => Properties
=> Run => Arguments). Below is a simple URL data extract program which works in absence of firewall:
import java.io.*;
import java.net.*;
public class DnldURLWithoutUsingProxy {
   public static void main (String[] args) {
      URL u;
      InputStream is = null;
      DataInputStream dis;
      String s;
      try {
          u = new URL("http://www.yahoo.com.au/index.html");
         is = u.openStream();         // throws an IOException
         dis = new DataInputStream(new BufferedInputStream(is));
         BufferedReader br = new BufferedReader(new InputStreamReader(dis));
      String strLine;
      //Read File Line By Line
      while ((strLine = br.readLine()) != null)      {
      // Print the content on the console
          System.out.println (strLine);
      //Close the input stream
      dis.close();
      } catch (MalformedURLException mue) {
         System.out.println("Ouch - a MalformedURLException happened.");
         mue.printStackTrace();
         System.exit(1);
      } catch (IOException ioe) {
         System.out.println("Oops- an IOException happened.");
         ioe.printStackTrace();
         System.exit(1);
      } finally {
         try {
            is.close();
         } catch (IOException ioe) {
}However, it generated the following message when run behind the firewall:
cd C:\Documents and Settings\abc\DnldURL\build\classes
java -cp . DnldURLWithoutUsingProxy
Oops- an IOException happened.
java.net.ConnectException: Connection refused
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
at java.net.Socket.connect(Socket.java:452)
at java.net.Socket.connect(Socket.java:402)
at sun.net.NetworkClient.doConnect(NetworkClient.java:139)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:402)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:618)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:306)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:267)
at sun.net.www.http.HttpClient.New(HttpClient.java:339)
at sun.net.www.http.HttpClient.New(HttpClient.java:320)
at sun.net.www.http.HttpClient.New(HttpClient.java:315)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:510)
at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:487)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:615) at java.net.URL.openStream(URL.java:913) at DnldURLWithoutUsingProxy.main(DnldURLWithoutUsingProxy.java:17)
I have also tried the command without much luck either:
java -cp . -Dhttp.proxyHost=wwwproxy -Dhttp.proxyPort=80 DnldURLWithoutUsingProxy
Oops- an IOException happened.
java.io.IOException: Server returned HTTP response code: 407 for URL: http://www.yahoo.com.au/index.html
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:1245) at java.net.URL.openStream(URL.java:1009) at DnldURLWithoutUsingProxy.main(DnldURLWithoutUsingProxy.java:17)
All outgoing traffic needs to use the proxy wwwproxy (alias to http://proxypac/proxy.pac) on port 80, where it will prompt for valid authentication before allowing to get through.
There is no problem pinging www.yahoo.com from this system.
I am running jdk1.6.0_03, Netbeans 6.0 on Windows XP platform.
I have tried Greg Sporar's Blog on setting the JVM option in Sun Java System Application Server (GlassFish) and
Java Control Panel - Use browser settings without success.
Thanks,
George

Hi All,
How to set proxy authentication using java properties on the command line, or in Netbeans (Project => Properties
=> Run => Arguments). Below is a simple URL data extract program which works in absence of firewall:
import java.io.*;
import java.net.*;
public class DnldURLWithoutUsingProxy {
   public static void main (String[] args) {
      URL u;
      InputStream is = null;
      DataInputStream dis;
      String s;
      try {
          u = new URL("http://www.yahoo.com.au/index.html");
         is = u.openStream();         // throws an IOException
         dis = new DataInputStream(new BufferedInputStream(is));
         BufferedReader br = new BufferedReader(new InputStreamReader(dis));
      String strLine;
      //Read File Line By Line
      while ((strLine = br.readLine()) != null)      {
      // Print the content on the console
          System.out.println (strLine);
      //Close the input stream
      dis.close();
      } catch (MalformedURLException mue) {
         System.out.println("Ouch - a MalformedURLException happened.");
         mue.printStackTrace();
         System.exit(1);
      } catch (IOException ioe) {
         System.out.println("Oops- an IOException happened.");
         ioe.printStackTrace();
         System.exit(1);
      } finally {
         try {
            is.close();
         } catch (IOException ioe) {
}However, it generated the following message when run behind the firewall:
cd C:\Documents and Settings\abc\DnldURL\build\classes
java -cp . DnldURLWithoutUsingProxy
Oops- an IOException happened.
java.net.ConnectException: Connection refused
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
at java.net.Socket.connect(Socket.java:452)
at java.net.Socket.connect(Socket.java:402)
at sun.net.NetworkClient.doConnect(NetworkClient.java:139)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:402)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:618)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:306)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:267)
at sun.net.www.http.HttpClient.New(HttpClient.java:339)
at sun.net.www.http.HttpClient.New(HttpClient.java:320)
at sun.net.www.http.HttpClient.New(HttpClient.java:315)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:510)
at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:487)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:615) at java.net.URL.openStream(URL.java:913) at DnldURLWithoutUsingProxy.main(DnldURLWithoutUsingProxy.java:17)
I have also tried the command without much luck either:
java -cp . -Dhttp.proxyHost=wwwproxy -Dhttp.proxyPort=80 DnldURLWithoutUsingProxy
Oops- an IOException happened.
java.io.IOException: Server returned HTTP response code: 407 for URL: http://www.yahoo.com.au/index.html
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:1245) at java.net.URL.openStream(URL.java:1009) at DnldURLWithoutUsingProxy.main(DnldURLWithoutUsingProxy.java:17)
All outgoing traffic needs to use the proxy wwwproxy (alias to http://proxypac/proxy.pac) on port 80, where it will prompt for valid authentication before allowing to get through.
There is no problem pinging www.yahoo.com from this system.
I am running jdk1.6.0_03, Netbeans 6.0 on Windows XP platform.
I have tried Greg Sporar's Blog on setting the JVM option in Sun Java System Application Server (GlassFish) and
Java Control Panel - Use browser settings without success.
Thanks,
George

How to set up external hard drive and FCE 4

I am going to buy an external hard drive (firewire 400) and FCE4 but I am not sure how to set everything up.
Where should I load the software, capture to, and save projects?

FCE should always live on your system drive. Use the external as your Scratch Disk. You will select this in System Settings in FCE. I create a folder on the external for my projects and point FCE to it.
Keep your project files on your system drive as well as your autsave vault if you use that. You can put your other files, such as wavefrom caches on the external, though I leave them on my system drive.
Do not partition the drive. Format as OS Extended

How to set up BlazeDS project in FB3?

Similar Messages

Maybe you are looking for