How to set up bluetooth on printer for wireless printing
hp officejet 100 mobile printer, can it be setup to print from ipad2
Apple mobile devices like the iphone and ipad do not support the required bluetooth printing protocol. There is at this point in time no way to print via bluetooth with those devices. From a mac laptop, or from other bluetooth mobile devices that do support bluetooth printing it would work fine.
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!
Similar Messages
-
How to set HP 4502 to print black only
How to set my HP4502 to print from Mac in black ink only
Hi @floraoverst,
Welcome to the HP Support Forums! I see you would like to print in black ink only on your HP Envy 4502 with your Mac running the Mavericks 10.9 Operating system. Please follow the steps listed below:
Printing with the Black Print Cartridge Only option
Click File and then click Print.
Make sure your printer is selected.
Verify that the Preset option is set to Standard.
In the Copies & Pages menu, select Select Paper Type / Quality.
NOTE:If this option is not available, click ColorSync. Then click the down arrow beside Quartz Filter and change the setting from None to Black & White.
Select the Paper tab.
From the Color option menu, select Grayscale.
Select the Color Options tab.
Select the Black Print Cartridge Only option.
If that option is not listed, then it is not available. The printer will print using only the black cartridge, however, printing with one cartridge will be slower than printing with both cartridges.
NOTE:To save the setting, click the arrow next to Preset and select Save As. Save the Preset option as Black Cartridge Only and then click OK. Then, the next time you want to print with just the black cartridge, select the Black Cartridge Only Preset. -Source
I hope this helps!
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping! -
How to set and save Custom Print Settings in Aperture?
How to set and save Custom Print Settings in Aperture
Hi,
I am printing 12x18" images on 13x19" sheets. I find it difficult to enter the 13x19" dimensions because each value jumps to another random value when I move to enter the second dimension. For instance 13 jumps to, say, 8.5 as I type 19 into the second box. Same with the sheet dimensions.
Also, when I finally get it all correctly, the margins don't set themselves automatically - which I would I expect.
Then, even though I save the setting by clicking Save Setting at the gear below, next time I turn Aperture on, it's all gone.
Any ideas? Thanks.
RaphaelFor me, it is working with these settings, Raphael.
Does your image have a 12x18" aspect ratio? You may want to crop it to the desired aspect ratio before printing.
I can only test with Aperture 3.6 on Yosemite 10.1. -
How to set weblogic 5 or 6 for XSQL servlet
how to set weblogic 5 or 6 for XSQL Servlet
DO you have servlets which print utf-8 data to the client?
If yes then you can just call response.setContentType("text/html;
charset=UTF-8");
and the response will look as expected.
for jsps :
<%@ page contentType="text/html; charset=UTF-8" %> should do the trick.
Nagesh
Michael wrote:
I have the same problem with 7.0. Did you fine a solution?
I'll be very interested to know how you fixed it.
"Danh Hoai" <[email protected]> wrote:
Hi all,
Does anybody know how to set up Weblogic 5.1 server in order to display
UTF8
characters such as Japanese characters?
I am able to display utf8 in Tomcat but not in Weblogic. All I did for
Tomcat is to change the content type of the servlets.
Thank you for your help.
Danh -
How to Set A Default Start Time For New Events In Calendar?
How to Set A Default Start Time For New Events In Calendar?
John,
Thanks for that suggestion - could not get it to work. However, I did manage a different approach. I finally determined the sequence of events in terms of how the various events and listeners fire (I think).
Basically, the CalendarActivityListener fires, followed by the listener associated with the Calendar object's Create facet, followed finally by the CalendarEventListener - the final is where the TriggerEvent is available and then finally, control is passed to the popup/dialog in the Create facet. So, my approach of trying to set/get the TriggerDate in the user's HTTP session was doomed to failure because it was being get before it had been set :(
Anyway, I ended up adding a bit of code to the CalendarEvent listener - it grabs the current BindingContext, navigates through the DCBindingContainer to derive an Iterator for the ViewObject which drives the calendar and then grabs the currently active row. I then do a few tests to make sure we're working with a "new" row because I don't want to alter start & end dates associated with an existing calendar entry and then I define the Start and End dates to be the Trigger Date.
Works just fine. Snippet from the listener follows
BindingContext bindingContext = BindingContext.getCurrent();+
*if ( bindingContext != null ) {*+
DCBindingContainer dcBindings = (DCBindingContainer) bindingContext.getCurrentBindingsEntry();+
DCIteratorBinding iterator = dcBindings.findIteratorBinding("EventsView1Iterator");+
Row currentRow = iterator.getCurrentRow();+
if ( currentRow.getAttribute("StartDate") == null)+
currentRow.setAttribute("StartDate", calendarEvent.getTriggerDate());+
if (currentRow.getAttribute("EndDate")==null)+
currentRow.setAttribute("EndDate", calendarEvent.getTriggerDate());+
*}* -
How to set a default colour & thickness for rectangle in preview?
How to set a default colour & thickness for rectangle(annotation) in preview ? Because every time that I choose for example red and thickness 1 it reverts to orange and 3 next time .
Doesn't appear to be a default setting. Peruse the webpage for Secrets at http://secrets.blacktree.com/ for a possible setting.
-
How to set a new SCSI number for a second drive?
How to set a new SCSI number for a second drive?
WalterWalter,
This web site gives a good diagram:
http://www.hitachigst.com/hdd/support/dpes/dpesjum.htm
On a Quantum hard disk drive - they were the original equipment manufacturer (OEM) hard drive provider for Apple, you will see three or four pairs of pins on the green circuit board. They are labled:
AO . .
A1 . .
A2 . .
If no pins are connected, you have SCSI ID Zero This was the standard setting from the factory.
If you short out the pins beside AO .__. , you have designated SCSI ID One.
If you short out the pins beside A1 .__. , you have designated SCSI ID Two.
If you short out the pins beside A2 .__. , you have designated SCSI ID Four.
These values can be added together to get other SCSI IDs. If you have a jumper beside AO AND A1, that will add up to SCSI ID Three.
Some of the quantum drives used tiny black plastic jumpers with tiny metal contacts. I have yet to find a store that sells the tiny ones. I get my larger jumpers from old PC motherboards that are being thrown away. A small piece of aluminum foil will work as a jumper in a pinch. Just make sure it soed not fall off and short something else out!
Jim
PS
CD-ROM drives are set at the factory as ID 3. Internal drives are set at ID 0. I set my external SCSI drive at SCSI 1 so it does not conflict with the internal drive. Internal Zip drives are set at ID 5 and external Zip drives let you choose between 5 and 6. I set my burners at ID 4. Come up with a master plan for your devices like scanners and burners. Apple System Profiler will give you info on the device ID. If the computer fails to boot, turn off all but one SCSI device and make sure of its ID. Then check each subsequent device by powering up only one device at a time while booting from a CD at ID #3. -
How to set up different ring tone for Facetime
how to set up different ring tone for Facetime
I don't think that on an iPhone that FaceTime has a separate setting, you can only set a ringtone (which will apply to phone calls) via Settings > Sounds, or set different tones for different contacts via the Contacts app - but you can't have a separate sound for FaceTime
-
How to set a default Billing type for a particular Delivery type
Dear All,
How to set a default billing type for a particular delivery type.
My requirement is, we are creating delivery for a Stock Transport Order. Delivery type is NL and the Purchase order type is UB.
When we are creating Billing, it should take Billing type "ZSTO" by default, which is the customised Billing type.
Where we have to do this setting?
In case of normal sales order, this control will be available in the Sales order document types.
In case STO, how to set a default billing type for a delivery type (NL).
Regards,
RajeshThere is a customization available here no default or hard coded
Normally in a sales doc type we mention which billing type system has to pick
If the billing happens from a PO which billing type system will take depends on the controls set in the areas mentioned below
Go to your delivery type OVLK (say your delivery type is NL)
In that there is a field called default order qty in the order reference tab (say if you maintained DL there)
This DL is called PSEUDO order type
Then in VOV8 for DL based on the billing types mentioned ,system will take the billing doc
For delivery related billing say if you mention say ZF8 in the details of DL in VOV8(provided you have created ZF8)
Then while you bill the delivery doc of NL system will take ZF8
For intercompany delivery you can create ZIV billing type also Pure customization
PO is linked to delivery type ( MM spro settings)--Del type linked to order (pseudo) type---in order type (pseudo) we mention the billing types. Here the flow is bit different that pure SD flow
Though the invoice is crated by manually putting customized Biiling Type and A/Cing doc also generated, but in the VF04 still system shows the same deliveries pending with Billing Type (F2).
This manual is not reqd if the said assignments are done properly
Hope it can assist you.
Thanks & Regards
JP
Edited by: J Prakash on Jun 23, 2010 4:05 PM -
In Yosemite this no longer works, has anyone figured this out? How to set a custom default umask for all applications?
I've tried everything to get a custom umask set for all apps. It just seems impossible...
Is there a replacement for launchd-user.conf?Please file a bug report: https://bugreport.apple.com
I am sure this is something that got lost, like environment variables, in the Yosemite/iOS merger. -
How to set the default settment rule for the same kind project.
hi experts:
the project of the same kind of the project profile have the same settment rule to one account (G/L).
how to set the default settment rule for the project of this kind of the project profile.
regardsHi,
You need to define the settlement profile and allocation structure.
next you need to define the Strategy for settlement rule.
navigation-PS> costs> automatic and periodic allocations> settlement> Settlement rule for WBS
--> Define strategy for settlement rule.
Select the strategy and click on settings. in that new entries, check the Acc Assg element, enter Settlement profile and mention accass category as reposnsible cost center.
Save this transaction.
Now create a project assgin responsible costcenter for the WBS element in the project buider and save the transaction.
Now run CJB2 transaction for the project, settlement rule will generated automatically.
even you can configure the same for profitability segment.
Rgds
Sudhir Reddy -
How to set ORACLE_HOMES on Windows 2000 for 11i
How to set ORACLE_HOMES on Windows 2000 for 11i
As am newbie on windows.
Its very urgent.To set ORACLE_HOME on Windows:
C:\> set ORACLE_HOME=<location>
i.e.
C:\> set ORACLE_HOME=d:\oracle\proddb\10.2.0
To verify:
echo %ORACLE_HOME%
In Apps 11i, you do not have to set it manually, just source the environment file and this will set all environment variables for you.
- To source the application env file, run envshell.cmd under %APPL_TOP%
- To source the database env file, run <SID>_<hostname>.cmd under %RDBMS_ORACLE_HOME% -
How to set upper and lower limit for service notification in SPRO
Hello everyone,
Good morning....!!
I am new to SAP PM and to SCN as well.
I have a question on Service notification user status.
I have notification profile configured in SAP as below:
Status no Status Short text Lower limit Upper limit
5 REGD Registered 1 70
10 PCKS Pack sent 1 70
20 APRC Application received 1 70
etc..
I want the statusesto be set as navigation should only allow to go back one by one...like from APRC -->PCKS not to REGD.From PCKS -->REGD etc..not vice versa.
Can enayone explain me to how to set lower and upper limits for these according ot the above requirement.
for more details please check my attachment.
Thanks in advance..!!
Regards,
Sudha.Once you change the status to previous status, just save the order. Then again open the order & try to change the user status.
Just I made replica of your profile. I could able to change (even without saving the order). -
How to set up an iTunes account for my new ipad?
How to set up an iTunes account for my new ipad?
If you already have an iTunes account, simply use that. You do not need a new account.
Open the iTunes app on the iPad. Go to the bottom of the screen and tap Sign in. -
How to set background as white colour for Bitmap images in sapscripts?
Hi,
Can anyone let me know that How to set background as white colour for Bitmap images in sapscripts?Actually,I am getting grey as background as defualt for my Bitmap images.
Sorry,in my previous question,I posted viceversa.I am mistaken.
Thanks,
BalajiHi,
The problem can be solved by changing the way you save the original image.
Take a look at this thread which explains;
Problem with logo
Regards,
Nick
Maybe you are looking for
-
Why my computer suddenly won't recognize my ipod
Can anyone tell me why my ipod classic suddenly is not recognized by itunes? It no longer shows up in my devices.
-
SCOM reports not working, with execute permission denied error.
Operations manager 2012 R2, some reports stopped working. Then i open report and click "add object" or "add group" i get error: Note: The following information was gathered when the operation was attempted. The information may appear cryptic but pr
-
HT3708 Can I not paste a URL into the field? It keeps beeping at me.
Whenever I try to paste a URL into the link field, I get the beep alert. Does Apple seriously expect people to type in entire URLs?
-
Rollback doesn't work in custom BAPI
Hi all, i have a custom bapi that modify a custom dictionary table; modify goes well, but after that, if i get any problems and i would make rollback, it doesn't work and code in table remains modified !!!! Custom bapi is called as follows:
-
WSUS Role on Server 2012 R2 fails - SQL Server Error "Schema Verification Failed SUSDB"
Server is Windows Server 2012R2 After installing the WSUS role with WID, when running the post installation task it installs the SUSDB in single user mode, runs all its scripts but then when it tries to set it it MULTI mode it fails with the error: S