How to set up Buffalo WHR-HP-G300N for use on ADSL...

Hi
I brought a new router, as i am fed up with my BTHomeHub3.
I have a ADSL connection, but the ADSL cable Into the hub, will not fit into the new router. 
Do i have to go out and buy a modem?

What you have bought is a cable router, and is not suitable for ADSL unless you buy a separate ADSL modem. It will work with Infinity only.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

  • How to set up individuals on family sharing for using Facetime - all are saying it's me!

    I've set up family sharing for my wife and kids. Currently all the devices are set up as me and linked to my email address and phone number. how do i separate them onto my wife's email / mobile no and then separate my kids (all under 13) so they can use Facetime etc? thanks!

    Hello Mevster,
    Welcome to Apple Support Communities.
    It sounds like you want to change the Apple ID used by services, like FaceTime, on some iOS devices. Take a look at the article linked below, it provides a lot of information that should answer your question and walk you through the process of changing the Apple ID that's used for services on iOS devices.
    Apple ID: What to do after you change your Apple ID - Apple Support
    Take care,
    -Jason

  • How to set up and configure AirPort Express for AirPlay and iTunes

    Saw somewhere that supposedly there were some apple written guidlines on the above topic. I have searched all over for them. Anyone know where I can get a copy to read through. Just trying to educate myself a bit and sety up another room with access to itunes, radio, etc with high quality speakers and amp off my express.

    Here you go ...
    How to set up and configure AirPort Express for AirPlay and iTunes

  • How to set default User preferences in Analyzer for all users

    How to set default User preferences in Analyzer for all users<BR><BR>Hi,<BR><BR>I would like to set some settings in Analyzer as default for all users. For example:<BR>1. Display | Char<BR>2. right mouse click on char | Chart Properties<BR>3. Axes tab<BR>4. "Format: Currency" i would like to change to "Format: Number".<BR><BR>How to set default values to all users? Is this possible?<BR><BR>Thanks,<BR>Grofaty

    I'm pretty sure higher access superceedes, so you could set up a group with no actual access, just to get the preferences working, then their individual security will dictate what they can do. I haven't tested this fully, but I beleive this is how it will work.<BR>As far as setting the preferences, go into the admin console and right click on the group, then select Preferences. To apply the group preferences to a user, add the user to the group, then right click on the user, select preferences and from the upper left corner, use the drop down to select the active preference, in this case, it will be the group you created and added them to.<BR><BR>HTH

  • How to set user preferred timezone in OBIEE for all objects.

    How to set user preferred timezone in OBIEE for all objects based on users TZ(may be from @{session.timeZone}). without changing My Account -> Preferences

    Check
    Time Zone Specification from http://docs.oracle.com/cd/E12844_01/doc/bip.1013/e12187/T421739T481157.htm#4535403
    just in case https://blogs.oracle.com/xmlpublisher/entry/how_to_keep_your_dates_from_go

  • How to set and resent reconcilation a/c for Assent a/c

    hi
    how to set and resent reconcilation a/c for Assent a/c
    amk

    You are permitted to post the recon account undercertain special circumstances :
    USe the transaction codes OAMK and OASV.
    Kindly read the SAP on line documentation before making a postings directly to the recon account.
    Definition of the Reconciliation Accounts
    You are not allowed to manually post to the reconciliation accounts for Asset Accounting in Financial Accounting. Normally, you designate the corresponding General Ledger accounts in Financial Accounting as reconciliation accounts. This change, however, can no longer be made in Financial Accounting, once these accounts already have balances from the legacy data transfer. However, you can use a special report to assign these accounts the status of reconciliation accounts in Financial Accounting (in Customizing for Asset Accounting, choose Preparing for Production Startup ® Production Startup ® Set Reconciliation Accounts).
    There is another report for removing this specification (Reset Reconciliation Accounts).
    Subsequent Correction Postings to Reconciliation Accounts
    Suppose you have already defined the asset G/L accounts in Financial Accounting as reconciliation accounts, but still need to transfer balances to these accounts, or make corrections. You can make correction postings to these reconciliation accounts with a special posting transaction in Customizing for Asset Accounting (Transfer Balances), using posting key 40 or 50. You can only postings to those accounts in a company code with implementation status (Customizing for Asset Accounting, choose Preparing for Production Startup ® Production Startup ® Activate Company Code).

  • How to set my own gui status when i use selection-screen

    how to set my own gui status when i use selection-screen command
    and
    how to set the names in the application tool bar when function keys are created

    Make sure that you do this in event "AT SELECTION-SCREEN OUTPUT".
    Run Txn ABAPDOCU and check 'DEMO_SEL_SCREEN_STATUS' for sample.
    Also check out following discussion -
    Selection Screen PF-STATUS
    Cheers,
    Sanjeev

  • How to set a minimum width and height for a stage or scene?

    Hello,
    Does anyone how to set a minimum width and height for a stage or scene?
    I tried listening for width/height property value changes and then adjust the width/height if necessary, but that causes unpleasant flickering of the window.
    In JavaFX 2.1 beta SDK for Mac OS, the Stage class has setMinWidth() and setMinHeight() functions which work very well.
    I'm wondering what's the equivalent way to do that when using the FX SDK for Windows.
    Any help is appreciated!
    Thanks.

    I was wondering how to enforce a minimum stage size with JavaFX 2.0.3.The same flickering way you are currently doing it. See: http://javafx-jira.kenai.com/browse/RT-15200 "Need a way to set the minimum size of a window"

  • Without to change the setting.how to set the decimal place to 7 for an UDF.

    Without to change the setting, how to set the decimal place to 7 for an UDF?

    Hi
    Once you create a UDF it will automatically be binded to the data source of data type that you gave at the time of creating UDF.
    So i think you can not set the decimal places without changing the setting in display parameters.
    i am not sure whether it will work or not one thing you can try is that create it as a alphanumeric data type and convert your decimal value to sting and then assign it to UDF,While retrieving for any manipulation you convert it as decimal.
    Hope it helps you
    Regards
    Vishnu

  • How to set up an iPhone as PAN for MacBook Air

    I would like to know how to set up a Personal Area Network for my MacBookAir by using my iPhone.
    I successfully used Bluetooth to pair the two, according to the MacAir, but the iPhone never believed it and insisted that it had found no device to pair to.
    This is after it had presented the correct pairing number with the Mac.
    Thank you.
    Kit

    Create a folder on the external drive named "Music." Copy your /Home/Music/iTunes/ folder into the Music folder on the external drive.
    Now select the iTunes folder on the external drive. Hold down the COMMAND-OPTION keys then drag the iTunes folder icon to your Desktop. This should create an alias named, "iTunes alias." Open the /Home/Music/ folder on your internal hard drive. Drag the iTunes folder to the Trash but do not Empty the Trash. Copy the alias on the Desktop into the /Home/Music/ folder. Select the alias and press RETURN to edit the name. Delete the word, "alias" so that the alias is now simply "iTunes."
    Now open iTunes to verify that you are accessing your real iTunes data. If all is well you can Empty the Trash.

  • Could anyone please let me know how to set a ICC profile with Acrobat dlls using Csharp or VB

    Could anyone please let me know how to set a ICC profile with Acrobat dlls using Csharp or VB

    Cant we even use the dlls in an application?
    In order to automate Acrobat, you need to have Acrobat installed. There is
    nothing you can do with just the DLLs. As was already stated, Acrobat is
    not licensed for use on a server, but regardless of that, it's also
    not technically suitable for server use. You need to find a solution
    outside of Acrobat to solve your problem.
    It also seems that you don't have a good understanding of what is going in
    inside a PDF file. PDF is a very complex file format, and based on
    your questions
    and followup questions, you need to spend a considerable amount of time
    getting familiar with the PDF file format to understand how color works in
    the PDF context. Reader the PDF spec, while paying special attention to the
    section about color. You will find out that if you want to convert the
    color space of a "PDF file", you actually need to convert the color space
    associated with every single object in your PDF file. That is fairly simple
    for vector graphic and text, but when it comes to images, you may have to
    convert the image data. Once you have a good understanding of what it is
    you need to do within the PDF file, then you can start looking for tools
    that allow you to do that. Again, Acrobat and therefore the Acrobat SDK is
    not suitable for this task. If you want to stay with Adobe products take a
    serious look at the PDF Library, which his licensed through Datalogics (
    http://www.datalogics.com/products/pdf/pdflibrary/). As you've mentioned,
    there are other, non-Adobe PDF libraries that you can also use, but this is
    the Acrobat SDK forum, so I won't discuss any of those 3rd party solutions.
    You are wasting your time while looking for a simple solution that does not
    exist.

  • How to set up the "incoming Mail server" for google apss account

    how to set up the "incoming Mail server" for google apss account

    The settings are not generic for all webmail accounts, only your office IT department would know what the server address is for their outgoing email server.  You'll have to ask them about it.

  • How I set my Q5 so that reminders (for appointments, etc.) are displayed on my home screen?

    How I set my Q5 so that reminders (for appointments, etc.) are displayed on my home screen?
    Solved!
    Go to Solution.

    Swipe down from the top of your homescreen and select Settings>Notifications. Near the bottom you'll see in blue letters Lock Screen Settings. Click that and toggle Lock Screen Notifications to ON. Now whenever you have an appointment in your Calendar, it'll show up that day on your Lock Screen.
    Cheers.  
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • How to set the gain and input coupling for each channel on a NI 4462 DaQ card?

    I've seen a few examples in how to set the gain for NI 4462, but none tell me how to chose the channel I wish to set this gain.  Also the same problem with input coupling
    Does anyone know how to set the gain and input coupling for each individual channel?
    Thanks,
    Hector
    LabView 8.5 Windows XP

    Hey Hector,
    http://forums.ni.com/ni/board/message?board.id=100&thread.id=1688
    This has a few examples of how to do that.  Let me know if you have further questions.
    Have fun!
    -gaving

  • How to set the Mail and Fax options  for the Smartforms ???

    How to set the Mail and Fax options  for the Smartforms ??? Please reply me very soon. Its a life deciding question now for me. Please .

    >
    veera Karthik wrote:
    > How to set the Mail and Fax options  for the Smartforms ??? Please reply me very soon. Its a life deciding question now for me. Please .
    Hi
    Check this Link:
    http://help.sap.com/saphelp_nw04/helpdata/en/a5/28d3b9d26211d4b646006094192fe3/frameset.htm
    P.S: Never say reply me soon....people answer you here voluntarily and as everyone has their own desk to manage...sp replies may late or early..depending upon the availabality of the members.
    Vishwa.

Maybe you are looking for